Construction method Product List and Ranking from 41 Manufacturers, Suppliers and Companies

Last Updated： Aggregation Period:Sep 17, 2025～Oct 14, 2025
This ranking is based on the number of page views on our site.

Construction method Manufacturer, Suppliers and Company Rankings

Last Updated： Aggregation Period:Sep 17, 2025～Oct 14, 2025
This ranking is based on the number of page views on our site.

  1. 太洋基礎工業 Aichi//General contractors and subcontractors
  2. コンステック Osaka//General contractors and subcontractors
  3. 水研 Shiga//Building materials, supplies and fixtures manufacturers
  4. 4 エスケー化研 Osaka//Building materials, supplies and fixtures manufacturers
  5. 5 三晃金属工業 Tokyo//General contractors and subcontractors
Go to Company Ranking

Construction method Product ranking

Last Updated： Aggregation Period:Sep 17, 2025～Oct 14, 2025
This ranking is based on the number of page views on our site.

  1. Install the valve without stopping the water! 'EM Continuous Water Valve Method' 水研
  2. Architectural and civil engineering vibration control damper "Taylor Fluid Viscous Damper" コンステック
  3. Reinforcement of existing beam after hole cutting: "Redouble Method" コンステック
  4. 4 Stretchable Joint Repair Method "Ex Relife Method"
  5. 5 Kaiserslautern method (RC construction) 日本カイザー

Construction method Product List

3061～3075 item / All 4195 items

Displayed results
Installation Pipe Repair Method "P-Installation Lining Method"

Installation Pipe Repair Method "P-Installation Lining Method"

A method for repairing mounting pipes made of polyethylene resin materials.

The "P-Mounting Lining Method" is a technique for repairing mounting pipes using polyethylene resin materials that excel in chemical resistance, abrasion resistance, and elongation. Rehabilitation materials (CPI pipes) are inserted from the mass side and integrated with the main pipe (polyethylene pipe) using welding machinery. Additionally, a gap may occur between the mounting pipe and the CPI pipe; however, since the CPI pipe has a load-bearing strength equal to or greater than that of PVC pipes (nominal diameter φ100), it is considered standard practice not to require backfilling. 【Features】 ■ Uses polyethylene resin materials ■ Repairs mounting pipes ■ No backfilling required ■ Obtained construction technology review certification in March 2015 *For more details, please refer to the PDF materials or feel free to contact us.

  • Special Construction Method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Sewer Pipe Rehabilitation Method: "Polyethylene Compact Pipe Method"

Sewer Pipe Rehabilitation Method: "Polyethylene Compact Pipe Method"

Rehabilitation methods that address ground deformation caused by earthquakes and bending due to ground subsidence.

The "Polyethylene Compact Pipe Method" involves pulling a C-shaped high-density polyethylene pipe, wound on a drum, into an existing pipe through a manhole. It is restored to a circular shape using steam heating and compressed air, tightly adhering to the existing pipe, and is a method for rehabilitating aging existing pipes. The method is primarily designed for construction with diameters ranging from φ200 to φ350mm. It possesses self-supporting pipe strength and has a high elongation rate of over 350% at the time of fracture, making it capable of accommodating ground deformation and bending caused by earthquakes and ground subsidence. Since the rehabilitation material itself is resistant to breaking and cracking, it is suitable for seismic retrofitting. 【Features of Polyethylene Compact Pipe】 ■ Uses polyethylene that is very stable in quality and environmentally friendly ■ Rehabilitation material that can be used not only for sewer systems but also for water supply systems ■ Easy quality control of materials allows for speedy construction ■ Capable of accommodating ground deformation and bending caused by earthquakes and ground subsidence ■ Has the ability to conform to existing pipes *For more details, please refer to the PDF document or feel free to contact us.

  • Special Construction Method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Concrete Polishing Finish Method "Placon Floor"

Concrete Polishing Finish Method "Placon Floor"

A new idea from "painting and sticking" to "polishing"!

"Placon Floor" is a revolutionary flooring finishing method that directly polishes the concrete substrate. This method polishes the concrete floor to a mirror-like finish, enhancing both the gloss that reflects light and the durability of the floor. Since this method utilizes the existing concrete as is, there is no need for finishing materials. It can be completed in a shorter time frame compared to painted floors, natural stone, or tiles. Additionally, there is no curing period required like with painted floors, allowing for immediate business operations after construction (after polishing). 【Features】 ■ Revolutionary ■ Improved floor durability ■ Significantly reduced construction time ■ Beautiful mirror finish ■ Substantial reduction in total costs *For more details, please refer to the catalog or feel free to contact us.

  • Renovation and repair methods

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Diamond Method Dry Flat Sawing

Diamond Method Dry Flat Sawing

A dry construction method that suppresses dust without using water during cutting! No need for wastewater treatment, significantly reducing the amount of industrial waste!

