Last Updated： Aggregation Period:Jun 03, 2026～Jun 30, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Jun 03, 2026～Jun 30, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Jun 03, 2026～Jun 30, 2026
This ranking is based on the number of page views on our site.
271～300 item / All 409 items
EcoSylph: Comfortably supporting energy saving with environmental technology.
Our company is the general agent for "Eco Sylphy" in the Tokyo area. Up to 30% energy savings! A gentle breeze eliminates temperature differences and horizontal temperature unevenness, creating a comfortable space.
![Eco-Sylph (Temperature Variation Elimination and Energy Saving) [Car Dealer]](https://image.www.ipros.com/public/product/image/731/2000117337/IPROS545200039892900636.jpg?w=280&h=280)
"Perfect for showrooms!" We create an energy-efficient and comfortable temperature environment with the attention-grabbing "Eco Sylphy" from a major car dealer.
Up to 30% energy savings! A gentle breeze eliminates temperature differences between the upper and lower areas and horizontal temperature unevenness, creating a comfortable space. This ceiling-mounted convection fan resolves various issues that tend to arise during air conditioning operation, such as vertical and horizontal temperature differences and stagnant air, in facilities and stores with high ceilings, atriums, irregular spaces, and large openings.
![Eco-Sylphy (Eliminating Temperature Variations and Energy Saving) [Supermarket]](https://image.www.ipros.com/public/product/image/031/2000117339/IPROS8952494825621010033.jpg?w=280&h=280)
Essential for combating condensation and mold in supermarkets! If you're struggling with condensation and mold around the ceiling of refrigerated cases, 'Ecosylph' will solve your problem.
If you are troubled by condensation and mold around the ceiling of the supermarket's cold case, 'Eco Sylphy' will solve your problems. Up to 30% energy savings! A gentle breeze eliminates vertical temperature differences and horizontal temperature unevenness, creating a comfortable space. This ceiling-mounted convection fan resolves various issues caused by vertical and horizontal temperature differences and stagnant air, which are likely to occur during air conditioning operation in facilities and stores with high ceilings, atriums, irregular spaces, and large openings.
Fully supporting daily operations! Carefully selecting reliable quality and thoughtfully designed auxiliary materials.
◎ "Insulation Tape" - This tape is suitable for preventing condensation at air conditioning vents and for sealing joints and cut-out areas of insulation tubes. The insulation material consists of 30 times expanded cross-linked polyolefin foam, and the adhesive part uses an acrylic-based adhesive (with a release liner). ◎ "Masking Tape" - Made from a flexible embossed film substrate, this tape is exceptionally easy to cut compared to standard tapes. It is available in strong adhesive and medium adhesive options. ◎ "Seal Tape" - An essential seal tape for threaded pipe installations. *For more details, please refer to the PDF document or feel free to contact us.
A representative model of hunters that boasts overwhelming texture. It is a standard model for Japan that complies with PSE standards.
Hunter ceiling fans, a top brand in the United States. The "Hunter Original" is a heritage model that carries on Hunter's 120-year history. It features a robust cast iron body with a substantial feel, wooden blades, and a traditional oil lubrication system.
Hunter Contemporary Series models for large spaces such as halls, warehouses, and factories. This is a standard model compliant with PSE standards for the Japanese market.
Hunter ceiling fans, a top brand in the United States. The "HFC-72" is an industrial model by Hunter with a beautiful design. Its large diameter blades provide excellent airflow performance in spacious areas.
Hunter ceiling fan Contemporary (Modern) series. This is a Japan domestic official model that complies with PSE standards.
Hunter ceiling fans, a top brand in the United States. The "Cassius" is a sporty and simple American classic contemporary model.
Hunter ceiling fan's old prestige model.
Hunter ceiling fans, a top brand in the United States. The "Bingham" is a premium Old World model that perfectly suits the Dixieland style.
A new ceiling fan brand "VENTO" born from the latest trends in art and architectural design in Europe and East Asia.
"Fiore," featuring VENTO's unique retractable blades that open like blooming flowers when rotating. It combines beauty that evokes a mystical presence with ample airflow performance provided by its eight blades.
