Metal fittings(20mm) - List of Manufacturers, Suppliers, Companies and Products | IPROS

Last Updated： Aggregation Period:Mar 04, 2026～Mar 31, 2026
This ranking is based on the number of page views on our site.

Metal fittings Product List

31～60 item / All 115 items

Displayed results
Formwork Release "Horizontal Batten Floating Support Bracket (Compatible with φ50/60 Square)"

Formwork Release "Horizontal Batten Floating Support Bracket (Compatible with φ50/60 Square)"

A strong ally for formwork alignment! With the adjustable supporter, you can push and pull steel pipes.

This product is a φ50/60 square-compatible lateral brace stop fitting that can easily and quickly integrate formwork and steel pipes. Insert it from the top of the single pipe into the U-pin of the formwork, and once you hit the wedge, it is securely fixed. It will not lift even when pressed by a supporter. 【Features】 ■ Compatible with φ50/60 square ■ Integrates formwork and steel pipes ■ Can press the joints of steel pipes with a supporter ■ Will not lift even when pressed by a supporter ■ Allows pushing and pulling of steel pipes with a flexible supporter *For more details, please refer to the PDF document or feel free to contact us.

  • Support hardware/opening hardware
  • Work tools
  • Metal fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Special solar mounting frame for layered folded plate roofs "KS Hold Light"

Special solar mounting frame for layered folded plate roofs "KS Hold Light"

Compatible with overlapping folded plate roofs of types 88, 150, and S60! Fewer components and easy installation.

KS Hold Light can be installed on standing seam metal roofs with solar power generation systems. Made of aluminum, it is a lightweight and corrosion-resistant bracket. (JIS C 8955:2017 compliant) 【Features】 ■ Compatible with standing seam types such as Type 88, Type 150, and Type S60. ■ The brackets for securing the modules can be used interchangeably for both end and mid sections. ■ Lightweight and highly corrosion-resistant due to aluminum construction. ■ Secured with a single roof bolt. ■ Compatible with various module thicknesses (H30, 32, 35, 40). ■ Allows for fine adjustments of ±20mm by sliding the upper part of the bracket. *For more details, please refer to the PDF document or feel free to contact us at the information below. Solar & Eco Business Division Contact Information https://daidohant.com/contact/ 06-6190-9936 Tags: Solar, Solar Panels, Solar Power Generation Systems, Solar Power, Decarbonization, Carbon Neutral, SDGs, Roofing Work, Renovation, EPC, PPA, Energy Saving, Renewable Energy, Storage Batteries

  • Solar mounting brackets and fittings (solar fittings and protective sheets)
  • Solar power generation equipment
  • Photovoltaic power generation system (solar system, energy-saving housing, electricity sales business)
  • Metal fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Seismic measures for housing: Retrofit anchor bolts 'Foundation Metal'

Seismic measures for housing: Retrofit anchor bolts 'Foundation Metal'

Existing construction hardware: Measures against shaking from earthquakes, typhoons, etc.! Reinforcement of joints in existing buildings is possible.

The "Build Arm Series" is a reinforcement hardware for wooden house joints designed to strengthen existing buildings. This series can be used for existing structures. It can be utilized for disaster and earthquake countermeasures such as typhoons, strong winds, and earthquakes, as well as for opportunities to rebuild and reinforce traditional houses. 【Features】 - It is an aftermarket type of hardware that replaces conventional anchor bolts, securing the foundation and the base. - It prevents the uplift of the base and displacement from the foundation due to external forces such as earthquakes. - It has a height adjustment feature that can accommodate differences of 0 to 20 mm. - The surface treatment of the hardware uses zinc plating, eliminating concerns about rust due to moisture. We also offer L-shaped metal, foundation metal, anchor metal, base metal, and hold-down hardware. *For more details, please refer to the PDF document or feel free to contact us.

  • Reinforcement and repair materials
  • Foundation construction
  • Residential foundations
  • Metal fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Stop fitting "Width stop separator"

Stop fitting "Width stop separator"

The definitive version of the stop fastener.

