Fittings(sus) - List of Manufacturers, Suppliers, Companies and Products | IPROS

Last Updated： Aggregation Period:Feb 18, 2026～Mar 17, 2026
This ranking is based on the number of page views on our site.

Fittings Product List

61～90 item / All 125 items

Displayed results
Straight cylindrical rubber flexible tube "L-FLEX"

Straight cylindrical rubber flexible tube "L-FLEX"

It is a very simple structure without an arch design. The steel wires inserted in a spiral manner inside provide high pressure resistance and cross-sectional area retention capability.

"L-FLEX" is a flexible rubber pipe in a straight tubular shape handled by Chūnichi Giken Kōgyō Co., Ltd. It absorbs displacements caused by earthquakes and uneven settling. 【Standard Specifications】 ■ Maximum Operating Pressure: If the usage exceeds the maximum operating pressure (1.0MPa), please contact us for a separate structural review. ■ Maximum Operating Temperature: -10℃ to 60℃ ■ Installation Conditions: When installing for burial, please ensure the burial depth is between 1M and 3M. Additionally, the maximum vehicle weight should be below 25 tons. ■ If the fluid is a gas, the maximum operating pressure will change, so please contact us. ■ For regulating axial thrust generated by internal pressure and preventing excessive displacement, please use a control unit (tie rod bolt type). Also, for adjusting the spacing dimensions during installation, please use a control unit (set bolt type). (1) It cannot be used in areas such as the delivery side of pressurized water pumps where pressure fluctuations occur frequently. (2) It cannot be used with fluids or installation locations that may deteriorate the elasticity of the rubber. *For more details, please refer to the PDF document or feel free to contact us.

  • others
  • Fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Special Products] Manufacturing of fittings with special shapes

[Special Products] Manufacturing of fittings with special shapes

At Benkan Kiko, we are capable of manufacturing various shapes of special products thanks to our long-established expertise in joint manufacturing. This time, we would like to introduce one such example.

The Y pipe in the photo is a special shape with a size of 4B, featuring a 30° (R300) elbow with a 1B short pipe welded to the back side. Since SUS430 is in sheet form, both the elbow and the short pipe are manufactured by forming pipes from the sheet. After shaping, the inner surface is polished to achieve a very smooth finish. Type: Special Y pipe Dimensions: 4B x 1B Wall thickness: 3.0T Material: SUS430 This product is used in metal powder processing equipment and has received high praise from our customers. In addition to the above, we are engaged in the production of various types and shapes of products, with many successful deliveries. "If only we could make such a joint?" "It would be great to have a joint like this." If you have such requests, please feel free to consult with us.

  • Prefab
  • others
  • Fittings
  • Fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
45-degree street elbow

45-degree street elbow

We have developed a product that has received many inquiries from customers.

We have developed a product that has been highly requested by our customers. We have sizes ranging from 8A to 50A in stock. 【Features】 ■ SUS304 (SCS13A) low-pressure screw fittings ■ Sizes: 8A to 50A *For more details, please refer to the PDF document or feel free to contact us.

  • Fittings
  • Fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Two-phase stainless steel fitting 'FS/FB'

Two-phase stainless steel fitting 'FS/FB'

Welding helmets and blind helmets 20A, 25A, and 40A are in stock and available for immediate delivery!

Duplex stainless steel is a material composed of austenitic and ferritic phases, possessing excellent corrosion resistance and strength characteristics. It excels in pitting resistance and crevice corrosion resistance in chloride environments, and it has superior localized corrosion resistance compared to SUS316L, making it suitable for use in chemical plants and seawater equipment.

  • Piping Equipment
  • Fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Mechanical pipe joint "Strub Grip Type 316"

Mechanical pipe joint "Strub Grip Type 316"

Achieve lightweight and low cost! Mechanical pipe fittings with higher durability than SUS 316!

