List of Civil Engineering products
- classification：Civil Engineering
2656～2700 item / All 8022 items
No worries even if obstacles appear! The ultimate mud-based propulsion method equipped with special features.
- Site and ground investigation
- Civil Engineering Method
- Special Construction Method
Immediately after departure, excavate the stone masonry wire cage and tetrapod section of about 20 meters!
- Site and ground investigation
- Civil Engineering Method
- Special Construction Method
All-rounder in construction work! A case study of cutting φ1800 concrete pipes!
- Site and ground investigation
- Civil Engineering Method
- Special Construction Method
All-rounder for construction work! A case study of cutting steel sheet piles Type III at two locations!
- Site and ground investigation
- Civil Engineering Method
- Special Construction Method
All-rounder of construction work! A case study of cutting steel sheet piles Type III!
- Site and ground investigation
- Civil Engineering Method
- Special Construction Method
All-rounder in construction work! A case study of soil cutting for an inserted caisson.
- Site and ground investigation
- Civil Engineering Method
- Special Construction Method
All-rounder in construction work! A case study of cutting H-beams in two locations.
- Site and ground investigation
- Civil Engineering Method
- Special Construction Method
All-rounder in construction work! A case study of cutting three PC piles with a diameter of 250mm.
- Site and ground investigation
- Civil Engineering Method
- Special Construction Method
Cutting examples of ultra-soft soil! Use of connectable synthetic pipes, equipped with a meandering correction device for the tunneling machine.
- Site and ground investigation
- Civil Engineering Method
- Special Construction Method
Cutting of Storage Steel Sheet Pile Type III! Construction Case in Areas Where Road Regulations are Difficult.
- Site and ground investigation
- Civil Engineering Method
- Special Construction Method
It's not surprising if anything comes out; the entire site is an example of land reclamation excavation.
- Site and ground investigation
- Civil Engineering Method
- Special Construction Method
We exhibited at the Sewerage Exhibition '18 in Kitakyushu City, Fukuoka Prefecture!
＊＊＊＊＊＊＊ Exhibition at the Sewerage Exhibition ＊＊＊＊＊＊＊＊ Yasuda Engineering showcased the underground obstacle-responsive mud slurry thrusting method, featuring the milling mole method and the JET method, which uses CCD camera sensors to instantly measure the position of the tunneling machine on sharp curves! 【Exhibited Products】 ■ Underground Obstacle-Responsive Mud Slurry Thrusting Method The milling mole method is used in urban development and safely carries out thrusting work by cutting through and penetrating obstacles that remain underground. It can detect obstacles ahead of the thrusting excavation and discharge them as cutting powder of about 1 cm, and if necessary, it allows for chemical injection from within the machine and guidance of the tunneling machine using GPS. ■ JET Method The JET method uses CCD camera sensors to instantly measure the position of the tunneling machine on sharp curves. It enables long-distance and sharp curve construction in small-diameter thrusting. By using a dedicated pump tube and lubricant injection pipe for the JET method, it reduces the load on the pipe, allowing for long-distance thrusting even with small diameters. It is the most excellent all-around thrusting method that does not limit construction locations due to internal measurements.
[NETIS Registered] No worries even if obstacles appear! A construction method that is starting to be chosen nationwide! Compatible with diameters from φ800 to 3000 mm.
- Site and ground investigation
- Civil Engineering Method
- Special Construction Method
The milling mall method is safe even when obstacles appear! A thrust method chosen nationwide, compatible with diameters from φ800 to 3000 mm. *Registered with NETIS.
- Site and ground investigation
- Civil Engineering Method
- Special Construction Method
It is possible to cut through obstacles and achieve long-distance propulsion! The milling mole method is reliable even when obstacles arise and is a preferred propulsion method nationwide!
- Site and ground investigation
- Civil Engineering Method
- Special Construction Method
Leave the construction of long-distance and sharp curves in small-diameter tunneling to the jet method! 《Presenting a collection of construction achievements!》
- Sewerage facilities
- Waste treatment facilities
- Site and ground investigation
[NETIS Registered] No worries even if obstacles appear! Compatible with φ800 to 3000 mm. *Exhibited at the 2018 Kitakyushu Sewerage Exhibition!
- Site and ground investigation
- Civil Engineering Method
- Special Construction Method
We will be exhibiting a panel at the Construction Technology Fair 2018 in Chubu from October 17 (Wednesday) to October 18 (Thursday).
