"Repairing dents in the parking lot" Partial repairs during spare time before it becomes a complaint.
Denting Flat Craftsman
Even beginners can easily perform high-intensity partial repairs. It takes about an hour from preparation until the car can pass through!
Dents and uneven surfaces in parking lots can lead to complaints. - The car's body or tires were damaged. - Someone tripped and got injured. - The area where people get out was soaked due to a puddle. - It's difficult to pass through with a wheelchair because of the bumps. Even if it doesn't lead to complaints, it can naturally deter customers... Before that happens! For first-time users, the "Denture Flat Artisan" product allows you to easily and independently repair dents and uneven surfaces. When you hire a contractor, the parking lot may be unusable for an entire day, but with the Denture Flat Artisan, it takes about an hour from the start of construction to hardening (the hardness required for vehicles to pass), minimizing the impact. [How to use] 1. Clean the area to be repaired (sweep out sand and debris as much as possible). 2. Pour the liquid agent into the bag containing the aggregate and mix it together. (Twisting the opening of the bag while mixing increases its sealability.) 3. Pour the mixed material into the repair area. 4. Use a trowel or similar tool to level it out. (It becomes easier to smooth out after it has set for a little while.) 5. Wait until it hardens for about 40 minutes, and it's complete.
Inquire About This Product
basic information
【Product Overview】 *Same as black and gray 1 box contains 4 sets (4 sets of aggregate + hardener (liquid resin)) Weight: Approximately 20kg (about 5kg per set × 4 sets) 【Repairable Area Estimate】 1m × 1m × 2.5mm (per set) *One box can repair an area of 1 square meter to a thickness of 1cm. *Maximum curing thickness: 10cm 【Strength】 Compressive strength: 22-23 (N/mm²) *minimum 4 (N/mm²) Flexural strength: 8 (N/mm²) *maximum 15 (N/mm²) Adhesive strength: 1.5-1.6 (N/mm²) *minimum 1 (N/mm²) *Values indicated are desired strength levels 【Curing Time】 Approximately 40 minutes after mixing *Effectiveness time may vary depending on the season. *Effectiveness time is shorter in summer. 【Application Conditions】 Please remove dirt from the repair area before application. If water is pooled in the application area, it will not solidify properly. *It can be applied if it is slightly damp. The surface temperature of the application area should be between 5℃ and 60℃.
Price information
18,000 yen per box (excluding tax)
Price range
P2
Applications/Examples of results
【Frequently Used Repair Areas】 Customer parking lot / Employee parking lot Deterioration and damage of the slope at the factory entrance (especially in areas where heavy machinery enters and exits) Damage and unevenness of the factory floor Dents and cracks in the roadway and sidewalk
Line up（2）
| Model number | overview |
|---|---|
| Hekomi Flat Artisan Black | Color for asphalt and similar parking lots: black |
| Hekomi Flat Artisan Gray | Color for cement and concrete: gray |
catalog（1）
Download All Catalogs
Company information
Since its establishment in 1937 (Showa 12), Yachiyo Micro Science has been a specialized trading company for grinding and polishing materials, while also continuously engaging in product development related to grinding and polishing through its research and development department. We also operate the technical information sites "Grinding and Polishing .COM" and "Aglutinants .COM." Please take a look.