The "Strub Grip 316 Type" is a mechanical pipe joint that achieves lightweight and low cost by adopting a U-bar structure. Furthermore, the main body is made of SUS316, which is resistant to rust and corrosion, ensuring sufficient durability. Thanks to its unique anti-pipe removal structure, there is no need for secondary processing such as threading or grooving, allowing for a reduction in processing costs and a shortening of work time. It also features a function to prevent forgetting to tighten, allowing for visual confirmation of torque values after installation. 【Features】 ■ High corrosion resistance and low cost ■ Lightweight and compact design ■ No need for pipe processing ■ Adoption of U-bar structure *For more details, please refer to the catalog or feel free to contact us.

  • Fittings
  • Piping materials (copper pipes, cast iron pipes)
  • Fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
German-made fittings "AVS Fitting Comprehensive Catalog" *Sample available

German-made fittings "AVS Fitting Comprehensive Catalog" *Sample available

Selectable according to the properties of the fluid, usage temperature, shape, size, and other needs. A catalog that clearly presents product features and sample gifts are available!

This catalog clearly introduces the features and specifications of the high-quality fitting products "AVS Fittings" manufactured by the German company AVS Romer. You can choose from one-touch (push-in) types and ferrule types according to your application. The one-touch type offers over 30 different shapes, and materials such as PVDF, which has excellent chemical resistance; PPSU, which is tough and has excellent heat resistance; POM, which has high mechanical properties and oil resistance; and SUS316L, which has excellent corrosion resistance. There is also a wide range of auxiliary functional products, such as filters and valves that incorporate fittings. [Contents (excerpt)] ■ About AVS products ■ Introduction of product structure/materials ■ Introduction of fitting product specifications ■ Introduction of specifications for filters, valves, and coupling products *The catalog can be viewed via "PDF Download." Please feel free to contact us with any inquiries.

  • Fittings
  • Fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Strengthening the delivery of large-diameter welded pipe fittings

Strengthening the delivery of large-diameter welded pipe fittings

We have established a system that allows for short delivery times of large-diameter welded pipe fittings for customers in the western Japan area.

In a wide range of fields such as shipbuilding, plant equipment, and air conditioning systems, large diameter welded pipe fittings are adopted, with sizes ranging from 16B to 20B (400A to 500A) for FSGP (JIS B 2311) and from 14B to 24B (350A to 600A) for stainless steel (JIS B 2313). We have now stocked large diameter items at our Amagasaki warehouse (Fuso-cho, Amagasaki City, Hyogo Prefecture). 【Items available in large diameter stock】 Type: Elbow (Long/Short) Material: FSGP (JIS B 2311), SUS304W (JIS B 2313) Thickness: 4.0T/5.0T/6.0T/S10S/S20S *Compatible with SUS304 - For customers west of Okayama, we can achieve next-day delivery for orders placed by 2 PM. - We can accommodate pickups for customers in the Kansai region (products can be picked up at the Benkan Kiko factory). - Regular deliveries to the Osaka area are available (we operate daily regular services from the Amagasaki warehouse to Osaka City). For more details such as quotes, please use the contact form below or contact us directly. We also maintain a constant stock of small diameter items. *1/2B-14B (15A-350A)

  • Fittings
  • Fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Stainless steel piping fitting "R fitting"

Stainless steel piping fitting "R fitting"

Special price and same-day shipping campaign underway! Low prices and a wide variety of stainless steel piping fittings. Feel free to request a quote first!

Low-cost, high-quality stainless steel piping fittings. Using lost-wax casting and pipe processing methods, we have reduced waste and achieved low costs. Sizes range from 1/8" to 4", primarily featuring pipe taper threads (JIS B 0203) in our lineup. CAD data can be downloaded by model type from our company website.

  • Piping materials (copper pipes, cast iron pipes)
  • Fittings
  • Fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Teflon flexible joint "Convoluted Hose"

Teflon flexible joint "Convoluted Hose"

A hose that allows for space-saving piping design and is ideal for mechanical operation piping.

The "Convoluted Hose" is a flexible hose that excels in bending characteristics, allowing for the construction of curved lines, unlike straight hoses. Additionally, like straight hoses, it provides a clean usage environment while also being excellent in durability and pressure resistance. It enables space-saving piping design and is ideal for mechanical operating piping. 【Features】 ■ Excellent bending characteristics ■ Space-saving piping design possible ■ Superior durability and pressure resistance ■ Ideal for mechanical operating piping ■ Standard fitting material is SUS304 *For more details, please contact us or download the catalog.

