Last Updated： Aggregation Period:Jun 17, 2026～Jul 14, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Jun 17, 2026～Jul 14, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Jun 17, 2026～Jul 14, 2026
This ranking is based on the number of page views on our site.
1～30 item / All 307 items
200 sheets of small and medium-sized paper towels will fit.
A high-sense paper towel holder with a contrast between the texture of stainless steel and the side color. ● Holds 200 paper towels. ● Comes with double-sided tape and screws. Depending on the wall material, it may be difficult to adhere with double-sided tape alone.
The battery cannot be easily removed, eliminating concerns about poor contact.
Once the battery is installed, it is securely attached and will not easily come off, eliminating concerns about poor contact. There are two types: through-hole pin type and surface mount type. The terminal part has a gold-plated finish with nickel plating on stainless steel, allowing for the flow of weak currents. When removing or attaching the battery, simply press the central tab lightly with a finger or pen tip to easily detach the battery. For more details, please download the catalog.
Automation of deburring! 10mm expandable deburring tool holder.
"BARRIQUAN" is a tool holder for deburring, equipped with a floating mechanism that extends and contracts at the tip. It can be used for deburring die-cast and cast products. ■□■ Full model change in April 2022! ■□■ With a maximum extension of 10mm, it allows the tool to align with the workpiece, preventing leftover burrs and excessive wear on the workpiece. It can accommodate various tools on the market due to its φ6 collet. 【Features】 ■ Consolidation of deburring processes, increased efficiency, and automation ■ Simple programming for deburring ■ Uniform burr removal through floating processing (tool aligning with the workpiece) ■ Easy exchange function 【NEW!】 - One-touch exchange of the floater allows tool replacement in 3 seconds during optimal condition setup - Spring replacement possible without disassembly tools ■ Supports high-speed rotation of 12,000 min-1 【NEW!】 For more details, please refer to the catalog or feel free to contact us.
It is possible to reduce initial costs through short-term construction.
TECON is a specialized manufacturer of membrane gas holders. TECON membrane gas holders are designed to comply with strict EU technical standards (various directives). The polyester woven fabric coated with PVC, which is the material of the membrane, has excellent strength and weather resistance, and the optimal membrane specifications are selected based on load calculations. - Ground-mounted double membrane gas holders - Top-mounted double membrane gas holders - Steel tank suspended gas holders - Single membrane gas bags *For more details, please download the PDF or contact us.
Applicable for high-purity monitoring on liquid and gas transfer lines and gas sampling for environmental assessment.
The Sabirex multi-layer filter holder is designed to accommodate multiple PTFE membranes (sold separately) within its body, and is used for high-purity monitoring and sampling of impurities in fluids, such as microparticles in liquid and gas transfer lines, as well as gas sampling for environmental assessment. There are 2-layer, 3-layer, and 4-layer filter holders corresponding to 47mm membranes, and all fluid contact parts, except for the PTFE membranes, are molded from PFA. It is effective for sampling that requires stricter collection than single-layer filter holders.
Drum pump nozzle storage available for drum cans.
**Merits** ● No trouble finding a place for the gun nozzle ● No scratches on the nozzle ● No dirt on the drum or floor **Features** ● Easy installation with a hex wrench ● Compatible with manual nozzles to auto-stop nozzles *Note: Thick gun nozzles like ATPS-10 are not compatible* ● Simply hook it on the edge of the drum's top ● Size (Length/Width/Height) 73.2×51×70 (mm) ● Material: SUS
![[Data] Standard tooling for DMG Mori NL1500](https://image.www.ipros.com/public/product/image/d32/2000445096/IPROS56315985090746622870.jpeg?w=280&h=280)
Improving processing efficiency of CNC composite lathes! Featuring customer testimonials and lineup.
This document is a catalog summarizing the main high-tech tool holders for the DMG Mori Seiki "NL/NLX1500." High-quality and high-rigidity tool holders enhance machining efficiency and improve machining accuracy on CNC multi-tasking lathes. It includes testimonials from customers who have adopted high-tech tool holders and features the tool holder lineup for the DMG Mori Seiki NL/NLX1500-4000. [Contents (excerpt)] ■ We asked high-tech users! ■ Features of the bearings ■ Standard holder lineup for NL/NLX1500 (1) ■ Standard holder lineup for NL/NLX1500 (2) ■ Standard holder lineup for NL/NLX1500 (3), etc. *For more details, please refer to the PDF document or feel free to contact us.
