Construction method Product List and Ranking from 29 Manufacturers, Suppliers and Companies

[Construction Information] Robot Remote Water Jet Method DynaBot

Leave the dangerous tasks of paint removal and debris removal in confined spaces or high places to robots!

MMJ is a water jet robot that adheres to magnetic surfaces with magnets and can perform remote coating removal. It demonstrates its power in the stripping work of exterior painting of large ships, industrial tank painting, and painting of steel structures. A wireless operator can control the pump's ON/OFF and the winch drop prevention brake alone, making it suitable for use in explosion-proof required environments. Its simple and lightweight structure also makes maintenance easy. 【Features】 - Self-spin design with wireless control type, achieving high-efficiency work - Hydraulic drive type capable of vertical movement on walls, overhangs, and horizontal travel - Capable of changing direction at fixed points, allowing for efficient movement - The brake engages when the pump stops, automatically halting the winch's movement *For more details, please refer to the PDF document or feel free to contact us.

Company：第一カッター興業本社
Price：Other

Special Construction Method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Construction Notice] Water Jet Method for Road Surface Marking Removal

Leave the removal and eradication of markings and coatings on high-performance pavements to our spin jet method!

Introducing the Spin Jet "36-9950-15A/JMK2000-F600-SPIN JET." It can remove lane markings with minimal damage to high-performance pavement surfaces. It is an all-weather model that allows for smooth operation. Additionally, we also offer the double spin jet "SR9665V-14SPIN JET," which enables efficient work within a limited time frame. 【Spin Jet Features】 ■ Capable of removing lane markings with minimal damage to high-performance pavement surfaces ■ All-weather model that allows for smooth operation ■ Simultaneous collection of wastewater and waste materials is possible *For more details, please refer to the PDF document or feel free to contact us.

Company：第一カッター興業本社
Price：Other

Special Construction Method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Construction Information] Drilling can be done without damaging the rebar of the structure.

The power of water can remove only concrete without damaging the rebar and allows for drilling!

Water jet cutting can drill concrete without damaging rebar, allowing for durable repair and reinforcement work that takes the structure into consideration. The hole walls are not smooth like those created by core drilling, but rather have a rough surface, which allows filling materials such as mortar to interlock, ensuring high shear and adhesion performance. Drilling diameters from φ20 to 300mm are possible, and depths of over 5000mm can also be accommodated (based on actual performance). 【Features】 ■ Can drill concrete without damaging rebar ■ Consideration for the structure ■ Enables durable repair and reinforcement work ■ Hole walls can ensure high shear and adhesion performance ■ Drilling diameters from φ20 to 300mm are possible, with depths of over 5000mm (based on actual performance) *For more details, please refer to the PDF document or feel free to contact us.

Company：第一カッター興業本社
Price：Other

Special Construction Method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Construction Information] Flexible cutting regardless of shape or size - Wire Sawing Method

Thick and complex structures can be freely cut in "vertical," "horizontal," and "diagonal" directions! Work can be done flexibly in various locations!

"Wire sawing" is a cutting method that involves wrapping a wire with diamond chips sintered onto it around the target object and rotating it at high speed while applying tension. It can be operated remotely and can be used flexibly in various environments such as underwater, at heights, and underground. Additionally, it is capable of cutting special composite materials such as metals and refractory materials. 【Features】 ■ Can cut thick and large objects without being affected by depth ■ Generates less noise during building demolition, contributing to noise reduction for nearby areas ■ Capable of cutting various objects, including concrete and rebar ■ An environmentally friendly method with no pollution ■ Can also cut special composite materials (such as metals and refractory materials) *For more details, please refer to the PDF document or feel free to contact us.

Company：第一カッター興業本社
Price：Other

Special Construction Method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Construction Information] Cutting the floor without using water - Dry Flat Sawing Method

Dust generated during cutting is also vacuumed up. No need for sludge water treatment!

