Metal fittings(20mm) - メーカー・企業と製品の一覧 | イプロス

更新日： 集計期間:May 06, 2026～Jun 02, 2026
※当サイトの各ページの閲覧回数を元に算出したランキングです。

Metal fittingsの製品一覧

61～90 件を表示 ／ 全 115 件

表示件数
Multi-use double soft close "AFD SYSTEM"

Multi-use double soft close "AFD SYSTEM"

Compatible with door pockets! The bottom of the door edge allows for the unit to be attached and detached while the door is hung.

The "AFD SYSTEM" is a product that assists in closing sliding doors at the moment they are about to close. By using a "soft close upper hanging wheel" at the top of the door and a "multi-soft close unit" at the bottom, the soft close mechanism activates approximately 120mm before the frame when opening and approximately 50mm before the frame when closing. Additionally, the bottom unit allows for easy attachment and detachment while the door is hung, providing excellent maintenance accessibility. 【Features】 ■ Compatible with door pockets ■ Assists in closing the door at the moment it is about to close ■ Excellent maintenance accessibility *For more details, please refer to the PDF document or feel free to contact us.

  • Door Accessories
  • Metal fittings

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
New Model: Single Pipe Pile [Scat 91]

New Model: Single Pipe Pile [Scat 91]

A single pipe pile that can be freely extended in length according to the ground and site conditions! Suitable for both manual driving with a hammer and machine driving!

A convenient single pipe pile that can be easily extended to various lengths according to the ground and site conditions! The "Skat 91" comes in three lengths: 1.0m, 1.5m, and 2.0m. By connecting these three types with various lengths of single pipe using our "Tsunagood," you can create single pipe piles of various lengths on-site, accommodating different ground conditions and site environments. Additionally, whether using machine driving or hammer driving, you can drive the single pipe without deforming it by using our "Tataka (large, medium, small)." In any scaffolding environment, you can always keep both feet on the ground and safely drive long single pipe piles by yourself, enhancing safety and work efficiency while achieving cost reduction. 【Product Features】 ■ Eliminates the striking part, achieving lower costs for single pipe piles. ■ Using "Tsunagood," you can reliably reach the support layer. ■ By attaching rope fittings to the single pipe piles, various uses are possible. ■ Extend! Connect! Pull! Stand up! The convenience of single pipe piles is greatly enhanced. *For more details, please download the PDF or feel free to contact us.

  • Temporary Construction Materials
  • Civil Engineering Company
  • Construction company
  • Metal fittings

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Super Magnet Device "SMD-1200"

Super Magnet Device "SMD-1200"

Maximum strength 1,600kg, magnetic inspection possible on-site! No welding of wall connection pieces to the structure required.

The "SMD-1200" is a magnetic anchor specifically designed for temporary structures using neodymium magnets (permanent magnets). It can be installed in places where regular wall connections cannot be made (such as steel wall surfaces). The magnetic force can be measured on-site during installation and is converted into numerical values for peace of mind. Additionally, due to its simple installation method, it can generate very strong magnetic force, allowing for on-site quantification of the magnetic force and inspection of how much load it is adhering to. 【Features】 - Reduced installation time and shortened construction period - No welding required, such as for heat processing - Easy to adhere and repurpose, improving workability - Increased safety due to the ability to measure magnetic force *For more details, please refer to the PDF document or feel free to contact us.

  • Temporary Construction Materials
  • Metal fittings

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Mounting bracket for device/M350L-608AC

Mounting bracket for device/M350L-608AC

Fixed hardware for equipment mounting frame (Anchor bolt M8 type) / Part number M350L-608AC

Fixed brackets BCP measures product to protect expensive machinery and equipment Passed earthquake test of seismic intensity 6 strong (conducted under the conditions below) Load limit for the object: 200kg Height limit for the object: Up to H1200mm

  • Steel
  • Metal fittings

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Iron plate fixing bracket "Ironman3"

Iron plate fixing bracket "Ironman3"

[Sale] Achieve high strength through forged molding! Ideal for rental items as well!