  • Sanitary fixtures
  • Fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Housing pipe fitting UGF

Housing pipe fitting UGF

It is a high-quality product with a unique structure that does not damage the gasket and is easy to recycle.

UGF is a groundbreaking housing pipe fitting that does not damage gaskets. Made from easily recyclable stainless steel, it can be easily installed by plumbing contractors. The unique structure of the fitting, leveraging the technical expertise of Nagashima Manufacturing, ensures safe and reliable piping without damaging the housing gaskets, unlike conventional products. 【Features】 - Unique structure that does not damage gaskets - Reduces work processes and lowers costs - Easily recyclable and high-quality product - Compatible with group types - Easy installation for anyone - Recommended materials for hot water use are SUS315J1 and J2 For more details, please contact us or refer to the catalog.

  • Piping and electrical wiring materials
  • Fittings
  • Fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Extra Thick Gold Fold - One-Character Joint (Stainless Steel) | NEW HIKARI

Extra Thick Gold Fold - One-Character Joint (Stainless Steel) | NEW HIKARI

The design makes it easy to accommodate power cords and similar items! The elongated holes provide excellent workability for screws and bolts.

NEW HIKARI is the original brand of Shimizu Corporation. We offer a wide range of construction hardware, fittings, and equipment for professional craftsmen and specialized contractors. Our products have been cherished for many years due to their reliable quality. The "Extra Thick Metal Fold - One-Character Joint" (Stainless Steel) features elongated holes, making it an excellent product for installation with screws and bolts. The hole pitch is 25mm, making it easy to accommodate electrical wires and cables. Please feel free to contact us when you need assistance. 【Specifications】 ■ Material: Stainless Steel SUS-304 ■ Finish: Hairline ■ Screw Diameter: 5.5×10 Long Hole *For more details, please download the PDF or feel free to contact us.

  • 4905637058393.jpg
  • 4905637058218.jpg
  • 4905637058300.jpg
  • Fittings
  • Fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Benkan Kiko Ashigara Logistics Center

Benkan Kiko Ashigara Logistics Center

Inventory expansion! Major renovation before and after at the Ashigara Logistics Center!

Among the core logistics centers, the distance to each transportation company's terminal is close, and the transportation efficiency is outstanding. We have the following stock items, including carbon and stainless steel welded pipe fittings and stainless steel flanges. 【Stock Items】 - Elbows (long and short) - Tees (same diameter and different diameter) - Reducers (concentric and eccentric), etc. - Stainless steel flanges 【Materials and Types】 - FSGP (black pipe and white pipe) - PT370 (S40, S80, S160) - SUS304, 316, 316L, etc. - SOP-FF/RF - BL-FF/RF, etc.

  • Water Treatment
  • District heating and cooling/heat source system
  • Pipeline Construction
  • Fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
CK Sanetsu Co., Ltd. Company Profile

CK Sanetsu Co., Ltd. Company Profile

Expected, meeting expectations, and exceeding expectations. The CK brand is one of the most well-known brands in our country in the world of plumbing equipment.

CK Sanetsu Group Co., Ltd. manufactures "unassuming yet amazing" components and materials that support the lives and products of modern people behind the scenes. In addition to developing products that meet needs, we actively engage in research and development with consideration for the environment, consistently supplying products that "exceed expectations" with a forward-looking perspective on future society. CK Metal is a unique manufacturer that provides piping equipment that does not use environmentally harmful substances, taking into account the global environment. 【Business Activities】 ■ Piping Equipment Business ■ Plating Business ■ Copper Processing Business ■ Precision Parts Business *For more details, please refer to the PDF materials or feel free to contact us.

  • Piping materials (plastic pipes)
  • Piping materials (copper pipes, cast iron pipes)
  • Fittings
  • Fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Atoms Coupling "Mechanical Pipe Joint" "Repair Clamp"

Atoms Coupling "Mechanical Pipe Joint" "Repair Clamp"

Confident in strength and workability. Easy installation with just one torque wrench!

