Last Updated： Aggregation Period:Feb 04, 2026～Mar 03, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Feb 04, 2026～Mar 03, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Feb 04, 2026～Mar 03, 2026
This ranking is based on the number of page views on our site.
31～60 item / All 295 items
Sound and Light Safety: Life's Whistle Series
Crime prevention, disaster prevention, traffic safety (using ultra-high brightness reflective materials) Recommended by the National Crime Prevention Association Recommended by the Tokyo Crime Prevention Association Registered by the Osaka Prefecture Crime Prevention Association
A simple back burr removal holder that can be used with machines equipped with NC as well as robots and various dedicated machines.
The "T10 type" is a simple back burr removal holder that has a 10mm extension mechanism only in the axial direction. The holder is equipped with a built-in 10mm extension mechanism, allowing for processing while constantly applying pressure to the cutting edge against the back burr removal machining surface. It comes standard with three types of springs of varying strengths, allowing customers to freely replace the built-in spring according to the material of the workpiece being processed. 【Features】 ■ Built-in 10mm extension mechanism only in the axial direction ■ Comes standard with three types of springs of varying strengths ■ Maximum allowable rotational speed of 10,000 min-1 ■ Ability to adjust the cutting tool's pressing force according to the workpiece material *For more details, please refer to the PDF document or feel free to contact us.
Automatic "Skilled Worker Level Deburring" Achieved with FINESYSTEM's Deburring Robot Cell
Burrs refer to protrusions or excess parts that occur during the processes of metalworking or resin (plastic) processing, and they generally have irregular and sharp shapes. According to JIS standard JIS B 0051, they are defined as "residues on parts from machining or molding processes that are external remnants of geometric shapes at the edges of corners." Burrs are formed during the process of cutting or shaping metal when the material stretches and tears. **Three Reasons to Remove Burrs:** - To prevent product failure and wear - To enhance assembly accuracy - To ensure product safety Traditionally, burr removal has been considered a manual task. At FINESYSTEM, we are developing an automated burr removal system that achieves "skilled worker-level burr removal" to address challenges such as high quality, labor hours, and worker shortages that have been identified in the burr removal process, as well as developing and manufacturing burr removal holders and tools. For more details, please download the PDF document or feel free to contact FINESYSTEM.
Approaching the narrow areas of large work! Powerful burr removal with high torque.
[Finesystem Products: AF150 and AF110 Models, SFT48-HiSP-QC Model Exclusive] - High torque air float attachments for AF150 and AF110 models - High torque QC motor spindle SFT48-HiSP-QC model This is a dedicated angle head holder that adopts our original standard QCT48 shank. ■ Enables deburring in narrow gaps of large workpieces! With the angle head holder installed, it is now possible to handle deburring in narrow gaps of large workpieces such as aluminum die-cast, low-pressure casting, and gravity casting, which was difficult for robots equipped with large motor spindles. ■ Nuts… Adopts Hi-Q/ERB25 and Hi-Q/ERB32 nuts! ■ Collets… Adopts ER25 and ER32 collets that meet the world standard DIN6499/ISO15488 specifications. The gripping diameter for ASR16 model is φ0.5 to φ16.0, and for ASR20 model is φ0.5 to φ20.0. ■ Maximum rotation speed is 10,000 min-1 for ASR16 model and 6,000 min-1 for ASR20 model. ■ High clamping force is ensured by the unique dual-surface constrained QCT48 shank.
A classical toilet paper holder that exudes a simple and retro atmosphere.
The "Paper Holder Classic Brass Series" is a classical toilet paper holder that exudes a simple and retro atmosphere. While it has an antique feel, its simple design allows it to blend naturally into the bathroom. The paper insertion bar is made of wood, and changing the paper is very easy—just insert it into the bar and hook the arm part. 【Features】 ■ Simple and retro atmosphere ■ Design that blends naturally into the bathroom ■ With cover ■ Paper insertion bar is wooden ■ Available in three finishes: clear (gold), antique finish, and old white finish *For more details, please refer to the PDF document or feel free to contact us.
European antique design resembling seashells! Made with high-quality brass!