Yasuda Engineering Co., Ltd. will be exhibiting a panel at the "Construction Technology Fair 2018 in Chubu," which will be held from October 17 (Wednesday) to October 18 (Thursday), 2018! This event provides a platform for technical exchange among industry, academia, and government, promoting technological development and the introduction of new technologies, while introducing the current status and direction of technology development to students majoring in the construction field. It is also an exhibition that widely presents the appeal of construction technology and the necessity of social infrastructure development to the general public. Our company will showcase the ultimate thrusting method, the "Milling Mole Method," equipped with four special functions (exploration, improvement, cutting, and guidance) that ensure safety even in the presence of obstacles. Please be sure to check out our panel display! We look forward to your visit.
We have showcased the "Underground Obstacle Response Type Mud Density Propulsion Method" that no longer fears obstacles!
- Site and ground investigation
- Civil Engineering Method
- Special Construction Method
[Performance Collection Available] No worries even if obstacles appear underground! We detect and cut obstacles located about 2 meters ahead of the tunneling machine!
- Site and ground investigation
- Civil Engineering Method
- Special Construction Method
It is possible to directly reach the existing shield through the application of metal cutting technology! We are currently presenting examples of construction where direct cutting was performed on exi...
- Special Construction Method
- Sewerage facilities
Notice of the 44th "Latest Construction Method and Technology Training Seminar"
Yasuda Engineering Co., Ltd. will conduct a seminar at the 44th "Latest Construction Techniques for Propulsion Methods" held in Tokyo and Osaka. We will report on our new initiatives utilizing the steel obstacle cutting function of the milling mole method. This seminar is certified as a "Continuing Education (CPD) Program" by the Japan Society of Civil Engineers. (CPD credits: 6.5) We sincerely look forward to your attendance. [Overview] ■ Seminar Time: 14:55 - 15:50 ■ Seminar Content: Challenging New Areas with the Milling Mole Method - New Initiatives Utilizing the Steel Obstacle Cutting Function - *For information on how to apply, please refer to [Details and Application].
We conducted a comprehensive evaluation and overall assessment of the methods for dealing with obstacles in the construction method, considering aspects such as estimated construction period, estimate...
- Special Construction Method
- Sewerage facilities
Leave the construction of long distances and sharp curves in small-diameter propulsion to the jet method!
- Sewerage facilities
- Waste treatment facilities
- Site and ground investigation
We exhibited at the Sewerage Exhibition '18 in Kitakyushu City, Fukuoka Prefecture!
＊＊＊＊＊＊＊ Exhibition at the Sewerage Exhibition ＊＊＊＊＊＊＊＊ Yasuda Engineering showcased the underground obstacle-responsive mud slurry thrusting method, featuring the milling mole method and the JET method, which uses CCD camera sensors to instantly measure the position of the tunneling machine on sharp curves! 【Exhibited Products】 ■ Underground Obstacle-Responsive Mud Slurry Thrusting Method The milling mole method is used in urban development and safely carries out thrusting work by cutting through and penetrating obstacles that remain underground. It can detect obstacles ahead of the thrusting excavation and discharge them as cutting powder of about 1 cm, and if necessary, it allows for chemical injection from within the machine and guidance of the tunneling machine using GPS. ■ JET Method The JET method uses CCD camera sensors to instantly measure the position of the tunneling machine on sharp curves. It enables long-distance and sharp curve construction in small-diameter thrusting. By using a dedicated pump tube and lubricant injection pipe for the JET method, it reduces the load on the pipe, allowing for long-distance thrusting even with small diameters. It is the most excellent all-around thrusting method that does not limit construction locations due to internal measurements.
All-rounder in construction work! Examples of cutting through 1m thick reinforced concrete walls, etc.
- Site and ground investigation
- Civil Engineering Method
- Special Construction Method
It has been adopted for construction where there is a possibility of wooden stakes with a diameter of 300 mm existing in the pipeline section.
- Site and ground investigation
- Civil Engineering Method
- Special Construction Method
Cutting unexpected H-beams in six locations! A case study of construction work for thrusting on a heavily trafficked main road.
- Site and ground investigation
- Civil Engineering Method
- Special Construction Method
A propulsion method equipped with four special functions: exploration, improvement, cutting, and guidance! Presentation of construction achievement collection!
- Site and ground investigation
- Civil Engineering Method
- Special Construction Method
![[Construction Results Presentation]...](https://image.www.ipros.com/public/product/image/ebd/2000375459/IPROS1368216273853392078.jpg?w=280&h=280){kind=small}
Removal and discharge of a φ1800mm Hume pipe! A pushing method that ensures safety even in the presence of obstacles!