The Atoms coupling is a mechanical pipe joint that excels in strength and workability, allowing for safe use with piping such as SGP, SUS, and those with similar outer diameters, while also being labor-saving and cost-effective. 【Features】 ■ Can be installed with just one torque wrench ■ Easy on-site installation ■ Lighter than flange connections ■ No secondary processing of piping required ■ Prefabrication is possible ■ Reduces total costs ■ Can be installed in small spaces ■ Can absorb angular misalignment ■ Shortens installation time

  • Fittings
  • Water Supply Facilities
  • Sewerage facilities
  • Fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Teflon-lined synthetic rubber vibration isolation joint "TR Flex"

Teflon-lined synthetic rubber vibration isolation joint "TR Flex"

Outstanding pressure resistance! A joint that also excels in displacement absorption performance (eccentric and expansion absorption).

This product is a Teflon-lined synthetic rubber vibration isolator from the flexible joint (synthetic rubber vibration joint) series. In addition to excellent heat resistance and chemical resistance, it also boasts outstanding pressure resistance. It is suitable for vibration isolation and displacement absorption in various piping applications such as water supply, hot water, chemical solutions, ultra-pure water, oil, and pool water. 【Features】 ■ Teflon lining in the liquid contact area, covered with synthetic rubber ■ A versatile flexible joint with excellent heat and chemical resistance ■ Superior displacement absorption performance (eccentric and expansion absorption) ■ Outstanding pressure resistance *For more details, please refer to the PDF document or feel free to contact us.

  • Anti-vibration rubber
  • Fittings
  • Fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Product Catalog - Stainless Steel Fittings

Product Catalog - Stainless Steel Fittings

A rich lineup including SL1 type 90° elbows, ST1 type tees, and SU1 type unions!

This catalog is the Stainless Steel Fitting Catalog 2017, featuring pipe fittings "stainless steel joints" manufactured by Makizaki Co., Ltd. It introduces products such as the "SL1 type 90° elbow" made from SCS13 and SCS14 materials, as well as the "ST1 type tee," "SU1 type union," and the "SNH1 type hex nipple" made from SUS04. We hope this will be helpful in your product selection. [Contents] ■ Elbows ■ Tees ■ Unions ■ Nipples ■ Bushings, etc. *For more details, please download the PDF or feel free to contact us.

  • Piping materials (copper pipes, cast iron pipes)
  • Fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Bandless fitting for blade hoses "Nasufitter"

Bandless fitting for blade hoses "Nasufitter"

No need to install troublesome hose bands! A bandless coupler that connects simply by tightening the nut.

The "Nasufitter" is a bandless fitting for connecting blade hoses, such as food-grade PVC blade hoses. To connect, simply insert the hose into the nipple part of the fitting and tighten the tightening nut until it contacts the end of the fitting body. Moreover, the locking component connected to the tightening nut seals while strongly pressing against the outer surface of the hose, ensuring that if tightened securely, a higher level of locking and sealing performance is achieved. 【Features】 ■ Easy hose installation ■ Reliable locking and sealing performance ■ Easy connection to equipment when using a coupler ■ No need for troublesome hose clamps ■ Connection can be made simply by tightening the nut For more details, please refer to the catalog or feel free to contact us.

  • Piping Equipment
  • Fittings
  • Fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Synthetic rubber spherical vibration isolator "S-Flex"

Synthetic rubber spherical vibration isolator "S-Flex"

Excellent vibration damping performance! Spherical vibration isolation joints made of synthetic rubber that comply with the Ministry of Land, Infrastructure, Transport and Tourism specifications.

This product is a synthetic rubber spherical vibration isolator from the flexible joint (synthetic rubber vibration joint) series. Standard product comes with JIS 10K flange (SS400). It can be modified to fit various standard flanges such as JIS 5K, JIS 20K, water supply, ANSI, etc. A flat inner surface type is also available. 【Features】 ■ Excellent vibration isolation performance ■ Made of EPDM ■ Compliant with the Ministry of Land, Infrastructure, Transport and Tourism specifications ■ Compliant with the Air Conditioning and Sanitary Engineering Society standards ■ Uses rubber compliant with JIS K 6353 *For more details, please refer to the PDF document or feel free to contact us.