Compatible with all types of formwork, including steel foundation formwork and plywood formwork. After construction, the ear section can be easily folded. 【Features】 ○ Strength is improved compared to conventional products, allowing for safe use ○ Compatible with all steel foundation formwork and plywood formwork For more details, please contact us or download the catalog.

  • Frame construction accessories
  • Metal fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
VESA 75mm/100mm compatible adjustable wall mount bracket [ADM02]

VESA 75mm/100mm compatible adjustable wall mount bracket [ADM02]

Convenient for wall mounting small monitors! VESA standard compatible adjustable angle wall mount bracket.

This is an angle-adjustable wall mount compatible with VESA 75x75mm and 100x100mm. It features a built-in level at the bottom of the unit for convenient horizontal alignment. For more details, please contact us.

  • others
  • Metal fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Velcro mounting hardware with screws

Velcro mounting hardware with screws

This is a product that includes hook-and-loop fasteners (binding Velcro), mounting hardware, and screws as a set.

The hook and loop fastener (binding Velcro) can be freely adjusted in length. It can be fixed with the included tapping screws, allowing it to be installed on wood, walls, and more.

  • others
  • Safety and consumables
  • Metal fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Slim Wall-Mount Bracket "MKB-M200A"

Slim Wall-Mount Bracket "MKB-M200A"

Angle-fixed products! Screw fixation is now possible from both the top and bottom directions.

We would like to introduce our slim wall mount bracket 'MKB-M200A'. It is effective in various settings such as hotels, hospitals, and commercial or public facilities. Elevate your space with wall mounting. The material is steel, and the color is black, with a baked finish. Please feel free to contact us for inquiries. 【Specifications (excerpt)】 ■VESA: 100×100mm, 100×200mm, 200×100mm, 200×200mm ■Weight capacity: MAX 30kg ■Wall distance: 40mm ■Compatible sizes: 32 to 43 inches ■Body weight: 1.7kg *For more details, please download the PDF or feel free to contact us.

  • MKB-M200A2.png
  • Miscellaneous metal items
  • Metal fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Reinforcement Joint Fitting "I-Plate Black/Off-White"

Reinforcement Joint Fitting "I-Plate Black/Off-White"

An accent for connecting boards and boxes! Joint fittings that enhance the space.

The "I-Plate Black and Off-White" from Oari is used to connect two boards in parallel. It also serves as an accent for joining boards or boxes. If you base it on white, it creates a natural taste atmosphere, while incorporating black easily brings out a rugged or junky feel. 【Features】 ■ Used to connect boards in parallel ■ An accent for joining boards or boxes ■ Based on white, it gives a natural taste ■ Incorporating black creates a rugged and masculine style *For more details, please feel free to contact us.

  • Support hardware/opening hardware
  • Metal fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Suspender (Hanging Fitting) | ARTIST

Suspender (Hanging Fitting) | ARTIST

Suspension hardware with a wire length of 1200mm, wire diameter of φ1.0mm, and a load capacity of 8kg!

ARTIST is a brand of decorative hardware and storage hardware for interiors. We offer products that are used not only in residential homes but also in stores and exhibition facilities. The "Spencer (hanging hardware)" is an adjustable hanging hardware that allows for free vertical positioning. It is available in silver and bronze colors. The wire is made of stainless steel SUS304, and the locking hook is made of brass. The wire length is 1200mm, the wire diameter is φ1.0mm, and the load capacity is 8kg. 【Material】 ■ Wire: Stainless steel SUS304 ■ Locking hook: Brass ■ Wire length: 1200mm ■ Wire diameter: φ1.0mm ■ Load capacity: 8kg *For more details, please download the PDF or feel free to contact us.

  • 6a.png
  • 6b.png
  • 6c.png
  • Display (display shelves, display boards, mannequins, etc.)
  • Store display shelves
  • Shelves and racks
  • Metal fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Small diameter column mounting brackets for machinery

Small diameter column mounting brackets for machinery

Can be installed safely and easily without removing the nut! Compatible with pitches of 120mm and 170mm.

