Metal fittings(20mm) - List of Manufacturers, Suppliers, Companies and Products

Last Updated： Aggregation Period:Jul 16, 2025～Aug 12, 2025
This ranking is based on the number of page views on our site.

Metal fittings Product List

46～60 item / All 74 items

Displayed results
Folding door hardware for interior doors "FSD-HDC"

Folding door hardware for interior doors "FSD-HDC"

Equipped with a soft-close feature that reduces impact during opening and closing! Also prevents forgetting to close the door.

The "FSD-HDC" is a folding door hardware recommended for space-saving indoor doors. The roller holding part is made of metal, and the damper sliding part is made of resin. Each component has been re-evaluated in terms of material to achieve quieter and smoother movement. By simply changing the fixed block at the top to a damper, it has become possible to support the soft close function on the opening side, which was previously difficult. 【Features】 ■ Soft close on both sides ■ Space-saving design ■ Non-rail design suitable for various usage scenarios ■ Smooth opening and closing ■ Double-opening design ■ Difficult to pinch fingers *For more details, please refer to the PDF document or feel free to contact us.

  • Interior/Interior Doors
  • Folding doors/accordion doors
  • Other fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
York Fitting "YS-1"

York Fitting "YS-1"

When working on an inclined surface! It prevents the belt from tightening around the waist, allowing for easier work.

Fujii Electric Co. offers "yoke fittings." Using yoke fittings prevents the belt from tightening around the waist while working on slopes, allowing for easier work. 【Features】 ■ Prevents the belt from tightening around the waist on slopes ■ Allows for easier work *For more details, please refer to the PDF document or feel free to contact us.

  • Safety and consumables

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Eagle II Horizontal Roofing Series Snow Stopper Bracket

Eagle II Horizontal Roofing Series Snow Stopper Bracket

A smart shape that matches the roof. Increased blade strength with edge folding and a strong bead.

The "Eagle II Horizontal Roofing Series" is a snow stop bracket compatible with horizontal roofs. It features a smart form that matches the roof, with edge folding and a strong bead to enhance the strength of the wings. We offer a wide lineup suitable for both retrofit (existing buildings) and pre-installation (new construction) applications. You can choose from various colors to match the appearance of your roof. 【Main Specifications】 ■ Wings - Plate thickness: 1.6mm (1.5mm for stainless steel) - Material: High corrosion-resistant steel plate, hot-dip galvanized, SUS304 ■ Feet - Plate thickness: 2.0mm - Material: High corrosion-resistant steel plate, hot-dip galvanized, SUS304 ■ Quantity 30 pieces *For more details, please refer to the PDF document or feel free to contact us.

  • Roof and gutter construction
  • Metal roof
  • Others/Roofing materials (shingles, cement, steel sheets, aluminum)

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Fall Prevention Locking Hardware 'DLP-LOCK1'

Fall Prevention Locking Hardware 'DLP-LOCK1'

Easily attachable during construction or inspection! Prevents falling accidents in advance!

"DLP-LOCK1" is a fall prevention locking device that can be used with all products in the LED spotlight SL series. By adding the DLP-LOCK1, the inherent locking function of the plug, combined with the fall prevention wire, ensures even greater safety. It is designed to be easily attached during installation or inspection. 【Features】 ■ Easily attachable during installation or inspection ■ Ensures greater safety by combining the locking function with the fall prevention wire ■ Dimensions: 39.44mm × 32.00mm ■ Weight: 3.0 grams ■ Material: SUS301 *For more details, please refer to the PDF document or feel free to contact us.

  • Joints between components

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Seismic reinforcement hardware "FIT Power" Type 14 for concrete block walls, etc.

Seismic reinforcement hardware "FIT Power" Type 14 for concrete block walls, etc.

Can be installed even in narrow areas like densely populated urban residential areas! Seismic reinforcement brackets that can achieve seismic retrofitting in a short period with minimal construction.

