Controller Product List and Ranking from 41 Manufacturers, Suppliers and Companies

Last Updated： Aggregation Period:Sep 17, 2025～Oct 14, 2025
This ranking is based on the number of page views on our site.

Controller Manufacturer, Suppliers and Company Rankings

Last Updated： Aggregation Period:Sep 17, 2025～Oct 14, 2025
This ranking is based on the number of page views on our site.

  1. シー・エイチ・シー・システム 東京支店 Tokyo//Building materials, supplies and fixtures manufacturers
  2. null/null
  3. デンソーウェーブ Aichi//others
  4. 4 CoolAutomation Japan Tokyo//Trading company/Wholesale
  5. 5 東亜システム Aichi//Service Industry
Go to Company Ranking

Controller Product ranking

Last Updated： Aggregation Period:Sep 17, 2025～Oct 14, 2025
This ranking is based on the number of page views on our site.

  1. CoolMaster ・　CoolMaster PRO CoolAutomation Japan
  2. Wireless Controller "RHS2" 東亜システム
  3. Robot Controller "RC8" デンソーウェーブ
  4. 4 Demand Control System "Ai-Glies" プールス
  5. 5 CO2 sensor controller シー・エイチ・シー・システム 東京支店

Controller Product List

286～300 item / All 712 items

Displayed results
Controller C-40

Controller C-40

Easy operation, abundant features! Stylish simple controller.

■Two Types of Security Modes In full security mode, all channels 1 to 4 are armed. In partial security mode (chime mode and selection), only channels 1 and 2 are armed. *Partial security mode and chime mode cannot be used simultaneously. ■Chime Mode When chime mode is selected, three different tones will sound for each input. 1CH: Ding-dong 2CH: Beep beep beep 3CH: Melody (Für Elise) ■Security Operation The set/unset operation for full security can be performed either by using the main unit's full security button with a delay timer or by remote operation using a two-way remote switch. *When using the two-way remote switch, the full security button and partial security button cannot be operated. ■Sensor Input Each channel can switch between a/b contacts, allowing for the connection of not only security sensors but also call switches. ■External Output Equipped with two general alarm outputs (no-voltage a contacts) and one visitor output (no-voltage a contact), it is possible to activate different external devices during an alarm and when notifying visitors. *The visitor output can be used as a general alarm output in the settings.

  • Security Sensor Systems
  • Security devices

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Security Controller for 3 Lines C-603-2

Security Controller for 3 Lines C-603-2

Easy operation and a wealth of features for centralized management of diverse sensing systems. Communication capabilities allow for coordinated operation of up to four devices.

A controller equipped with 3 intrusion alert lines, 1 fire alert line, and 1 emergency input line (for healthcare). It allows connection to various sensors for crime prevention and disaster prevention purposes, as well as emergency push buttons for healthcare. It has a comprehensive output (both voltage-free and voltage) and individual outputs for each input, enabling connection to related devices such as automatic reporting machines, surveillance cameras, and alarm bells. Universal design compliant It features large buttons that are easy to see and operate, with a light indicator. Voice message guidance function Voice messages will play during operation, making it easy to confirm operations. Four alert patterns can be set ● Four alert patterns can be configured: home alert, visitor notification, home alert + visitor notification, and outing alert. ● The lines (areas) for home and outing alerts can be set individually. Alert and alarm delay function The delay time can be adjusted in four stages (0 (none), 30 seconds, 60 seconds, 90 seconds) for both "from the time the outing alert is set until it actually enters alert mode" and "from the time an intrusion signal is received during the outing alert until the alarm operation is triggered."

  • Security Sensor Systems
  • Security devices

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Security Controller for 6 Lines C-606-2

Security Controller for 6 Lines C-606-2

Easy operation and a wealth of features for centralized management of diverse sensing systems. Communication functions allow for coordinated operation of up to four devices.