This product is a mounting bracket for small-diameter poles that can be securely attached with an M12 bolt. It is applicable for 40A to 90A (φ48.6 to φ101.6) and can be installed safely and easily without removing the nut. The pitch for the mounting holes (M8) accommodates 120mm and 170mm. It is a common bracket for both the upper and lower parts. 【Features】 ■ Can be securely attached with an M12 bolt ■ Can be installed safely and easily without removing the nut ■ The pitch for the mounting holes (M8) accommodates 120mm and 170mm ■ Can be installed for 40A to 90A (φ48.6 to φ101.6) ■ Common bracket for both the upper and lower parts *For more details, please refer to the PDF document or feel free to contact us.

  • Support hardware/opening hardware
  • Metal fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Wall mount bracket for LCD monitors 'HF-402WM'

Wall mount bracket for LCD monitors 'HF-402WM'

Easy-to-install wall mount bracket for LCD monitors.

A simple installation wall mount that attaches the plate to the wall and secures the dedicated color to the back of the monitor with four screws.

  • others
  • Metal fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
JIS-EIA conversion fittings

JIS-EIA conversion fittings

This is an adjustment bracket (U-shaped metal fitting) for mounting EIA standard equipment onto JIS standard mounting rails (mounting angles).

This is a bracket that converts IS standard mounting rails to EIA standard. It is an adjustment bracket (U-shaped bracket) for mounting EIA standard equipment onto JIS standard mounting rails (mounting angles). You can specify the U number, offset length, etc., and it can be custom-made starting from one set.

  • Safes, Cabinets, Lockers
  • Metal fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
40 to 70 inch compatible ceiling-mounted TV hanger 'MKB-CE946'

40 to 70 inch compatible ceiling-mounted TV hanger 'MKB-CE946'

Active in various scenes such as hotels, hospitals, and commercial/public facilities! The color is black.

We would like to introduce our ceiling-mounted TV hanger 'MKB-CE946', which is compatible with 40 to 70-inch screens. This ceiling mount is ideal for situations where you want many people to view the screen. The material is steel, and the finish is powder-coated. Please feel free to contact us when you need assistance. 【Specifications (excerpt)】 ■ VESA: 200×200mm, 300×300mm, 400×200mm, 400×400mm, 600×400mm ■ Load capacity: MAX 50kg ■ Angle adjustment range: Down 25°, 180° rotation around the support column, tilt ±3° ■ Compatible sizes: 40 to 70 inches *For more details, please download the PDF or feel free to contact us.

  • 40～70インチ対応天吊りTVハンガー『MKB-CE946』2.png
  • Miscellaneous metal items
  • Metal fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Ceiling suspension hardware

Ceiling suspension hardware

Active in various scenes such as hotels, hospitals, and commercial and public facilities!

We offer a suitable "ceiling mount" for when you want many people to see the screen. We have a wide range of products, including the "MKB-CE946" for 40 to 70 inches, the "MKB-32T" for up to 32 inches, and the "OCR-75T" for 13 to 24 inches. We cater to diverse needs with options such as types where you can choose the pipe length from the ceiling to the TV position, and TV storage types. 【MKB-CE946 Specifications】 ■VESA: 200×200mm, 300×300mm, 400×200mm, 400×400mm, 600×400mm ■Load Capacity: MAX 50kg ■Angle Adjustment Range: Down 25°, 180° rotation around the support pole, tilt ±3° ■Compatible Sizes: 40 to 70 inches ■Material: Steel ■Finish: Powder coating *For more details, please download the PDF or feel free to contact us.

  • Other office supplies
  • Metal fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Reinforcement hardware for wooden houses [Strong wind and earthquake measures]

Reinforcement hardware for wooden houses [Strong wind and earthquake measures]

It is a fitting for existing buildings. It is also suitable for areas without firebracing foundations or anchor bolts. It can be used for reinforcement with nails or mortise and tenon joints.