The "Paper Holder Polished Brass Series" is a toilet paper holder with a popular European antique design resembling seashells. It features resin parts in the movable sections, ensuring a silent operation without metallic sounds when dispensing paper. The arm can be reversed and replaced, allowing for the paper to be set from the left. This series is made with a generous amount of high-quality brass and is crafted through forging, offering a superior level of quality. 【Features】 ■ European antique design resembling seashells ■ Resin parts used in movable sections ■ Silent operation without metallic sounds when dispensing paper ■ Made with high-quality brass *For more details, please refer to the PDF document or feel free to contact us.
Code Holder Sukkiri-kun
A clean worksite is a silent salesperson. 【Features】 ○ Easily organize cables crawling on the floor of the worksite! ○ Contributes to beautifying the site, greatly improving work efficiency, cleanliness, and safety!! ● For other functions and details, please download the catalog.
MD/AD dowel shelf support dedicated component for supporting glass shelves and wooden shelves, safety measure product.
MD/AD Dowel Shelf Support Dedicated Shelf Board Holder Features - This product supports glass and wooden shelves when placed on MD dowel shelf supports. - It is easy to install by simply pushing it into the MD dowel support, allowing for easy installation and removal. - By using an L-shaped support (for wooden shelves), you can place the shelf without any processing, which helps prevent shifting of the shelf and eliminates the need for additional processing. - Depending on the application, you can combine three types for use, which helps prevent the shelf from shifting forward and backward or falling, making it a safety measure as well.
This is an electromagnetic release that allows the normally closed fire door to be opened and held open at any time. The magnetic adhesion can be easily pulled apart by hand!
The "Magnet Door Holder" is an electromagnetic release designed for normally closed fire doors, operating continuously with power. It is an excellent product that can be used not only in new constructions but also for retrofitting and renovation work after completion. By using electromagnetic magnet adhesion to attach the magnet plate on the door side to the main unit, it allows the normally closed fire door to be opened and held at any time. Although it is continuously powered, the magnet can be manually pulled away, allowing the door to be closed at will. The adhesion force is approximately 13kg to 15kg, making it easy to operate with light force. Additionally, if a one-shot off push button switch is installed separately, it can be conveniently operated remotely and is effective in preventing door warping. With a separately sold power supply (control panel), it can interlock and control heat and smoke detectors, signal lines, 100V power supply, and the automatic closing of door closers. In the event of a fire, the power supply, upon receiving a fire alarm signal, will become de-energized, releasing the electromagnetic magnet adhesion of the "Magnet Door Holder," allowing the door to close fully through the automatic closing mechanism of the door closer. Once the power supply is restored, it can return to its normal operating state.
ID badge case with strap and clip for clean rooms
When using name tags or name cards in a clean room, a clean room card holder should be used. This product features a PVC sheet with anti-static properties. It comes with an anti-static strap (for neck use) or an anti-static clip, making it easy to use. The card holder is marked with the "ESD Electrostatic Discharge Prevention Mark," clearly distinguishing it from general products. Therefore, it allows for thorough quality control, ensuring safe use within the clean room.
Keys also dress up stylishly!!
How about stylish key accessories to match your dressed-up beloved car? Choose from your favorite colors: red or blue! *This product is limited in quantity. Get it soon!
Balcony railing clothes drying hardware
Available for use in two stages parallel to 45 degrees.
Highly cost-effective drying hardware.
A smarter shape than conventional products. You can perform three operations—horizontal, diagonal, and storage—simultaneously to the left and right while holding the rod.
This is a high-quality type of metal accessory hardware that has a heavy and luxurious feel. It is ideal for restaurants and high-end apartments.
The colors are black and chrome. There are single-row type, double-row type, and shelf type available.
We introduce iron and stainless steel fuse holders, as well as rod-shaped and plate-shaped fuses.
Fukagawa Co., Ltd. handles "damper parts." We offer a lineup that includes "long (for round dampers with a diameter of 225mm or more and for square dampers)" and "short (for round dampers with a diameter of 100mm to 200mm)" fuse holders, as well as "rod-type fuses" and "plate-type fuses." Please choose according to the damper you are using. 【Lineup】 ■ Fuse Holders ・Long (for round dampers with a diameter of 225mm or more and for square dampers) ・Short (for round dampers with a diameter of 100mm to 200mm) ■ Fuses ・Rod-type fuses ・Plate-type fuses *For more details, please refer to the PDF document or feel free to contact us.
