Last Updated： Aggregation Period:Dec 17, 2025～Jan 13, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Dec 17, 2025～Jan 13, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Dec 17, 2025～Jan 13, 2026
This ranking is based on the number of page views on our site.
586～600 item / All 1222 items
Voltage single-phase 100VA, current single-phase 180VA.
In addition to its large capacity and high power, this distortion-free relay tester is equipped with output switchers and DC outputs, demonstrating excellent performance in various testing scenarios.
High-voltage receiving equipment and cogeneration facilities. This single unit supports various digital relay tests.
We have made it possible to conduct various tests related to high-voltage receiving equipment and cogeneration facilities, which were previously carried out by combining multiple models, in a single unit. This can be utilized for protection function tests in commercial facilities, office buildings, and factories. In addition to being compact and lightweight, the design takes actual work conditions into consideration, aiming to improve the workability at maintenance sites. 【Features】 ■ Voltage: 2 phases (up to 300V per phase), Current: 2 phases (up to 31A per phase) Diverse outputs from single-phase to three-phase three-wire (V connection), and unbalanced two-phase ■ Equipped with a microcurrent output range of 20mA (resolution 0.001mA) ■ Easy digital setting for high-accuracy amplitude, phase, and frequency output ■ Built-in counter allows for operation time measurement ■ Supports various protection relay tests Over/under voltage, over/under frequency, short-circuit direction, under power, reverse power, field loss, earth fault overvoltage, earth fault overcurrent, earth fault direction, overcurrent, ratio differential, phase loss/reverse phase ■ CB interlocking tests possible with two-phase current in series ■ Usable with generator sets (inverter type) and portable power supplies *For more details, please refer to the PDF document or feel free to contact us.
Device (tester) for testing current transformers and voltage transformers ★★★ Instruments for distribution boards, control panels, distribution panels, and panels.
This is a device integrated with a standard current transformer (CT) or voltage transformer for testing the ratio error and phase angle of measuring instruments, along with a test load, error meter, etc., equipped with a testing program for data storage and automatic testing (linked with a PC). Features: - Inspection data transmitted to PC via error meter communication program - Built-in standard CT (5A, 1A) and load box (PF 0.8, 5A, 1A) - Price-performance ratio: Easy wiring during installation due to integrated design, reducing inspection time - Safety device installation: Current relay prevents component burnout for step and overload protection CT Tester For inquiries, please contact "lightstar_1979@yahoo.co.jp".
A simple support strength testing machine that contributes to time reduction and cost savings!
"Elefoot" is a simple bearing capacity testing device that allows for easy measurement of ground support strength even in small-scale sites. Weighing approximately 8.0 kg, with a height of 49.8 cm and a maximum width of 67.0 cm, it is lightweight and compact, making it easy to transport. 【Product Overview】 ■ Testing Method: Direct Load Test ■ Determines the presence or absence of ultimate bearing capacity considered in design from the "load pressure - settlement" curve obtained from the test. ■ Target Ground: Cohesive soil to sandy soil with small soil particles in the foundation ground of structures. *For more details, please contact us.
In addition to the conventional digital meter, a graphic meter is now available for selection!
The "Triple Tester" is a combined testing machine for side slip, brake, and speed, packaged into one unit with three functions. It has a permissible axle weight of 3.6 tons, making it suitable for inspections of ambulances and some packer trucks. With a body thickness of 240mm, it is easy to install and suitable for multi-story factories. Equipped with an auto-stop function, it automatically stops the roller motor if the maximum sum of the left and right does not update for a certain period, preventing unnecessary wear on locked tires. 【Features】 ■ Permissible axle weight: 3.6 tons ■ Body size: 240mm ■ Two types of selectable rollers (hybrid embossed roller / grooved roller) ■ Improved visibility and design ■ Capable of displaying the "sum," "difference," and "maximum" of brake measurement values *For more details, please refer to the PDF document or feel free to contact us.
We offer large vehicles with a permissible axle weight of 10 tons and small vehicles with a permissible axle weight of 3.6 tons! You can choose from two sizes: 27 inches and 42 inches.
The "Combination Tester" is a brake and speedometer combined testing machine with improved visibility and design. The "500 Series for Large Vehicles" enhances inspector safety through flattening and is available in two sizes: 27 inches and 42 inches. The "180 Series for Small Vehicles" has a generous capacity of 3.6 tons, accommodating RVs and small trucks, and can also be equipped with an optional SS (gas station) specification. 【Features of the 500 Series for Large Vehicles】 ■ Compatible with a wide range of vehicle types, from light vehicles to large automobiles ■ Displays the hold value of braking force, the sum of left and right braking forces, and the sum of maximum braking forces ■ Capable of measuring speedometers by rotating rollers with a motor; motor ring device installation is also possible (optional) ■ Added graphic meters with excellent visibility and design to the lineup *For more details, please refer to the PDF materials or feel free to contact us.
Brake tester + speedometer tester! Introduction of recommended equipment for quick vehicle inspections!
