Last Updated： Aggregation Period:Sep 16, 2026～Oct 13, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Sep 16, 2026～Oct 13, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Sep 16, 2026～Oct 13, 2026
This ranking is based on the number of page views on our site.
451～480 item / All 1263 items
A load testing machine that can check how many amperes of actual current are being generated!
【Welding Machine Load Testing Device】 【Features】 1. Adoption of digital display for voltage and current display with phase indication function 2. Display of rotation speed, rotation direction, and frequency 3. Overheating prevention protection circuit, earth check circuit Others Service outlet
Clamp the product with a piston and conduct a leak test in the water tank.
The "Submersion Type Air Tightness Testing Device" is a testing apparatus that clamps the product with a piston and conducts air tightness tests in a water tank. It is ideal for acceptance and shipping air tightness inspections of piping fittings, valves, and pipes. 【Features】 ○ Water submersion testing can be performed simply by pressing the start switch ○ The four sides of the water tank have windows, making inspections easy ○ Designed with safety in mind, featuring a dual start switch that requires simultaneous pressing For more details, please contact us or download the catalog.
A testing device for measuring pencil hardness, which indicates the hardness of a coating film. It can be operated easily, and anyone can achieve the same results in evaluation.
This is a pencil hardness testing machine specified in JIS-K5600-5-4 for scratch hardness (pencil method). When conducting pencil hardness tests by hand, the evaluations can vary depending on the operator, leading to a lack of reliability. By using a dedicated pencil hardness testing machine, differences caused by human factors can be eliminated, allowing tests to be conducted under the same conditions every time. The machine comes with a set of 14 Mitsubishi Uni pencils specifically for pencil hardness testing by the Japan Paint Inspection Association. There are three types available with loads of 750g, 1,000g, and 500g.
With this one item, you can perform all cross-cut tests and grid tests; it is a complete kit.
A multi-cutter guide that can perform cross-cut tests, grid tests, and X-cut tests (at a 30° angle) for thick films over 250μm using adhesion tests. With this single piece, you can conduct tests with 11 lines at 1mm intervals (100 grid tests), 6 lines at 1mm intervals (25 grid tests), 6 lines at 2mm intervals (25 grid tests), 11 lines at 1.5mm intervals (100 grid tests), 6 lines at 3mm intervals (25 grid tests), and X-cut tests (at a 30° angle). Additionally, it can be used for five different applications, including a wet film thickness gauge for measuring the thickness of uncured coatings, a ruler, and a sag tester used for droop tests. The set includes two cutters for JIS-K5600 and JIS-K5400, adhesive tape, and a soft brush.
By bending the coating along the mandrel, we check for cracks and peeling.
This is a testing device for evaluating the flexibility of coatings. It checks the resistance to cracking and delamination of the metal substrate when the coating is bent by a mandrel. According to JIS standards, there are two types: Type 1 and Type 2, and this product corresponds to Type 2. It is considered a suitable testing device for test panels with a thickness of up to 1mm. It is also used for evaluating the flexibility of hard coatings on films. For the standard size of 7mm width (056-1), the 100mm width type (056-70) corresponds to the frequently used test piece size of 70x150mm.
A fully automatic concrete compression testing machine that pursues ease of use and safety!
Marui's "Hiaktis" is a fully automatic concrete compression testing machine. In conventional Amsler-type testing machines, the operation of two hydraulic valves relied on the tester's experience, but "Hiaktis" conducts the entire test automatically until the specimen is destroyed, eliminating individual differences in test results. The operation method is simple; by selecting the "specimen size" and "predicted strength" on the touch panel, compression tests can be easily performed. Additionally, it features a "blackboard display mode" that is convenient for capturing test conditions, as well as safety measures (such as a box-type high-rigidity design, shatterproof transparent cover, and explosion prevention function), making it a reliable and user-friendly compression testing machine. 【Features】 ○ Compact design that does not require a specific installation location ○ High-rigidity frame and comprehensive safety measures, including shatterproof cover ○ Convenient display mode switching for capturing test conditions ○ Intuitive and easy operation via touch panel ○ A variety of options are also available *For details about options and other inquiries, please contact us or visit the product introduction page on our website.
The definitive concrete specimen grinding machine! Triple grinding at the same time, increasing work efficiency by three times!