You can install up to 2 units of most mobile phones, smartphones, PDAs, etc.!
You can install two devices, including large ones like the BlackBerry Bold, iPhone, HT-03A, X01SC, as well as T-01A / X02T (TG01), and most mobile phones, smartphones, and PDAs! The arm part is movable, allowing you to adjust it to your preferred position and angle! It can even be positioned horizontally. The opening width is 4 to 10 cm. The bottom of the holder is designed to allow communication and charging cables to pass through. The suction cup has a strong adhesion mechanism, so it sticks firmly. However, it can be easily removed when you need to take it off, so you can rest assured. If you have two mobile phones, a mobile phone and a music player, or a mobile phone and a small portable navigation device, please give it a try!
It will be used set in the outer frame.
The brush is easier to use for scrubbing.
A strap to temporarily hang removed safety gloves around the waist to prevent loss.
You can eliminate the loss of equipment and improve work efficiency.
Digital microscope dedicated strap holder. Common and dedicated for wireless digital microscopes, wired microscopes, and Wi-Fi connected digital microscopes.
This is a dedicated strap holder for the Anyty series digital microscope. It can be used with WIFI microscopes, 2.4GHz wireless microscopes, and wired microscopes. Have you ever almost dropped your microscope because your hand slipped while observing? Especially during long observation sessions, you may feel uneasy about having to keep a tight grip on it. In such cases, this strap holder is very convenient. Even if the microscope body accidentally slips from your hand, there is no risk of it falling to the ground and getting scratched or damaged.
New product. A friend for machine maintenance. Can be operated with one hand while the jet gun is fixed in place. The angle of use can be freely adjusted.
The jet gun can be easily operated with one hand while fixed in place, and the angle of use can be freely adjusted, making oiling tasks easier. A 1-meter long jet hose is included, allowing you to oil multiple locations within reach.
Perfect for any size groove! Universal design drain cap holder.
The "Drain Cap Holder," born from the voices of waterproof construction shops and contractors, is a cap for vertical and horizontal drains. It comes in two colors: shining gray and dark gray. The design and engineering are by a famous designer. Made of high-quality ABS resin, it has a distinctive shine. 【Recommended Features】 ○ Fits perfectly in any size groove, universal design ○ Luxurious glossy finish with high-quality ABS resin ○ Perfect for Tomato Industrial Co., Ltd. drains ○ Adjustable angle, no need for replacement even in small grooves For more details, please contact us or download the catalog.
It can be used for flower beds, gardening, soil retention, garden partitions, lattice fences, and more!
The U-shaped holder for single pipes is a product designed to facilitate the easy construction of flower beds, fences, and retaining walls. By setting the holder on a single pipe fixed to the ground and inserting boards into the U-shaped part, you can easily create fences or flower beds. The height of the fence can be freely adjusted by stacking the holders. There are three sizes available: 35 for lattice fences, 40 for 2x4s, and 55 for retaining boards and garden panels, allowing for the use of various sizes of boards. By using a round holder, you can create movable parts such as height adjustments and doors, enabling the construction of various structures depending on the combination. When fixing the single pipe to the ground, using a single pipe base will ensure a secure attachment.
Made with high-quality genuine leather! It is strong and durable, resistant to shocks, and can be used for a long time.
We would like to introduce our "High-Quality NFC Keychain with Genuine Leather." Inside the keychain, it features an NTAG213 molded with PVC, making it strong and durable against impacts, allowing for long-term use. Various customizations are available, including shape, printing, embossing, branding, and foil stamping. You can also choose from multiple sizes and colors for the stitching and ring, and it is compatible with ball chains and strap types. 【Features】 ■ Made with high-quality genuine leather ■ Equipped with NTAG213 IC ■ Numerous design options and features available ■ Data encoding services are also available *For more details, please refer to the related links or feel free to contact us.
Dramatically improve the difficult task of film wrapping! Easily wrap with a long handle.
