Measuring Instruments Product List and Ranking from 132 Manufacturers, Suppliers and Companies | IPROS

Examples of Damage Measurement and Analysis of Concrete Structures and Steel Structures

We provide a detailed introduction with diagrams and photos on the suitability evaluation of corrosion-resistant nuts and the measurement conditions on-site!

This document introduces examples of 3D measurement and analysis of aging deterioration in concrete and steel structures. It includes topics such as "Concrete spalling of the overpass," "Cracks in the runway," and "Full circumference measurement and wear analysis of ship mooring chains." Please take a moment to read it. 【Contents (excerpt)】 ■ Concrete spalling of the overpass ■ Cracks in the concrete surface ■ Uplift in the concrete surface ■ Cracks in the runway ■ Voids in the seismic isolation foundation concrete columns *For more details, please refer to the PDF document or feel free to contact us.

[Data] Analysis of Weld Quality

Quality analysis immediately after welding for samples 1 to 6, as well as corrosion analysis after use, presented with photos and graphs!

This document introduces the quality analysis conducted immediately after welding by Seiko Wave, as well as the corrosion analysis after use. It includes quality analysis immediately after welding for samples 1 to 6, and in the corrosion analysis after use, it features corrosion types 3 (with black and white gradation (texture) / without black and white gradation), and a corrosion list (with color map / without color map). We present this information clearly along with photos and graphs, so please take a look. [Contents (excerpt)] ■ Quality analysis immediately after welding ■ Corrosion analysis after use *For more details, please refer to the PDF document or feel free to contact us.

Measurement and Monitoring Technology for Structural Deformation DEGRIS

In large structures, we offer deformation shape measurement services for long bridges, continuous bridges, as well as small-scale applications such as slab deflection and test specimens, and we can also accommodate wind turbines for wind power generation.

By simply installing palm-sized devices on the structure, deformation measurement is possible. There is no need to set up observation points outside the structure, and measurements can be conducted even in bad weather or at night. Measurements can be taken from the bridge deck, as well as on tower-like structures such as offshore structures, wind turbine towers, and signposts. It can accommodate both dynamic and static loads from live loads and can be utilized for monitoring under normal traffic conditions and load testing. This achieves labor reduction, safety assurance, shortened construction periods, and cost reduction. (NETIS Registration Number KT-200158-A)

Hand Sanitizer Usage Counter Device

Improve the understanding of disinfection and prevent common issues in all hospitals, such as outbreaks and hospital-acquired infections!

The "Hand Disinfection Frequency Measurement Device" is a tool designed to enhance the intention to disinfect. It serves as a counter that helps prevent outbreaks and hospital-acquired infections, which are common challenges faced by hospitals through hand disinfection, an important means of infection prevention. In actual evaluation tests, 95% of participants reported that it contributed to an increase in awareness. 【Features】 ■ A tool for measuring disinfection frequency to enhance the intention to disinfect ■ Easier management ■ Developed in collaboration under the guidance of Aichi Medical University, currently applying for joint patent *For more details, please refer to the PDF materials or feel free to contact us.

Partial Discharge Measurement and Analysis System

This is an introduction to the elucidation of partial discharge deterioration phenomena in insulating materials and a device that enables long-term insulation deterioration diagnosis!

This document introduces the "Partial Discharge Measurement and Analysis System." It includes the "features" of each component: "hardware," "basic acquisition software," and "statistical analysis software," as well as information on "applications" and "specifications." This device can be applied to the maintenance inspection and equipment diagnosis of facilities handling high voltage, such as underground high-voltage cables, high-voltage receiving equipment, transmission lines, power plants, and substations. Please take a moment to read it. [Contents (Excerpt)] ■ Features ■ Applications ■ Partial Discharge Measurement Device Configuration Diagram ■ Specifications ■ Analysis Software *For more details, please refer to the PDF document or feel free to contact us.

Digital speed gun model 101911 (16 km/h and above) rental

This speed gun can measure speeds in miles per hour (MPH) and kilometers per hour (KPH).

This speed gun can measure speeds in miles per hour (MPH) and kilometers per hour (KPH).

Laserliner Measurement Instruments Special Feature

Essential for maintenance! Great performance in the field of repair and maintenance! A wide range of lineup.

