Last Updated： Aggregation Period:Mar 11, 2026～Apr 07, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Mar 11, 2026～Apr 07, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Mar 11, 2026～Apr 07, 2026
This ranking is based on the number of page views on our site.
811～840 item / All 1220 items
A temperature-controlled device for drying, aging, and annealing in a dust-free atmosphere.
◆Depending on the application We also have specialized products for different applications, such as conveyor-type tunnel models, turntable models, safety-enhanced models, semi-explosion-proof models, N2 replacement models, and automatic exhaust and intake systems.
This testing machine analyzes and mechanizes the hand movement of "pressing with fingers" when judging the texture of the fabric, making it possible to convert it into objective numerical data.
Data on compressive rigidity, compressive energy, and recovery properties of various fibers, fabrics, paper, non-woven fabrics, and films can be obtained. It is said that the compressive characteristic data affects the texture's "plumpness," "slipperiness," and "firmness."
It is possible to measure the stiffness and recovery of materials such as fabric, paper, non-woven fabric, as well as hair and films when they are bent.
The measured values are obtained using a force gauge that matches the sensitivity of the fingertips, so they are consistent with sensory evaluations. Accurate measurements can be made even with samples that have different treatments, such as surface treatment or flexibility treatment. It is a pure bending testing machine that is versatile and can be used for various types of objects.
Accurate and rapid measurement of the relationship between small bending moments (stiffness and recoverability when bent) and curvature.
In addition to the conventional micro areas, it has become possible to measure bending stiffness not only of thick sheets with large bending moments, which could not be measured before, but also of composites (products) as well as single materials. Furthermore, the reproducibility of the data is extremely high, and the measurement is simple. It is also widely adopted in the automotive industry.
A tactile testing device that can non-destructively measure the softness of the scalp, the elasticity of the skin, and automotive seats, converting the results into numerical data.
You can analyze how the skin has changed due to the effects of the product under development, or the differences in the effects of the development materials, from the perspective of compressed evaluation.
![[New Product] Multi-functional Desktop Multi-Coater K303S Free Demo Now Available!](https://image.www.ipros.com/public/product/image/dfd/2000714669/IPROS46514392936931752983.png?w=280&h=280)
A tabletop automatic printing test machine capable of gravure printing, flexo printing, bar coating, and full coating/lamination through head replacement.
The tabletop multi-coater has arrived, enhancing operability and reproducibility while maintaining its traditional multi-functionality! 【Features】 ■ By changing the head, you can easily perform bar coating, gravure, gravure offset, flexo printing, and lamination. ■ Coating and printing are possible up to A3 size. ■ Anyone can achieve precise coating without any deviation easily. ■ You can create samples that correlate with the production line using a small amount of ink, reducing waste of expensive materials. ■ Printing and lamination can be done on any flexible substrate, including paper, film, and metal foil. ■ You can print and compare two or more types of ink simultaneously, allowing for alignment for overprinting. ■ Equipped with a touch panel for user-friendly operation. Demonstrations are currently being accepted at the Shin-Yokohama demo room! Download the catalog here▼ https://www.matsuo-sangyo.co.jp/catalogs/ For product details, click here▼ https://www.matsuo-sangyo.co.jp/products/k303-multi-coater/
If you have any issues regarding vibrations, please feel free to consult with us.
We respond with world-class testing technology. We have control devices that comply with most testing standards. We measure and analyze actual testing environments and develop testing conditions. Continuous automatic testing day and night is also possible. We have over 3,000 achievements in our lab business over 15 years. Using our lab network, we provide a wide range of services.
A portable vibration meter equipped with the latest wireless module! It is compatible with Android OS, allowing it to operate on Tablet PCs.
The "Card Vibro Air 2," released at the end of 2012, is a next-generation portable vibration meter that incorporates the latest WiFi wireless module, enabling high-speed data communication. It uses a Tablet PC as the operating terminal and has developed an application that runs on the Android OS. Experience the compact and lightweight next-generation vibration measurement firsthand. 【Features】 ■ Adopts Wi-Fi wireless technology, recognizing multiple sensors ■ Can operate continuously for 6 hours on two AA batteries ■ Waterproof, lightweight, and compact size ■ Built-in large capacity memory of 4Mbit, capable of recording waveforms for up to 30 minutes ■ Equipped with real-time monitoring functionality ■ Can also connect to optional wired sensors *For product details, please request materials or download the catalog for viewing.