The "Triple High-Precision Polisher" is a revolutionary device that can automatically polish the end faces of concrete, rocks, and other test specimens simultaneously with three units. Compared to traditional single-unit polishers, it reduces manpower, working time, and installation space by one-third, supporting the efficiency of your testing operations. Additionally, it features a user-friendly design with one-touch specimen fixation using a lever, a simple control panel, and various bases that accommodate different sizes of specimens. Furthermore, we conduct flatness measurement inspections through test polishing at the time of product shipment, ensuring thorough quality control. 【Features】 ● Capping finish is clearly visible ● Safe and quick operation ● Easy specimen fixation with one-touch lever opening and closing ● Comes with an end face inspection sheet for assured product quality
Labor-saving, skill-reducing device! A high-level freeze-thaw testing machine that contributes to environmental improvement.
Marui Corporation is renowned for its technology in manufacturing testing machines that create artificial natural environmental conditions to examine the durability of concrete. Additionally, it develops and manufactures various freeze-thaw testing machines for building materials. 【Product Lineup】 ○ JIS-A Method: MIT-683-1 Type ○ JIS-B Method: MIT-682-1 Type ○ JIS Building Materials: MIT-692-1 Type ○ JIS-A & B Method: MIT-684-1 Type ○ Dedicated for Building Materials: MIT-693-1 Type, and others For more details, please contact us or download the catalog.
A portable small concrete compression testing machine that can be transported to the site! Output to a data logger is also possible!
This is a lightweight and compact simple compression testing machine that can be manually transported to the site. It features continuous loading at a constant load, compatibility with strain gauges, a peak hold function, and the ability to output to a data logger, making it a highly functional compression testing machine despite its simple design. 【Features】 ● Capable of testing compressive strength up to 100 N/mm² ● Lightweight (approximately 60 kg), compact design, and easy to transport and assemble ● Strain measurement is also available as an option ● Load cell and load display can be calibrated to JCSS standards
Efficiently and accurately handle various triaxial tests! Excellent workability allows for smooth testing!
This device is designed with a 4-cell configuration, accommodating specimen widths ranging from φ50 to 75 mm, and allows for independent loading of each cell, enabling test settings and loading to start for each specimen. It efficiently handles a wide range of triaxial tests. To enhance data accuracy, the loading frame is designed with six columns to achieve zero deflection at the center, and displacement gauges are installed for each cell. Additionally, the outer cylinder of the triaxial cell is automatically raised (via an air cylinder), and the cell itself has been miniaturized to save labor and space. Manual control is used for operations other than axial loading, making parts replacement easy. 【Features】 ● Wide range of applicable specimen sizes: φ50×100 mm / φ60×120 mm / φ75×150 mm ● Each cell has independent loading, allowing loading to start for each specimen and enabling adjustable test settings ● The loading frame is designed with six columns, eliminating deflection at the center and ensuring high data accuracy ● Displacement gauges are installed for each cell, allowing for detailed data collection ● The outer cylinder of the triaxial cell rises automatically, improving the workability of test preparation ● Control other than axial loading is manual, reducing costs for parts replacement and other tasks.
The spacing of the pressure plates is wide, and bending tests for box culverts and other structures are also possible!
This is a device for testing the bending strength of precast products and similar items. It has a wide spacing between the pressure plates, allowing for bending tests of secondary products such as box culverts. In load measurement, it detects the directly applied load by disconnecting the hydraulic system and displays it electrically on a measuring scale, enabling the acquisition of highly accurate test data. 【Features】 ● Load measurement is a high-precision type that detects only the actual load by disconnecting the hydraulic system and displays it electrically. ● The effective spacing between pressure plates is wide, allowing for the setup of taller test specimens. ● The loading axis is movable. ● Compliant with JIS A 5371 / JIS A 5372 / JIS A 5373 standards.
With electric and hydraulic servo systems, repetitive bending tests can be conducted at a fast cycle!
This is a device for measuring the bending strength of construction panels and similar materials. It uses an electric-hydraulic servo system, allowing for repeated bending tests at a fast cycle. 【Features】 ● Conducts repeated bending fatigue tests at a fast cycle using an electric-hydraulic servo system ● Can also perform static tests ● Data recording and processing is possible with computer control ● Complies with JIS A 1408 / JIS A 1414 standards
High-precision testing without irradiation unevenness due to specimen position is possible with unique irradiation zone division!