  • Anti-vibration rubber
  • Fittings
  • Fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Synthetic rubber 2-mountain vibration-damping joint "W Flex"

Synthetic rubber 2-mountain vibration-damping joint "W Flex"

Excellent vibration damping performance! Synthetic rubber 2-mountain vibration isolation joints suitable for air conditioning circulation pumps and similar applications.

This product is a synthetic rubber two-mountain vibration-damping joint from the flexible joint (synthetic rubber vibration-damping joint) series. The synthetic rubber is standard for JIS 10K flanges (SS400). It can also be modified for various standard flanges such as JIS 5K, JIS 20K, drinking water, and ANSI. 【Features】 ■ Excellent vibration-damping performance ■ Made of EPDM ■ Compliant with the Ministry of Land, Infrastructure, Transport and Tourism specifications ■ Compliant with the Air Conditioning and Sanitary Engineering Society standards ■ Uses rubber that meets JIS K 6353 *For more details, please refer to the PDF document or feel free to contact us.

  • Anti-vibration rubber
  • Fittings
  • Fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
SLJ Slab - For Port Piers

SLJ Slab - For Port Piers

Widely adopted for precast slabs of highway bridges that require fatigue durability under harsh conditions!

The "SLJ Slab - For Port Piers" improves the workability of the joint section compared to loop joints by using end band joints at the connection points of precast slabs. It is widely adopted for precast slabs of highway bridges that require fatigue durability under harsh conditions. Additionally, it allows for a reduction in slab thickness. 【Features】 - Applicable to the end face of post-tensioned two-way PC slabs - Allows for shorter joint lengths compared to overlapping joints - Joint length is 15 times the diameter of the rebar for both uncoated and epoxy-coated rebar - Compatible with rebar diameters D16, D19, and D22 - Also compatible with stainless steel rebar SUS304 *For more details, please refer to the PDF document or feel free to contact us.

  • others
  • Renovation and repair methods
  • Fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Smell-free cart

Smell-free cart

Solving one of the challenges in caregiving! We respond to staff motivation by improving the environment during diaper changes.

◆ Effective measures against labor shortages ◆ ◆ Integrated cart with deodorizing device ◆ ◆ Large two-tank for separate collection ◆ ◆ Deodorizing filter is easy to attach and detach ◆ ◆ Easy switching for operation and battery charging ◆ ◆ Easy to handle even for women ◆

  • Heating and cooling equipment and facilities
  • Fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
High Flow Energy-Saving Type Fitting 【SPE Type】

High Flow Energy-Saving Type Fitting 【SPE Type】

Energy-saving and cost-reducing piping fittings!!

Contributing to energy conservation in equipment for maximum effect with minimal energy. Smoothly accommodating piping for air, pure water, lubricants, etc. Dramatically improving work efficiency. ◎Features◎ The various plant fittings (Quick Coupling CSPE Series) have successfully achieved large flow rates through fluid analysis simulation, significantly enhancing flow performance. This realizes a reduction in fluid transfer time and contributes to increased productivity. ● Understanding the resistance generation situation of each component and implementing loss reduction measures. ● Newly designing components to achieve large flow rates. ● Improving the sealing method, successfully enhancing sealing performance (reducing damage) and dramatically increasing durability.

  • Piping and electrical wiring materials
  • Fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Flexible expansion joint "SKX Series for hot water" *Delivery case examples available

Flexible expansion joint "SKX Series for hot water" *Delivery case examples available

Maximum operating temperature 80℃. Smooth connection with existing pipes during repair and renovation of hot water piping. Installation is possible even in narrow spaces [Case study video now available].

