Outdoor Dust Monitor "FLD-1 Type" [Rental]
Continuous monitoring of dust concentration is possible.
■Measurement range: 0.001 to 100 mg/m³ ■Measurement principle: Light scattering method
- Company:ソーキ
- Price:Other
Last Updated: Aggregation Period:Jul 22, 2026~Aug 18, 2026
This ranking is based on the number of page views on our site.
Last Updated: Aggregation Period:Jul 22, 2026~Aug 18, 2026
This ranking is based on the number of page views on our site.
Last Updated: Aggregation Period:Jul 22, 2026~Aug 18, 2026
This ranking is based on the number of page views on our site.
1261~1290 item / All 1593 items
Continuous monitoring of dust concentration is possible.
■Measurement range: 0.001 to 100 mg/m³ ■Measurement principle: Light scattering method
Unmanned and continuous monitoring of hydrogen sulfide concentration in sewage facilities. This diffusion-type hydrogen sulfide measuring device can be used for corrosion and odor control in sewage facilities.
■ You can check concentration, temperature, battery level, etc. on a large display screen. ■ With the adoption of a power and recording switch, you can choose to start and stop recording. ■ Enhanced waterproof and corrosion-resistant structure (IP66/67), designed to float on water. ■ Even with 1-minute logging, concentration and temperature data can be recorded for one month.
A condensation checker that integrates a hygrometer and an infrared thermometer.
■Calculate the dew point temperature from the temperature and humidity in the atmosphere. ■Equipped with an auto power-off function (can be set in 1-second increments within a range of 5 to 600 seconds). ■Includes an LCD backlight function. ■Storage of the temperature and humidity detection section to protect the humidity sensor.
It is a commonly used rain gauge. It activates a pen based on signals sent from the sensor, allowing for the recording of changes in rainfall on a recording paper.
The tipping bucket rain gauge consists of a water receiving section and a recording section of a self-recording electric counter. The water receiving section is placed outdoors, while the recording section is installed indoors in the observation room, and both are connected by electric wires through a battery to operate.
A water level gauge that simultaneously measures water level and rainfall with simple operation.
- Equipped with a battery level meter function that allows you to see the battery remaining at a glance. - By simultaneously recording instantaneous water levels and rainfall, it is easy to assess water level fluctuations due to rainfall. - Wave damping function that averages wave data. - Simple menu operation with just three buttons.
A soil penetration tester that can easily measure hardness without digging.
■ Continuous hardness measurement possible from the soil surface to a depth of 1 meter ■ Measurement possible even in gravelly soil layers and consolidated soil layers (approximately 5 times at S value 0.1) ■ Handy type makes it easy to read, allowing measurements to be taken by one person ■ The included graphing software "Penetrodia Graph" allows for clear graphing of measured data, enabling immediate assessment of soil hardness quality
Important thermal information that cannot be obtained through temperature measurement alone can be obtained from the measurement of heat flow.
■Heat flow sensor connection One heat flow sensor (TR2-B) is included as standard. (We also offer rental options for low heat flow sensors (TM1-B) and surface type high heat flow sensors (T500B-B).) ■Compact and lightweight, convenient for portability ■Display switching allows for toggling between heat flow values in W/m², kcal/m²h, and temperature in °C. ■Internal memory The data memory can store 20 groups of settings, with a total of 100 sets. ■Adopts a dual power supply system using two AA batteries or an AC adapter.
It is a battery-operated all-day solar radiation meter.
■Wavelength range: approximately 305 to 2,800 nm ■Sensitivity: 5 mW (KW/m²)
It is a digital operation recording device (Task Watch) that accurately records the operation management and activity logs of snow removal machines and vehicle-type construction machinery using an acceleration sensor.
■It records vibrations electronically using a 3-axis accelerometer. ■No battery replacement is needed for up to 60 days. *Recorded data can be imported into the standard attached software using USB.
This is a film thickness gauge for measuring the thickness of coatings such as paint.