![[CT Sample Image] Example of CT Imaging of Engine Parts *With Video*](https://image.www.ipros.com/public/product/image/0f8/2000463547/IPROS38640090441371921869.jpeg?w=280&h=280)
I tried cutting "engine parts" into pieces with NAOMi-CT. *Video included*
The "NAOMi-CT" is a non-destructive testing device that allows for 3D cross-sectional observation of objects made from various shapes and materials without cutting them, from different angles. This time, we will release sample images and videos taken during cross-sectional imaging. 【Target Objects】 Engine parts / Aluminum and metal 【Features of NAOMi-CT】 1. Imaging speed of approximately 16 seconds / Display time of 45 seconds (for the 2.8 million yen CT model) 2. No qualification required for X-ray operators 3. Compact size that can be used on a desk (no X-ray room needed) 【Other Use Cases】 Industrial parts such as aluminum, engine components, aluminum die-cast, monitor cables, as well as food items like frozen foods and fruits, cosmetics such as powder compacts and eyeliners, and inspection of 100 yen shop products. *Please note that some materials may not be suitable for imaging. Inquire for details. We are also accepting sample imaging requests. We can accommodate nationwide at 29 business locations and stores, as well as through delivery. *For more details, please feel free to contact us.
![[Application Example] Wireless Terminal Evaluation Solution](https://image.www.ipros.com/public/product/image/4dc/216632018/IPROS87016134734715152125.jpeg?w=280&h=280)
A solution that enables the evaluation of wireless systems for wireless terminals by creating an environment that minimizes unnecessary radio waves around development and production sites as much as possible.
This is an announcement from Micronics Corporation regarding the "Wireless Terminal Evaluation Solution (Application Materials)." By creating an environment that minimizes unnecessary radio waves around development and production sites, this solution enables the evaluation of wireless systems for wireless terminals. ■□■ Solution ■□■ ■ Protocol (Layer 1-3) Testing via Air Connection - An environment is set up for bidirectional connection using a radio simulator/SG and terminals installed inside a radio anechoic chamber, with transmitting and receiving antennas mounted inside the chamber. - Each protocol (Layer 1-3) test is conducted using the radio simulator. ■ Transmission Characteristics Testing of Wireless Communication Devices via Air Connection - Radio waves emitted from terminals placed on a turntable are received by a receiving antenna installed at the opposite position and output outside the radio anechoic chamber. - By connecting a spectrum analyzer or power meter to the input/output terminals, evaluations of various test items for the transmission characteristics on the radio device side can be conducted. ■ For more details, please download the catalog or contact us.
![Do you have any testing requests related to automobiles? [Testing machine production achievements are currently posted!]](https://image.www.ipros.com/public/product/image/a1d/2000601616/IPROS43708653199309589885.png?w=280&h=280)
Fuel, engine, wheels, suspension, spark plugs, etc. Leave the creation of original testing machines and software to us! Please let us know your testing requirements!
Our company has a proven track record of creating testing machines related to the following. If you have any requests regarding other testing machines, please feel free to contact us. [ Fuel-related ] Injector durability device for poor fuel Fuel pump high-temperature durability testing device Fuel pump durability testing device Fuel pump flow measurement device Fuel pump and SIFS performance measurement device Direct injection Malvern bench [ Engine-related ] Valve seat cold heat testing machine Valve guide sliding testing machine Exhaust system fastening part cold heat fatigue testing machine Durability testing machine related Mud water durability testing machine Boots durability testing machine CVJ durability testing machine Propeller boots durability testing machine Rack boots high and low temperature durability testing machine [ Wheel and suspension-related ] Wheel rotation bending testing machine (VIA specification) Wheel drop impact testing machine (JIS/ISO) Drum durability testing machine Front fork friction testing machine Wheel lateral destruction measurement testing machine Testing machine for suspension and steering [ Spark plug-related ] SP heating load life testing machine SP dielectric strength testing machine Please contact us for other achievements.
Customized strengths available to match the requested testing/research and development, ranging from basic manual and semi-automatic systems to those equipped with [automatic sample transport/automatic burr removal mechanisms/constant temperature chambers], etc.