■ A controller equipped with 6 intrusion detection lines, 1 fire detection line, and 1 emergency input line (for healthcare). It allows for the connection of various sensors tailored for security and disaster prevention purposes, as well as emergency push buttons for healthcare. It features comprehensive outputs (both voltage-free and voltage) and individual outputs for each input, enabling connections to related devices such as automatic reporting machines, surveillance cameras, and alarm bells. ■ Universal design compliant It adopts large buttons that are illuminated for visibility and easy to operate. ■ Voice message guidance function Voice messages will play during operation, making it easy to confirm actions. ■ Four types of alert patterns can be set ● Four alert patterns can be configured: home alert, visitor notification, home alert + visitor notification, and outing alert. ● The lines (areas) for home and outing alerts can be set individually. ■ Alert and alarm delay function The delay time from "the moment the outing alert is set until it actually enters alert mode" and "the moment an intrusion signal is received during the outing alert until the alarm operates" can be adjusted in four stages (0 (none), 30 seconds, 60 seconds, 90 seconds).

  • Security Sensor Systems
  • Security devices

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Controller with emergency push button for 1 line - C-21P

Controller with emergency push button for 1 line - C-21P

Adding a panic button function to the basic features! A security controller with high reliability and easy operation.

Adding a panic button function to the basic features! A security controller with high reliability and easy operation.

  • Security Sensor Systems
  • Security devices

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
ID history event memory controller C-706

ID history event memory controller C-706

Easy to operate with voice guidance! A controller with event memory that can store both ID codes and operation history.

■ID history management allows for operator verification The ID code for each non-contact card is stored along with the operation history, making it possible to confirm when and by whom the operation was performed. ■Up to 99 non-contact cards (ISO/IEC15693) can be registered By using non-contact cards, illegal operations by outsiders can be prevented. ■Management function for up to 999 history records Events such as arming, disarming, and alarms can be recorded with date and time, storing up to 999 entries, which can be displayed on the LCD screen. ■Two external readers can be connected Up to two dedicated external readers (sold separately) can be connected. The alarm status can also be indicated by LED on the external reader. ■Voice message guidance function During operation, voice messages will play, making it easy to confirm operations. The dedicated external reader will also play voice messages similarly. ■Arming and alarm delay function The delay time can be set up to 999 seconds for both "from the time the outdoor arming is set until it actually enters the armed state" and "from the time an intrusion signal is received during outdoor arming until the alarm operation is executed."

  • Security Sensor Systems
  • Security devices

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Communication-linked multi-channel controller for 10 lines, CX-3010

Communication-linked multi-channel controller for 10 lines, CX-3010

Multi-channel controller capable of supporting systems from small to large scale, with main and sub-linked functionality.

Communication Function Equipped with communication capabilities, it allows for mutual operation and situation confirmation at multiple locations. Up to three sub-panels can be connected (within a total wiring distance of 1 km). *It is also possible to connect sensors to the same channel on both the main panel and sub-panels. External outputs are provided from both the main panel and sub-panels. Please use CPEV-S with a diameter of 1.2 mm or more for communication wiring. Diverse Function Expansion By combining various optional units, it can accommodate a wide range of needs. ● Individual Output Unit (CX-3000) It is possible to output various signals such as security/disarm state signals, alarm signals, and loop signals by channel. By incorporating multiple units, it is possible to output up to three types of signals per channel. ● Bus Controller Interlocking Unit (CX-3000BUS) This unit communicates with the bus controller "BUS-C800" to send and receive various data. It can be connected with minimal wiring, significantly enhancing installation convenience. By using "BUS-K1," security/disarm functions can be performed for each channel using a three-way remote switch.

  • Security Sensor Systems
  • Security devices

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Communication-linked multi-channel controller for 20 lines CX-3020

Communication-linked multi-channel controller for 20 lines CX-3020

Multi-channel controller capable of supporting systems from small-scale to large-scale, with primary and secondary linkage.

