Joint Product List and Ranking from 113 Manufacturers, Suppliers and Companies | IPROS

Last Updated： Aggregation Period:Aug 12, 2026～Sep 08, 2026
This ranking is based on the number of page views on our site.

Joint Manufacturer, Suppliers and Company Rankings

Last Updated： Aggregation Period:Aug 12, 2026～Sep 08, 2026
This ranking is based on the number of page views on our site.

  1. SK-KAWANISHI Co., Ltd. Kagawa//Building materials, supplies and fixtures manufacturers
  2. null/null
  3. 明和工業 Niigata//Water supply and drainage construction business
  4. 4 アトムズ Chiba//Building materials, supplies and fixtures manufacturers
  5. 5 日本ヴィクトリック Tokyo//Building materials, supplies and fixtures manufacturers
Go to Company Ranking

Joint Product ranking

Last Updated： Aggregation Period:Aug 12, 2026～Sep 08, 2026
This ranking is based on the number of page views on our site.

  1. MD joint (flexible joint for drainage steel pipes)
  2. One-touch mechanical architectural piping system / Grooved joint 明和工業
  3. MD-NC Joint (Heat-Resistant and Chemical-Resistant Nylon Coated Fitting)
  4. 4 PVC pipe x SUS pipe Suction M joint for SUS pipe SK-KAWANISHI Co., Ltd.
  5. 4 Pressure gauge valve (for cold and hot water, for steam) gauge joint ISHIGURO Co.,Ltd.

Joint Product List

181～210 item / All 382 items

Displayed results
[Case Study] Contributing to Cost Reduction and Environmental Conservation through Efficiency in Steam Management

[Case Study] Contributing to Cost Reduction and Environmental Conservation through Efficiency in Steam Management

Improve efficiency through steam management, contributing to cost reduction and environmental conservation!

At the paper manufacturing company, in the dry part of the paper machine (the machine used to produce paper), there was a high usage of steam, leading to increased costs, and frequent maintenance was causing issues in terms of time, effort, and expenses. Issues: 1. The amount of steam supplied to the cylinder dryers is excessive. 2. To increase production, there is a desire to increase machine speed. 3. The wear of the seal rings (carbon) in the rotary joints currently in use is rapid, resulting in significant losses due to steam leaks, and maintenance requires a considerable amount of time and effort. 4. There are temperature inconsistencies on the surface of the cylinder dryers, leading to poor product yield. In the process of manufacturing thick paper at the paper mill, a large amount of steam is introduced into several large cylinder dryers (approximately φ2000) to heat the surface and facilitate drying.

  • others
  • Joint

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Examples Related to Labor Saving] Screw Joint for the Water Heater Industry

[Examples Related to Labor Saving] Screw Joint for the Water Heater Industry

Streamlining water tests, solving challenges with a one-touch screw joint!

We received an inquiry from a customer who manufactures water heaters, seeking to improve the efficiency of their inspection process, which includes checking for cracks in the piping and leaks from welds through water flow tests before shipment. We proposed a specially designed "male joint" tailored to their work. As a result, the time required for inspections has been significantly reduced. The number of inspections that can be conducted per day has increased from 80 to 240, tripling the capacity. [Case Study] ■ Issues - Time-consuming installation and removal - Past incidents of seal tape remnants entering the piping ■ Proposal - We proposed a specially designed male joint tailored to their work. *For more details, please refer to the PDF document or feel free to contact us.

  • others
  • Joint

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Single pipe assembly joint 3-way T-joint / M4162TY-TA1N

Single pipe assembly joint 3-way T-joint / M4162TY-TA1N

Single pipe assembly joint 3-way T-joint / Part number M4162TY-TA1N

It is compatible with the commonly used φ48.6mm single pipes in the country. We have developed a variety of types that connect pipes and can be utilized in various situations. We create new things in new ways.

  • Expansion joint hardware
  • Joint

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Spherical Flexible Joint "DL-FLEX"

Spherical Flexible Joint "DL-FLEX"

The liquid contact part is made of fluororesin, which has excellent heat resistance and chemical resistance, while also possessing properties such as water repellency, oil repellency, and non-stickiness.