"FIT Power" is a seismic reinforcement fixture such as a concrete block wall that serves as a substitute for retaining walls. It keeps the maximum protrusion of the site-side angle post to about 65mm, allowing for passage even after installation, making it a convenient design for narrow lots and densely populated residential areas. Additionally, it can be tightened by a single worker from the site side, enabling a reduction in construction time. The FIT Power Type 14 is compatible with block walls of H1, 400mm from the road surface. *We also have models available for block walls ranging from H1,200 to 1,800mm. 【Features of FIT Power】 ■ Lock bolt pile foundation method - Ground friction force is seven times the weight - Shortened construction period and cost reduction ■ Round head bolts prevent free spinning ■ Design that maintains convenience even in narrow spaces - Residents can pass through even after installation - Component weight manageable by one person ■ Demonstration experiments conducted under the guidance of the Faculty of Engineering, Gifu University ■ Patent obtained as a "reinforcement structure and reinforcement member for walls" ■ Certified as a recommended disaster prevention product by the Japan Disaster Prevention Safety Association *For more details, please refer to the PDF materials or feel free to contact us.

  • Earthquake-proof and vibration-damping equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Seismic reinforcement hardware "FIT Power" Type 16 for concrete block walls, etc.

Seismic reinforcement hardware "FIT Power" Type 16 for concrete block walls, etc.

Can be installed even in narrow areas like densely populated urban residential areas! Seismic reinforcement brackets that can achieve seismic retrofitting in a short period with minimal construction.

"FIT Power" is a seismic reinforcement fixture such as a concrete block wall that serves as an alternative to retaining walls. It limits the maximum protrusion of the site-side angle post to about 65mm, allowing for passage even after installation, making it a convenient design for narrow lots and densely populated residential areas. Additionally, since tightening work can be done by one worker from the site side, it enables a reduction in construction time. The FIT Power Type 16 is compatible with block walls of H1, 600mm from the road surface. *We also have models available for block walls ranging from H1,200 to 1,800mm. 【Features of FIT Power】 ■ Lock bolt pile foundation method - Ground friction force is seven times the weight - Shortened construction period and cost reduction ■ Round head bolts prevent free spinning ■ Design that maintains convenience even in narrow spaces - Residents can pass through even after installation - Component weight manageable by one person ■ Demonstration experiments conducted under the guidance of the Faculty of Engineering, Gifu University ■ Patent obtained as "Reinforcement structure and reinforcement members for walls" ■ Certified as a recommended product by the Japan Disaster Prevention Safety Association *For more details, please refer to the PDF materials or feel free to contact us.

  • Earthquake-proof and vibration-damping equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Seismic reinforcement hardware "FIT Power" Type 18 for concrete block walls, etc.

Seismic reinforcement hardware "FIT Power" Type 18 for concrete block walls, etc.

Can be installed even in narrow areas like densely populated urban residential areas! Seismic reinforcement brackets that can achieve earthquake resistance in a short period with minimal construction.

"FIT Power" is a seismic reinforcement fixture such as a concrete block wall that replaces retaining walls. It keeps the maximum protrusion of the site-side angle post to about 65mm, allowing for passage even after installation, making it a convenient design for narrow lots and densely populated residential areas. Additionally, it can be tightened by one worker from the site side, enabling a reduction in construction time. The FIT Power Type 18 is compatible with block walls of H1, 800mm from the road surface. *We have models available for block walls ranging from H1,200 to 1,800mm. 【Features of FIT Power】 ■ Lock bolt pile foundation method - Ground friction force is seven times the weight - Shortened construction time and cost reduction ■ Round head bolts prevent free spinning ■ Design that maintains convenience even in narrow spaces - Residents can pass through even after installation - Component weight manageable by one person ■ Demonstration experiments conducted under the guidance of the Faculty of Engineering, Gifu University ■ Patented as "Reinforcement structure and reinforcement members for walls" ■ Certified as a recommended disaster prevention product by the Japan Disaster Prevention Safety Association *For more details, please refer to the PDF document or feel free to contact us.