This is a device that can perform thermal deformation tests on full-scale architectural panels. The infrared lamps used for irradiation are controlled by a unique zone division, ensuring there are no irradiation inconsistencies based on the position of the test specimen. 【Features】 ● By combining infrared irradiation and a sprinkling function, it is possible to investigate deformations caused by sunlight and rain. ● The infrared lamps are controlled by a unique zone division, eliminating irradiation inconsistencies based on the position of the test specimen. ● The sprinkling device uses a natural drop method, ensuring there are no inconsistencies in the sprinkling. ● Settings for conditions, test duration, temperature, etc., can be easily operated via a touch panel. ● Equipped with a self-diagnosis function, providing peace of mind in case of any troubles.
Simultaneously capable of testing 3 specimens, with an auto-range specification that eliminates the hassle of load cell replacement! Achieving a significant increase in operational efficiency for soil uniaxial testing!
This device is a groundbreaking testing machine that can conduct "unconfined compression tests on soil" on three specimens at once. Since it has an independent loading system, tests can be started sequentially from the prepared specimens, allowing for efficient testing. The loading is equipped with an auto-range feature, enabling tests across a wide range of loads without the need to change the load cell, and with a maximum capacity of 50 kN, it can also test cement-treated soil and cement milk. Control is fully automated via computer, which also adjusts the displacement speed automatically according to the height of the specimen. During testing, the stress-strain curve can be displayed in real-time, and data is processed and reported in accordance with the standards of the Geotechnical Society. 【Features】 ● Capable of high-load testing for cement-treated soil and similar materials ● PC control automatically adjusts displacement speed according to specimen height! ● All data recording and report preparation are fully automated!
![Consolidation testing machine [No stress calculation required, improving work efficiency!]](https://image.www.ipros.com/public/product/image/548/2000193156/IPROS3144075211829069329.jpg?w=280&h=280)
Lever ratio 28.27:1 design, no stress calculation required! The weights are also small, making work easier!
Marui's "Compression Testing Machine" is designed with a lever ratio of 28.27:1 to match the specimen cross-sectional area of 28.27 cm², allowing for the suspension of weights that have the same mass as the load per cm², eliminating the need for stress calculations. Additionally, the suspended weights are small, making the operation easier, and the impact during suspension is minimal, resulting in almost no effect on the specimen. 【Features】 - The lever ratio is 28.27:1, eliminating the need for stress calculations, and the weights are small, making operation easy. - The counterweight adjustment lever ensures that the self-weight of the multi-lever mechanism does not affect the specimen. - The main frame is designed for rigidity, and the sample container base is reinforced to prevent distortion from long-term use.
The device features a skeleton design without a cover! It is a supercritical CO2 extraction laboratory testing machine with a stirrer included.
The "C-2.0M/C-2.0-S1M" is a supercritical CO2 extraction laboratory testing machine with a stirring device. The "extraction vessel" has a volume of 2000ml (inner diameter φ80mm), a design pressure of 29.9MPa (operating pressure 27MPa), and a design temperature of 140℃ (operating temperature 130℃). Additionally, the "entrainer pump" has a flow rate of 100ml/min (maximum) at 29.9MPa, and the "gas flow meter" has a flow rate of 10-2000L/hr with a temperature range of -10 to 50℃. Please feel free to contact us when you need assistance. 【Specifications (partial)】 <Utilities> ■ Power supply: Single-phase 200V 30A (main unit), single-phase 100V 8A (chiller unit) ■ Dimensions (reference): 1200W × 600D × 1800H ■ Weight (reference): Approximately 200kg *For more details, please refer to the PDF document or feel free to contact us.
The reaction vessel has a structure that can be easily disassembled! Loading and removing samples, as well as disassembly and cleaning, can be done easily.
The "Supercritical CO2 Dyeing Lab Scale Test Machine" can perform dyeing using supercritical CO2. The reaction vessel is heated with a band heater, allowing for free temperature settings. In compliance with the High-Pressure Gas Safety Act, the main equipment used in this device consists of independent units, making it easy to replace during maintenance or specification changes. 【Features】 ■ Power supply uses single-phase 100V ■ Temperature can be freely set (room temperature to max 140℃) ■ Uniform dyeing can be performed within the vessel ■ CO2 supply pump allows for freely adjustable flow rate (max 60ml/min) ■ The reaction vessel has a structure that can be easily disassembled *For more details, please refer to the PDF materials or feel free to contact us.