The method is a technique that adds a dust collection function to a flat sawing machine. Since it does not use cooling water, there is no need for water supply equipment or wastewater treatment. The cutting dust is simultaneously suctioned during cutting, making the processing simple. Additionally, since washing the road surface after cutting is unnecessary, there is no concern about road surface freezing during winter construction. 【Features】 ■ Effective for cost reduction ■ Easy post-processing ■ Can operate with the machine alone ■ Easy cleaning ■ No need for washing the road surface *For more details, please refer to the PDF materials or feel free to contact us.

  • Special Construction Method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Diamond method wire sawing

Diamond method wire sawing

Thick and complex structures can be cut freely in vertical, horizontal, and diagonal directions! Work can be done flexibly in various locations!

"Wire sawing" is a cutting method that involves wrapping a wire with sintered diamond chips around the target object and rotating it at high speed while applying tension. It can be operated remotely and can be used flexibly in various environments such as underwater, at heights, and underground. Additionally, it is capable of cutting special composite materials such as metals and refractory materials. 【Features】 - Capable of cutting large and thick objects without being affected by depth - Generates less noise during building demolition, contributing to noise reduction for nearby areas - Can cut various objects including concrete and rebar - An environmentally friendly method with no pollution - Capable of cutting special composite materials (such as metals and refractory materials) *For more details, please refer to the PDF document or feel free to contact us.

  • Special Construction Method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Dry Diamond Method

Dry Diamond Method

Eliminate wastewater sludge without cooling water! It is possible to prevent accidents caused by wastewater freezing in cold weather operations!

Compared to heavy machinery dismantling, the "diamond method" allows for cutting and drilling with low vibration and low noise, making it widely used in civil engineering and construction projects. However, a new problem has arisen: wastewater sludge from the cooling water used during operations contaminates the surrounding environment. The "dry diamond method" is a new technique that eliminates wastewater sludge while taking advantage of the benefits of the diamond method. In demolition and renovation work, where reducing environmental impact is essential, this method will serve as a guideline for the future. 【Features】 ■ ECO method that eliminates wastewater sludge ■ Low noise and low vibration method ■ Prevents accidents caused by wastewater freezing in cold weather operations ■ No need for post-processing; can be treated directly as industrial waste *For more details, please refer to the PDF materials or feel free to contact us.

  • Special Construction Method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Non-flame metal cutting 'Diamond Method'. An alternative to gas cutting.

Non-flame metal cutting 'Diamond Method'. An alternative to gas cutting.

It is possible to safely cut and dismantle even in environments where gas cannot be used. It can quickly cut large plant equipment, slag from steel mills, and walls made of composite materials containing lead.

Our "Diamond Method" metal cutting technology can cut and drill various materials, from metals to ultra-high reinforced concrete. Large equipment can be cut and dismantled in a short time, and it is easy to extract solidified iron debris. For example, it is widely used in: - Modifications and construction of machinery related to plants - Petrochemical plants - Steel mills and power plants, etc. Dry cutting using air cooling is possible without using cooling water. During cutting, it can be performed without generating open flames, and remote operation is possible, making it a preferred choice for many companies as an alternative to gas cutting. 【Features】 ■ Capable of cutting complex shapes ■ Can cut both metals and ultra-high reinforced concrete ■ Dry cutting using air cooling without the use of cooling water ■ Can be performed without generating open flames during cutting ■ Remote operation is possible, allowing for flexibility in work locations *For more details, please refer to the PDF document or feel free to contact us.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Water jet method chipping device 'JMK-XYZ3000'

Water jet method chipping device 'JMK-XYZ3000'

Efficiently remove resin mortar without damaging the rebar of the expansion device! X-Y movable concrete removal device.

The "JMK-XYZ3000" is a specialized device for removing expansion joints on elevated roads, including highways. It is sized to match the expansion joint section, with a width of 2,100mm and a length of 4,150mm, allowing for efficient work. As it uses a water jet from a high-pressure pump, it can perform ideal removal work without damaging the rebar. 【Features】 ■ A self-propelled device that allows for efficient installation and work, reducing time ■ Flexible adaptation to expansion joint sections positioned at an angle through angle adjustment of the device ■ Exposes a sound substrate without damaging the rebar ■ Width and length adjustments can be made according to the construction site *For more details, please refer to the PDF document or feel free to contact us.

  • Special Construction Method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Water jet method WJ drilling device

Water jet method WJ drilling device

Consideration for structures! It is possible to perform drilling suitable for repair and reinforcement of concrete structures without damaging the rebar!

Water jet cutting can drill into concrete without damaging rebar, allowing for durable repair and reinforcement work that takes structural considerations into account. The hole walls are not smooth like those created by core drilling, but rather have a rough surface, which allows filling materials such as mortar to interlock, ensuring high shear and adhesion performance. Drilling diameters from φ20 to 300mm are possible, and depths of over 5000mm can also be accommodated (based on actual performance data). 【Features】 ■ Can drill into concrete without damaging rebar ■ Takes structural considerations into account ■ Enables durable repair and reinforcement work ■ Hole walls can ensure high shear and adhesion performance ■ Drilling diameters from φ20 to 300mm are possible, with depths of over 5000mm (based on actual performance data) *For more details, please refer to the PDF document or feel free to contact us.