"DL-FLEX" is a spherical flexible joint coated with synthetic rubber on the outer surface of fluororesin, handled by Chūnichi Giken Kōgyō Co., Ltd. Since the liquid-contacting part is made of fluororesin, it excels in heat resistance and chemical resistance, while also possessing properties such as water repellency, oil repellency, and non-stickiness. 【Usage Range】 ■ Maximum operating pressure: 1.0 MPa (however, this may vary depending on usage conditions.) ■ Maximum operating temperature: 100°C (however, this may vary depending on usage conditions.) ■ If the fluid is a gas, the maximum operating pressure will change, so please inquire. (1) It cannot be used in locations such as the delivery side of pressurized or booster water pumps, where pressure fluctuations occur frequently. (2) Due to the characteristics of the material, there is a possibility of reduced sealing performance. In this case, please perform re-tightening or use a gasket. *For more details, please refer to the PDF document or feel free to contact us.

  • others
  • Joint

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Cylindrical Flexible Joint "T-FLEX C"

Cylindrical Flexible Joint "T-FLEX C"

The liquid contact part is made of fluororesin, which has excellent heat resistance and chemical resistance, while also possessing properties such as water repellency, oil repellency, and non-stickiness.

"T-FLEX C" is a cylindrical flexible joint coated with synthetic rubber on the outer surface of fluororesin, handled by Chūnichi Giken Kōgyō Co., Ltd. The inner surface is made of a corrugated hose, allowing it to accommodate large amounts of eccentricity. 【Usage Range】 ■ Maximum operating pressure: 1.0 MPa (However, this may vary depending on usage conditions.) ■ Maximum operating temperature: 100°C (However, this may vary depending on usage conditions.) ■ If the fluid is gas, the maximum operating pressure will change, so please contact us. * If used beyond the maximum operating pressure (1.0 MPa), we will conduct a separate structural review, so please contact us. (1) It cannot be used in locations such as the delivery side of pressurized or booster water pumps, where pressure fluctuations occur frequently. (2) Due to the material properties, there is a possibility of reduced sealing performance. In this case, please perform retightening or use a gasket. * For more details, please refer to the PDF materials or feel free to contact us.

  • others
  • Joint

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Ball Joint KGL

Ball Joint KGL

A swivel joint suitable for approaching inclined work!

This is a swivel joint that is effective when approaching inclined workpieces. It maintains the shape during suction even after lifting the workpiece. It can accommodate angles of up to 15° in all directions. For more details, please contact us or refer to the catalog.

  • others
  • Joint

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Adjacent joint SVS-STV, SVS-GE

Adjacent joint SVS-STV, SVS-GE

A partition joint that makes it easy to connect with hoses and equipment!

The adjacent joint SVS-STV and SVS-GE series are accessories suitable for mounting applications that sandwich holders and plates. They are available in two types: one with a quick-connect hose connector on the top (SVS-STV) and another with threaded connections (SVS-GE), making it easy to attach hoses, ejectors, and devices. For more details, please contact us or refer to the catalog.

  • others
  • Joint

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
HJ-1 - JAROCK NICO Series -

HJ-1 - JAROCK NICO Series -

This is the NICO pipe series by JAROCK (Irector parts).

HJ-1 is the most basic joint set in the NICOpipe & joint system. By combining two H-1s with bolts and nuts, pipes can be joined and fixed vertically. For examples of construction using this product, please feel free to contact our sales representatives.

  • Expansion joint hardware
  • Pipeline Construction
  • Joint

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
HJ-4 - JAROCK NICO Series -

HJ-4 - JAROCK NICO Series -

This is the NICO pipe series by JALOC (Irector parts).

HJ-4 creates a shape where pipes intersect in a straight line. By combining two H-4s with bolts and nuts, the pipes are connected vertically. HJ-1 fixes at the ends of the pipes, while HJ-4 fixes at the center of the pipes. The joints are available not only as a set but also for individual purchase of H-4. Please feel free to contact our sales representatives.

  • Expansion joint hardware
  • Pipeline Construction
  • Joint

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
HJ-5 - JALOCK NICO Series -

HJ-5 - JALOCK NICO Series -

This is the NICO pipe series by JALOC (Irector parts).

The HJ-5 is the joint that has the most intersections with pipes. By combining four H-2s with bolts and nuts, a three-dimensional shape is created. The joints are available not only as a set but also for individual purchase of the H-2. Please feel free to contact our sales representatives.

  • Expansion joint hardware
  • Pipeline Construction
  • Joint

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
HJ-6 - JAROCK NICO Series -

HJ-6 - JAROCK NICO Series -

This is the NICO pipe joint series by JALOC.

You can choose one type from trivalent, black electrodeposition, or nickel as part of the set contents. In addition to the set, we also offer individual sales.

  • Expansion joint hardware
  • Pipeline Construction
  • Joint

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
HJ-7 - JAROCK NICO Series -

HJ-7 - JAROCK NICO Series -

This is the NICO pipe joint series from JALOC.