The "Super Multi Tester" is a brake and speedometer combined testing machine that efficiently conducts inspections of full-time 4WD vehicles using a combination tester with two units at the front and rear. Once the vehicle is driven onto the tester, brake and speed inspections can be measured without moving the vehicle. The wheelbase is automatically set, aligning with the wheelbase of the vehicle that has been driven onto it. This system allows for smooth measurement of the speedometer and front and rear brake tests without moving the vehicle, something that could not be achieved with the traditional combination of "combination tester + fixed free rollers." 【Features】 ■ Recommended equipment for quick vehicle inspections ■ Improved visibility with white digital display ■ Achieves "brake inspection" and "speedometer inspection" without moving the vehicle ■ Reduces effort as there is no vehicle movement during rear brake measurement ■ Customizable to install inspection devices (lifts) on either side of the tester *For more details, please refer to the PDF document or feel free to contact us.
Fine-tuned speed settings are possible! A composite testing machine equipped with a manually adjustable guide roller.
Our company handles the brake and speedometer combined testing machine, the "Motorcycle Combination Tester." By incorporating inverter control into the motoring device, it allows for precise speed settings. The allowable axle weight is 300 kg. As options, we offer front wheel tire clamping devices, rear wheel tire clamping devices, and infrared remote controls. 【Features】 ■ Allowable axle weight: 300 kg ■ Manual movable guide rollers adopted ■ Safe measurement possible even for vehicles with wide tires ■ Applicable tire width for guide rollers: 100–300 mm *For more details, please refer to the PDF document or feel free to contact us.
Ideal for sterile drying of medical devices and equipment! Achieves high cleanliness and temperature control.
We would like to introduce our clean oven, the "AHO-530." Equipped with a programmable temperature controller that allows for step operation. There is also space at the bottom for storing equipment. Please feel free to contact us if you have any inquiries. 【Features】 ■ Maintenance with filter fixation using a snap lock ■ Equipped with a programmable temperature controller that allows for step operation ■ Maximum of 16 patterns and 16 steps for setting time and temperature ■ Space available at the bottom for storing equipment *For more details, please refer to the PDF document or feel free to contact us.
If the walls of the borehole do not collapse, it can be applied to all soil types, rock formations, and depths!
The "In-hole Load Test" involves pressurizing the borehole walls using gas pressure or hydraulic pressure, and from the relationship between the pressure at that time and the displacement of the borehole walls, it determines the mechanical properties of the ground such as the deformation coefficient, ground reaction coefficient, yield pressure, ultimate pressure, and at-rest earth pressure. This method can be applied to all soil types and rock formations at any depth, as long as the borehole walls do not collapse. Since the measurement results can be affected by the finish of the borehole walls, testing devices such as trimmer methods and self-boring types have been developed to minimize disturbances to the borehole walls. [Types of Testing Equipment] ■ Single Chamber Type: Uniform Load Method - The measuring tube consists of a rubber tube measuring cell with one chamber. ■ Three Chamber Type: Uniform Load Method - The measuring tube consists of a main measuring cell made of rubber tube and upper and lower guard cells. ■ Borehole Jack: Uniform Displacement Method - Part of the cylindrical borehole jack consists of a metal loading plate. *For more details, please refer to the PDF document or feel free to contact us.
Obtain a large amount of ground information in a short period! It is possible to measure sandy soils with an N value of around 30 to 50, and cohesive soils with an N value of around 20.
The "Automatic Ram Sounding Test" automatically drops a hammer weighing 63.5 kg from a height of 500 mm, recording the number of blows (Nd) required for the tip cone to penetrate 200 mm. The Nd value obtained from this test is considered to be approximately equal to the N value from the standard penetration test. Note that sample collection, as done in the standard penetration test, is not possible. Additionally, it can measure sandy soils with an N value of around 30 to 50, and cohesive soils with an N value of about 20. 【Test Machine Features】 ■ Dynamic cone penetration testing machine developed by Borro in Sweden ■ Dimensions: Height 2.8m × Width 0.8m × Depth 0.9m ■ Total machine weight: 215 kg ■ Hammer weight: 63.5 kg ■ Hammer drop height: 500 mm ■ Hammer drop frequency: 24 times/minute *For more details, please refer to the PDF document or feel free to contact us.
Compatible with test specimens up to 300mm in diameter! Tests for gravel, coarse-grained materials, and deep ground.
To accurately grasp the strength and deformation characteristics of ground composed of coarse-grained materials such as gravel, it is necessary to conduct tests using specimens of dimensions corresponding to the gravel diameter. The "Repeated Large Triaxial Testing Machine" has been developed to accommodate specimens up to 300mm in diameter. It also has the loading capacity to handle high-strength materials such as soft rocks. In this test, static strength and liquefaction strength, as well as repeated deformation characteristics, permeability coefficient, shear wave velocity, axial strain measurement using LDT, and Poisson's ratio constants can be obtained. 【Obtained Constants】 ■ Static Strength: C, φ ■ Liquefaction Strength: Rl ■ Repeated Deformation Characteristics: G～γ, h～γ ■ Permeability Coefficient: k15 ■ Shear Wave Velocity: Vs ■ Axial Strain Measurement using LDT: E, ε1 ■ Poisson's Ratio: ν *For more details, please refer to the PDF document or feel free to contact us.