The "Build Arm Series" that we handle can be installed on existing buildings and is a reinforcement hardware for wooden houses that allows for wind and earthquake countermeasures at a low cost. Some products in our lineup feature a surface treatment with zinc plating that is resistant to moisture and rust. Currently, we are distributing materials that include data on compression and tensile tests for each product. You can view them immediately via "PDF Download." 【Features of Listed Products】 ■ L-shaped Metal AZ/CZ/II EZ - Contributes to preventing the columns from falling out due to twisting phenomena in the floor. ■ Foundation Metal BZ - Prevents the foundation from lifting or shifting due to earthquakes, etc. ■ Tsuba Metal TP/Foundation Metal DP - Prevents damage to joints caused by vertical and horizontal shaking due to strong winds and earthquakes. ■ Ease Guard NS-21 - Integrates the foundation, base, and columns from the exterior of the building to prevent joint disengagement.

  • Reinforcement and repair materials
  • Foundation construction
  • Residential foundations
  • Metal fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Wall mount bracket for LCD monitors 'HF-30C'

Wall mount bracket for LCD monitors 'HF-30C'

This is a wall mount bracket for LCD monitors that can accommodate a maximum pitch of 420×310mm.

■Supports a maximum pitch of 420×310mm ■Monitor angle is adjustable (0° to -15°)

  • others
  • Metal fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Equipment mounting bracket

Equipment mounting bracket

By changing the band, it can be installed from φ100 to φ410! Here is an introduction to the common fittings for both the top and bottom.

This product is a mounting bracket compatible with equipment that can be installed with a diameter of φ100 to φ410. By changing the band, it can be installed with a diameter of φ100 to φ410, and the pitch of the mounting holes (M8) accommodates 120mm and 170mm. It is a common mounting bracket for both the upper and lower parts. 【Features】 ■ Can be installed with a diameter of φ100 to φ410 by changing the band ■ The pitch of the mounting holes (M8) accommodates 120mm and 170mm ■ Common bracket for both upper and lower parts *For more details, please refer to the PDF document or feel free to contact us.

  • Support hardware/opening hardware
  • Metal fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
One-Dan Can Organizer "Ittokun"

One-Dan Can Organizer "Ittokun"

For organizing paint and solvent one-gallon cans!

The platform rotates smoothly with 12 ball bearings. By rotating, you can quickly find the materials you need.

  • Company：アイユ
  • Price：10,000 yen-100,000 yen
  • Waterproofing work
  • Roof and gutter construction
  • Plastering and painting work
  • Metal fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Galvalume Snow Stopper "Snow Angle"

Galvalume Snow Stopper "Snow Angle"

A simple design that also incorporates snow slide prevention features! Compatible with a wide range of roofing!

"Snow Angle" is a snow stop made of Galvalume with a simple design. We have revamped the previously bulky attachment hardware to create a sleek design. We offer mounting hardware compatible with four types of roofing materials, enhancing its aesthetic appeal. 【Features】 ■ Dedicated mounting hardware for horizontal flat, standing seam, and tile roofs ■ Available in four colors ■ Suitable for general and moderate snow regions

  • Galvanized steel sheet
  • Waterproofing work
  • Roof and gutter construction
  • Metal fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Emergency hatch sliding ladder

Emergency hatch sliding ladder

A semi-fixed type evacuation hatch sliding ladder with minimal twisting and swaying.

This product is a highly effective slide-type escape hatch ladder that works well even on narrow balconies. In case of an emergency, it ensures a size that can accommodate a circle with a diameter of 500mm or more, even if obstacles enter the descent area, making it effective for evacuation. The thickness of the escape hatch allows for a ladder to be stored at H=200mm, regardless of the floor height. The child lock (safety device) engages as soon as the top cover is closed. 【Features】 ■ Semi-fixed type with minimal twisting and swaying of the ladder ■ The thickness of the escape hatch allows for a ladder to be stored at H=200mm, regardless of the floor height ■ The child lock (safety device) engages as soon as the top cover is closed ■ Highly effective even on narrow balconies ■ The descent opening is wide at over 500mm, allowing for smooth evacuation *For more details, please refer to the PDF document or feel free to contact us.