Laserliner is a German measurement instrument brand. It features an easy-to-understand screen display and is widely used in various fields such as civil engineering, construction sites, interior work, and repair and maintenance. - A handy scope that allows detailed inspection and recording of hard-to-see narrow areas - An infrared thermography that visually confirms surface temperature - A laser level that makes it easy to achieve horizontal alignment, among others - We introduce essential products for measurement! ■ List of featured products ■ • Handy scope • Environmental measuring instruments • Testers and voltage testers • Infrared thermography • Distance meters, etc. * For more details, please refer to the PDF document or feel free to contact us. * Purchases are also possible through the "Esco Online Shop" aimed at corporate users.

Measuring instrument "3D Laser Scanner"

A measuring instrument that can obtain 3D data of terrain and structures without touching the measurement target!

The "3D Laser Scanner" is a device that emits laser light thousands of times per second to capture the surrounding conditions in high-density three-dimensional coordinates (point clouds). Unlike traditional optical surveying instruments that measure "single points," it can rapidly fire thousands to hundreds of thousands of lasers per second, allowing for the acquisition of highly accurate data. The acquired three-dimensional data is represented as a collection of points, referred to as "point cloud data," from which the three-dimensional coordinate values of each of the millions or billions of measured points can be instantly used to obtain distances and heights between points. 【Features】 ■ Ability to overlay data with photographs ■ Comparison of measurement data before and after ■ Instant measurement of location information ■ Usable in disaster areas where people cannot approach ■ Three-dimensional completion predictions can be viewed in stages *For more details, please download the PDF or feel free to contact us.

"High-speed/high-precision shape/deformation/vibration measurement" WEB seminar text presentation

Know-how for the development of the world's fastest 3D scanner "4D Sensor" and its wide applications in parts inspection, vibration measurement, and more.

We are currently offering materials for the following webinar! You can view them immediately by clicking on "PDF Download" (approximately 45MByte). Session 1: Company Introduction and Overview of Technology Session 2: Basics of Shape and Deformation Measurement Session 3: Phase Shift Method / OPPA Method (High-Speed Measurement of Shape/Deformation/Vibration) Session 4: Sampling Moiré Method (High-Speed/High-Precision Measurement of Shape/Deformation) Session 5: OPPA Vibration Distribution Meter Session 6: Application Examples (Robotics/Cracks/Real-Time Shape/Vibration) Our company is a research and development-based manufacturing venture originating from Wakayama University. We hold numerous patented technologies, including "Grid Projection Method," "Phase Analysis," "Full Space Table Method," "OPPA Method," and "Sampling Moiré Method," and we have a wealth of experience in developing world-class 3D scanners like the “4D Sensor.” We can provide high-speed and high-precision measurement devices tailored to your needs. Our technology has already been adopted by companies in a wide range of fields, including automotive, construction, power, and railways. 【Application Examples】 Inspection of parts on production lines / Motion measurement of the human body / Measurements from drones Measurement of vibration distribution in automobiles / Measurement of deformation during collisions, etc. *For more details, please contact us or download the PDF.

Rental Power Measurement Device

Rental Remote Monitoring Type Field Measurement System

【Life Cycle Assessment Tool】 In the future, companies will be strongly required to quantitatively assess environmental impacts by understanding the input of resources and energy, as well as the amounts of various emissions, focusing on the "product life cycle." As the first step in energy management for the manufacturing industry, it is necessary to visualize the energy consumption of each piece of equipment to understand the current situation. This device uses a clamp-type alternating current sensor, which can detect current signals simply by clamping it onto the power line. Since there is no need to cut wiring, it is easy to change the installation location. ▶▶▶ For more details, please download the PDF ◀◀◀

Desktop version of the hardened concrete bubble measurement device 'HF-MAC12'

The magnification ratio is approximately 714 times, making it possible to obtain values close to the true value.

The "HF-MAC11/HF-MAC02" is a device that performs bubble recognition tasks during image processing by focusing on the differences in shading caused by the way light hits the measurement surface. According to this method, special processing of the measurement surface (such as embedding resin) is not necessary, and measurement can be performed with only standard polishing treatment. The basic principle involves recognizing bubbles using the difference method on a digital screen and binarizing the image, which is then developed into a linear traverse method. 【Features】 ■ High precision with no individual error ■ Automatic recognition of voids and entrapped air within aggregates ■ No special treatment of the measurement surface required for image analysis (polishing only) ■ Re-editing work is possible ■ Data output in CSV format *For more details, please refer to the PDF materials or feel free to contact us.