Easily and quickly manageable! Contributes to improving setup and tool change times for lathes and machining centers.
We handle the Heimatec CNC lathe tool holder "Heimatec Capt" at our company. The "Heimatec Capt" contributes to improving setup and tool change times for lathes and machining centers. By using this product, you can install not only standard tools of the Capt system but also a wide variety of special tools designed for machine optimization. 【Features】 ■ Easy and quick to handle ■ High precision and versatility ■ Compatible with a wide range of attachments ■ Reduces setup time ■ Supports internal lubrication *For more details, please refer to the PDF document or feel free to contact us.
Maximize the capabilities of your machine! A tool holder developed for Shinkom machine users.
We handle the "Tool Holder" manufactured by Heimatec, developed for Shinkom machine users. Since the dimensions are the same as the standard holders for each model of lathe, no modifications to the machine are necessary for installation. You can easily install and experience the holders made by Heimatec, a manufacturer specializing in tool holders. 【Features】 ■ Lineup will be gradually expanded ■ Maximizes the machine's capabilities ■ Special specifications will also be addressed gradually ■ A wide range of accessories such as nuts and wrenches are available *For more details, please refer to the PDF document or feel free to contact us.
Just tighten one fixing screw! Noise filter installation auxiliary bracket.
The "DH Holder (DIN Rail Compatible Noise Filter Mounting Base)" is a product manufactured by Shinohara Electric that can be mounted on a DIN rail and used as an auxiliary mounting bracket for noise filters. By simply tightening one fixing screw, it can be secured at any position on the DIN rail, eliminating the need for direct attachment to the back panel. The mounting screws are flat-head screws, ensuring a flat mounting surface. To facilitate easy installation of noise filters, it is pre-tapped. Additionally, it can also accommodate Shinohara's push button mounting bases (PBK series). 【Features】 ■ Can be secured at any position on the DIN rail ■ No need for direct attachment to the back panel ■ Uses flat-head screws for mounting ■ Pre-tapped for easy installation ■ Compatible with Shinohara's push button mounting bases (PBK series) *For more details, please refer to the PDF document or feel free to contact us.
Excellent insulation properties and lightweight! It supports and fully protects wires of all sizes.
【Features】 1. By tightening with a cable tie, wires can be easily and securely held. 2. We offer three types with different heights, allowing you to use them according to your needs. 3. Excellent insulation properties and lightweight. *For more details, please refer to the PDF document or feel free to contact us.
Made of polypropylene and lightweight! Please use it for supporting low-pressure copper bands.
The "Bar Holder X (Insulated Support for Low-Pressure Copper Strips)" is a product that supports copper strips without drilling holes by sandwiching them from above and below. It features a groove surface of 20mm width that intersects with a groove surface of 11mm width at a right angle, allowing for two different usage methods. Additionally, it can support copper strips with a thickness ranging from 10mm to 20mm, and it is also possible to install two 6mm strips. The width of the copper strip that can be supported ranges from 50mm to 125mm, and for supporting strips wider than 75mm, insulated bolts are available. 【Features】 - Can be used without drilling holes for supporting copper strips - Supports by sandwiching from above and below - Allows for two different usage methods - Can support copper strips with a thickness of 10mm to 20mm - Can support copper strips with a width of 50mm to 125mm - Insulated bolts are included for supporting strips wider than 75mm *For more details, please refer to the PDF document or feel free to contact us.
The lid can be opened with a foot pedal, making it clean, safe, and easy even when your hands are occupied.
The foot-operated pedal holder for medical waste containers allows the lid to be opened with a foot pedal, making it clean, safe, and easy to use even when both hands are occupied. The lid can be opened and closed without directly touching the container, and there are dedicated holders for each type. Examples of products include holders for BH-E40K, K#50, and a lid-fixing type holder for Medical Carton A-style 40. Additionally, there are multifunctional holders for medical waste containers. The lid can be opened and closed without direct contact with the container, and when replacing the container, the lid can be removed from the holder without touching the dirty underside of the lid. It can be closed quietly, and the three-point fastening ensures that the lid is securely held in place. For installations against walls, there is a holder for E50 and K#50 that includes a protective feature to prevent wall damage. For more details, please contact us.
