Construction method Product List and Ranking from 1598 Manufacturers, Suppliers and Companies

Last Updated： Aggregation Period:Oct 22, 2025～Nov 18, 2025
This ranking is based on the number of page views on our site.

Construction method Manufacturer, Suppliers and Company Rankings

Last Updated： Aggregation Period:Oct 22, 2025～Nov 18, 2025
This ranking is based on the number of page views on our site.

  1. Taiyo Kisokogyo Co.,Ltd. Aichi//General contractors and subcontractors
  2. 水研 Shiga//Building materials, supplies and fixtures manufacturers
  3. null/null
  4. 4 三晃金属工業 Tokyo//General contractors and subcontractors
  5. 5 エスケー化研 Osaka//Building materials, supplies and fixtures manufacturers
Go to Company Ranking

Construction method Product ranking

Last Updated： Aggregation Period:Oct 22, 2025～Nov 18, 2025
This ranking is based on the number of page views on our site.

  1. Install the valve without stopping the water! 'EM Continuous Water Valve Method' 水研
  2. Hybrid Concrete Reinforcement Method "Solid Remain Alpha"
  3. Support for bridge pier reinforcement nationwide: "Temporary Closure LPF Method" 日本海洋サービス 大阪支店
  4. 4 Gradient Construction Method for Residential Exterior Walls "KF Gradient Method" ＫＦケミカル
  5. 5 Reinforcement of existing beam after hole cutting: "Redouble Method" コンステック

Construction method Product List

346～360 item / All 4238 items

Displayed results
Hanger-type balance beam method

Hanger-type balance beam method

Construction using precast concrete panels on walls! Ideal for port construction and other applications.

The hanger-type balance beam construction method is a installation technique for attaching precast concrete panels to steel sheet piles, steel pipe sheet piles, concrete sheet piles, etc. It is suitable for construction that is constrained during execution, such as port construction. 【Features】 - By dropping the balance beam panel, which has a hanger plate attached, into channel steel or similar structures installed at the same position as the installation structure, the spacing between the installation structure and the panel's vertical position is determined. - Since it hangs from the channel steel via a hanger (hook) plate, it allows for easy lateral adjustment of the panel's left and right positions by sliding it horizontally. Additionally, because it hangs via the plate, the alignment of the balance beam panel's surface and wall slope can be easily determined. - The balance beam panel is suspended from the channel steel through a hanger plate, which enhances crane efficiency and improves workability. *For more details, please download the catalog or contact us.*

  • Special Construction Method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Slope Greening: Rock Face Planting Method D-1

Slope Greening: Rock Face Planting Method D-1

Slope greening with planting - Rock surface planting method D-1

This is a construction method that can be implemented in environments where construction machinery cannot be brought in. 【Features】 ○ Even on steep slopes, the use of TK Bans prevents the runoff of compost and quality soil, while also excelling in water retention and stability. ○ The products are made from burlap bags, which, over time, provide the effect of nurturing tree roots as compost and contribute to environmental conservation through natural recycling. It is also possible to restore greening in areas such as steep slopes, crushed stone sites, and former quarry sites. ○ Patent No. 2847086 ● For other functions and details, please contact us.

  • Wall and rooftop greenery

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Slope greening with vegetation planting on existing mortar spray surfaces using vegetation planting methods.

Slope greening with vegetation planting on existing mortar spray surfaces using vegetation planting methods.

Slope greening with vegetation planting - Existing mortar spray surface vegetation planting method.

This is a vegetation planting method that is advantageous for the regeneration of the natural environment on existing mortar spray surfaces. 【Features】 ○ Minimizes industrial waste such as mortar and rubble that typically accumulates during regular construction. ○ Uses TK Claw, ensuring secure fixation of tree roots. ○ Plants directly into the ground, promoting healthy growth. ○ Minimal drilling required, making the disposal of excavated soil easy. ○ Existing mortar and concrete spray surfaces can harmonize with the landscape. ○ Patent No. 3460007 ● For other functions and details, please contact us.

  • Earthworks
  • Pile and foundation work
  • Planting work

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Rooftop greening T.K. method of rooftop planting greening technique

Rooftop greening T.K. method of rooftop planting greening technique

It is an environmentally friendly rooftop greening that alleviates the heat island phenomenon.

■We have made it possible to plant greenery using rooftop greening materials (thin-layer greening base mats) that can withstand strong winds on the roof. ■Construction can be completed in a short period, making it suitable for urgent projects. ■It complies with municipal environmental regulations. ■It is a project certified by the Ministry of Economy, Trade and Industry as a "New Collaboration."

  • Wall and rooftop greenery

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Ground improvement Top Base (Koma) method

Ground improvement Top Base (Koma) method

Ground Improvement Top Base (Koma) Method

This is a very innovative construction method that generates minimal pollution, such as vibrations and noise, during on-site construction work, resulting in a small impact on the environment. 【Features】 ○ Safely supports superimposed loads even on extremely weak ground. ○ Controls settlement and prevents differential settlement. ● For other functions and details, please download the catalog.

  • Earthworks
  • Ground improvement
  • Pile and foundation work

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Soil conditioner Parcoat

Soil conditioner Parcoat

Soil improvement material Parcoat

It is a non-polluting wood pulp sludge ash-based solidifying material. 【Features】 ○ Wood ash originally has weak alkaline properties, but it neutralizes with soil and moisture in the soil, maintaining the pH value of improved soil in the neutral range. ○ Certified by the Japan Environmental Association Eco Mark Office. ● For other functions and details, please contact us.