Purchase of measurement equipment for fatigue testing machine

This is a task to build a system for automatically conducting fatigue tests!

The purchase of measuring devices for fatigue testing machines is part of the business of building a system to automatically conduct fatigue tests. The main requirements include checking the status of the fatigue testing machine and monitoring the test specimens. Additionally, monitoring of load, number of repetitions, as well as measurement functions for strain, deflection, and temperature are also included in the requirements. 【Main Requirements】 ■ Status check of the fatigue testing machine ■ Monitoring of test specimens ■ Monitoring of load, number of repetitions, etc. ■ Measurement functions for strain, deflection, and temperature *For more details, please download the PDF or feel free to contact us.

3D measurement using SLAM laser and autonomous drone navigation.

Omnidirectional field of view! We acquire 3D data using a SLAM measurement device with laser sensors.

"3D Measurement and Autonomous Drone Navigation using SLAM Laser" realizes the functions of mapping and autonomous drone flight within a single system, enabling collision avoidance and automatic control in GNSS-denied environments and dark places. Data acquisition methods include scanning with a mounted unmanned vehicle or walking while holding the device. It can adapt to various environments such as tunnels, under bridges, indoors, outdoors, and underground. Examples of applications include "underground and cave surveys" and "bridge inspections." **Features of SLAM Laser:** - Real-time mapping and autonomous flight with collision avoidance - Capable of mapping in non-GNSS environments - Suitable for mapping at night or in dark places - High-density point cloud data acquisition with 300,000 points per second - Collision avoidance functionality allows for measurement flights close to structures *For more details, please refer to the PDF document or feel free to contact us.*

Identify the source location before a complaint arises. Noise measurement device "Sound Watcher."

Pinpointing the source of noise. By overlaying it on the site plan, the noise can be easily identified at a glance, enabling a swift response.

The "Sound Watcher" is a noise measurement device that clarifies the sources of noise and contributes to improving productivity at construction sites. It pinpointedly identifies the source of noise, allowing for effective countermeasures. Additionally, it is compact and can be installed in multiple locations without a power supply. Please feel free to contact us when you need assistance. 【Features】 ■ Battery-operated, palm-sized ■ Notifies via email when noise exceeds a certain level ■ Clarifies the source of noise through measurements at multiple locations ■ Instant data analysis ■ Checkable via smartphone *For more details, please refer to the PDF document or feel free to contact us.

Tool "Tsubadashi Ikkyu"

Short size brim extension is possible! A beautiful brim can be finished in just 2 easy steps!

The "Tsubadashi Ikkyu" is a hammer-type tsubadashi tool that uses a three-point crushing method. Compared to conventional models, its integrated parts prevent components from becoming disassembled, allowing for a short tsubadashi of approximately 50mm. The usage method is simple: "Set the Tsubadashi Ikkyu with three points of the flexible pipe" and "Close the lid and strike with a hammer" to achieve a neat tsuba in just two easy steps. 【Features】 ■ Hammer type ■ Three-point crushing method ■ Suitable sizes for flexible pipes of Φ16, Φ16.8, Φ20.0, and Φ24.5 ■ Integrated parts prevent components from becoming disassembled ■ Use our company's water supply flexible pipes *For more details, please refer to the PDF document or feel free to contact us.

Measurement LCM Service

Total support for the lifecycle from the introduction plan of the measuring instrument to disposal.

Our company leverages our expertise as a rental company to provide appropriate services at each phase of the lifecycle—planning, procurement, implementation, operation/management, and updating/disposal—when introducing measurement instruments (systems). We offer a wide range of rental solutions in a one-stop manner. By outsourcing to us, you can eliminate the hassle of managing measurement instruments (systems) and create an environment where you can focus on your core business without worry. Additionally, the benefits vary depending on the method of rental, lease, or purchase. We will propose the most suitable method for our customers. 【Benefits of Rental】 ■ Immediate delivery with just one phone call ■ Access to advanced equipment ■ Hassle-free with guaranteed quality ■ Rental fees are fully deductible as expenses *For more details, please download the PDF or feel free to contact us.

3D measurement business

Versatile use of 3D data is possible! Visualizing the invisible, an advanced 3D measurement business.