The high static pressure fan delivers cool air to every corner of the indoor space through duct piping!
We handle the "Cool Breeze Fan High Static Pressure Type (SVRH Model)" in our Sanwa-style ventilators. This product creates a strong airflow that makes you feel even cooler, providing a cooling effect while also alleviating negative pressure in the room. It helps improve the workplace environment for workers (preventing heatstroke), as well as assisting companies in energy-saving measures and reducing CO2 emissions to combat global warming. 【Features】 ■ Environmentally friendly with CO2 emission reduction ■ Supplies clean cool air ■ Does not use fluorocarbons ■ Outer components made of stainless steel (SUS304 2B) ■ Excellent cost performance *For more details, please refer to the PDF materials or feel free to contact us.
Cost reduction through the uniformization of indoor temperature! It solves the causes of condensation, such as large temperature differences and stagnant air.
We will introduce the effects of "Eco Sylphy," which enhances air conditioning efficiency. The airflow circulating indoors equalizes the temperatures of the ceiling and floor, resolving winter concerns such as cold feet. Since the temperatures of the ceiling and floor are equalized, the air conditioner's set temperature can be relaxed, and its operating time can be intermittent. Additionally, the dual function of horizontal and vertical fans prevents condensation and mold. [Features] ■ Eliminates temperature disparities indoors ■ Cuts air conditioning costs by up to 30% ■ Prevents condensation and mold ■ Proven track record of numerous installations *For more details, please refer to the PDF document or feel free to contact us.
Blowing flat airflow up to 2.5m! Prevents dust, mold, and insects, keeping your home healthy! Ductless booster circulation fan!
This product is a ductless booster circulation fan. It improves ventilation within the chamber, preventing dust, mold, and insects, promoting a healthy home. The airflow can be adjusted in four stages and has the ability to blow flat air currents up to 2.5 meters. 【Features】 ■ Equalizes temperature and airflow within the chamber ■ Radiant effect from the chamber to the room ■ Energy-saving for heat and cooling fans ■ Reduces installation costs ■ Up to five fans can be linked together *For more details, please feel free to contact us.
We will diagnose the condition of the customer's factory and select the appropriate paint according to their needs.
The condition of the factory varies. In addition to solving the current issues we face, it is necessary to have plans that look toward the future. We will provide the "joy" of painting in a visible form and deliver quality, safety, and effectiveness that will inspire emotion. *For more details, please refer to the PDF document or feel free to contact us.
Shirocco fan is Mikami Ironworks.
From lightweight, compact mass-produced types to medium and large custom-made products. (We can discuss fan wheel sizes from φ150 to φ1500.) The material can be selected from aluminum, SS400, SUS304, SUS316, etc., depending on the application.
Axial fan is Mikami Iron Works.
From lightweight, compact mass-produced types to medium and large custom-made products. (Consultation is available for impeller sizes from φ450 to φ1500.) The materials can be selected from aluminum, resin, SS400, SUS304, SUS316, etc., depending on the application.
From φ53 small mass-produced general-purpose items to φ1500 large custom-made products.
It generates a large airflow at low static pressure.
Custom-made turbo fan
In this series, we manufacture several patterns such as straight wings and swept wings. We can accommodate both welded and riveted types in our structures, ranging from small to large sizes.
From large custom-made cross-flow fans to small mass-produced models.
Creates a uniform linear airflow for both small and large sizes. In addition to aluminum, corrosion-resistant surface treatment products are also available. Custom shafts can be made, including special orders for SUS304, 316, and 316L.
This is just one example. We have included representative items.
Main Applications and Custom Examples of Sanjo Iron Works' Blowers and Heat Exchangers. Based on the vast experience gained over 55 years of activity, we appropriately respond to special specifications regarding shape, material, and coating, as well as inquiries about different voltage specifications for overseas use and explosion-proof environment compatibility, down to detailed requests for specified dimensions. 【Contents】 ○ 750mm diameter motor direct-coupled axial fan ○ 900mm diameter motor direct-coupled axial fan with explosion-proof motor ○ Integrated aluminum cast axial fan impeller, diameter φ750mm, suitable for both forward and reverse rotation ○ 750mm diameter motor direct-coupled axial fan with filter case ○ 15kW x 4P motor direct-coupled axial fan, diameter φ1500mm For more details, please contact us or download the catalog.