![[Rental] Load Testing Device 'LE-330D'](https://image.www.ipros.com/public/product/image/2044991/IPROS11077999968798126457.png?w=280&h=280)
Connect the generator to the load testing device and run it in heat operation to discharge the accumulated carbon!
The "LE-330D" is a load testing device that can maintain a constant load rate by applying a forced load using a component called a resistive element. By connecting a generator to the load testing device and running it under heat operation, accumulated carbon can be discharged. Additionally, regular inspections of emergency generators are mandated by law. 【Features】 ■ Carbon treatment for generators compatible with 3rd stage emissions ■ Stabilization of load rate *For more details, please download the PDF or feel free to contact us.
You can easily manage concrete strength on-site.
- Concrete strength can be easily self-managed on-site. - Specimen dimensions: Φ100×H200mm - A transparent protective cover to prevent fragments from the specimen is included as standard. - The display has a running mode and a peak hold mode. - Zero point adjustment performed before testing is done in running mode. - The compression (failure) test is conducted in peak hold mode. - The pressurization speed of the manual hydraulic pump is set at approximately 5.0 kN/second. - At the time of specimen failure, the peak hold mode value will be the maximum load.
Hardness testing in the field, process line, and quality assurance.
◆◇◆【Same-Day Support】 With FTS, repairs and calibrations are handled domestically ◆◇◆ The Echo Chip Bambino 2 is a very easy-to-use and compact model, as well as being low-cost. It can directly display hardness values (HL, HV, HR, HB, HS). There are two types available: the "D type" for measuring flat surfaces, and the "DL type" which is ideal for measuring the bottom of teeth, corners, and welds. 【Features】 ■ Excellent operability, making it ideal for on-site testing without individual differences. ■ High precision with a testing accuracy of ±4HL and excellent reproducibility. ■ Capable of converting to all hardness values (HV, HR, HB, HS, etc.). ■ Can incorporate unique conversion curves. ■ Automatic recognition of impact direction (360°). 【Applications】 ■ All materials such as iron, aluminum, copper, etc. ■ Industries including automotive, steel, aerospace, machine tools, construction machinery, molds, and shipbuilding. ■ Heat-treated products, raw materials, tempered products, cast products, forged products, welds, etc. ■ On-site management, quality assurance management, etc. ■ Total management in production processes, etc.
Hardness testing in the field, process line, and quality assurance.
◆◇◆【Same-Day Support】 With FTS, repairs and calibrations are handled domestically ◆◇◆ The Echo Chip Bambino 2 is a very easy-to-use and compact model, as well as being low-cost. It can directly display hardness values (HL, HV, HR, HB, HS). There are two types available: the "D type" for measuring flat surfaces and the "DL type," which is ideal for measuring the base of teeth, corners, and welds. 【Features】 ■ Excellent operability, making it ideal for on-site testing without individual differences. ■ High precision with a testing accuracy of ±4HL and excellent reproducibility. ■ Capable of converting to all hardness values (HV, HR, HB, HS, etc.). ■ Can incorporate unique conversion curves. ■ Automatic recognition of impact direction (360°). 【Applications】 ■ All materials such as iron, aluminum, copper, etc. ■ Industries including automotive, steel, aerospace, machine tools, construction machinery, molds, and shipbuilding. ■ Heat-treated products, raw materials, tempered products, cast products, forged products, welds, etc. ■ On-site management, quality assurance management, etc. ■ Total management in production processes, etc.
Quality control of concrete, wood, ceramics, bricks, etc.
◆◇◆【Same-Day Service】 With FTS, repairs and calibrations are handled domestically ◆◇◆ The Panzit lab+ is a revolutionary ultrasonic testing machine that enhances the functions of the long-loved "Panzit," which has been effectively used for many years in fields such as concrete, wood, ceramics, and bricks. It allows for various settings tailored to specific purposes, expanding its range of applications.
Concrete compressive strength testing machine capable of real-time sharing of measurement values 【NETIS registration number: QA-200024-A】
It is one of the rebound methods that estimate the compressive strength based on the height (rebound value: R value) to which a hammer strikes concrete and bounces back, and it is a non-destructive testing method that can be performed without damaging the structure. It is also used for estimating the strength of rock formations in addition to concrete. The compressive strength estimation formulas presented at various academic societies are all based on test data from the Schmidt concrete test hammer. Schmidt Live automatically processes troublesome average values and angle corrections, and it also has a moisture content correction function. Since standards such as the Japan Society of Civil Engineers (JSCE G-504) are also registered, strength estimation is easy. It has evolved into a type that can be easily used by anyone without individual differences.