In our 3D measurement business, we acquire point cloud data through 3D laser measurement for various applications, including plants, bridges, buildings, cultural properties, and earthquake or fire sites, and visualize it on a PC. Based on the acquired data, we can create models and drawings, allowing for verification of objects without the need to visit the site. This makes it easy to understand the current situation and can be used not only for demolition but also for engineering purposes such as renovations and simulations for replacements. 【Features】 ■ Layout simulation ■ Measurement of distortion, bending, and twisting ■ Before/After shape comparison ■ Walkthrough videos ■ 2D drawing creation *For more details, please refer to the PDF materials or feel free to contact us.

Measurement of Slope on Diagnostic Rails *White Paper Provided

Precisely measure the height difference and gradient between the rails to support the safe operation of cranes.

Measuring the gradient involves precisely evaluating the changes in gradient along the rail. This measurement aims for uniformity in the crane's track and is conducted to support the stable operation of the crane. **Importance of Gradient Measurement** 1. **Stability of Operation** For a crane to operate stably on the rails, it is ideal for the gradient of the rails to be uniform. An uneven gradient can cause the crane to tilt or the load to shift, potentially hindering safe operation. 2. **Reduction of Mechanical Stress** By aiming for a uniform gradient and maintaining it within specified limits, structural stress on the crane can be minimized, leading to reduced maintenance costs. 3. **High-Precision Measurement** With high-precision measurements of the "diagnostic rail," the gradient of the rail can be accurately identified, allowing for the early detection of potential issues related to crane operation. *For more details, please refer to the PDF document or feel free to contact us.*

J-Energy Monitor

Achieve easy access! Understand the electricity consumption on-site and clarify the key points of energy-saving activities.

The "J-Ene Monitor" adds power equipment load management functions to the station's electricity usage performance aggregation feature, providing stronger support for daily on-site management tasks. Measurement results can be viewed online, so no special software or environment is required. You can access the measurement results anytime and anywhere from a computer or smartphone. We utilize information management know-how to provide an environment where you can safely entrust your information. It is also possible to set a password for viewing. We will listen to your needs and propose measurement methods that suit your objectives. 【Features】 ■ Easy access ■ Secure information management ■ Measurement methods tailored to the characteristics of the station ■ Evolving services *For more details, please refer to the PDF materials or feel free to contact us.

Product Catalog Tool 'Extreme PROGEAR(R)'

A wide variety of professional tools such as protective glasses, headlamps, and waist bags are featured!

This catalog features products from Marusan Shoji Co., Ltd., which plans and manufactures the 'Goku PROGEAR(R)' brand of professional tools known for their design and functionality. It offers a wide range of products useful for work, including protective glasses that shield the eyes from various debris and particles generated during tasks, as well as headlamps that are effective for nighttime work or in environments with limited lighting. [Contents] ■ Protective Glasses "SAFETY GEAR" ■ Headlamp "WORK LIGHT" ■ Waist Bag / Support Belt "SOFT GEAR" ■ Mini Cutter / Tape Measure / Stone Hammer / Gear Wrench, etc. *For more details, please download the PDF or feel free to contact us.

3D Foot Shape Automatic Measurement Device 'Real Foot'

Print output is also possible! Measurement information is stored in a database and can be instantly displayed as a three-dimensional model.

"Real Foot" is a three-dimensional automatic foot measurement device that employs a rail-type laser measurement system. It measures the shape of the foot in three dimensions in just about 15 seconds per foot. It accurately reproduces the foot shape by measuring approximately 30,000 points on one foot, including the "instep," "heel," "toes," and "sole" from the ankle down. Additionally, it can be easily set up at events with a dedicated carrying case. 【Features】 ■ Three-dimensional measurement in 15 seconds per foot ■ Cloud management ■ Compact design ■ Approximately 30,000 points per foot ■ Quick startup and analysis ■ Print and smartphone output *For more details, please refer to the PDF document or feel free to contact us.

3D Foot Shape Automatic Measurement Device 'Real Foot Self'

No plaster! Just follow the instructions on the screen, and you can easily measure your feet.

"Real Foot Self" is a three-dimensional foot shape automatic measurement device that dramatically improves work efficiency. It allows for cost and time reduction. By placing the mold on a rotating platform and rotating it twice, scanning is performed with a three-dimensional camera, eliminating the need for plaster. Additionally, since data management is possible, it enables design based on restoration numerical values. 【Features】 ■ Cost reduction ■ Easy restoration function ■ Time saving ■ No plaster required ■ Three-dimensional CAD data creation *For more details, please refer to the PDF document or feel free to contact us.