The method is a technique that adds a dust collection function to a flat sawing machine. Since it does not use cooling water, there is no need for water supply equipment or wastewater treatment. The cutting dust is simultaneously suctioned during cutting, making processing simple. Additionally, there is no need for washing the road surface after cutting, so there is no concern about road surface freezing during winter construction. 【Features】 ■ Effective for cost reduction ■ Easy post-processing ■ Can operate with the machine alone ■ Easy cleaning ■ No need for washing the road surface *For more details, please refer to the PDF materials or feel free to contact us.

Company：第一カッター興業本社
Price：Other

Special Construction Method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Construction Information] Are you troubled by tire marks? [For factories and warehouses]

We will remove tire marks and slip marks stuck to the floors of factories and warehouses!

"Floor Maintenance P" is a method focused solely on removing tire marks, slip marks, and surface dirt from the floor, achieving a short construction period and low cost! As an option, you can also choose to repair pinholes and minor cracks in the concrete surface, as well as correct unevenness. 【Features】 ■ Revolutionary ■ Significantly reduces construction time ■ Substantial cost reduction ■ Various optional construction choices available *For more details, please refer to the catalog or feel free to contact us.

Company：第一カッター興業本社
Price：Other

Carports and related materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Construction Information] Substrate treatment methods such as floor leveling and coating removal.

Rotate the diamond disc! Perform removal of various coatings and surface treatment.

We would like to introduce our surface preparation method "Grinding." This method involves surface treatment using a horizontally rotating diamond disc, allowing us to select and utilize various machines and diamonds from a diverse lineup to remove different coatings and perform surface treatments. By combining this with cutting methods and peeling methods, it is possible to finish rough surfaces smoothly. 【Features】 ■ Dust is collected with a vacuum ■ Surface polishing and thin film removal are achieved by rotating the diamond disc ■ Removal of epoxy coatings is possible using special chip blades *For more details, please download the PDF or feel free to contact us.

Company：第一カッター興業本社
Price：Other

Pavement construction

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Construction Information] Cutting method for floors, floor slabs, and pavements can cut up to a maximum of 800mm.

The diamond blade rotates at high speed, cutting vertically through roads and floors!

We would like to introduce our diamond cutting method, "Flat Sawing." This efficient method allows for quicker cutting of horizontal surfaces such as floors, slabs, and pavements. It ensures reliable cutting work in a wide range of scenarios, from the installation of telephone, electrical, gas, and water pipes to the renovation of water supply and drainage systems, road repairs, joint cutting, and slabs. 【Features】 ■ Capable of cutting depths up to 800mm ■ Can also perform snow-melting groove cutting with a cutting width of 50mm ■ Cutting can be done with both electric (suitable for indoor work as it produces no exhaust emissions) and engine-powered equipment ■ Wet or dry cutting can be selected based on the site conditions ■ Cutting of materials other than floors (such as concrete precast products) is also possible. *Please inquire for details. *For more information, please download the PDF or feel free to contact us.

Company：第一カッター興業本社
Price：Other

Concrete construction

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

COMPASS Method (Ground Cutting and Box-Type Pushing)

Non-excavation methods for constructing small cross-section structures.

The COMPASS Method TYPE 3 (Ground Cutting and Box Tunneling) is a non-excavation method used for the construction of small cross-sectional structures such as rivers and sidewalks that cross under roads and railways. To insert the roof of the cutting head into the cutting groove (the space created by the ground cutting wire scraping the ground) in front of the cutting head body, it is possible to prevent excessive soil intake and the uplift of obstacles caused by the cutting head, thereby minimizing the impact on the ground above. 【Features】 ■ Safety ■ Workability ■ Cost-effectiveness *For more details, please refer to the PDF materials or feel free to contact us.

Company：鉄建建設
Price：Other

Concrete construction

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

HEP&JES method

Non-excavation underpass construction method using elements with JES joints.