The "SKX Series" flexible expansion joint with anti-disengagement features has added a "hot water use" option to its lineup. The maximum operating temperature is 80°C. The slide connection on the pipe allows for improved installation speed. Additionally, since it can connect with just one joint, it reduces material costs and improves piping arrangements. 【Features】 ■ It is possible to connect different types of pipes between existing and newly installed systems with just one joint. ■ Equipped with standard anti-disengagement fittings (stop rings) to prevent pipe disconnection, ensuring high safety. ■ No disassembly is required, and it can be connected with a short wrench, making installation possible even in tight spaces. You can download the "Case Study Collection for Hot Water and Heating Piping" and the "Case Study Collection for Building Equipment Piping," which include examples of solutions to on-site issues, from the PDF download. *For more details, please refer to the materials and videos. Feel free to contact us with any inquiries.

  • ‡@.jpg
  • ‡A.jpg
  • ‡B.jpg
  • ‡C.jpg
  • ‡D.jpg
  • ‡E.jpg
  • ‡F.jpg
  • ‡G.jpg
  • ‡H.jpg
  • Fittings
  • Fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Rotary Pipe Fitting "TB Niigata Swivel Joint"

Rotary Pipe Fitting "TB Niigata Swivel Joint"

[Free sample available] Compatible with fluids such as LNG and ammonia. Rotates 360° freely. Also offers seismic isolation piping systems.

The "TB Niigata Swivel Joint" is a rotating pipe fitting that allows for 360° free movement. By selecting the type of main body material and packing material according to your needs, it can handle difficult fluids such as working oil, industrial water, seawater, steam, natural gas, ammonia, and other chemical fluids. Additionally, we offer swivel joints specifically designed for sanitary piping and seismic isolation piping systems that utilize swivel joints. 【Features】 ■ Secure sealing from low pressure to high pressure with a dedicated special packing ■ Prevents the intrusion of debris and rainwater into the ball bearing section with a special lip shape ■ Maximum operating pressure is 34MPa ■ Custom designs are also available *For more details, please refer to the materials. Feel free to contact us as well.

  • Fittings
  • Fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Flexible Tube & Bellows Comprehensive Catalog Vol. 10

Flexible Tube & Bellows Comprehensive Catalog Vol. 10

Introducing flexible tubes made of SUS with a thickness of 0.2 mm using TIG welding! Friendly response to "Can you do this?" and prompt response to "That usual thing!"

Our company, Chūnichi Giken Kōgyō Co., Ltd., is a manufacturer of stainless steel flexible tubes. Our flexible tubes are characterized by their very thin structure, with a thickness ranging from 0.2mm to 0.6mm. Additionally, using our unique TIG welding technology, we not only produce flexible tubes but also fabricate stainless steel welded products. This catalog introduces the flexible tubes and bellows handled by Chūnichi Giken Kōgyō Co., Ltd. Starting with the screw-in joint flexible tube "CW-1000 with Union," we also feature other special shapes such as "CW-18000F Full Jacket Flexible" and optional items like "Fire-resistant Tubes," among a wide range of offerings. Please make use of this catalog for selecting flexible tubes and bellows. [Contents (excerpt)] ■ Features and roles of flexible tubes ■ Flexible tube connection joints ■ Types of flexible tubes ■ Screw-in joint flexible tubes ■ Flanged flexible tubes ■ Other special shape products ■ Options *For more details, please refer to the PDF document or feel free to contact us.

  • others
  • Fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
PEEK resin fittings, stainless steel fittings, etc. "Excellent 88 Series"

PEEK resin fittings, stainless steel fittings, etc. "Excellent 88 Series"

80% lighter compared to metal! Numerous fittings made of PEEK resin that demonstrate excellent fluidity!

The "Excellent 88 Series" features fittings made from PEEK resin and SUS316, as well as a lineup of multi-layer fluorine tubes. Particularly recommended is the new PEEK resin fitting "PS-fit," which achieves an 80% weight reduction compared to metal fittings. Using a special injection molding method, we have also realized smooth flow paths, contributing to improved work efficiency and productivity. 【Product Lineup】 ■ PEEK resin fitting "PS-fit" ■ Stainless steel fitting "es-fit" ■ Multi-layer fluorine tube "REF3 Series" *For more details, please download the catalog or contact us.