The "Ironman3" fixed plate fastener, designed to prevent shifting and wobbling of steel plates, is extremely compact compared to conventional models! Due to its forged design, it boasts stable strength. It can be easily installed with just one bolt, weighs 2.4 kg per unit for easy portability, and is designed to accommodate various scenarios. ■ Features - The height of the upper part after installation is low, making it easy to drive over thanks to the C-cut design. - Uses high-strength bolts! - Compatible with steel plates of thickness 19 to 25 mm! *Please inspect regularly and tighten the bolts as necessary. *For more details, please download the PDF below.

  • 28.jpg
  • 29.jpg
  • Temporary Construction Materials
  • Safety and consumables
  • Metal fittings

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Wooden House Reinforcement Fitting "L-Type Metal AZ"

Wooden House Reinforcement Fitting "L-Type Metal AZ"

Introduction of reinforcement brackets used for the application of wooden house reinforcement systems!

Kankyo Shizai Co., Ltd. sells equipment, materials, and chemicals for creating a comfortable environment. The "L-shaped Metal AZ" is a fitting used for reinforcing wooden houses. Its dimensions are 350×350×50mm, t=6. 【Specifications】 ■ Dimensions: 350×350×50mm, t=6 ■ Packaging: 6 sets/case ■ Weight: 20.7kg/case *For more details, please refer to the PDF document or feel free to contact us.

  • Reinforcement and repair materials
  • Metal fittings

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Wooden house reinforcement hardware "Ease Guide NS-21"

Wooden house reinforcement hardware "Ease Guide NS-21"

Introduction of reinforcement brackets used for the application of wooden house reinforcement systems!

Kankyo Shizai Co., Ltd. sells equipment, materials, and chemicals for creating a comfortable environment. The "Ease Guide NS-21" is a fitting used for reinforcing wooden houses. It has three external mounting points and a height of 730mm. 【Specifications】 ■ Dimensions: 730×180×120mm, t=5 ■ Packaging: 2 sets per case ■ Weight: 13.5kg per case *For more details, please refer to the PDF document or feel free to contact us.

  • Reinforcement and repair materials
  • Metal fittings

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Compatible with combined flat roofs, snow stop hardware 'Combined Hyper Lock'

Compatible with combined flat roofs, snow stop hardware 'Combined Hyper Lock'

Overwhelming construction speed. Place it, tighten it, that's it.

"Fitting Hyper Lock" is a snow stop bracket compatible with flat roofs. It adopts a footed structure that pursues workability and stability, significantly improving work efficiency and leading to a reduction in construction time. Due to its lightweight and compact design, it is easy to transport at the construction site, allowing for smooth installation. You can choose from various colors to match the appearance of the roof. 【Features】 ■ Improved work efficiency ■ Reduced construction time ■ Lightweight and compact ■ Smooth installation *For more details, please refer to the PDF document or feel free to contact us.

  • Metal roof
  • Others/Roofing materials (shingles, cement, steel sheets, aluminum)
  • Roof and gutter construction
  • Metal fittings

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Single pipe driving fitting [hammering - large]

Single pipe driving fitting [hammering - large]

No deformation of the single pipe even with powerful strikes! With a large target of 60mm, it ensures accuracy! It employs a tapered structure that efficiently transmits striking force.

By enlarging the striking area, it is designed to make it easier to hit with a hammer. The supporting side below can work with peace of mind. You can confidently and powerfully drive the Skat 91 or single pipes with a hammer! 【Features】 ■ Outer diameter Φ48.6, thickness 2.4mm specification ■ The target is large, making it easier for the hammer to hit ■ Fewer mis-hits with the hammer, providing reassurance for the person supporting ■ The heads (striking parts) of single pipe piles [Skat 91] and single pipe do not deform ■ Single pipes can also be driven directly ■ No rebound during striking ■ Treated with hardening processing for long-term use *For more details, please download the PDF or feel free to contact us.

  • Steel structure construction
  • Foundation construction
  • Pile and foundation work
  • Metal fittings

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Biso Gondola Corner Deck KER・KBR | For Corner Construction

Biso Gondola Corner Deck KER・KBR | For Corner Construction

A three-point suspension gondola suitable for corner renovation work. There are two types: L-shaped and U-shaped.

Corner deck type gondola for super high-rise buildings. Ideal for construction at building corners. 【KER】Cable type (uses external power supply) 【KBR】Battery type (can operate without cables due to battery power)

  • Temporary Construction
  • Construction machinery leasing and rental
  • Renovation and repair methods
  • Metal fittings

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
B-Max brackets for layered folding plates

B-Max brackets for layered folding plates

A bracket for stacked folding panels that allows for the simultaneous installation of the module and the securing and grounding of the fittings!