This is a joint that connects at an angle. The set includes one type selected from trivalent, black electrodeposition, or nickel. In addition to the set, we also offer individual sales.

  • Expansion joint hardware
  • Pipeline Construction
  • Joint

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
HJ-9 - JAROCK NICO Series -

HJ-9 - JAROCK NICO Series -

This is the NICO pipe joint series from JALOC.

You can choose one type from trivalent, black electrodeposition, or nickel as part of the set. We also offer individual sales in addition to the set.

  • Expansion joint hardware
  • Pipeline Construction
  • Joint

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
HJ-10 - Jarock NICO Series -

HJ-10 - Jarock NICO Series -

This is the NICO pipe joint series by JALOC.

You can choose one type from trivalent, black electrodeposition, or nickel for the set contents. We also offer individual sales in addition to the set.

  • Expansion joint hardware
  • Pipeline Construction
  • Joint

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
HJ-12 - JALOC NICO Series -

HJ-12 - JALOC NICO Series -

This is the NICO pipe joint series from JALOC.

This is a joint with a wider gap than the HJ-10. The set includes one type selected from trivalent, black electrodeposition, or nickel. In addition to the set, individual sales are also available.

  • Expansion joint hardware
  • Pipeline Construction
  • Joint

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
HJ-13 - JAROCK NICO Series -

HJ-13 - JAROCK NICO Series -

This is the NICO pipe joint series from JALOC.

You can choose one type from trivalent, black electrodeposition, or nickel for the set contents. We also offer individual sales in addition to the set.

  • Expansion joint hardware
  • Pipeline Construction
  • Joint

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
HJ-14 - JAROCK NICO Series -

HJ-14 - JAROCK NICO Series -

This is the NICO pipe joint series from JALOC.

You can insert boards or similar items in between. The set includes one type chosen from trivalent, black electrodeposition, or nickel. We also offer individual sales in addition to the set.

  • Expansion joint hardware
  • Pipeline Construction
  • Joint

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
HJ-15 - JAROCK NICO Series -

HJ-15 - JAROCK NICO Series -

This is the NICO pipe joint series from JALOC.

You can choose one type from trivalent, black electrodeposition, or nickel as part of the set. We also offer individual sales in addition to the set.

  • Expansion joint hardware
  • Pipeline Construction
  • Joint

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Expansion Joint "EP Joint" [High Pressure SP Type]

Expansion Joint "EP Joint" [High Pressure SP Type]

High-pressure type! Absorbs vibrations, noise, expansion, and displacement in piping systems! High pressure resistance, excellent chemical and heat resistance! Suitable for water supply systems! [Ministry of Land, Infrastructure, Transport and Tourism specifications]

Expansion joints (flexible joints/rubber joints) are used for preventing vibrations and noise generated from piping systems, absorbing expansion and displacement due to temperature and pressure changes, as well as accommodating various dimensional fluctuations during installation and mitigating or preventing the effects of earthquakes and ground subsidence. They are considered essential components in piping equipment. The E-P joint was launched in 1970 (Showa 45) as a low-pressure R type for elevated water tanks, and since then, it has added new products to meet customer needs, including the high-pressure P type integrated with PTFE, known as the F type. Today, it is used by a wide range of customers across various industries, from household drinking water to chemical plant piping. 【Features】 1. Minimal dimensional changes between surfaces due to internal pressure 2. Effective in vibration control 3. High pressure resistance performance usable up to 1.96 MPa (20 kgf/cm²) 4. The inner surface uses synthetic rubber with excellent chemical and heat resistance 5. Small arch with minimal liquid pooling 6. Applicable for drinking water supply For more details, please contact us or refer to the catalog.

  • Expansion joint hardware
  • Piping Equipment
  • Water Supply Facilities
  • Joint

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Expansion Joint "EP Joint" [Spherical Flex]

Expansion Joint "EP Joint" [Spherical Flex]

Spherical type! Absorbs vibrations, noise, expansion, and displacement in piping systems! Active in air conditioning equipment, water supply and drainage sanitary equipment, and various plant facilities! [Ministry of Land, Infrastructure, Transport and Tourism specifications]

Expansion joints (flexible joints/rubber joints) are used to prevent vibrations and noise generated from piping systems, absorb expansion and displacement due to temperature and pressure changes, and mitigate or prevent the effects of various dimensional changes during installation, as well as impacts from earthquakes and ground subsidence. They are considered essential components in piping systems. Since the launch of the low-pressure R type for elevated water tanks in 1970, E-P joints have added new products to meet customer needs, including the integrated high-pressure P type PTFE and the F type. Today, they are used by a wide range of customers across various industries, from household drinking water to chemical plant piping. 【Features】 1. Excellent vibration absorption 2. Superior installation work due to the use of loose flanges For more details, please contact us or refer to the catalog.