Communication Function Equipped with communication capabilities, it allows for mutual operation and situation confirmation at multiple locations. Up to three sub-panels can be connected (total wiring distance within 1 km). *It is also possible to connect sensors to the same channel on both the main panel and sub-panels. External outputs are provided from both the main panel and sub-panels. Please use CPEV-S with a diameter of 1.2 mm or more for communication wiring. Diverse Function Expansion By combining various optional units, it can accommodate a wide range of needs. ● Individual Output Unit (CX-3000) It is possible to output various signals such as security/disarm state signals, alarm signals, and loop signals by channel. By incorporating multiple units, it is possible to output up to three types of signals per channel. ● Bus Controller Linkage Unit (CX-3000BUS) This unit communicates with the bus controller "BUS-C800" to send and receive various data. It can be connected with minimal wiring, significantly enhancing installation convenience. By using "BUS-K1," security/disarm functions can be performed for each channel using a three-way remote switch.

  • Security Sensor Systems
  • Security devices

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Communication-linked multi-channel controller for 30 lines CX-3030

Communication-linked multi-channel controller for 30 lines CX-3030

Main and sub-linked multi-channel controller capable of supporting small to large-scale systems.

■Communication Function Equipped with communication functions, it allows for mutual operation and situation confirmation at multiple locations. Up to three sub-panels can be connected (total wiring distance within 1 km). *It is also possible to connect sensors to the same channel on both the main panel and sub-panels. External outputs are provided from both the main panel and sub-panels. Please use CPEV-S with a diameter of 1.2 or more for communication wiring. ■Diverse Function Expansion By combining various optional units, it can accommodate a wide range of needs. ●Individual Output Unit (CX-3000) It is possible to output various signals such as security/disarm state signals, alarm signals, and loop signals by channel. By incorporating multiple units, it is possible to output up to three types of signals per channel. ●Bus Controller Linked Unit (CX-3000BUS) This unit communicates with the bus controller "BUS-C800" to send and receive various data. It can be connected with reduced wiring, significantly enhancing the convenience of installation. By using "BUS-K1," security/disarm functions can be performed for each channel using a three-way remote switch.

  • Security Sensor Systems
  • Security devices

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Multi-Channel Controller CX-110

Multi-Channel Controller CX-110

By specializing in security, we achieve compactness, lightweight design, and cost reduction! Reliable peace of mind with simple operation!

■Easy Operation Designed for commercial use, it can be used and operated from the day of installation with just four simple operations: "Arm, Disarm, Alarm Stop, and Recovery." ■Compact, Lightweight, and Low Cost ● Volume ratio: approximately 1/3 ● Weight ratio: approximately 1/3 By using resin molding, we achieved a compact and lightweight design, and through lot production for mass and planned production, we realized a low cost. Although it is compact, lightweight, and low-priced, it has significantly improved specifications compared to older models. ■Backup We adopted a small and lightweight nickel-hydrogen battery (DC12V 1000mA) for backup. It can provide approximately 30 minutes of backup when fully charged. ■Reliable Domestic Design and Production With a professional design that withstands security operations, it is suitable for use as a security controller in factories, buildings, and offices, ensuring peace of mind. ■User-Friendly Design ● By connecting a two-way external remote switch, remote (wired) collective arming/disarming is possible. (Compatible product: KE-500R) ● Up to four controllers can be connected.

  • Security Sensor Systems
  • Security devices

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Graphic panel integrated multi-channel controller GH-310

Graphic panel integrated multi-channel controller GH-310

Alert and reporting status is clear at a glance! A multi-channel controller with an integrated graphic panel.

■Main Features ● The warning area is indicated by a green LED and the alarm area is indicated by a flashing red LED on the graphic display. ● It can be installed in a space-saving manner due to its integrated design. ● Changes to the map can be easily accommodated by replacing the sheet. ● Signal input can be switched to a contact point, allowing it to be used for equipment monitoring. ● Simultaneous warning/cancellation, individual warning/cancellation, and simultaneous warning/cancellation via remote switch are possible. ● The remote switch is compatible with KE-502R.