"Be-Max" is a bracket designed for overlapping folded plates that achieves an industry-leading gap of just 5mm between upper and lower panels. It is compatible with various modules and is suitable for residential and industrial use in garages, stores, warehouses, and more. 【Compatible Modules】 ■ Flangeless Type ■ P-Type Flange Type ■ M-Type Flange Type *For more details, please download the PDF or feel free to contact us.

  • Solar mounting brackets and fittings (solar fittings and protective sheets)
  • Metal fittings

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Wall-mounted arm type bracket 'MKB-AW1'

Wall-mounted arm type bracket 'MKB-AW1'

A product with a leveler that is convenient for horizontal adjustment when installing a TV on the wall!

We would like to introduce our wall-mounted arm-type bracket 'MKB-AW1'. The included wiring cover allows for neat wiring. It is compatible with 40 to 60-inch TVs. The color is black, and the finish is powder-coated. Additionally, the material is steel, and it features an arm type that allows you to freely adjust the direction of the TV. Please feel free to contact us if you have any inquiries. 【Specifications (excerpt)】 ■VESA: W200–400mm, H100–400mm ■Compatible size: 40–60 inches ■Load capacity: MAX 45kg ■Main unit weight: 5.6kg ■Wall distance: 50–465mm *For more details, please download the PDF or feel free to contact us.

  • MKB-AW1 2.png
  • MKB-AW1 3.png
  • MKB-AW1 4.png
  • Miscellaneous metal items
  • Metal fittings

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Wall-mounted bracket "MKB-PP4370"

Wall-mounted bracket "MKB-PP4370"

With multiple setups, you can freely expand the video wall! Various fine adjustments can be made even after installation.

The "MKB-PP4370" is a wall mount for multi-display setups that allows for easy maintenance after installation by being able to pull it out from the front. The joints are unified in black to enhance the premium feel. With a single push, the monitor can be pulled out horizontally, and with another push, it can be stored (fixed) thanks to the pop-out feature. Additionally, after hooking it onto the wall mount, you can lower the lever to lock it. The lever can be raised to unlock it. 【Features】 ■ Compatible with video wall installations ■ Convenient pop-out feature with a single push ■ Easy maintenance ■ Fine adjustments possible after installation ■ Premium quality paint ■ Easy locking with a lever *For more details, please download the PDF or feel free to contact us.

  • MKB-PP4370 2.png
  • MKB-PP4370 3.png
  • MKB-PP4370 4.png
  • MKB-PP4370 5.png
  • MKB-PP4370 6.png
  • MKB-PP4370 7.png
  • MKB-PP4370 8.png
  • Miscellaneous metal items
  • Metal fittings

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
H-shaped steel beam suspension fixture "Revo Grip Indoor RG Series"

H-shaped steel beam suspension fixture "Revo Grip Indoor RG Series"

Calculate clear design strength through unique strength calculations! Create a strength calculation report based on existing H-shaped steel sizes and the CT steel sizes to be used.

We would like to introduce our indoor H-beam suspension fixed fittings, the "Revo Grip RG Series." The installation part accommodates two locations and is compatible with H-beams up to 200mm in width and 19.0mm in flange thickness. The basic set includes 9 items: CT steel, grip plate, filler plate (1mm to 10mm), high-tensile bolts, high-tensile washers, and QC nuts. Please feel free to contact us if you have any inquiries. 【Lineup】 ■RGS-100 ■RGS-125 ■RGS-150 ■RGS-175 ■RGS-200 *For more details, please download the PDF or feel free to contact us.

  • Joints between components
  • Metal fittings

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Simple flat bracket/LP-2

Simple flat bracket/LP-2

This is a connector fitting for the PS series!

This is a connecting fitting for the PS series. It allows for simple two-point fastening. It contributes to construction in situations where the need for bolt fastening is minimal. *For more details, please download the catalog.

  • Temporary Construction Materials
  • Equipment leasing and rental
  • Metal fittings

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Fixed hardware for device mounting frame (belt type) / Part number M350L-635B

Fixed hardware for device mounting frame (belt type) / Part number M350L-635B

BCP measures products that protect expensive machines and equipment. A belt type that can accommodate various tabletop surfaces regardless of the tabletop material.

