Tester Product List and Ranking from 42 Manufacturers, Suppliers and Companies

Vehicle inspection equipment "Side Slip Tester"

Equipped with axle slip measurement functionality! A wide range of options available from compact cars to large vehicles.

We would like to introduce our vehicle inspection equipment, the "Side Slip Tester." We offer a wide range of models, from light vehicles to large vehicles. Equipped with axle slip measurement functionality for ECO maintenance of large vehicles with two front axles, we also provide a left-right separated model that can be installed on both sides of the inspection pit for large vehicles. 【Product Lineup】 ■WGW-1000BD (Axle weight 10 tons) ■WGT-1000BD (Axle weight 10 tons) ■WG-500CD (Axle weight 10 tons) ■WG-150DD (Axle weight 3 tons) ■WGK-180B (Axle weight 3.6 tons) *For more details, please refer to the PDF document or feel free to contact us.

Company：バンザイ
Price：Other

Measurement and Inspection
Other measuring instruments

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

3D Alignment Tester "Geoliner GL-680XD"

Supports troubleshooting with abundant measurement and adjustment modes! Improved work efficiency through target changes!

The "GeoLiner GL-680XD" is a 3D alignment tester equipped with a variety of measurement and adjustment modes suitable for total diagnostics. As an optical alignment tester, it measures alignment by using a camera unit to assess targets (reflectors) attached to the tires. The camera unit is connected on both sides and is installed at the front of the vehicle, but due to its compact installation position, which is 1.5m from the front target, it minimizes interference with factory equipment. 【Features】 ■ Measurement time is approximately 5 minutes for quick measurements ■ For quick measurements of toe and camber only, the vehicle needs to be moved a total of 30° forward and backward ■ Targets can be easily attached using tire clamps ■ The height of the camera unit can be adjusted using the keyboard *For more details, please refer to the PDF document or feel free to contact us.

Company：バンザイ
Price：Other

Other measuring instruments

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Standard instrument "HI-903"

Measuring on-site with laboratory-level precision! Compatible with a wide frequency range.

The "HI-903" is a compact, battery-operated, self-contained vibration reference instrument. Calibration of individual sensors, switches, data collectors, and their states and accuracy, as well as recording operations, can be verified with a single unit. By using ICP or voltage test sensor inputs, it is possible to directly connect general accelerometers and velocity transducers to confirm output operations. 【Features】 ■ On-site verification of vibration sensors, proximity sensors, and other related vibration monitoring devices ■ Easy to carry and capable of measuring on-site with laboratory-level accuracy at any time ■ Supports a wide frequency range (7Hz to 10kHz) ■ Calibration data can be recorded in internal memory and output to USB flash memory ■ Issuing calibration certificates in Excel format is also easy ■ After delivery, simply turn on the power to start operation immediately *For more details, please refer to the PDF document or feel free to contact us.

Company：BATROSS 東京本店
Price：Other

Other measuring instruments

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Multi-functional Cable Certification Tester 'TestPro CV100'

Test more. Test faster. Test at a lower cost.

The "TestPro CV100" is a multifunctional cable certification tester that provides a comprehensive suite of testing features through hot-swappable test adapters. This product is available as a complete smart building testing kit, eliminating the hassle of trying to find the necessary adapters. Furthermore, there is only one high-performance TestPro platform, which is compatible with all adapters purchased in any kit, allowing for easy addition of features as needed. 【Product Lineup】 ■TestPro CV100-K11: Fiber Certification Kit ■TestPro CV100-K50: Metal Certification Kit ■TestPro CV100-K51: Metal/Fiber Certification Kit ■TestPro CV100-K60: Metal Smart Building Testing Kit ■TestPro CV100-K61: Metal/Fiber Smart Building Testing Kit *For more details, please download the PDF or feel free to contact us.

Company：AEPジャパン
Price：Other

Other measuring instruments

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Bolt tester

No more tripping the circuit breaker due to operator error!

The safety design prevents short circuit accidents at electrical measurement sites, ensuring the safety of operators, while convenient features such as automatic AD/DC voltage detection and voltage testing functions support measurement tasks comfortably! Equipped with a self-diagnosis mode that can check for lead disconnections and display malfunctions! Easy-to-understand backlight display and buzzer sound for measurement status, along with an LED light to illuminate the measurement target! CAT.IV 600V compatible Compact size that can be stored in the chest pocket of work clothing!

Company：博信堂電機商会
Price：Other

Other measuring instruments

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Charging and discharging device, EV charging and discharging device, battery tester.

Gather testing technologies and refine manufacturing skills.