  • Disaster prevention supplies
  • Metal fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Slim TV Wall Mount Bracket 'WF Series' Set of 5

Slim TV Wall Mount Bracket 'WF Series' Set of 5

Wall-mounted hardware WF series, a convenient set of 5 pieces for bulk purchases that saves the hassle of quantity inspection.

This is a wall mount bracket for Japanese-made flat-screen TVs and displays. It is sold as a set of five. You can choose between two types: adjustable angle and fixed. *Please inquire about compatible models, as some TVs and displays may not be mountable. *For more details, please refer to the PDF document or feel free to contact us.

  • others
  • Metal fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Signboard mounting hardware for hanging signs

Signboard mounting hardware for hanging signs

Just hang it to secure the sign.

■Just hang it on the signboard! You can hang sandbags, iron weights, etc. to secure the signboard. It's easy to carry and can be stored compactly.

  • Information display device
  • Metal fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
PVC sheet waterproof snow stop hardware | AY snow stop hardware for sloped roofs

PVC sheet waterproof snow stop hardware | AY snow stop hardware for sloped roofs

Snow prevention! Special snow stop hardware for waterproof vinyl sheet rivet roofs.

The AY snow stop hardware is a snow stop specifically designed for rivet roofs, featuring a PVC coating on the product surface. It prevents snow from falling in snowy regions. By securing it with anchor fixation to the structure, it ensures high strength and achieves excellent water tightness through fusion bonding with the rivet roof. When used in conjunction with the rivet roof ART, it results in a more natural finish.

  • スクリーンショット 2025-03-05 14.27.20.png
  • アセット 2-100.jpg
  • スクリーンショット 2025-03-05 14.26.52.png
  • Others/Roofing materials (shingles, cement, steel sheets, aluminum)
  • Roof and gutter construction
  • Disaster prevention fittings
  • Metal fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Slim Arm Wall-Mount Bracket 'MKB-SA2343'

Slim Arm Wall-Mount Bracket 'MKB-SA2343'

The material is aluminum and steel, and the coating is baked! You can freely adjust the direction of the TV.

The "MKB-SA2343" is a versatile compact arm mount. It is an arm type that allows you to freely adjust the direction of the TV. Its diverse arm movements make it suitable for corner installations. Please feel free to contact us when you need assistance. 【Specifications (excerpt)】 ■VESA: 100×100mm, 200×100mm, 200×200mm ■Load capacity: MAX 30kg ■Wall distance: 27–262mm ■Angle adjustment range: Up and down ±15°, left and right ±50° (until it hits the wall), horizontal adjustment ±5° ■Compatible sizes: 23–43 inches ■Main unit weight: 2.3kg *For more details, please download the PDF or feel free to contact us.

  • 23～43インチ対応薄型アーム式壁掛け金具『MKB-SA2343』2.png
  • Miscellaneous metal items
  • Metal fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Wall-mounted arm-type bracket 'MKB-AC2'

Wall-mounted arm-type bracket 'MKB-AC2'

A premium presence that transcends the conventional concept of wall-mounted brackets!

We would like to introduce our wall-mounted arm bracket 'MKB-AC2'. It supports 37 to 65 inches, and the materials used are steel, aluminum, and plastic (for the cover), with a baked-on finish. The adjustable angle range is 5° upwards, 10° downwards, and 60° to the left and right. The tilt adjustment is 2° to the left and right. 【Specifications (excerpt)】 ■VESA: W100–600mm, H100–400mm ■Compatible sizes: 32–70 inches ■Load capacity: MAX 45kg ■Weight of the main unit: 6.4kg ■Distance from the wall: 43–520mm *For more details, please download the PDF or feel free to contact us.

  • MKB-AC2 2.png
  • Miscellaneous metal items
  • Metal fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Wall-mounted arm-type bracket 'MKB-AC1(BS/WH)'

Wall-mounted arm-type bracket 'MKB-AC1(BS/WH)'

While supplies last! Suitable for corner installation with a variety of arm movements.