BCP measures product to protect expensive machines and equipment Belt type compatible with various tabletop surfaces regardless of the surface material Load limit for the object: 200kg Height limit for the object: up to H1200mm

  • Fork belt
  • Metal fittings

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Stainless steel wall-mounted bracket

Stainless steel wall-mounted bracket

"Made of stainless steel," making it ideal for outdoor use and medical settings.

Made of stainless steel, it is ideal for outdoor use and medical settings. The simple design allows for easy installation and angle adjustment. This stainless steel wall-mounted bracket is excellent in corrosion resistance, heat resistance, and strength, and is also easy to maintain. It has a load capacity of 6 kg and can be installed either vertically or horizontally.

  • Other fittings
  • Metal fittings

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Connection fittings for securely joining single pipes [Massgood - Straight Type]

Connection fittings for securely joining single pipes [Massgood - Straight Type]

It is a single pipe joint that connects single pipes more securely as if they were one solid piece.

The "Massgood Straight Type" connects single pipes firmly and straight with fewer components. Even when bolts are tightened, the single pipes do not deform, and there is no loosening, play, or sagging at the connection points. ~Features of the Connection Fitting [Massgood Straight Type]~ ■ There are two types available: for single pipes with an outer diameter of 48.6mm and a thickness of 2.4mm, and for those with an outer diameter of 48.6mm and a thickness of 1.8mm. ■ There is no loosening, play, or sagging at the connection points. ■ Connects more quickly and firmly straight with fewer components, allowing one person to do it. ■ High-tension bolts are used. ■ The single pipes do not deform even when bolts are tightened. *For more details, please download the PDF or feel free to contact us.

  • Temporary Construction Materials
  • Civil Engineering Company
  • Construction company
  • Metal fittings

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Snow stop hardware for solar panels "Snow Truss"

Snow stop hardware for solar panels "Snow Truss"

Snow prevention brackets for solar panels that prevent snow from falling off vigorously! By gradually shedding snow, it suppresses the occurrence of snow slides, snow drifts, and icicles!

The snow retention device "Snow Truss," developed specifically for solar panels, prevents sliding snow from the glass surface of solar panels, which are prone to snow sliding. The snow that is caught is finely shredded by a net, gradually allowing it to fall, thereby suppressing the occurrence of snow sliding, snow drifts, and icicles. While the image may be that "snow retention = snow country," this product is particularly recommended for areas where snow falls only once every few years. ● Snow Sliding Prevention Prevents sliding snow from solar panels, suppressing the occurrence of snow sliding, snow drifts, and icicles. ● Snow Damage Prevention Prevents troubles caused by falling snow (such as damage to nearby carports or vehicles). ● Height Increase Main body height is 205mm. Effectively catches sliding snow from solar panels. ● Compact Design Can be installed in small spaces at the eaves (minimum installation area of 150mm). ● Compatible Roofs Horizontal roofing / Fitting-type standing seam / Tile rods (without core wood) / Decorative slate / Flat tiles *For more details, please request materials or view the PDF data from the download.

  • Flag hardware and decorative hardware
  • Metal fittings

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Safety fastening hardware for formwork steel plates "Double Plate"

Safety fastening hardware for formwork steel plates "Double Plate"

Safety, security, no welding NETIS registered: KT-200095-A

The double plate is a patented item that features a "safety pin" attached to the plate, which is secured with bolts and driven into the steel plate with a hammer, allowing it to bite into the plate and control the "opening, shifting, and rattling" of the steel plate. By securely fixing the steel plate with the double plate, it prevents serious accidents caused by the rattling of the steel plate due to cutting the welded parts of conventional plates. The double plate is safe and easy to install, requires no welding, and therefore does not emit CO2 during welding, making it environmentally friendly. It is a construction site safety fastening device for steel plates that does not incur repair costs upon return of the steel plates. *Rental options are also available.

  • others
  • Metal fittings

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Wall-mounted bracket with STB storage unit, compatible with vertical installation.

Wall-mounted bracket with STB storage unit, compatible with vertical installation.

Wall-mounted bracket + storage unit! You can store the STB in the wall-mounted bracket.