The CE-6000 Module Detection System is a high-precision charging and discharging device specially developed for testing high-power battery packs. It features high dynamic response speed, high stability and accuracy, and multiple flexible channel configurations. It supports pulse testing, cycle life testing, and simulation tests under working conditions. The system has multi-channel input and energy recovery capabilities, significantly saving energy consumed during the charging and discharging processes. It adopts a two-way high-frequency DC conversion topology combined with a high-performance multi-channel 24-bit AD conversion chip. The system's sampling resolution and output stability are higher than those of conventional equipment. *For more details, please download the PDF or feel free to contact us.*

Company：新威技術
Price：Other

Measurement and Analysis Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Basic Knowledge of In-Circuit Testing: What is an In-Circuit Tester?

*Free materials available now! A must-see for those who don't know the basics of in-circuit testers that you can't ask about anymore!

To ensure that electronic devices function correctly, the electronic circuit board within the device must operate normally. The electronic circuit board operates when electronic components are correctly mounted on a printed circuit board (PCB) and power is supplied. The inspection of the electronic circuit board in the state where these electronic components are mounted is called In-Circuit Testing (ICT). An in-circuit tester is a testing device aimed at checking the connection reliability between electronic components and the board, as well as detecting component errors. By inspecting the values of individual electronic components (such as resistors and capacitors) and diode characteristics with minute electrical signals, the board can be tested for quality without imposing unnecessary loads on it. It is also referred to as MDA (Manufacturing Defect Analyzer). Main inspection items: ● Solder shorts and opens ● Pattern disconnections ● Missing components ● Incorrect component values ● Reverse insertion of polarized components ● Lifted leads of ICs and connectors ● Operation verification of digital transistors, optocouplers, and Zener diodes ● Other simple function tests

Company：タカヤ
Price：Other

Measurement and Inspection

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Basic Knowledge of In-Circuit Testing: What are the Advantages of the Flying Probe Method?

This is a must-see for those who don't know the basics of in-circuit testers that you can't ask about now!

In in-circuit testing using a flying probe tester, there are five significant advantages that traditional fixture-based testers do not have. These advantages are: 1. Each time, the position is confirmed with a camera for each inspection board, and the contact position is corrected. There is no need to worry about adjusting the set position. 2. If there is an error due to positional deviation, the contact position can be automatically adjusted, and re-inspection can be performed. There is no need for the operator to manually re-inspect, reducing false reports. 3. The contact speed can be flexibly adjusted. Depending on the areas to be measured, hard and soft contacts can be used interchangeably. 4. Components that cannot be electrically tested can be supplemented with the included AOI inspection function. 5. There are no running costs, no lead time for fixture creation, and no need for storage space. By maximizing these advantages, we enable higher precision and shorter inspection times for circuit boards, contributing to the reduction of inspection costs for our customers. For more detailed information, our sales representatives will provide explanations, so if your company is considering a replacement for fixture-based testers, please feel free to contact us.

Company：タカヤ
Price：Other

Measurement and Inspection

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Case Study] Full Inspection of PCBs Requiring Higher Quality and Reliability

Active in various industries such as automotive, aviation, infrastructure, healthcare, and military!!

We would like to introduce a case where a flying probe tester was implemented for 100% inspection of printed circuit boards, which require a focus on quality and reliability. *Challenges - There are defects that cannot be detected by AOI (Automated Optical Inspection) or X-ray inspection, such as shorts caused by very fine wire-like solder bridges. - Subjecting a shorted PCB to functional testing poses risks such as fire and board failure, and it is difficult to identify the true location of the defect. *Implementation Effects - By utilizing a flying probe tester that inspects the mounting state with fine electrical signals, we were able to identify mounting defects without putting unnecessary stress on the PCB. - By combining it with AOI and X-ray inspection, we were able to further expand the inspection range and improve reliability. For more details on the flying probe tester, please download the PDF catalog or feel free to contact us.

Company：タカヤ
Price：Other

Measurement and Inspection

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Case Study] Electrical Testing from the PCB Prototyping Stage

No need for jig creation or rework!! Enables quick inspection input at low cost!!

We would like to introduce a case where a flying probe tester was implemented for electrical testing from the prototype stage of the circuit board. *Challenges - With a fixture-based tester, it was necessary to recreate the fixture for each prototype, leading to high costs. - When design changes occurred, the fixture also had to be redone, which took time. *Benefits of Implementation - By using a flying probe tester, there is no need to create fixtures; inspection can be initiated immediately by simply creating an inspection program, enhancing quality from the prototype stage. - During design changes, adjustments can be made by simply modifying the inspection program, eliminating extra effort. - From the prototype stage, defective content and causes are quickly fed back to the previous processes, allowing for improvements in circuit board manufacturing design and assembly processes from the early stages of production, thus preventing significant issues close to mass production. For more details on the flying probe tester, please download the PDF catalog or feel free to contact us.

Company：タカヤ
Price：Other

Measurement and Inspection

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Case Study] Immediately after mass production startup (period until jig completion)

Immediately start electrical testing right after the start of mass production, when the defect rate is highest!