It can measure coatings of both magnetic and non-magnetic metals with a single unit. Additionally, data can be transmitted to a PC using the included software and USB cable. ■Measurement range: 0 to 2,000μm
Wireless probe capable of measuring and recording wind speed and temperature via Bluetooth communication.
The testo 405i is a thermal wire anemometer smart probe that can measure wind speed, wind temperature, and airflow. It is compact and highly portable, and the measurements can be checked on a smartphone or tablet via Bluetooth communication. Additionally, specialized analysis results can be easily obtained through the calculation and display functions of the dedicated app. 【Features】 ■ Displays measurement values on Android/iOS devices (smartphones and tablets) ■ Connects up to 6 probes to a single device for simultaneous measurement ■ Graph display of measurement data, saving (Android only), and email sending capabilities ■ Duct information settings available in airflow calculation mode ■ Dedicated app available for download from Google Play and the App Store (free) ■ Wireless probe capable of measuring and recording wind speed and temperature via Bluetooth communication ■ The rod with a scale indicating insertion length is up to 400mm long, can be bent 180°, and allows measurement at any angle.
簡単な操作でWBGTおよび気温・相対湿度・輻射温度を瞬時に測定できる、ハンディタイプの熱中症指標計です。
WBGT(環境温度を総合的に評価する指標)を測定して、熱中症対策に。簡単な操作でWBGTおよび気温・相対湿度・輻射温度を瞬時に測定できる、ハンディタイプの熱中症指標計です。 ■WBGT(Wet Bulb Globe Temperature index)とは WBGTとは、湿球温度、乾球温度および黒球温度を測定することにより求められる指標で、高温環境下での作業やスポーツ等を行う際、暑熱による障害を予防するために使われるものです。 ・ 室内もしくは室外で日光照射の無い場合→ WBGT=0.7×湿球温度+0.3×黒球温度 ・ 室外で日光照射のある場合→WBGT=0.7×湿球温度+0.2黒球温度+0.1×乾球温度 ■操作方法 ・電源ON→すぐにWBGT表示 ・切換ON→気温表示 ・切替ON→相対湿度表示 ・切替ON→輻射熱(黒球)表示
It is possible to measure the ferrite content in austenitic and duplex stainless steels.
It is possible to measure the ferrite content in austenitic and duplex stainless steels. Ferrite in metals can induce and promote corrosion. Therefore, managing ferrite content is an important issue.
It is a compact and high-performance digital display elastic wave velocity measuring instrument that fits in the palm of your hand.
It is a compact digital display type 1-channel elastic wave velocity measuring instrument. By striking the excitation point with a hammer, the arrival time of the elastic wave to the receiving point can be measured.
It comes with a soft case and strap. Calibration certificate can be issued.
It comes with a soft case and strap. Calibration certificate can be issued.
The deformation coefficients and static elastic coefficients of structures such as dams, tunnels, water pressure pipelines, and power plants, as well as the dry uniaxial compressive strength, can be measured quickly and easily.
It is essential to quickly and easily measure the deformation coefficient, static elastic modulus, and dry uniaxial compressive strength of rock, which are fundamental data for the design of structures such as dams, tunnels, water pressure pipelines, and power plants. It has a printing function, allowing for simple data storage. ■ Data can be recorded on paper. *Recording paper is sold separately. ■ One roll of recording paper can record approximately 2,850 measurement data points.
The installation of a backlit LCD screen allows for checking time-lapse graphs and past data on-site.
Data collection is as simple as inserting an SD card, and device settings can be easily adjusted using only the main menu buttons. It is a water level gauge that can immediately display time-series change graphs on-site.
It is a total station that has a built-in digital camera and allows you to check real-time sighting images.
It is a total station that has a built-in digital camera and allows you to check real-time sighting images.
The safety angle is a safety accessory that supports the prevention of damage accidents to overhead structures such as overhead wires and pedestrian bridges.