The "Wall-Mounted Plus Vertical Installation Compatible Type" is a wall mount with a storage unit for STBs. You won't have to worry about where to place communication devices and peripherals like STBs, and its slim design allows you to install the display close to the wall, maintaining a sense of unity with the wall. Additionally, installation of communication devices and peripherals is not required. Simply place the STB in the storage unit to complete the setup. [Features] ■ Secure placement for STBs ■ Simplified installation *For more details, please download the PDF or feel free to contact us.

  • Other fixtures and fittings
  • Metal fittings

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Wall-mounted arm bracket

Wall-mounted arm bracket

An arm type that allows you to freely adjust the direction of the TV!

We would like to introduce the "Wall-Mounted Arm Bracket" that we handle. We offer a wide range of products, including popular, high-design brackets and those designed for cable management, suitable for corner installations with versatile arm movements. We have a selection that includes the "MKB-AW1" for 40 to 60 inches, the "MKB-AC1(BS/WH)" and "MKB-AC2" for 37 to 65 inches, and the "MKB-AM27" for 15 to 32 inches. 【MKB-AW1 Specifications (Partial)】 ■ Mountable Dimensions - W: 200–400mm - H: 100–400mm ■ Load Capacity: MAX 45kg ■ Wall Distance: 50–465mm ■ Compatible Sizes: 40–60 inches *For more details, please download the PDF or feel free to contact us.

  • Other office supplies
  • Metal fittings

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Multi Soft Close Unit

Multi Soft Close Unit

You can remove the unit without taking off the door, which improves work efficiency!

The "Multi Soft Close Unit" can be inserted into sliding doors, allowing it to accommodate various configurations without being restricted by the upper hardware. The soft close mechanism activates approximately 120mm before the door's stopping position, and it has a longer stroke than typical soft close systems, enabling the option to switch between having a gap or not. There are various configuration options available, such as "Multi Soft Close Double Open Configuration" and "Multi Soft Close Pocket Configuration." 【Three Key Points】 ■ Compatible with various configurations using HR systems, AFD systems, etc. ■ Unit replacement can be done without removing the door ■ Soft close activation distance of approximately 120mm *For more details, please download the PDF or feel free to contact us.

  • Other fittings
  • Metal fittings

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Camera wall mount bracket 'KT-CAM1'

Camera wall mount bracket 'KT-CAM1'

Camera wall mount bracket that allows storage of AC adapter and excess cable length inside the box.

The "KT-CAM1" is a wall mount bracket for the Panasonic AW-HE60 and Sony BRC-H900/Z700 cameras. It can be installed with either camera. Additionally, the AC adapter and excess cables can be stored inside the box. 【Specifications】 ■External dimensions: W206.6mm × H150mm × D324mm ■Material: 1.6t steel, Munsell 5Y 7/1, semi-gloss baked paint finish *For more details, please download the PDF or contact us.

  • Security cameras and surveillance systems
  • Metal fittings

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Seismic reinforcement fittings for concrete block walls, "FIT Power" Type 12

Seismic reinforcement fittings for concrete block walls, "FIT Power" Type 12

Can be installed even in narrow areas like densely populated urban residential areas! Seismic reinforcement brackets that can achieve seismic retrofitting in a short period with minimal construction.

"FIT Power" is a seismic reinforcement fixture such as a concrete block wall that replaces retaining walls. The maximum protrusion of the angle support on the site side is kept to about 65mm, allowing for passage even after installation, making it a convenient design for narrow lots and densely populated residential areas. Additionally, since tightening work can be done by one worker from the site side, it enables a reduction in construction time. The FIT Power Type 12 is compatible with block walls of H1,200mm from the road surface. *We have models available for block walls ranging from H1,200 to H1,800mm. 【Features of FIT Power】 ■ Lock bolt pile foundation method - Ground friction force is seven times the weight - Shortened construction period and cost reduction ■ Round head bolts prevent free spinning ■ Design that maintains convenience even in narrow spaces - Residents can pass through even after installation - Component weight manageable by one person ■ Demonstration experiments conducted under the guidance of the Faculty of Engineering, Gifu University ■ Patent obtained as "Reinforcement structure and reinforcement members for walls" ■ Certified as a recommended disaster prevention product by the Japan Disaster Prevention Safety Association *For more details, please refer to the PDF document or feel free to contact us.