The "Nelson Wrap Stretch Film Holder" allows you to securely apply tension and wrap film with its unique brake mechanism. For tall packages or film work at low positions, the long handle reduces strain on your arms and back. Made of aluminum, the handle is lightweight and easy to maneuver. Additionally, the special bearings enable smooth rotation of the film. 【Features】 ■ Dramatically improves the difficult task of wrapping film in awkward positions ■ Easily wrap tall packages without raising your arms ■ Equipped with a brake function to apply firm tension at all four corners of the package ■ High-durability aluminum handle ■ Smooth film rotation due to special bearings *For more details, please refer to the PDF document or feel free to contact us.
You can easily secure the paper by simply inserting it into the holder pipe. It's also easy to remove!
The "Paper Holder" can securely hold posters and similar items simply by inserting them, and can be easily removed by lifting it up. Additionally, it is possible to attach multiple posters and replace only a portion of them. To accommodate various uses, such as direct wall mounting, ceiling hanging, or connecting with joints for three-dimensional use, we offer a lineup of four series. It is commonly used in places like banks and car dealerships. 【Features】 ■ Short delivery time Since we keep stock in-house, we can ship immediately after receiving an order. ■ Custom dimensions available We accept orders for custom sizes.
A wide variety of anchors for plasterboard and convenient goods utilizing magnetic force are available!
Dandori Vis produces and sells approximately 1,700 types of products, including woodworking screws, screws for wood decks, screw caps, "Don't Fall" anchors for drywall (Kabe Pita), and OEM products. As "convenience goods," we offer a lineup that includes "Kabe Pita 30 & Mini," and "Gacchiri Hook," which allow hooks and handles to be attached perfectly to the surface of drywall. We also provide "Don't Fall," which prevents screws from falling off the driver with a powerful magnet, and "Magnet Belt III," which keeps screws and nails at hand using magnetic force. 【Product Lineup】 ■ Kabe Pita 30 ■ Kabe Pita Mini ■ Gacchiri Hook ■ Don't Fall ■ Magnet Belt III *For more details, please refer to the PDF materials or feel free to contact us.
A lineup of metal keychains that focus on quality! Custom shapes can also be produced.
We will produce "original keychains" for the promotion. We offer a lineup of metal keychains that focus on quality. By applying an emblem with a dome seal, it can be finished as a high-end keychain. Additionally, we have various types of keychains available, and we can also create custom-shaped keychains for our customers. [Types] ■ Triple keychain ■ Rectangular keychain ■ Round keychain ■ T-shirt shaped keychain ■ Snap hook type keychain ■ Carabiner keychain *For more details, please refer to the PDF document or feel free to contact us.
We also manufacture and sell original holders and other products tailored to our customers' requests.
We would like to introduce our registered utility model, the "Dedicated Holder for Medical Waste Containers." It features a rotary damper that allows the lid to close slowly, addressing air infection and noise concerns. The holder is marked with a biohazard symbol, making it easy to identify. The color of the mark can be chosen from yellow, red, or orange. 【Features】 - Air infection prevention with a rotary damper - Biohazard symbol displayed on the holder - Lockable in an open position with pedal operation - Optional additional lid holder available depending on the model - Can be equipped with 2-wheel or 4-wheel casters and a handle For more details, please contact us or download the catalog.
A super low-profile medical waste holder with a built-in rotary damper that closes slowly.
The "Ultra Low Profile Medical Waste Holder" takes up minimal height even when the lid is open, making it suitable for use in narrow spaces. It is ideal for under blood collection desks, under treatment room tables, and areas where the lid may hit a surface. 【Features】 ○ Built-in rotary damper ○ Flat and large pedal → Allows the lid to be opened from any direction ○ Easy lid opening and closing without using hands → The lid closes slowly, preventing splatter and reducing the risk of infection, providing peace of mind ○ Registered utility model For more details, please contact us or download the catalog.
Barrier-free for wheelchair users! Both hands are free for smooth serving and movement.
The "Wheelchair Buffet Tray Holder" is a product that allows customers in wheelchairs to enjoy a buffet without assistance. By attaching it to the wheelchair, there is no need to move while holding a tray, enabling wheelchair users to enjoy the buffet comfortably. 【Features】 ■ Easy installation in three simple steps ■ Convenient design that stands on the floor ■ Can be attached and detached while seated in the wheelchair *For more details, please refer to the PDF document or feel free to contact us.
