Partial repair of the parking lot with 'Dimple Flat Artisan Gray (with construction set)'
Repairs for dents and uneven surfaces in asphalt and similar materials will be completed in one hour!
Mixing two materials together and pouring them into holes and uneven areas to level the surface completes the partial repair. The time from mixing the materials to hardening is about 1 hour! You can repair during the time before opening or during lunch breaks, and by the time you start operations, it will have hardened to a level that vehicles can pass. Hekomi Flat Takumi Gray is suitable for repairing concrete parking lots, ramps, etc. 【Instructions】 1. Clean the area to be repaired (sweep out sand and debris as much as possible). 2. Add the liquid agent to the bag containing the aggregate and mix them together. (Twisting the opening of the bag while mixing increases its sealability.) 3. Pour the mixed material into the area that needs repair. 4. Use a trowel or similar tool to level it out. (It becomes easier to smooth after it has set for a little while.) 5. Wait for about 40 minutes until it hardens, and it's complete. *To keep the repair area clean and prevent splatter marks, it is recommended to surround the area with masking tape before performing the repair for a neat finish.
Inquire About This Product
basic information
【Product Overview】 *Same as Black and Gray 1 box contains 4 sets (4 sets of aggregate + hardener (liquid resin)) Weight: Approximately 20kg (about 5kg per set × 4 sets) 【Repairable Area Estimate】 1m × 1m × 2.5mm (per set) *1 box can repair an area of 1 square meter to a thickness of 1cm. *Maximum curing thickness: 10cm 【Strength】 Compressive strength: 22-23 (N/mm²) *minimum 4 (N/mm²) Flexural strength: 8 (N/mm²) *maximum 15 (N/mm²) Adhesive strength: 1.5-1.6 (N/mm²) *minimum 1 (N/mm²) *Values are desired strength specifications 【Curing Time】 Approximately 40 minutes after mixing *Effect time may vary by season. *Effect time is shorter in summer. 【Application Conditions】 Please remove dirt from the repair area before application. If there is standing water in the application area, it will not set properly. *It can be applied if it is slightly damp. The surface temperature of the application area should be between 5℃ and 60℃.
Price range
P2
Applications/Examples of results
Frequently used repair areas: Damage to customer parking lot and employee parking lot, uneven surfaces, ramp repairs.
Company information
Since its establishment in 1937 (Showa 12), Yachiyo Micro Science has been a specialized trading company for grinding and polishing materials, while also continuously engaging in product development related to grinding and polishing through its research and development department. We also operate the technical information sites "Grinding and Polishing .COM" and "Aglutinants .COM." Please take a look.