When the boom exceeds the angle set in advance, it alerts the operator to danger with a buzzer and LED flashing. 【Features】 ■ Easy angle adjustment to suit the work site ■ Wireless, eliminating the need for troublesome wiring
It is used for the fluidity test of injection mortar for pre-packed concrete.
It is used for fluidity testing of precast concrete and for measuring the fluidity of pastes with low stickiness.
This is a remote display for the LS-B2 level sensor used for machine control.
Remote display for the LS-B2 level sensor for machine control. The LS-B2 level sensor for machine control can be combined with a rotating laser to perform grading work accurately and efficiently.
It is an alarm auxiliary device that alerts both workers and operators within the danger zone of heavy machinery.
This is a set of a monitoring sensor and a helmet sensor that can be attached to the worker's helmet. *Additional helmet sensors and chargers are available as options. 【Features】 ■Detection by sensors. Alerts both workers and drivers to danger. When a worker equipped with the helmet sensor enters the detection area of the monitoring sensor, the driver is alerted by an operator buzzer, and the worker receives an alarm sound from the helmet sensor. The monitoring sensor can switch between 5m and 10m according to the speed of the heavy machinery. The sensor is attached to the rear of the heavy machinery with a magnet. ■Adopts a charging method. Fewer troublesome wires and easy to attach and detach. The monitoring sensor and helmet sensor use a charging method, making them easier to use than relying on the vehicle's power supply. The operator buzzer is attached to the driver's side with a magnet. The buzzer volume can be switched between loud, soft, and silent using a switch. ■Compact and lightweight sensor attached to the helmet, does not interfere with work. The helmet sensor is attached to the helmet with a rubber belt. It is lightweight and easy to attach. The helmet sensor can detect within a reception range of 240° behind the worker. Additionally, when the battery is low, an electronic buzzer and vibration will continuously operate for about 2 minutes to alert the worker.
You can log, display, print, record, and output alarm information for rainfall. Alarm settings can be configured for primary and secondary settings based on cumulative rainfall for 1 hour, 24 hours, and 48 hours.
You can log, display, print, record, and output alarm information for rainfall. Alarm settings can be configured for primary and secondary settings based on cumulative rainfall over 1 hour, 24 hours, and 48 hours.
It can measure the outdoor wind speed and display both instantaneous and average values simultaneously. When combined with optional sirens or rotating lights, it can also be integrated into an alarm system.
It can measure the outdoor wind speed and display both instantaneous and average values simultaneously. When combined with optional sirens or rotating lights, it can also be configured as an alarm system.
Using capacitive electromagnetic methods, we calculate asphalt density, Marshall value, and void ratio.
No correction for temperature or moisture is necessary; simply point it at the measurement location to easily measure the density and void ratio after compaction during asphalt laying.
It amplifies the distortion of the bimetal caused by temperature changes and transmits it to the pen for measurement and recording. It uses dry batteries for power within a measurement range of -15 to 40°C.
The distortion of the bimetal due to temperature changes is amplified and transmitted to the pen for measurement and recording. The measurement range is from -15 to 40°C, and the power source uses dry batteries.
This is a high-precision laser vertical instrument capable of measuring from the ground up to 150 meters above for vertical management of buildings and setting standards for construction work.
High-precision vertical alignment is possible with visible light lasers.
Ensure thorough front and rear checks from the driver's seat. Eliminate blind spots with four cameras.
■Field of view ■Horizontal: approximately 122.8° ■Vertical: approximately 91.3°
The MP30 can measure the ferrite content in austenitic and duplex stainless steels.
Corrosion is induced and accelerated by ferrite in metals. Therefore, managing the ferrite content is an important issue. ■ Ultra-compact, lightweight, and easy to carry ■ Equipped with a high-precision microprocessor ■ Statistical calculations can be easily accessed with the push of a button ■ Built-in auto-reference function adjusts sensitivity with each measurement, ensuring no time-dependent changes ■ A special program controls the input timing of the film thickness signal, preventing abnormal values from entering due to miscontact
Laser sensor for machine control
■Detection width: 171mm ■Detection direction: 360°