  • Expansion joint hardware
  • Piping Equipment
  • Water Supply Facilities
  • Joint

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Expansion Joint "EP Joint" [PL Type Small Diameter]

Expansion Joint "EP Joint" [PL Type Small Diameter]

Pressure type! Absorbs vibrations, noise, expansion, and displacement in piping systems! Active in absorbing expansion and displacement in factory equipment piping and water supply and drainage piping!

Expansion joints (rubber joints) are used for preventing vibrations and noise generated from piping systems, absorbing expansion and displacement due to temperature and pressure changes, as well as accommodating various dimensional fluctuations during installation and mitigating or preventing impacts from earthquakes and ground subsidence. They are considered essential components in piping equipment. The E-P joint was launched in 1970 (Showa 45) as a low-pressure R type for elevated water tanks. Since then, it has expanded to include new products that meet customer needs, such as the high-pressure P type integrated with PTFE and the F type. Today, it is used by a wide range of customers in various industries, from household drinking water to chemical plant piping. 【Features】 1. Greater allowable displacement than the P type. 2. Stable durability due to the combination of strong reinforcing fibers and reinforcing steel wires. 3. EPDM is used for the inner and outer rubber, providing excellent chemical resistance and weather resistance. 4. The use of loose flanges makes installation work easier. For more details, please contact us or refer to the catalog.

  • Expansion joint hardware
  • Piping Equipment
  • Water Supply Facilities
  • Joint

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Expansion Joint "EP Joint" [PB Type]

Expansion Joint "EP Joint" [PB Type]

Pressure type! Absorbs vibrations, noise, expansion, and displacement in piping systems! Effective for vibration damping in general-purpose pumps and blowers in factory equipment, as well as for absorbing expansion in heat-resistant resin piping!

Expansion joints (rubber joints) are used for preventing vibrations and noise generated from piping systems, absorbing expansion and displacement due to temperature and pressure changes, as well as accommodating various dimensional fluctuations during installation and mitigating or preventing impacts from earthquakes and ground subsidence. They are considered essential components in piping equipment. The E-P joint was launched in 1970 (Showa 45) as a low-pressure R type for elevated water tanks. Since then, we have added new products to meet customer needs, including the high-pressure P type integrated product F type with PTFE. Today, our products are used by a wide range of customers in various industries, from household drinking water to chemical plant piping. 【Features】 1. A sponge core is embedded inside the arch of the P type to straighten the inner surface and prevent liquid pooling. 2. The use of loose flanges enhances installation work. For more details, please contact us or refer to the catalog.

  • Expansion joint hardware
  • Piping Equipment
  • Water Supply Facilities
  • Joint

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Expansion Joint "EP Joint" [PF Type]

Expansion Joint "EP Joint" [PF Type]

Pressure and internal PTFE type! Absorbs vibrations, noise, expansion, and displacement in piping systems! Active in piping for corrosive fluids in chemical plants and vibration prevention for corrosion-resistant pumps!

Expansion joints (rubber joints) are used for preventing vibrations and noise generated from piping systems, absorbing expansion and displacement due to temperature and pressure changes, as well as accommodating various dimensional fluctuations during construction and mitigating or preventing impacts from earthquakes and ground subsidence. They are considered essential components in piping installations. The E-P joint was launched in 1970 (Showa 45) as a low-pressure R type for elevated water tanks, and since then, it has added new products to meet customer needs, including the high-pressure P type integrated with PTFE, known as the F type. Today, it is used by a wide range of customers across various industries, from household drinking water to chemical plant piping. 【Features】 1. Pressure type PTFE (polytetrafluoroethylene) inner surface coating type 2. Uses PTFE in the liquid contact area (inner surface), offering excellent chemical resistance 3. Improved resistance to external impacts through integration with durable and strong rubber For more details, please contact us or refer to the catalog.

  • Expansion joint hardware
  • Piping Equipment
  • Water Supply Facilities
  • Joint

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Expansion Joint "EP Joint" [P Type / Large Diameter]

Expansion Joint "EP Joint" [P Type / Large Diameter]

Pressure type! Absorbs vibrations, noise, expansion, and displacement in piping systems! Effective in vibration damping for general-purpose pumps and blowers in factory equipment, as well as absorbing expansion in heat-resistant resin piping!