Measuring device "NUWA Ocular Thermal Camera"

Surface temperature check solution using thermal cameras!

The "NUWA Ocular Thermal Camera" is a device that can measure the surface temperature of objects. Since it is not a medical device intended for body temperature examination, the measured temperature cannot be used as data for medical diagnosis. If an "abnormal" alarm is triggered by measuring the surface temperature, we recommend taking measures such as using a medical device like a "thermometer" to "check" the body temperature. 【Features】 ■ Dual system equipped ■ Automatic correction function with environmental temperature sensor and infrared sensor ■ Mask detection function and face recognition ■ Announcement setting function with robot speech ■ Notification function under specified conditions and daily report function ■ Integration function with other applications (API provided) *For more details, please download the PDF or feel free to contact us.

Angle sensor and vane opening J dimension automatic measurement device 'R-SCT360'

In J dimension measurement, automatic measurement can be performed finely under the same conditions for all samples!

The "R-SCT360" is an automatic measurement device for angle sensors and vane opening dimensions that achieves "prevention of measurement errors," "improvement of working environment," and "reduction of man-hours." It provides the same value regardless of the measurement location, eliminating the need to choose a specific spot for measurement. Additionally, it only enters the furnace during the installation of the angle sensor, and thereafter, measurements are monitored from outside the furnace, significantly reducing the burden on the measurer. 【Features】 ■ Measurement by angle sensor ■ Improvement of measurement environment ■ Ensured safety *For more details, please download the PDF or feel free to contact us.

4th Generation CyTOF XT System

Advanced CyTOF technology, made even more user-friendly. Closer to you than ever.

The "4th Generation CyTOF XT System" inherits CyTOF technology while offering a more affordable price and enhanced user-friendly features. By using antibodies labeled with stable metal isotopes, it enables the analysis of intracellular and extracellular proteins on a single-cell basis. It supports further advancement in basic and clinical research. 【Features】 ■ Multi-parameter analysis of over 40 items in a single tube ■ Objective data acquisition with a simple workflow ■ Analysis of multiple samples in one tube using cell barcoding technology ■ Automated operation with an auto-sampler ■ Added automatic cleaning function and automatic tuning function

【Construction and Maintenance】2D Drawing Creation > Factory Production

Collaboration with 3D measurement devices! Capable of responding quickly from construction planning to actual completion.

Our company offers "2D drawing creation > factory production." In collaboration with 3D measurement devices, we can respond quickly from construction planning to actual completion. Please feel free to contact us when you need our services. *For more details, please download the PDF or feel free to contact us.

Inertial Measurement Device "HSI Series"

Two types are available: "HSI" with a charging circuit and the compact version "HSI-mini"!

The "HSI Series" is a compact high-speed inertial measurement device. The "HSI" with a charging circuit can store acceleration and gyro values in flash memory at a high frequency of 1kHz. It supports a single-cell LiPo battery and can be charged. The compact version "HSI-mini" removes the battery charging function from the HSI, adds a wider range pressure sensor, and further reduces the size. 【Product Lineup】 ■HSI ■HSI-mini *For more details, please download the PDF or feel free to contact us.

Field Data Catcher

Wireless data transfer of analog measurement values.

1. The input voltage from measuring instruments and sensors with analog output is wirelessly transmitted as data. 2. Logging of analog signals such as displacement, pressure, temperature, wind speed, humidity, and inclination wirelessly. 3. Integration from computation to analysis to report output using software.

On-Demand Webinar: Environmental Monitoring in Pharmaceutical Manufacturing

Data Integrity in Environmental Monitoring of Pharmaceutical Manufacturing: From Data Quantity to Data Quality

In this webinar, we will explain the following topics: - How data integrity should be maintained in environmental monitoring - The latest practical information for ensuring data integrity required by current regulatory requirements - Best practices for ensuring data integrity in software used under GxP regulatory environments (Duration: approximately 48 minutes)

e-Guidebook Optimization of Biogas Purification

This e-guidebook provides practical information on how to improve the biogas process through high-precision measurement and control. By making improvements, you can achieve increased profit margins and reduced operational costs.