We would like to introduce a case where a flying probe tester was implemented during the period leading up to the completion of the fixtures, immediately after the start of mass production. *Challenges - The creation of fixtures for fixture-type testers usually takes about a month, so if there are specification changes just before mass production, it can be difficult to arrange the fixtures in time. *Benefits of Implementation - The flying probe tester can start inspections on the same day as long as the inspection program is created. This allows for immediate inspections right after the start of mass production, when the defect rate is highest, providing reassurance to our customers. For more details about the flying probe tester, please download the PDF catalog or feel free to contact us.

Company：タカヤ
Price：Other

Measurement and Inspection

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Case Study] Analysis of defective circuit boards returned from downstream processes and the market.

Easily identify the faulty areas on the circuit board for anyone!

We would like to introduce a case where Takaya's flying probe tester was implemented for failure board analysis in the quality assurance department. *Challenges Approximately 150 to 200 boards per month are returned from domestic and international markets due to failures. Operators were repairing by searching for defective areas with handheld testers, but it was labor-intensive, so automation was desired. The main causes of defects include component lifting, pattern breaks, and component destruction. Due to the variety of product types and the high cost of creating inspection jigs, inspection using the flying probe tester was introduced. The causes of defects include component lifting, pattern breaks, and component destruction. 〇Results - Faulty components were identified quickly without labor or oversight. - Simple functional testing allows for simultaneous operation testing. - By utilizing the accumulation and analysis functions of inspection results, trends such as differences in failure modes based on the country of shipment for the same board can be fed back into design. For more details about the flying probe tester, please download the PDF catalog or feel free to contact us.

Company：タカヤ
Price：Other

Measurement and Inspection

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Detecting defects in implemented circuit boards with ultra-high-speed inspection. An evolved in-circuit tester.

Top-class industry share! Introduction of the flying probe tester.

The electronic circuit board that serves as the basis for controlling electronic devices is one of the important components used in a wide range of fields. The "Flying Probe Tester" is an inspection machine that quickly and reliably detects various defects that occur during the manufacturing of this board. Takaya Corporation developed and began selling the "Flying Probe Tester" in 1987. It is a pioneering presence in the assembly board inspection machine industry, boasting a top-class share in the market even today. 【Features of the Flying Probe Tester】 ■ Measurement system capable of detecting various component defects ■ Ultra-fast and accurate probe contact control ■ Utilizes unique vertical probes to significantly expand the inspection area ■ Equipped with an interface compatible with smart factory applications ■ Unique clamping mechanism that can accommodate special-shaped boards ■ Function test capabilities with expandability ■ AOI (Automated Optical Inspection) function included ■ +α A diverse lineup and options that can accommodate large boards If you are interested in the flying probe type in-circuit tester or are facing issues with electrical testing of assembly boards, please feel free to contact us.

Company：タカヤ
Price：Other

Measurement and Inspection

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Flying Probe Tester APT-2400F

Equipped with a high-performance measurement system and a variety of functions, it contributes to quality improvement from prototyping to mass production!

The APT-2400F boasts industry-leading probing accuracy capable of inspecting high-density mounted circuit boards, and through its unique control mechanisms and sensing technology, it achieves highly reliable electrical testing in all environments. It is the next-generation flying probe tester. We accept evaluation tests at our demo rooms in Okayama headquarters and Tokyo branch, where you can bring in your circuit boards. We can conduct a series of tests including the creation of inspection programs, testing with actual circuit boards, and summarizing evaluation results. *For more details, please feel free to contact us.

Company：タカヤ
Price：Other

Other measuring instruments

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

BLE RF Tester "RTX2254" *Reduces inspection time through automation.

Automate complex inspections! A tester that contributes to increased inspection speed and efficiency. Demo tests now available *for manufacturing processes of automobiles, medical devices, wearables, etc.

The RTX2254 from RTX Corporation in Denmark is an RF tester designed to inspect the main parameters of the transmission and reception paths of Bluetooth Low Energy (BLE) products. By narrowing down the inspection items to three key areas—carrier frequency offset, output power, and packet error rate (receiving sensitivity)—it achieves a reduction in measurement time. Testing can be completed in as little as one minute, contributing to the efficiency of inspection processes on manufacturing lines. The price is approximately 1 to 1.6 million yen. It addresses challenges such as the need for 100% inspection while minimizing the labor required for system implementation. 【Features】 - Supports BLE 4.0/4.1/4.2/5.0 - 2-channel measurement is also possible (optional) - Can be combined with a shielded box - Provides API commands for customization - Equipped with GO/NG judgment functionality *Additionally, we offer on-site demonstrations. Please apply through the inquiry form below.

Company：東洋計測器
Price：Other

Other measuring instruments
others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Tester Product List and Ranking from 42 Manufacturers, Suppliers and Companies

Tester Manufacturer, Suppliers and Company Rankings

Tester Product ranking