Compared to conventional rebound hardness testers, it is possible to measure lighter samples, smaller samples, and thinner samples!
By adopting a special alumina ball indenter with a diameter of 3 mm, it has become possible to measure lighter, smaller, and thinner samples compared to conventional rebound hardness testing machines. 【Features】 - The world's only product that measures the hardness (rebound coefficient) of samples using micro balls. - No complicated adjustments are needed; testing can be started immediately after turning on the power. - No need to prepare test pieces; both large and small parts can be tested as they are. - Minimal impact on the sample, leaving only a small indentation. - Portable and easy to carry (testing machine: approximately 0.6 kg). - Can be tested in any orientation, 360° (vertical, inverted, horizontal, etc.). 【Measurement Principle】 1. A micro ball (φ3 mm / weight 0.06 g) is collided with the sample, and the speeds on the way in and out are measured to calculate the rebound coefficient e (= speed ratio). 2. If the sample undergoes only elastic deformation, ideally, the speeds on the way in and out will be the same (e=1). 3. If the sample undergoes plastic deformation, the kinetic energy of the micro ball is lost to the extent that it is used to form an indentation, resulting in e<1. 4. The harder the sample and the less it undergoes plastic deformation, the larger e will be; conversely, the softer the sample, the smaller e will be.
Completely non-destructive and very easy measurement of the air permeability of surface concrete! [NETIS Registration Number: QS-150029-VE]
The performance of concrete varies significantly depending on the concrete mix, placement method, type of formwork, and curing method. Therefore, verifying the quality of the surface concrete (cover concrete) is extremely important when considering durability performance. According to Swiss standard SIA 262:2003, "The impermeability of the cover concrete must be checked by permeability tests on cores taken from the structure or from the structure itself." Permatol AC+ can measure the air permeability of surface concrete in a completely non-destructive and very simple manner.
The latest portable ultrasonic hardness tester using the UCI method!
【Features】 - The durability of the diamond indenter has significantly increased (approximately 5 times) - The indentation is very small - Test force can be selected according to the application - The tip shape can be changed by attaching different attachments according to the test area (compliant with ASTM A 1038, DIN 50159-1/2) - Capable of testing a wide range of hardness from aluminum materials to heat-treated steel - Ideal for field testing as it does not depend on the test direction - Can be converted to any hardness scale (HV, HRC, HRB, HB, etc.)
Regardless of the material, it can be measured, and it is also useful for quality control!
It is a hardness testing machine for paper, film, rubber, and resin products. It can measure various products regardless of material, making it useful for quality control. For metal products, it can be converted to HS, HRC, HV, and HB. Additionally, the operation is very simple, allowing even inexperienced users to obtain accurate inspection results.
The air permeability of surface concrete can be easily measured completely non-destructively!
The permeability testing device [Permatol AC+] can easily measure the permeability performance of surface concrete in a completely non-destructive manner. It adopts a two-chamber cell structure that is less susceptible to surrounding influences, and the operation is user-friendly with a touch panel interface. It has various applications, including quality verification of cover concrete, confirmation of the effects of surface modifiers and coatings, and checking the performance of coatings. It is also registered as a NETIS technology (Registration Number: QS-150029-VE).
Made of stainless steel with excellent corrosion and scratch resistance! It can perform both leveling and liquid dripping.
The "Leveling/Tack Test Device" allows for simple comparative tests on leveling and dripping characteristics during film formation and drying periods. Leveling refers to a smooth surface of the cured film. On the other hand, dripping occurs immediately after applying the liquid on a vertical surface, resulting in phenomena such as streaks or drip marks at the edges or corners of the film. Its applicator shape makes it a size suitable for use in the field. The measurements can be taken with simple procedures, minimizing the chance of errors. 【Features】 ■ Conduct simple comparative tests on leveling and dripping characteristics during film formation and drying periods ■ Capable of assessing both leveling and dripping ■ Made of stainless steel with excellent corrosion and scratch resistance *For more details, please refer to the PDF document or feel free to contact us.