  • Security devices
  • Security Sensor Systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Controller D7K-F10

Controller D7K-F10

It is a fence sensor that detects intruders from the perimeter fence and performs security monitoring.

■Surface surveillance method monitoring the entire fence (net part) By adopting the surface surveillance method, more stringent security is possible. It is also an optimal sensor for dual surveillance use in conjunction with infrared sensors at critical facilities (such as power plants). ■Not affected by snow, dense fog, frost, etc. This sensor is ideal for installation locations where infrared surveillance is difficult. ■Simple hardware configuration The simple configuration allows for system construction tailored to customer requirements. ■Reduction of construction costs and shortening of construction period By simply securing the sensor cable directly to the fence with cable ties (included), costs are kept down, and the construction period is shortened.

  • Security Sensor Systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
IP Controller C-850BUS

IP Controller C-850BUS

A multifunctional security controller for corporate use, equipped with crime prevention controller and automatic reporting device functions, designed for tenant properties.

■Features ● Compact design that matches stores and offices. ● Supports not only voice notifications but also connections to IP lines for email notifications. ● Up to 5 locations can be set for voice notifications and 5 locations for email notifications. ● Security activation/deactivation can be performed using a dedicated FeliCa-compatible card reader. ● Tenants can operate security for up to 5 exclusive areas or 4 exclusive areas plus 1 shared area. ● Can connect 8 wired sensor circuits and up to 30 dedicated bus network sensors. ● Settings for security, emergency, fire, gas, urgent, and equipment abnormalities can be configured for each sensor. ● Equipped with a chime mode to notify of visitors. ● Can store and display up to 120 operation histories. ■Features of FeliCa-compatible Card Reader ● The card reader FC-151 for single tenants and the card reader TS-SC64C for multiple tenants can connect up to 10 units. ● It is possible to send an email indicating who activated/deactivated the security. ● Commercially available FeliCa cards can be registered, eliminating the need for a dedicated security card. ● Electric locks can be unlocked using card operations.

  • Security Sensor Systems
  • Emergency alarm system

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
ACsmart2 Controller ACS-C2

ACsmart2 Controller ACS-C2

Sophisticated design, feature-rich card reader. Smart design that can be quickly set up and put into operation.

■FeliCa/Mifare/I-CODE Compatible Compatible with FeliCa/Mifare/I-CODE cards. Supports both fixed reading mode for each card and multi-read. ■Sophisticated Design Card Reader The compact ACS-DHR The ACS-BLR features a novel design that lights up blue around the area during card verification. The ACS-FMI has a sophisticated design that lights up entirely in blue during card verification. The ACS-TMR is a slim design card reader with a keypad. ■Feature-Rich Keypad Card Reader The keypad card reader ACS-TMR can operate with three verification methods: "Card only," "PIN only," and "Card + PIN." ■Protection Rating IPX5 The card readers ACS-DHR and ACS-BLR have a protection rating of IPX5, allowing them to be installed in locations exposed to direct rain, such as building exteriors.

  • Entrance/exit management and personal identification system

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
tranSpeed Controller IDC2-E

tranSpeed Controller IDC2-E

tranSpeed Controller IDC2-E

■Features ● All RF components are integrated within the antenna unit, allowing for a 4-wire connection (2 wires for communication + 2 wires for power) with the controller. (No high-frequency cables or dedicated lines are required.) ● Up to two antennas can be connected to a single controller. ● Number of transponder registrations: 2000 entries ● Transponders do not use batteries. ● User authority management and history management for up to a 16-gate system can be performed using registration software. ● The ID data of the transponders is encrypted, so it will not react to all tags like systems using FA tags. ● With an output of 250mW, there is no need to apply for a specific radio station as a specific low-power radio equipment. * The card detection distance may be shorter depending on the surrounding environment of the antenna installation location and the conditions around the card. * If used with an output exceeding 250mW, an application as specific radio equipment is required.

  • Entrance/exit management and personal identification system

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to Controller

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.