  • Earthquake-proof and vibration-damping equipment
  • Metal fittings

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
L-Shaped Cup for Polishing - Rough Grinding (for Stone Surface Preparation)

L-Shaped Cup for Polishing - Rough Grinding (for Stone Surface Preparation)

A metal cup featuring an L-shaped long segment that is robustly ground and quickly finished smoothly. It is ideal for those seeking surface accuracy.

1. Dedicated grain size lineup for sharpening 2. L-shaped long segments create high surface accuracy 3. Available in all grain sizes for diameters of 100mm and 125mm ★ For all inquiries regarding our products, please contact us through our website. Inquiries through this site cannot be used. Website: https://www.ebisu-tool.org

  • Concrete construction
  • Renovation and repair methods
  • Artificial stone coating/Terrazzo on-site coating
  • Metal fittings

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Wall-mounted bracket with STB storage unit - Wall Mount Plus Standard

Wall-mounted bracket with STB storage unit - Wall Mount Plus Standard

Wall-mounted bracket + storage unit! You can store the STB in the wall-mounted bracket.

The "Wall-Mounted Plus Standard" is a wall mount with a storage unit for STBs. You won't have to worry about where to place communication devices like STBs and mini PCs, and its slim design allows you to install the display close to the wall, maintaining a sense of unity with the wall. The STB can also be securely fixed with screws using the VESA holes, making it excellent for security measures. 【Features】 ■ Secure placement for STBs ■ Simplified installation *For more details, please download the PDF or feel free to contact us. *If you would like a brochure, please reach out to us.

  • Other fixtures and fittings
  • Metal fittings

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Residential Foundation Related Comprehensive Catalog Vol. 12 (November 2021)

Residential Foundation Related Comprehensive Catalog Vol. 12 (November 2021)

A wide range of products is available, including NSP formwork, width stop fittings, and anchor fasteners!

This catalog is a comprehensive catalog related to housing foundations from NSP Corporation. It features a rich lineup including NSP's recommended products, width-stopping brackets (separators), stacked blocks, base frames, spacers, protrusions, and anchor fixes. The PDF catalog is user-friendly as you can click to navigate to your desired page. Please feel free to download and take a look. 【Contents (excerpt)】 ■NSP formwork (for 45mm) ■KR formwork (for 50mm) ■Width-stopping brackets (separators) ■Stacked blocks ■Integral casting *For more details, please refer to the PDF materials or feel free to contact us.

  • Residential foundations
  • Formwork material
  • Steel bar construction
  • Metal fittings

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Opening and closing hardware "ECONO Catch"

Opening and closing hardware "ECONO Catch"

Compatible with thick furniture doors with a stroke of 27.5mm!

The "ECONO Catch" is a closing hardware that allows for a flat door without the need for knobs or handles. It features an adjustment mechanism that allows for front and back adjustments even after installation. Additionally, the push release amount is 1.5 to 2.0mm, minimizing the gap of the door. 【Lineup】 ■YJ-EKB (Black) ■YJ-EKW (White) *For more details, please download the PDF or feel free to contact us.

  • Support hardware/opening hardware
  • Metal fittings

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Snow Stopper Fitting for Low Snowfall Areas, Side Roof Installation 'Assist Retrofit 150'

Snow Stopper Fitting for Low Snowfall Areas, Side Roof Installation 'Assist Retrofit 150'

By designing the shape of the fastening part (lower part), it fits various types of horizontal roofing.

The "Assist After-Attach 150" is a snow stop bracket designed for horizontal roofing in areas with light snowfall, featuring a compact and lightweight design (approximately 200g) that achieves low cost. The blades are designed to be simple and low in height to avoid compromising the aesthetics of the roof. Additionally, the blade design allows for variations in color intensity depending on the amount of sunlight. By innovating the shape of the fastening part (bottom), it fits various types of horizontal roofing. 【Features】 ■ Compact and lightweight design (approximately 200g) ■ Achieves low cost ■ Simple and low-height blades that do not compromise the aesthetics of the roof ■ Blade design that allows for variations in color intensity depending on sunlight *For more details, please refer to the PDF materials or feel free to contact us.

  • others
  • Metal fittings

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Metal fittingsに関連する検索キーワード

COPYRIGHT © 2001-2026 IPROS CORPORATION ALL RIGHTS RESERVED.