This is a shock testing machine for metallic materials, designed to achieve a stable structure with sufficient rigidity, ensuring reliable and reproducible test results. The "semi-automatic" feature, which automatically lifts and releases the hammer, reduces the labor and time required for operation and contributes to safety. By combining it with the data processing device we provide, it can automatically import and save data (such as angle and absorbed energy) to a PC, further supporting compliance systems. It is used not only for testing but also for research. If you have any questions, please feel free to contact us. ▼ Instrumentation Software [CHARPAC]* Optional ▼ The Charpy impact testing machine comes with instrumentation software that allows users to view results in graphs and numerical values instead of just visually. The software is developed in-house and can be customized to meet customer needs for ease of use.
We can recreate an environment where the surface temperature of the sample is higher than the ambient temperature!
We will introduce the lamp heating test (infrared irradiation test). The test sample is placed in an environmental test chamber, where the ambient temperature is controlled under a blown air condition, and infrared lamps (up to 7) are used to irradiate light, controlling the temperature of the surface temperature sensors of the sample to be higher than the ambient temperature. For example, it can simulate the stress of overheating due to sunlight in a car interior that has reached high temperatures during the day. 【Features】 ■ Capable of conducting infrared irradiation tests under blown air conditions in an environmental test chamber ■ Can recreate an environment where the surface temperature of the sample is higher than the ambient temperature *For more details, please refer to the PDF materials or feel free to contact us.
Three types of Pb-free soldered products are subjected to reliability tests! We will introduce the main objectives of each test and the results of cross-sectional observations.
We would like to introduce the cross-sectional observation of Pb-free solder after the reliability tests conducted by our company. Pb-free solder assemblies (Sn/Ag/Cu alloy solder) were subjected to three types of reliability tests. We compared the initial products with those after testing to check for the presence of cracks and the growth of intermetallic compound layers. To gradually confirm the durability of the solder joints, such as monitoring crack propagation, the TC test, which allows for cross-sectional observation after each cycle, is recommended. 【Test Conditions】 (1) TC Test (Temperature Cycle) 125℃ for 20 minutes / -40℃ for 20 minutes / 1000 cycles (2) HT Test (High-Temperature Storage) 150℃ for 1000 hours (3) TH Test (Temperature and Humidity) 85℃ / 85% RH for 1000 hours *For more details, please refer to the PDF document or feel free to contact us.
Achieving humidity below 30% with dry air! Introducing the humidity requirements and specifications of key standards in CDM testing.
In ANSI/ESDA/JEDEC JS-002-2014, it is required that the relative humidity near the device during testing be kept below 30%. The verification method involves installing temperature and humidity sensors in two locations near the sample to continuously monitor the temperature and humidity, and the test begins when the relative humidity falls below 30%. The AEC standards also explicitly state in the 2019 revision that they comply with ANSI/ESDA/JEDEC JS-002, and it is expected that the demand for low humidity environments will continue to increase in the future. 【Humidity Requirements for Major CDM Test Standards】 ■ ANSI/ESDA/JEDEC JS-002-2018: Relative humidity below 30% ■ AEC-Q100-011 Rev-D・AEC-Q101-005 Rev-A: Relative humidity below 30% ■ JEITA ED-4701/302A (Test Method 305D): Ambient temperature 25°C ± 5°C *For more details, please refer to the PDF document or feel free to contact us.
It is possible to set the failure criteria (current value)! Evaluate device degradation and characteristics through high temperature and high voltage power supply.
At Aites Co., Ltd., high-temperature reverse bias testing (HTRB) for evaluating the oxide film and junction of power devices can be applied up to 2000V. By monitoring the leakage current during the test, the degradation status of the device can be grasped in real-time. Since the power supply is independent, even if one device fails during the test, it does not affect the other devices. Additionally, it is possible to set a failure criterion (current value) and to cut off the power supply to the device deemed faulty at the time of failure judgment. 【Features】 ■ Real-time monitoring of the leakage current during the test allows for understanding the degradation status of the device. ■ The independent power supply ensures that the failure of one device during the test does not affect other devices. ■ The power supply to the device deemed faulty can be cut off at the time of failure judgment. *For more details, please refer to the PDF document or feel free to contact us.
Send compressed air at the specified pressure and maintain it for a set time! Check for any leaks.
The "Pressure Repeated Test" involves supplying compressed air at a specified pressure to products that require airtightness, checking for any leaks. It is also possible to conduct a durability test that alternates between pressurized and released states, and this can be performed in a heated state in combination with an environmental testing chamber. Additionally, the timing of any leaks can be confirmed from the pressure data logs. 【Device Specifications】 ■ Pressurization Pressure: Max 0.7 MPa (gauge pressure) ■ Maximum Number of Cycles: Max 32,000 cycles ■ Pressure Holding Time: Max 3,000 seconds ■ Monitor: Recording of the pressure sensor values (gauge pressure) during testing ■ Connection with Test Samples: Air tube (connection method can be adapted to the test sample) *For more details, please refer to the PDF document or feel free to contact us.