We would like to introduce our wall-mounted arm-type bracket 'MKB-AC1(BS/WH)'. This product is compatible with 37 to 65-inch TVs and features an arm type that allows for free adjustment of the TV's orientation. It is a premium product that surpasses the conventional concept of wall-mounted brackets, offering a remarkable presence. Please feel free to contact us when you need assistance. 【Specifications (excerpt)】 ■VESA: W100–400mm, H100–400mm ■Compatible Sizes: 37–65 inches ■Load Capacity: MAX 40kg ■Product Weight: 6.7kg ■Wall Distance: 50–520mm *For more details, please download the PDF or feel free to contact us.

  • MKB-AC1(BS 2.png
  • MKB-AC1(BS 3.png
  • Miscellaneous metal items
  • Metal fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
New Model: Single Pipe Pile [Scat 91]

New Model: Single Pipe Pile [Scat 91]

A single pipe pile that can be freely extended in length according to the ground and site conditions! Suitable for both manual driving with a hammer and machine driving!

A convenient single pipe pile that can be easily extended to various lengths according to the ground and site conditions! The "Skat 91" comes in three lengths: 1.0m, 1.5m, and 2.0m. By connecting these three types with various lengths of single pipe using our "Tsunagood," you can create single pipe piles of various lengths on-site, accommodating different ground conditions and site environments. Additionally, whether using machine driving or hammer driving, you can drive the single pipe without deforming it by using our "Tataka (large, medium, small)." In any scaffolding environment, you can always keep both feet on the ground and safely drive long single pipe piles by yourself, enhancing safety and work efficiency while achieving cost reduction. 【Product Features】 ■ Eliminates the striking part, achieving lower costs for single pipe piles. ■ Using "Tsunagood," you can reliably reach the support layer. ■ By attaching rope fittings to the single pipe piles, various uses are possible. ■ Extend! Connect! Pull! Stand up! The convenience of single pipe piles is greatly enhanced. *For more details, please download the PDF or feel free to contact us.

  • Temporary Construction Materials
  • Civil Engineering Company
  • Construction company
  • Metal fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Multi-use double soft close "AFD SYSTEM"

Multi-use double soft close "AFD SYSTEM"

Compatible with door pockets! The bottom of the door edge allows for the unit to be attached and detached while the door is hung.

The "AFD SYSTEM" is a product that assists in closing sliding doors at the moment they are about to close. By using a "soft close upper hanging wheel" at the top of the door and a "multi-soft close unit" at the bottom, the soft close mechanism activates approximately 120mm before the frame when opening and approximately 50mm before the frame when closing. Additionally, the bottom unit allows for easy attachment and detachment while the door is hung, providing excellent maintenance accessibility. 【Features】 ■ Compatible with door pockets ■ Assists in closing the door at the moment it is about to close ■ Excellent maintenance accessibility *For more details, please refer to the PDF document or feel free to contact us.

  • Door Accessories
  • Metal fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Super Magnet Device "SMD-1200"

Super Magnet Device "SMD-1200"

Maximum strength 1,600kg, magnetic inspection possible on-site! No welding of wall connection pieces to the structure required.

The "SMD-1200" is a magnetic anchor specifically designed for temporary structures using neodymium magnets (permanent magnets). It can be installed in places where regular wall connections cannot be made (such as steel wall surfaces). The magnetic force can be measured on-site during installation and is converted into numerical values for peace of mind. Additionally, due to its simple installation method, it can generate very strong magnetic force, allowing for on-site quantification of the magnetic force and inspection of how much load it is adhering to. 【Features】 - Reduced installation time and shortened construction period - No welding required, such as for heat processing - Easy to adhere and repurpose, improving workability - Increased safety due to the ability to measure magnetic force *For more details, please refer to the PDF document or feel free to contact us.

  • Temporary Construction Materials
  • Metal fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to Metal fittings

COPYRIGHT © 2001-2026 IPROS CORPORATION ALL RIGHTS RESERVED.