- Site and ground investigation
- Civil Engineering Method
- Special Construction Method
We held a panel exhibition at the Construction Technology Fair 2018 in Chubu from October 17 (Wednesday) to October 18 (Thursday), 2018!
Yasuda Engineering Co., Ltd. held a panel exhibition at the "Construction Technology Fair 2018 in Chubu," which took place from October 17 (Wednesday) to October 18 (Thursday), 2018! This exhibition provides a platform for technical exchange among industry, academia, and government, promotes technological development and the introduction of new technologies, introduces students majoring in construction to the current status and direction of technological development, and widely presents the appeal of construction technology and the necessity of social infrastructure development to the general public. Our company showcased the ultimate thrusting method, the "Milling Mole Method," equipped with four special functions (exploration, improvement, cutting, and guidance) that ensure safety even in the presence of obstacles.
[NETIS Registered] No worries even if obstacles arise! A construction method that is starting to be chosen nationwide! Compatible with diameters from φ800 to 3000 mm.
- Site and ground investigation
- Civil Engineering Method
- Special Construction Method
Many achievements in the domestic market. Leveraging domestic experience, expanding overseas! "Currently offering domestic construction achievements as a gift."
- Site and ground investigation
- Civil Engineering Method
- Special Construction Method
[Performance Collection Available] No worries even if obstacles appear underground! We detect and capture obstacles about 2 meters ahead of the tunneling machine and cut through them!
- Site and ground investigation
- Civil Engineering Method
- Special Construction Method
![[Video Available] Measures against ...](https://image.www.ipros.com/public/product/image/cc1/2000429532/IPROS18358409666108027113.png?w=280&h=280){kind=small}
No worries if obstacles appear underground! The tunneling machine detects and captures obstacles about 2 meters ahead, allowing for cutting of the obstacles! [Performance report available]
- Site and ground investigation
- Civil Engineering Method
- Special Construction Method
![[Video Available] Connect to existi...](https://image.www.ipros.com/public/product/image/222/2000429534/IPROS13724477372724745348.png?w=280&h=280){kind=small}
No need to worry about obstacles underground! The tunneling machine detects and captures obstacles about 2 meters ahead and cuts through them! [Collection of achievements available]
- Site and ground investigation
- Civil Engineering Method
- Special Construction Method
The advancement construction method often faces many challenges during the excavation process. Here are examples of how those problems were solved!
- Special Construction Method
- Sewerage facilities
First construction technology review certification obtained for permeable materials! This combines two types of liquid agents: insoluble silicate-based impregnants and silicone-based (silanes) impregn...
- Foundation construction
I don't know where to ask for help. Cell Nets, specializing in Excel, will quickly fix your unmodifiable Excel system.
- Foundation construction
The small daily source of stress, the errors, has been resolved. I can now work with peace of mind.
- Foundation construction
Attention customers considering new implementation or switching! We offer road earthwork design plans and bridge substructure design plans. Our company also supports application forms and creation ass...
- Architectural Design Software
- Earthworks
Detects people and obstacles with ultrasonic sensors, providing early warnings to prevent vehicle collisions!
- Safety and consumables
- Tunnel construction
Traffic safety measures near the entrance and exit of the work site!
- Safety and consumables
- Tunnel construction
Environmentally friendly stripping agent with minimal ecological impact! Neutral water-based stripping agent ECO "STRIPPER"
- Bridge Construction
- paint
- Steel structure construction
We examined the effectiveness of the corrosion-resistant coating "Earthcoat Rust Conversion Coating System," which is highly resistant to salt damage! We analyzed the condition of the steel coated on ...
- paint
- Bridge Construction
- Steel structure construction
Water-based paint strippers for civil engineering steel structures that have extremely low ecological impact and excel in environmental conservation and safety.
- Bridge Construction
- paint
- Steel structure construction
A collection of videos showing the coating removal work using STRPPER.
- Bridge Construction
- paint
- Steel structure construction
Q&A for the corrosion-resistant coating system "Earth Coat Anti-Rust - Coating System" with excellent salt damage resistance.
- paint
- Steel structure construction
- Bridge Construction
"STRIPPER" is an environmentally friendly stripping agent with very little ecological impact, designed for high safety in anticipation of unexpected guerrilla rainstorms and linear precipitation bands...
- Steel structure construction
- Rust Inhibitor
- Bridge Construction
Protects the grass from the pressure of vehicles, allowing for the creation of beautiful green parking lots and squares.
- Aggregates and crushed stone
- Paving of sidewalks, roads, parking lots and stadiums
- stone