Support from the design and production of test boards! An effective method to compare the capabilities of multiple products.
We would like to introduce our "Continuous Power Supply Test for Multilayer Ceramic Capacitors." Assuming the failure mode is a short circuit, we can conduct a continuous power supply test under high temperature and high humidity conditions while continuously measuring changes in leakage current. We believe this is an effective method for comparing the performance of multiple products by manufacturer, lot, etc. Additionally, we can assist with the design and production of the test boards. 【Features】 ■ Design and implementation of device mounting boards as needed ■ Compatible with sizes such as 0603 and 1005 ■ The monitoring device connects to the sample via a resistance board to calculate leakage current values ■ After the test, it is also possible to perform capacitance measurements to check the degree of capacitance degradation *For more details, please refer to the PDF document or feel free to contact us.
Evaluation of adhesive strength in high temperature and high humidity environments! Chemical analysis (FT-IR, GCMS, etc.) is also available to elucidate the degradation mechanisms of materials.
We conducted a "moisture and heat resistance test for adhesives" to investigate changes in adhesive strength due to the effects of moisture and heat. The test specimens were placed in a constant temperature and humidity testing machine, and after 500 hours, they were removed to measure the tensile shear adhesive strength. It is presumed that the adhesive strength decreased due to the swelling of the adhesive in a high-temperature and high-humidity environment. We can conduct various environmental tests and strength tests on a variety of materials, not limited to adhesives. Additionally, we also provide chemical analysis to clarify degradation mechanisms. [Test Results] ■ The adhesive strength (breaking stress) of samples placed in a humid heat environment for 500 hours significantly decreased. ■ From the stress-strain curve of the tensile test, a decrease in the modulus of elasticity for both adhesives A and B was confirmed. ■ It is presumed that the adhesive strength decreased due to the swelling of the adhesive in a high-temperature and high-humidity environment. *For more details, please download the PDF or feel free to contact us.
A wide lineup of bundle extraction machines!
We have a wide lineup of "pulling machines" for land and offshore use. Additionally, we also have "self-propelled bases" listed. 【Listed Items】 ■Pulling Machines 【Listed Products】 ■Pulling Machines ・Mef express (for land use) ・Mef express NAVY (for offshore use) ・Mef mobil (for land use) ・Mef mobil NAVY (for offshore use) ・Mef truck ■Self-Propelled Bases ・Van Motor NAVY *For more details, please refer to the catalog or feel free to contact us.
Compact Immunity Test Device CIT-10
The CIT-10 is equipped with functions such as a function generator, signal generator, RF millivoltmeter, and RF amplifier in a compact single unit for conducting immunity tests compliant with the IEC/EN 61000-4-6 standard. With GUI software for system control, it allows for easy self-calibration and CDN calibration, and it is also capable of automatically measuring test contents in accordance with the standard.
2 in 1! Voltage and resistance testing possible with one unit. Cost reduction for coil testing!
The AC/DC withstand voltage and resistance testing machine TH9201 features a "simple" and "compact" design, equipped with cutting-edge technology and interfaces that make operation more convenient, as well as practical functions. It is suitable for transformers, devices, and especially for components used in safe winding inspections.
2 in 1! Voltage and resistance testing possible with one unit. Cost reduction for coil testing!
The insulation resistance/withstand voltage tester TH9310 is an economical and advanced safety tester. It can display small characters, is lightweight, and easy to operate! It can be widely used for safety testing of household appliances, transformers, electrical components, and more.
![[Case Study] Wind Resistance Performance Test of Solar Panel Mounting Structure | Verified at Maximum Wind Speed of 60 m/s](https://image.www.ipros.com/public/product/image/2001521713/IPROS10268967052168640665.png?w=280&h=280)
Recreating super typhoon-class winds! No problem if damage or debris occurs during outdoor implementation.