  • Soil improvement material
  • Other civil engineering works

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Automated Open Caisson Method (SOCS)

Automated Open Caisson Method (SOCS)

Automated Open Caisson Method (SOCS)

This construction method overcomes the issues associated with traditional open caisson methods by utilizing advanced technology, enabling reliable and high-precision sinking of caissons under various ground conditions. It is environmentally friendly and allows for significant labor savings and shortened construction periods through automation. The key feature of this method is the introduction of an automatic underwater excavation machine at the caisson's cutting edge, which allows for reliable excavation of the ground directly beneath the caisson, a task that was previously difficult. This excavator can handle hard ground and withstand water pressure of up to 1.0 MPa, making it capable of construction at depths of up to 100 meters. Since the excavation and soil removal operations can be performed independently, it is also applicable to large-diameter shafts. The method consists of three systems: an automatic excavation and soil removal system, an automatic sinking management system, and a precast body system, making it applicable to a wide range of ground conditions from soft soil to medium-hard rock. These systems can be used in combination, or each system can be employed individually or in pairs depending on the site conditions.

  • Ground foundation construction method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Riprap construction method

Riprap construction method

Riprap construction method

A lapstone is a structure that integrates natural stones with narrow holes, anchored by zinc-aluminum alloy coated iron wire and synthetic resin stopper panels. By backfilling this with backing material and stacking it at a steep gradient, it creates an "anchored natural stone masonry method," resulting in an economical and robust revetment that considers the ecosystem of aquatic organisms such as fish and crabs. 【Features】 ○ Creates a porous revetment that can support the habitat of fish and crabs. ○ Despite being a masonry structure, it forms a strong revetment that can withstand soil pressure and water flow due to the anchoring effect. ● For other functions and details, please contact us.

  • Airport facilities
  • River construction
  • stone

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Ultra-lightweight and ultra-simple panel assembly method for rainwater storage and infiltration using recycled plastic.

Ultra-lightweight and ultra-simple panel assembly method for rainwater storage and infiltration using recycled plastic.

Rainwater storage infiltration tank using a panel assembly method with a 0.5m span.

Excellent in storage space, transportation efficiency, and constructability, flexibly adaptable to any location or terrain.

  • Aggregates and crushed stone
  • Agricultural civil engineering works
  • Rainwater infiltration facilities

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Sewer Composite Manhole Rehabilitation Method "Eba Sheet Method"

Sewer Composite Manhole Rehabilitation Method "Eba Sheet Method"

No special skills required! A sewer composite manhole rehabilitation method that can be constructed with a small road occupancy area.

The "Evashito Method" is a composite manhole rehabilitation technique that involves attaching an "FRP sheet" to the inner wall of an existing manhole that has advanced corrosion, using an expansion frame, and filling the gap between the sheet and the existing manhole with mortar. With a thickness of 1.5mm for the FRP sheet, the method promises increased longevity through enhanced corrosion resistance and durability, while the filling material, a non-shrink mortar, maintains strength over the long term. Additionally, there is no need for heavy machinery, and no special skills are required, allowing for construction in a small road occupancy area. By utilizing the existing manhole, material savings are achieved, resulting in excellent economic efficiency along with shortened construction periods. 【Features】 ■ Demonstrates strong robustness through complete integration with the existing manhole ■ Filling material maintains strength over the long term with non-shrink mortar ■ Can be constructed in a small road occupancy area ■ Achieves material savings by utilizing the existing manhole ■ Passes acid resistance and sulfur intrusion tests *For more details, please refer to the PDF document or feel free to contact us.

  • Sewerage facilities

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Seismic reinforcement method "Remake Ring"

Seismic reinforcement method "Remake Ring"

The applicable rehabilitation pipe is a self-supporting pipe! Seismic reinforcement method for the connection between the rehabilitation pipe and the manhole using non-excavation.

"Remake Ring" is a seismic retrofitting method that installs flexible joints at the connection points between the rehabilitation pipe (self-supporting pipe) and the manhole without excavation, designed to accommodate the extraction, protrusion, and bending of the rehabilitation pipe under Level 2 seismic motion. It is possible to install flexible joints in areas where pipe rehabilitation methods have already been completed, as well as to install flexible joints in conjunction with pipe rehabilitation methods. The applicable existing pipe types are reinforced concrete pipes and ceramic pipes, with applicable existing pipe diameters of nominal sizes 250 and 300. 【Features】 ■ Accommodates extraction, protrusion, and bending of rehabilitation pipes under Level 2 seismic motion ■ Obtained construction technology examination certification in March 2016, No. 1504 *For more details, please refer to the PDF materials or feel free to contact us.

  • Earthquake-resistant construction method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Construction method "Runan HAT Method"

Construction method "Runan HAT Method"

The lifting work takes only a few minutes! A new method for installing roofs and walls, wiring and piping for electricity, equipment work, and painting materials is done on the ground.

The "Runan HAT Method" is a new construction technique that builds truss panels in the same way a gentleman in a suit wears a hat. The assembly of truss panels is done on the ground, where the installation of roofs and walls, as well as the wiring and piping for electricity, air conditioning, and sprinklers, along with equipment work and painting of materials, takes place. If there is extra space on the site, the foundation and steel frame construction, as well as the assembly of trusses and roof and piping work, can proceed in parallel. 【Features】 ■ Improved work efficiency ■ Shortened construction period ■ Reduced manpower for roof and piping work ■ Cost reduction ■ The lifting operation is completed in just a few minutes after starting the lift *For more details, please refer to the PDF materials or feel free to contact us.

  • Wood panel and frame wall construction
  • Civil Engineering Method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to Construction method

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.