Last Updated： Aggregation Period:Jul 16, 2025～Aug 12, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Jul 16, 2025～Aug 12, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Jul 16, 2025～Aug 12, 2025
This ranking is based on the number of page views on our site.
226～240 item / All 308 items
This is an analog tensile testing machine, the Techno Tester, designed for simple operation while pursuing simplicity and functionality. The maximum load is 6 kN.
It is ideal for verification load testing in building equipment.
The display unit is a tensile testing machine for managing analog-style construction equipment on site. The maximum load is 20 kN.
It is practical and compatible with almost all sizes of metal expansion anchors.
This is a multifunctional anchor bolt tensile load testing machine equipped with internal memory functionality. The maximum load is 300 kN.
*Units are displayed only in kN. (There is no display in tf.)
This is an ultra-lightweight post-installed anchor tensile load testing machine with a body weight reduced to 11 kg. The maximum load is 200 kN.
It is a testing machine that emphasizes operability, being easy to use, lightweight, and compact.
A pressure-type seal strength testing machine widely used in the pharmaceutical, cosmetics, and food industries. It is a device for testing the seal strength of pouch and tube products.
* For more details, please visit our website → http://www.jp-factory.co.jp/eng/ * Contact: Morioka from the Machinery Division 【Mobile: 080-3108-5647】 - This is a minor change model of the old JY-1507 type. - Measurement starts with a one-push operation. - Compact, lightweight, and space-saving tabletop model. - Measurement range is 1 to 150 Kg. - Alarm sounds with a buzzer in case of seal failure. - Pressure and timer during seal failure are held for display. - Power supply: AC100V - Air source: 0.2 to 0.7 MPa - Calibration services are also available, including for the old JY-1507 type.
![Digital Point Load Tester (Point Load Testing Machine) [No Power Required!]](https://image.www.ipros.com/public/product/image/1c1/2000205542/IPROS8249015582752429775.jpg?w=280&h=280)
No power supply needed, usable on-site! For tensile strength testing of unshaped rock and concrete specimens!
This is a testing device that can perform tensile strength tests on materials such as rock or concrete using non-shaped specimens. It can be used not only in laboratories but also on-site. The mechanism calculates and determines the tensile strength by applying point loads at two tips of the specimen.
Improvement of inspection speed! Scalability of applications with Windows 2000.
"Focus2000" is a network integrated circuit tester capable of direct measurement control using a general-purpose computer. Kyoritsu Electric has acquired all patents and copyrights for computer programs, including industrial property rights and inventory assets (products, semi-finished products) from Tescon, which had a top-class share in the semiconductor testing field, and is engaged in manufacturing, sales, and after-sales service at Kyoritsu Test Systems Co., Ltd. Additionally, we have developed and are selling this product, which far exceeds conventional performance, as well as models equipped with Agilent's test jet functionality. 【Features】 ■ Improved inspection speed (1.5 times compared to our conventional models) ■ Expandability of applications using Windows 2000 ■ Miniaturization (1/3 the size of our conventional models, measurement unit dimensions = W425*D435*H590mm) ■ Direct measurement control using a general-purpose computer *For more details, please refer to the PDF materials or feel free to contact us.
A comprehensive product line and plans for further new units! Achieving easy deployment for diverse usage forms.
The "Focus FX Series" is a product that modularizes the functions of a multifunction tester. Each module is pocket-sized. By connecting it to a computer with a USB cable, it quickly transforms into a personal measuring device. Additionally, you can freely combine short open testers, digital multimeters, oscilloscopes, function generators, and various I/O to construct the necessary function tester. 【Features】 ■ Modularization of function inspection capabilities for circuit boards, achieving low cost and compact size ■ Can operate as a measuring instrument when connected to a computer, and can also function independently as a measuring part ■ Controlled via USB bus (Ver.2 High Speed) ■ Measurement is possible with USB cable connection ■ The function test program generator enables standardization of inspection programs *For more details, please refer to the PDF materials or feel free to contact us.
By adding a multiplexer board with 128 pins per board, it can be expanded up to a maximum of 1,024 pins!
The "Focus-3000 Mini Box" is a compact, tabletop in-circuit tester. The tester can perform inspections on its own. A computer is only connected via USB for modifications when necessary, such as changing test programs. By adding a multiplexer board with 128 pins per board, it can be expanded to a maximum of 1,024 pins. Additionally, since everything other than the tester itself is optional, various testing configurations are possible. 【Features】 ■ Compact tabletop size ■ Inspections can be performed with the tester alone ■ A computer is connected via USB for modifications only when necessary ■ Various testing configurations are possible due to optional settings for everything other than the tester itself *For more details, please refer to the PDF document or feel free to contact us.