  • Earthquake-proof and vibration-damping equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Roofing hardware

Roofing hardware

Details will be introduced using diagrams! Our company's building hardware is also available for custom processing.

We handle "ridge fittings" for roofing materials. The details of this product are introduced using diagrams. In addition, we also offer a "stainless steel ridge frame" that can be extended with joint pieces up to a length of 6 shaku, as well as high-quality stainless steel products that do not corrode, such as "tile fixing devices." 【Features】 ■ Types range from H-40 to 120mm ■ Custom processing is also available *For more details, please refer to the PDF materials or feel free to contact us.

  • Solar mounting brackets and fittings (solar fittings and protective sheets)

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Japanese-style roof snow guard fittings "Wagata Fuugetsu" for tile roofs.

Japanese-style roof snow guard fittings "Wagata Fuugetsu" for tile roofs.

The beauty of curves that blends with harmony. Snow stop fittings with excellent design that match traditional Japanese tiles.

"Wagata Fuugetsu" is a snow stop fixture with excellent design that matches the beautiful curves and rich colors of traditional Japanese tiles. It harmonizes naturally with the tiles, resulting in a beautifully finished overall appearance of the roof. We offer a lineup suitable for both retrofit (existing buildings) and pre-installation (new buildings) types. You can choose from various colors to match the appearance of your roof. 【Product Specifications】 ■Material: SUS304 ■Thickness: Blade = 1.5mm, Foot = 2.0mm *For more details, please refer to the PDF document or feel free to contact us.

  • Metal roof
  • Others/Roofing materials (shingles, cement, steel sheets, aluminum)
  • Roof and gutter construction

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Directly Attached Ceiling Substructure Fitting "J-M Fitting"

Directly Attached Ceiling Substructure Fitting "J-M Fitting"

Introducing flexible and low-cost ceiling system parts that meet your needs!

"J-M Bracket" is a direct-attachment ceiling substrate bracket that can use conventional lightweight substrate materials, allowing for cost-effective construction of seismic and wind pressure-resistant substrates. It is possible to carry out construction while checking the marking position through the slit of the base bracket. Level adjustment work can be done by temporarily placing the substrate on lip channel steel, just like with conventional lightweight substrates. Additionally, the method of attaching the bracket to the furring channel combines both hook and screw fastening, ensuring safe use. 【Features】 ■ Flexible & Low Cost ■ Design of non-suspended seismic and wind pressure-resistant ceilings is possible ■ Easy level adjustment (±10mm from the reference point) ■ Level adjustment work can be done after temporarily placing the substrate on lip channel steel ■ Construction can be performed while checking the marking position through the slit of the base bracket ■ The method of attaching the bracket to the furring channel combines both hook and screw fastening for safety *For more details, please refer to the PDF document or feel free to contact us.

  • Other fittings
  • Disaster prevention fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Surface enclosure wall mount bracket - Space

Surface enclosure wall mount bracket - Space

Compatible with various Surface Pro and Surface Go models! Designed to allow full functionality even when locked.

The "Surface Enclosure Wall Mount Bracket - Space" is an enclosure compatible with Surface Pro 3, Pro 4, Pro 2017, Pro 6, Pro 7, Pro 8, Surface Go, Go 2, and Go 3. It can be used for various displays utilizing Surface in shops, POS, reception areas, education, healthcare, and more. To ensure ventilation, some parts of the corners and the back are open. It allows for continuous charging by routing cables through the back, enabling the use of all Surface functions even when locked in the enclosure with a key. 【Features】 ■ Aluminum alloy enclosure designed to prevent unauthorized removal ■ Storage for charging cables ■ Easy lock and release with a key ■ 100×100mm VESA standard ■ Compatible with our security wire *For more details, please refer to the PDF document or feel free to contact us.

  • Other fixtures and fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to Metal fittings

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.