【i-TOOL Brooch Holder】 Enables hexagonal hole processing on lathes and machining centers!
This is the i-TOOL broach holder capable of hex hole machining with lathes and machining centers. It can be easily attached to existing machine tools, making it a must-see for those currently outsourcing hex hole machining! There are two types available: one for lathes and one for machining centers. Since the insert is made of carbide, it can operate at about twice the speed compared to high-speed steel, reducing machining time. The holder is equipped with bearings, allowing the cutting edge to rotate along with the workpiece when in contact, enabling hex hole machining while rotating. It offers high precision and can perform machining in a short time, making it suitable for small-batch production of various types. For those considering implementation, we also have demo units available. For more details, please refer to the PDF materials or feel free to contact us.
![[Case Study 005] Development of a lens cover holder that can be installed in one minute.](https://image.www.ipros.com/public/product/image/fa9/2000393859/IPROS7255209437579865628.jpg?w=280&h=280)
Quick response capability and reliable technology! Delivered countermeasures in just 3 weeks after 2 prototype iterations.
We will introduce a development case of "Wire Forming" developed by Advanex. An incident occurred where the resin lens cover of a new lighting device for medical institutions, which uses halogen lamps, fell due to the fasteners loosening from heat. It was nearly impossible to recall and repair the affected product, so it was essential that the customer's sales representative could easily perform the repairs themselves. The technical staff quickly created a handmade prototype based on years of experience. During the second meeting with the customer, they improved the identified issues and presented a prototype processed by a mass production machine. A week later, the countermeasure product was delivered. [Case Study] ■ Challenges - The customer's sales representative must be able to easily perform repairs. - No processing such as drilling holes should be required. - Costs also needed to be kept to a minimum. ■ Industry: Medical device manufacturer ■ Technology/Method: Multi-forming ■ Delivery Time: 3 weeks after development request ■ Final Product: Lens cover holder *For more details, please refer to the PDF document or feel free to contact us.
Height and angle adjustable! Compatible with all installation conditions!
The Universal Holder HTR-UNI series is a holder designed to attach pads or spring plungers to round tubes, square tubes, and grooved frames. The height and angle of the pads can be adjusted, allowing for a flexible suction system design for workpieces such as thin steel plate components with curved surfaces. For more details, please contact us or refer to the catalog.
Reduce the workload of stretch film wrapping! Say goodbye to back and knee pain!
This is a holder that makes the wrapping work with stretch film easier. It allows for easy wrapping of tall packages, and there is no need to bend your knees or back for lower packages. It can be safely wrapped while being lifted by a forklift. The film can be easily secured or removed using a screw mechanism. It is made from sturdy aluminum alloy and reinforced fiber plastic, achieving both lightweight and durability. ■Benefits 1. Can wrap at high places 2. Can wrap at low places while standing 3. Easy to remove the wrap
Providing optimal solutions for the arrangement of oscilloscope probes, near-field magnetic and electric field probes for spectrum analyzers, antennas, and more.
To achieve the desired measurements, various innovations may be necessary. In particular, it is essential to position the oscilloscope probes, near-field magnetic and electric field probes of the spectrum analyzer, and antennas in the appropriate direction and location. For this purpose, the universal probe holder eoPoD provides an optimal solution regardless of environmental conditions. Various applications are explained in the video below.
Both the radio and smartphone are securely fixed. A MagSafe-compatible 360° rotating magnetic holder that can be easily attached and detached with one hand.
●CH10 (CH10) is a magnet holder from the MUSEN mall brand. ●It is a holder that securely fixes radios and smartphones. By attaching the included metal plate to devices like radios, you can easily mount various equipment. ●It features a 360° rotating ball joint, allowing you to freely adjust to your preferred angle. It can be comfortably used in a variety of settings, including inside a car, at a desk, or in a workspace. ●With a powerful magnet that securely holds the device, it can be used stably even in environments with vibrations or during driving. ●It can be attached and detached with one touch, making it smooth to remove radios or smartphones. It can be easily installed without the need for tools. ●For iPhone 12 and later models that support MagSafe, it can be attached directly with the magnet. Even for models that do not support MagSafe, it can be used by attaching the included metal plate. ●It is useful for a wide range of applications, including using navigation apps on smartphones, operating business applications, and installing radios. *For more details, please feel free to contact us.