The HEP&JES (High Speed Element Pull & Jointed Element Structure) construction method, developed in collaboration with JR East, is a rational construction technique for cross-sectional structures that combines the non-excavation HEP (High Speed Element Pull) method for pulling and laying elements with the JES (Jointed Element Structure) method, which uses steel elements as the main structural components. This method has been adopted in projects for grade separations under railways and highways, and as of May 2024, it has accumulated over 160 orders. We propose the HEP&JES method as a safe, short-term, and low-cost solution for eliminating level crossings and improving intersections aimed at urban regeneration. **Features** - Since the inserted elements are used directly as the main structural components, insertion work is completed in one go, minimizing the impact on tracks and road surfaces. - Various shapes of structures can be constructed without being limited by structural length. - The method allows for precise construction as elements are pulled from the target point on the arrival side. - Since the pulling reaction force is taken by the retaining wall on the arrival side, there is no need for reaction force equipment on the starting side. *For more details, please refer to the PDF materials or feel free to contact us.*

Company：鉄建建設
Price：Other

Concrete construction

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Eco Recharge® Method

Enabling large-volume ascites with a small diameter!

The Eco Recharge® method (circular groundwater control method) is a technique aimed at lowering groundwater levels by pumping groundwater and injecting it back into the ground using the latest technology. By eliminating excess water, it significantly reduces construction costs. Groundwater pumped from deep wells and other pumping wells is first sent to a sand separator. Here, impurities such as sand contained in the groundwater are removed, and then it is sent to a receiving tank. By controlling the injection pump to maintain a constant water level in the receiving tank, groundwater is pumped into the ground from the injection well without excess or deficiency. 【Features】 ■ Economic efficiency ■ Environmental conservation ■ Safety *For more details, please refer to the PDF document or feel free to contact us.

Company：鉄建建設
Price：Other

Concrete construction

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Small-diameter pumping method

Achieving small diameter and high lift drainage!

The small-diameter pumping method is a technique used to lower groundwater levels by pumping in areas with high groundwater levels. This method generates negative pressure by sending a jet fluid (water or air) to an ejector installed at the well's tip, allowing for groundwater extraction. Since there is no need for a submersible pump inside the well, the drilling diameter can be smaller and more economical compared to traditional deep well methods. Additionally, it can handle higher lift compared to well point methods. 【Features】 ■ Excellent applicability: It can pump groundwater at depths where well point methods are ineffective and in soils with lower permeability coefficients than those used in deep well methods. ■ Cost-effectiveness: By not installing a submersible pump inside the well, the drilling diameter can be reduced compared to deep well methods. ■ Usability: Since the equipment is located above ground, maintenance is easy. *For more details, please refer to the PDF materials or feel free to contact us.

Company：鉄建建設
Price：Other

Concrete construction

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

KK tile sheet method

No need for surface roughening work! Overwhelming adhesion, prevents exterior wall tiles from peeling off, and creates a uniform surface with consistent texture!

The "KK Tile Sheet Method" only requires attaching and removing from the formwork, so there is no need for specialized machinery, equipment, or qualified technicians required for high-pressure washing. We have obtained certification from the Building Materials Testing Center (a public interest incorporated foundation) that our tensile adhesive strength meets the standards of the Architectural Institute of Japan and the JASS19 regulations. 【Advantages】 - Both sides are embossed, allowing use on either side. - Forms a homogeneous concrete underside with the necessary performance. - Enables direct installation of wall tiles, resulting in low cost and shorter construction time. - No need for specialized machinery or qualified technicians. - No need for preparation of drainage channels or splash prevention, and no generation of contaminated water, which improves the working environment and helps preserve the surrounding environment (rivers, seas, forests). 【Features】 (compared to conventional methods) - Improved adhesion strength. - Can be installed by ordinary workers. - No need for surface roughening. - No release agent required, minimal slurry adhesion. - No noise, dust, or contaminated water generation. *For more details, please refer to the related links or feel free to contact us.

Company：協立エンジ
Price：Other

Wood panel and frame wall construction

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Construction method Product List and Ranking from 29 Manufacturers, Suppliers and Companies

Construction method Manufacturer, Suppliers and Company Rankings

Construction method Product ranking