If you have such issues, please consult with us once. - We want to verify the wind resistance performance of solar panel mounting structures in actual strong wind environments. - We want to evaluate under test conditions that match the shape (such as flat roofs). - We want to obtain materials and data that demonstrate safety during strong winds. - We want to conduct size and wind speed tests that cannot be accommodated by existing wind tunnel tests. [Implementation Example] Upsolar Japan Co., Ltd. Implementation details: We verified whether solar panel mounting structures installed on flat roofs of factories, warehouses, supermarkets, schools, etc., can be safely operated under strong winds. Implementation method: We brought the mounting structure to the Tsukuba Techno Center, where we manufactured the test stand and modified the blower. We conducted tests under conditions close to the actual environment by applying wind from three directions: front, 45 degrees, and 90 degrees.
Dedicated testing device that integrates contact action recording, current waveform recording, and variable power supply.
The circuit breaker/disconnector testing device "TA-300A" is a dedicated testing device that integrates contact operation recording, current waveform recording, and a variable power supply. With this single device, you can conduct opening and closing characteristic tests of circuit breakers/disconnectors in accordance with JEC-2300 and 2310. Thanks to the touch panel display and operation command output buttons, the device is easy to operate even for first-time users, and test results can be quickly confirmed on the screen and printed out. It is a standard device that allows for safe and efficient opening and closing characteristic tests during the completion and regular inspections of circuit breakers and disconnectors. 【Features】 ○ Easy operation pursued with an outdoor-specific touch panel ○ Built-in induced voltage removal circuit ○ Measurement of pre-insertion time for resistive contacts is possible ○ Automatic confirmation of pumping prevention is possible ○ Phase loss testing is possible For more details, please contact us or download the catalog.
Maximum load 500N! Supports various tests such as tensile (compression) tests, bending tests, and peeling tests.
The "QC-528M1F" is a lightweight and compact tabletop universal testing machine with a single-column structure. The system operates on a 100V power supply and uses a stepper motor to control the head's speed with high precision. Additionally, there is no need to input settings when replacing the load cell. It is suitable for testing small samples and can accommodate various samples and tests by switching between multiple grips. 【Features】 ■ Each load cell has pre-registered and saved information. ■ The jog controller allows for precise position adjustments, which is useful for fine-tuning positions and calibrating load sensors. ■ Control via PC is possible with the M1F software. ■ The user-friendly software supports multiple languages. *For more details, please refer to the PDF document or feel free to contact us.
Stroke adjustment according to sample dimensions is possible! We have a variety of grips available.
The QC-508M2F is a compact universal testing machine with a single-column structure that does not require a large installation space. With a maximum load of 2kN achieved through the combination of a servo motor and ball screw, it is suitable for testing standard samples as well as small products. Thanks to the high-functionality M2F controller, it allows for PC control and supports a variety of tests including tensile (compression) tests, bending tests, creep tests, and repetitive tests, offering more than 260 types of analysis menus. 【Features】 ■ Maximum load: 2kN ■ Over 260 types of analysis menus ■ Precise position adjustment with jog controller ■ Optional corrosion protection for load sensors ■ Automatic recognition and calibration function for load cells *For more details, please refer to the PDF materials or feel free to contact us.
User-friendly software supports multiple languages and includes data analysis features.
The QC-508M1F is a compact universal testing machine with a single-column structure that does not require a large installation space. It allows for stroke adjustment according to sample dimensions and is equipped with various types of grips (air grips, thread grips, vice grips, etc.) to accommodate a wide range of tests. Additionally, the optional display enables standalone testing with a PC, allowing for measurement and simple data analysis. 【Features】 - Accurate position adjustment using a jog controller - Corrosion protection for optional load sensors - Automatic recognition and calibration function for load cells - Maximum load of 2kN achieved through a combination of servo motor and ball screw - Control via PC using M1F software - Supports tensile (compression) tests, bending tests, peel tests, and more *For more details, please refer to the PDF document or feel free to contact us.
Automatic recognition and calibration function of load cells! It is particularly used for the evaluation of fibers, threads, and tapes.
The "QC-548D2-M" is a tabletop universal testing machine with a maximum load of 5kN. The technology that controls the equipped DC motor like a high-precision servo motor relies on special motor control and algorithms, allowing for the correction of the rotational speed during motor drive to achieve optimal speed. It also features easy operability, allowing tests to be started simply by pressing a button with digital speed settings. 【Features】 ■ Automatic recognition and calibration function of load cells ■ Easy testing with the device alone ■ Power supply: compatible with 110-240V ■ The D2 controller and 7-inch display can control and analyze data without the need for a PC, functioning independently ■ Tests can be started simply by pressing a button with digital speed settings *For more details, please refer to the PDF materials or feel free to contact us.