  • Special Construction Method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Water jet method chipping device 'JMK-XYZ2100'

Water jet method chipping device 'JMK-XYZ2100'

Efficiently remove concrete even in narrow areas with a minimum width of 80mm! The dual-axis movable range can be operated remotely!

Introducing the 'JMK-XYZ2100' used in water jet cutting methods. This is a specialized device for removing concrete in narrow areas such as around bridge supports and in play areas. It can remove concrete even in spaces as narrow as 80mm. The two-axis movable range can be operated remotely, allowing for efficient work in a wide area within narrow spaces. 【Features】 ■ Removes concrete in narrow areas such as around bridge supports and in play areas ■ Capable of removing concrete in spaces as narrow as 80mm ■ Two-axis movable range can be operated remotely ■ Allows for efficient work in a wide area within narrow spaces *For more details, please refer to the PDF document or feel free to contact us.

  • Special Construction Method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Water Jet Method Substrate Treatment System "Aqua Hand Blast"

Water Jet Method Substrate Treatment System "Aqua Hand Blast"

Simultaneous collection of waste materials and wastewater! A system with a cleaning width of 140mm that can efficiently perform substrate treatment over a wide area!

Introducing the "Aqua Hand Blast" used in water jet construction methods. A substrate treatment system with a cleaning width of 140mm that efficiently performs surface preparation over a wide area. It allows for simultaneous collection of waste materials and wastewater, enabling wider construction than a hand lance. 【Features】 ■ Substrate treatment system with a cleaning width of 140mm ■ Simultaneous collection of waste materials and wastewater ■ Enables wider construction than a hand lance *For more details, please refer to the PDF document or feel free to contact us.

  • Special Construction Method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Remote coating removal water jet method "DynaBot"

Remote coating removal water jet method "DynaBot"

Achieving high efficiency in paint film stripping work through remote robot construction! Lightweight for easy maintenance! Suitable for removing interior and exterior coatings of various vessels and industrial tanks.

MMJ is a water jet robot that adheres to magnetic surfaces with magnets and can perform remote coating removal. It demonstrates its power in the stripping work of exterior painting of large ships, industrial tank painting, and painting of steel structures. A wireless operator can control the pump's ON/OFF and the winch's drop prevention brake alone, making it suitable for use in explosion-proof required environments. Its simple and lightweight structure also allows for easy maintenance. 【Features】 - Self-spin design with wireless control type, achieving high-efficiency work - Hydraulic drive type capable of vertical movement on walls, overhangs, and horizontal travel - Capable of turning direction at fixed points, allowing for efficient movement - The brake engages when the pump stops, automatically halting the winch's movement *For more details, please refer to the PDF document or feel free to contact us.

  • Special Construction Method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Construction Information] Cutting the floor without using water - Dry Flat Sawing Method

[Construction Information] Cutting the floor without using water - Dry Flat Sawing Method

Dust generated during cutting is also vacuumed up. No need for sludge water treatment!

The method is a technique that adds a dust collection function to a flat sawing machine. Since it does not use cooling water, there is no need for water supply equipment or wastewater treatment. The cutting dust is simultaneously suctioned during cutting, making processing simple. Additionally, there is no need for washing the road surface after cutting, so there is no concern about road surface freezing during winter construction. 【Features】 ■ Effective for cost reduction ■ Easy post-processing ■ Can operate with the machine alone ■ Easy cleaning ■ No need for washing the road surface *For more details, please refer to the PDF materials or feel free to contact us.

  • Special Construction Method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Construction Information] Are you troubled by tire marks? [For factories and warehouses]

[Construction Information] Are you troubled by tire marks? [For factories and warehouses]

We will remove tire marks and slip marks stuck to the floors of factories and warehouses!

"Floor Maintenance P" is a method focused solely on removing tire marks, slip marks, and surface dirt from the floor, achieving a short construction period and low cost! As an option, you can also choose to repair pinholes and minor cracks in the concrete surface, as well as correct unevenness. 【Features】 ■ Revolutionary ■ Significantly reduces construction time ■ Substantial cost reduction ■ Various optional construction choices available *For more details, please refer to the catalog or feel free to contact us.

  • Carports and related materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Construction Information] Substrate treatment methods such as floor leveling and coating removal.

[Construction Information] Substrate treatment methods such as floor leveling and coating removal.

Rotate the diamond disc! Perform removal of various coatings and surface treatment.

We would like to introduce our surface preparation method "Grinding." This method involves surface treatment using a horizontally rotating diamond disc, allowing us to select and utilize various machines and diamonds from a diverse lineup to remove different coatings and perform surface treatments. By combining this with cutting methods and peeling methods, it is possible to finish rough surfaces smoothly. 【Features】 ■ Dust is collected with a vacuum ■ Surface polishing and thin film removal are achieved by rotating the diamond disc ■ Removal of epoxy coatings is possible using special chip blades *For more details, please download the PDF or feel free to contact us.

  • Pavement construction

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to Construction method

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.