The compressive strength of concrete can be measured non-destructively.
- It is used for testing the strength and integrity (deterioration, peeling, lifting) due to impacts on the concrete surface. - It is capable of measuring the strength of high-strength concrete. - It can be connected to a computer via a USB cable, allowing measurement data to be imported to the computer as a CSV file.
[Made in the USA] A dedicated inspection tool for coaxial cables with enhanced functionality, efficiently grasping signal quality! - Utilizing proprietary technology, American-made cable tester.
The Coax Clarifier series [CC200 model / CC210 model / CC220 model / CC250 model / CC260 model] is a coaxial cable tester that utilizes proprietary technology developed by Live Wire Inc. ~Control Signal Quality~ The CC series, which applies TDR patented technology, distinguishes itself from conventional coaxial cable testers by displaying the cable's signal strength in decibel values (dB). This allows for a more detailed assessment based on actual signal strength, compared to the relative strength indicated by the number of bars. ~Easily Understand Cable Layout~ By using the Coax Clarifier series in conjunction with a dedicated remote unit for coaxial cables, users can easily grasp the layout of cables within walls and the relative positions of various sockets and jacks indoors, significantly improving the efficiency of workers. ~Dedicated to Coaxial Cables with Rich Features~ ● Made in the USA ● Excellent shielding and interference resistance ● Widely applicable for diagnosing cables in surveillance cameras, video monitoring, and audio-visual transmission systems. ● Inspects cable length, signal transmission quality, cable fault points, and the quality of splitters. It serves as a compact tool that fulfills the role of large inspection equipment.
Two different blades are available! They are designed to maintain a sharp cutting edge.
The "Cross Cut Tester Kit" is used to measure the adhesion of parallel grooves in single-layer or multi-layer coatings applied over a substrate. The cross cut tester blade is made of hard alloy steel and is designed to maintain a sharp cutting edge, featuring a low replacement frequency. Two different blades are available: one with six cutting edges (multi-cut blade) and another with a single blade. 【Product Composition】 ■ Blade-equipped cross cut tester ■ Hex wrench for blade replacement ■ Magnifying glass ■ Cleaning brush ■ Plastic carrying case ■ Operating manual ■ One roll of adhesive tape *For more details, please refer to the PDF document or feel free to contact us.
The slot on the base of the frame holds unused rods! We offer two types of mandrel bending testing machines.
The "Cylindrical Mandrel Tester" provides indicators of the elongation and adhesion of the coating film by bending a metal sheet coated with a consistent radius. In the ISO version, tests can be conducted on panels up to 65mm wide. In the ASTM version, panels up to 14cm x 22cm can be tested. Additionally, there is a "Conical Mandrel Tester" that allows for the elongation of the coating film along an extended gradient, enabling accurate measurement of adhesion. 【Features】 <Cylindrical Mandrel Tester> ■ISO Version - Made of anodized aluminum - 12 mandrels made of stainless steel ■ASTM Version - V-shaped cut to hold the mandrel during testing - Slots in the base of the frame hold unused rods *For more details, please refer to the PDF document or feel free to contact us.
Introducing our lineup of relay testers! Features and applications are included.
We would like to introduce our "Signal, MEMS, MOSFET, Relay Testers." Our lineup includes the "MEMS Burn-In Tester," capable of burn-in processing for up to 1000 channels of devices, the "MOSFET Relay Tester" compatible with 4a array products, and characteristic testing equipment. This document outlines the features and applications of various testers. The listed tester devices are examples of our delivery achievements. We also accept customization according to your needs, so please feel free to contact us. 【Featured Products】 ■ Life & Characteristic MEMS Relay Tester ■ MEMS Burn-In Tester ■ Life & Characteristic Relay Tester ■ MOSFET Relay Tester *For more details, please refer to the PDF document or feel free to contact us.
A wide lineup is available based on the number of points! High-speed, high-precision inspection tester [continuity testing, insulation testing, four-terminal testing, micro-short detection].
The "Type E" is an electric testing machine that achieves high-speed and high-precision inspections. It features a compact design that does not take up much space, allowing it to be placed on a desk. We offer a wide range of options to choose from based on the inspection requirements, including the number of points, high-precision four-terminal testing, and micro-short testing. Additionally, it can be connected and used with hand presses or jigs that you may already own. 【Features】 ■ A tester that forms the core of the electric testing system "TY-CHECKER series" ■ Compact design ■ Abundant options ■ Excellent versatility #CircuitBoardInspection #TestingEquipment #PowerOnTesting #ElectricTesting #Continuity #Insulation #ShortCircuit #OpenCircuit #FourTerminal