Please consult us for the design and manufacturing of centrifugal fans, axial flow fans, turbo fans, and cross flow fans. We also offer consultations for maintenance and balance correction.
A fan wheel for a palm-sized small blower intended for mass production. Please consult us for large blowers with a fan wheel diameter of about 1.5 meters. Mikami Iron Works' blowers have decades of experience in customization for low and high temperature conditions and explosion-proof environments. Options for stainless steel or aluminum construction are also available. Regarding heat exchangers, we primarily offer high-performance products that use copper rolled fin tubes.
This is a mist fan with a special design that easily creates a "refreshing spot" with a non-wet mist.
- You can easily create cooling spots at event venues and service areas. - A mist fan with a unique structure that sprays mist 360 degrees horizontally and far away. - By using multiple self-standing revolution units with one pressurized pump, you can cool a large area of up to 120 meters in length with "dry mist." - Installation is extremely easy. It can be set up immediately if there is a water source and power supply.
![[Ventilation Case] About Factory Ventilation](https://image.www.ipros.com/public/product/image/f86/2000483294/IPROS37052562575018357492.png?w=280&h=280)
We will repeatedly discuss the number of units to be installed and the installation locations to meet our customers' requests!
We received an inquiry regarding factory ventilation from a factory in Sakai City, Osaka Prefecture. To cool the factory, it is first necessary to improve the airflow within the factory. By reviewing and maintaining rooftop ventilators, roof fans, and ventilators, we can achieve ventilation throughout the entire space. In this case, it was found that the existing equipment provided only 2.2 air changes per hour, which is significantly below the required 10 air changes per hour. To approach the necessary ventilation rate, we proposed the installation of new equipment. [Case Study] ■Location: Sakai City, Osaka Prefecture ■Details: 8 units of Roof Fan SVP-900T *For more details, please refer to the external link or PDF document, or feel free to contact us.
![[Ventilation Example] Ventilating a Ceiling Manufacturing Factory](https://image.www.ipros.com/public/product/image/8ca/2000483301/IPROS83456280643815269181.png?w=280&h=280)
Introducing a case where we proposed the installation of additional roof fans for ventilation in a sealing manufacturing factory.
We received an inquiry regarding ventilation at a sealing manufacturing factory in Katsuta-gun, Okayama Prefecture. To cool the sealing manufacturing factory, it is essential to improve the airflow within the facility. By reviewing and maintaining rooftop ventilators, roof fans, and ventilators, overall ventilation of the space can be achieved. In this case, we proposed the installation of additional roof fans. [Case Study] ■ Location: Katsuta-gun, Okayama Prefecture ■ Details: Installation of additional roof fans - 1 unit of SVGH-900T - 2 units of SVO-750T *For more details, please refer to the external link or PDF materials, or feel free to contact us.
![[Ventilation Case] Ventilating a Valve Manufacturing Company](https://image.www.ipros.com/public/product/image/61a/2000483304/IPROS79439624585607617552.png?w=280&h=280)
Introducing a case where we proposed the replacement of roof fans for ventilation at a valve manufacturing company.
We received an inquiry regarding ventilation from a valve manufacturing company in Komaki City, Aichi Prefecture. To cool down the valve manufacturing company, it is first necessary to improve the airflow within the facility. By reviewing and maintaining rooftop ventilators, roof fans, and ventilators, we can achieve ventilation throughout the entire space. In this case, we proposed a roof fan replacement project. [Case Study] ■Location: Komaki City, Aichi Prefecture ■Content: Roof fan replacement project *For more details, please refer to the external link or PDF materials, or feel free to contact us.
![[Heatstroke Measures] Installation of additional roof fans to compensate for insufficient ventilation.](https://image.www.ipros.com/public/product/image/32f/2000634712/IPROS92690430268894511272.png?w=280&h=280)
The most important measure against heat is ventilation! We propose the installation of additional roof fans to compensate for the insufficient ventilation.