Expansion joints (rubber joints) are used to prevent vibrations and noise generated from piping systems, absorb expansion and displacement due to temperature and pressure changes, as well as to accommodate various dimensional fluctuations during installation and mitigate or prevent the effects of earthquakes and ground subsidence. They are considered essential components in piping installations. The E-P joint was launched in 1970 (Showa 45) as a low-pressure R type for elevated water tanks, and since then, new products have been added to meet customer needs, including the F type, which is an integrated product with the high-pressure P type PTFE. Today, it is used by a wide range of customers across various industries, from household drinking water to chemical plant piping. 【Features】 1. Stable durability due to the combination of strong reinforcing fibers and reinforcing steel wires. 2. Use of EPDM for inner and outer rubber, providing excellent chemical resistance and weather resistance. 3. Excellent installation work due to the adoption of loose flanges. For more details, please contact us or refer to the catalog.

  • Expansion joint hardware
  • Piping Equipment
  • Water Supply Facilities
  • Joint

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Direct water supply joint

Direct water supply joint

Directly convenient with water supply from the faucet!

No excess water is used with direct water supply from the faucet! Since it's direct, there are no clogs from debris, and no blockages in valves or nozzles, allowing for safe operation. It fits any faucet.

  • others
  • Joint

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Z Swivel Joint Set

Z Swivel Joint Set

Rotate freely in 360 degrees! No twisting or bending, smooth operation!

Attach it to the airless gun of the painting machine, and it can easily rotate 360 degrees up and down with wrist movement and twisting. When attached to the main body of the painting machine, it significantly reduces the hassle of hose sagging and retraction, greatly decreasing the chances of the hose getting caught on scaffolding.

  • paint
  • Renovation and repair methods
  • Interior and exterior wall coating materials
  • Joint

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Universal Joint "MC/MC-D Type"

Universal Joint "MC/MC-D Type"

Allowable angle! By breaking under excessive torque, it interrupts the torque between the drive and driven components.

We would like to introduce the universal joint 'MC/MC-D type' that we handle. This flexible shaft coupling utilizes a cross-shaped intermediate body, allowing power transmission even when the angular misalignment between the two axes is particularly large. The "MC type" is single, while the "MC-D type" is double. When using a spring pin, a hole slightly smaller than the outer diameter of the pin should be drilled, and the pin is press-fitted into that hole for fastening. 【Features】 ■ Single: Allows angular misalignment ■ Double: Allows angular misalignment and eccentricity ■ Made of resin: Breaks under excessive torque to interrupt torque transmission between the driving and driven sides ■ Backlash: None ■ Electrical insulation: Yes *For more details, please refer to the PDF document or feel free to contact us.

  • Parts and Materials
  • Fittings
  • Joint

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Universal Joint "MD Type"

Universal Joint "MD Type"

Introducing a universal joint that can transmit power even when the angle between the two axes is particularly large!

We would like to introduce the universal joint 'MD type' that we handle. This flexible shaft coupling utilizes a cross-shaped intermediate body, allowing it to transmit power even when the angle between the two axes is particularly large. For shaft fastening, we recommend using a spring pin (not included) or a set screw, depending on the application. 【Features】 ■ Allows for angular misalignment ■ Breaks under excessive torque, cutting off torque between the driving and driven sides ■ Backlash: None ■ Electrical insulation: Yes ■ Magnetism: None (excluding screws) *For more details, please refer to the PDF document or feel free to contact us.

  • Fittings
  • Parts and Materials
  • Joint

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Universal Joint "MZ/MZD/MZT Type"

Universal Joint "MZ/MZD/MZT Type"

Utilizing a cross-shaped intermediate body! A structure that eliminates backlash by fitting multiple balls into the hubs on both sides.

The "MZ/MZD/MZT type" is a metal universal joint. It features a structure that eliminates backlash by fitting multiple balls into hubs on both sides. We recommend using a key or set screw for shaft fastening. Utilizing a cross-shaped intermediate body, it is a flexible shaft coupling that can transmit power even when the angular misalignment between the two shafts is particularly large. 【Features】 ■ Misalignment - Single: Allows angular misalignment - Double: Allows angular misalignment and eccentricity - Telescopic: Allows angular misalignment, eccentricity, and end play ■ Backlash: None ■ May have magnetic properties *For more details, please refer to the PDF document or feel free to contact us.

  • Fittings
  • Parts and Materials
  • Joint

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to Joint

IPROS Services
COPYRIGHT © 2001-2026 IPROS CORPORATION ALL RIGHTS RESERVED.