  • others
  • Fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Connection fitting "TSJ type Taskal Joint"

Connection fitting "TSJ type Taskal Joint"

Super easy and reliable piping connections! Connectors usable over a wide range, from low pressure to high pressure.

The "TSJ Type Taskal Joint" is a connection fitting for medium diameter pipes that allows for one-touch connections as an alternative to flange connections. Due to its small outer diameter and compact design, it enables smaller holes for wall and floor penetrations, making insulation work more compact as well. Additionally, its lightweight nature improves efficiency in transportation and piping work. Moreover, it does not require tools such as impact wrenches and does not use bolts, eliminating the need for torque management and re-tightening. 【Features】 ■ Easy connection significantly reduces piping work time ■ Compact and lightweight design ■ No tools required for operation ■ Easy confirmation of joint locking ■ Usable over a wide range from low to high pressure ■ The packing is made of chlorine-resistant EPDM, ensuring excellent durability *For more details, please refer to the PDF document or feel free to contact us.

  • Water and sewerage pipe fittings
  • Fittings
  • Fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Bandless fitting for blade hose - Nasfitter

Bandless fitting for blade hose - Nasfitter

No hose band needed! This is a fitting that can be connected simply by tightening the nut.

The bandless fitting Nasfitter for blade hoses is a fitting that connects to hoses such as PVC blade hoses. To connect, simply insert the hose into the nipple part of the fitting and tighten the fastening nut until it contacts the end of the fitting body. Additionally, the locking component connected to the fastening nut seals while strongly pressing against the outer surface of the hose, ensuring that a secure tightening provides higher locking and sealing performance. 【Features】 ○ Easy hose installation ○ Reliable locking and sealing performance ○ Easy connection to equipment when using a coupler ○ No hose clamp required ○ Freely selectable based on the piping location used For more details, please contact us or download the catalog.

  • Piping and insulation
  • Fittings
  • Fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Toyoconnect/Toyoconnect F for food, beverage, and pharmaceutical piping

Toyoconnect/Toyoconnect F for food, beverage, and pharmaceutical piping

Improved safety and reliability with the joint set! Hygienic with a nipple shape, suitable for food and beverage applications. [Looking for sales partners]

The "Toyokonekta/Toyokonekta F" improves food safety and construction efficiency on-site. The joint set enhances safety and reliability, with the hose and joint insertion parts being the same size. Inserting the joint, which has been a struggle in the past, can now be done easily and quickly by warming the hose. Additionally, the nipple shape minimizes liquid pooling, making it hygienic and suitable for food and beverage applications. 【Features】 ■ Easy installation with smooth joint insertion ■ Hygienic structure that minimizes liquid pooling ■ No need for re-tightening, reducing maintenance ■ Shortened piping work time and standardized operations ■ Made of SUS, resistant to rust and hygienic, reusable, reducing waste *For more details, please refer to the PDF document or feel free to contact us. 【Looking for Sales Partners】 We will sell your products! Can we support you in expanding your sales channels?

  • Fittings
  • Fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Housing-type pipe fittings MIE-K that do not require screwing or welding.

Housing-type pipe fittings MIE-K that do not require screwing or welding.

Achieved a significant reduction in work time for 'housing joints' that can be connected with two bolt fastenings!

The housing-type pipe fitting "MIE-K" is a pipe fitting that does not require threading or welding. It can be tightened using only the included bolts and nuts with a glove-type pipe fitting. Compared to flanges, its outer dimensions are smaller, making it easy to install in tight spaces. Additionally, since only two bolts need to be tightened, work time can be reduced. 【Features】 ■ Significantly reduces work time compared to threading, welding, and flanges ■ Work involves only tightening two bolts ■ Has expansion and contraction performance and flexibility, allowing for the absorption of interlayer displacement *For more details, please download the catalog or contact us.

  • Sanitary fixtures
  • Water and sewerage pipe fittings
  • Fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to Fittings

COPYRIGHT © 2001-2026 IPROS CORPORATION ALL RIGHTS RESERVED.