At the production factory in Nakano City, Ibaraki Prefecture, the temperature inside the building reaches around 38°C during the summer, creating a very harsh working environment. Although two existing roof fans were installed, the ventilation volume was insufficient for the building. To address the lack of ventilation, we proposed the installation of additional roof fans. We also conducted a demonstration of a spot bazooka and an evaporative cooler. After installation, natural wind flowed in through the shutter opening, creating air circulation inside the building. 【Overview】 ■ Location: Nakano City, Ibaraki Prefecture ■ Business: Production factory for hardware and materials ■ Existing air conditioning equipment: 2 roof fans ■ Newly installed products: 4 roof fans (SVO-750T) *For more details, please refer to the PDF document or feel free to contact us.
![[Heat and Ventilation Measures] We propose improvements to heat retention, contributing to a positive circulation throughout the entire factory!](https://image.www.ipros.com/public/product/image/9df/2000730129/IPROS93114603967165302088.png?w=280&h=280)
It is difficult to ventilate when handling powders, but we also want to implement measures against heat stroke for employees. While considering the impact on the business, we aim to achieve heat and ventilation measures throughout the entire factory.
It is difficult to implement heat countermeasures while avoiding foreign material contamination. This time, we received an inquiry about heat countermeasures for the entire factory from a powder processing manufacturer. 【Current Issues】 - Since we handle powders and need to avoid contamination of product raw materials, we cannot install cooling devices like air coolers inside the building. - Due to the proximity to the sea, outdoor equipment requires measures against salt damage. - The entire building has not been insulated. 【Proposed Solutions】 - The interior is in a state where powder is swirling due to manufacturing. First, we calculated the necessary ventilation frequency for the existing roof fans to review the ventilation system, and it was found that the ventilation volume is insufficient, so we propose replacement and expansion. *For more details, please download the materials or contact us directly.
Suppress condensation and mold in the foundation space (underfloor)! Dedicated bypass fan for foundation insulation methods.
The "eco. Kiso Karari" is a bypass fan incorporated into a Type 3 ventilation system that exhausts air and moisture from the foundation space of a foundation insulation method. By routing the indoor air, which is dehumidified during the summer, through the underfloor space, it is expected to enhance the dehumidification effect in that area. Additionally, there is an independent duct (double duct) around the fan section, which allows for 24-hour ventilation even when the fan is stopped. 【Features】 ■ Maintains a 24-hour ventilation route even when the fan is stopped ■ After the moisture release from the foundation concrete is completed, even if the bypass fan is stopped, about 60% of the ventilation in the foundation space can be secured by the power of the Type 3 ventilation itself ■ Ventilation routes can be created through notches in structural plywood when installed in partition walls *For more details, please download the PDF or feel free to contact us.
On the wall of the closet! Effectively exhausts dirty air and humidity from the storage space at all times.
The "Karari Fan" is an exhaust fan specifically designed for closets and storage spaces that are prone to humidity and mold. It continuously expels dirty air and humidity from the storage area and can also be used as an assist fan to ensure the ventilation path for a Type 3 ductless 24-hour ventilation system. Color variations include two types: white and dark gray, and we offer three types of wall thickness compatibility: standard type, thick wall type, and thin wall type. 【Features】 ■ Revolutionary technology that reliably expels dirty air and humidity from the storage area at all times ■ Our unique double link mechanism *For more details, please download the PDF or feel free to contact us.
J&S duct fans that cooperate in reducing the cost of environmental improvement.
Introduction of "Duct Fan" from J&S Corporation.
For smoke and exhaust! High performance, excellent durability, low price, and low noise duct fan!
The "DF600-3SA Oscillating" is a high-performance, highly durable stand-type (with casters) duct fan. It features a mesh guard at the air intake, and the main body is robust and exceptionally durable. Additionally, it comes standard with a motor protection device (built-in thermal protector). It is characterized by low price, low noise, energy efficiency, compact design, and safety, making it ideal for smoke and exhaust ventilation. Specifications include: Power supply: three-phase 200V, frequency: 50/60Hz, number of poles: 4, power consumption: 1500W, airflow: 340/420m3/min, number of blades: 8, weight: 103kg, and oscillation angle of 85 degrees. For more details, please contact us or refer to the catalog.