エアレス塗装機に設置して移動楽々！ 作業負担を軽減！！
簡単に設置できて安心・安全！！ そして安価！！！ ●作業中は塗料缶が固定されているので安心♪ ●移動時はそのまま取っ手を引いて安全♪
By attaching the "PC holder," it becomes possible to mount resin panels (polycarbonate, acrylic, PET resin) to the mesh panel.
Fix the polycarbonate sheet (resin panels such as acrylic) from the inside to the ST30 or ST20 mesh panel. As the panel size of the safety fence increases, more holders will be needed to secure the sheet.
This is an inexpensive thermometer holder for physical and chemical use. It is made of glass and comes in various fittings.
■The standard product is for a 6φ thermometer. (T-1) ■There is also a version for an 8φ thermometer. (T-2) ■Main body... Pyrex Cap... Melamine resin Packing... Teflon/Silicone
A keychain that is perfect for preventing slipping on an umbrella handle.
This is a Daisuki Paper Craft original product. We have a rich lineup available.
Introducing a transparent plastic board drawing storage pocket using high-performance adhesive tape!
We would like to introduce our "Plastic Drawing Holder DHP." It uses high-performance adhesive tape and is available in "Standard Type" and "Flame Retardant Type." You can store drawings and specifications for distribution boards inside the holder and retrieve them as needed. 【Product Lineup】 <Standard Type> ■DHP-A4 ■DHP-A5 ■DHP-A6 <Flame Retardant Type> ■DHP-A4 V2 ■DHP-A7 V2 *For more details, please refer to the PDF document or feel free to contact us.
The name paper is held in place at the base, so it won't fall out when you open the cover!
This product is a nameplate for adhesive-type distribution board circuits, etc. It uses strong adhesive tape, so there is no need for drilling holes, and the card is sealed, preventing it from getting dirty or falling off. Additionally, the polyethylene foam tape is thick and excels in initial adhesion. 【Features】 ■ RoHS compliant ■ The cover is made of AS resin, providing good transparency ■ Comes with name paper, and printing from a computer is possible using a separately sold dedicated name sheet ■ The non-woven double-sided tape does not leave adhesive residue on the surface when removed * Reapplication is not possible ■ The polyethylene foam tape is thick and excels in initial adhesion * For more details, please refer to the PDF document or feel free to contact us.
A hinge-type locking mechanism that prevents the cover from falling! It won't open on its own!
This product is a vertical-opening hinge-type card holder with an integrated cover and base. Thanks to the hinge lock mechanism that prevents the cover from falling off, it will not open on its own. Additionally, there is a dedicated name paper ISY-5 (sold separately) that can be printed using a computer. 【Features】 ■ RoHS compliant ■ Hinge lock mechanism prevents the cover from falling off and ensures it does not open on its own ■ Non-woven double-sided tape leaves no adhesive residue on the surface when removed (reapplication is not possible) ■ The polyethylene foam tape is thick and excellent for initial adhesion ■ There is also a dedicated name paper ISY-5 (sold separately) that can be printed using a computer *For more details, please refer to the PDF document or feel free to contact us.
For deburring and chamfering of complex machined surfaces! Capable of uniform and smooth processing with support for both front and back burrs! Suitable for automatic machines such as machining centers and NC milling machines.
We would like to introduce our deburring holder for MRA automatic machines, "Debarin MC." It features a built-in tension adjustment mechanism that expands and contracts by 10mm, allowing for processing of complex-shaped workpieces while keeping the tool aligned at a constant pressure. It comes with three standard types of springs and two types of pro-lead colors, which can be exchanged to adjust according to the work material and the amount of deburring required. This product can be used with the MC machines you have. 【Features】 ■ Uniform and smooth deburring and chamfering finish ■ Compatible with both front and back burrs ■ Capable of processing complex-shaped surfaces ■ High efficiency with a maximum rotational speed of 15,000 min-1 ■ Adjustable by exchanging accessories according to work material and deburring amount *For more details, please refer to the PDF document or feel free to contact us.
【Harness-type safety belt optional parts】Secure the rope by bundling it and fixing the hook when not in use!
The "R-26-45" is a lanyard holder for harness-type safety belts. When not in use, the rope can be bundled to avoid getting in the way, and the hook can be hung. *Some types come standard with this feature. *For more details, please refer to the catalog. Feel free to contact us with any inquiries.
