Palm-sized Mirable automatic faucet integrated energy-saving electric instant water heater.
Ultra-compact [Energy-saving] Electric Instant Water Heater EIXM Series - Mirable Automatic Faucet Model
Ultra-fine bubble generation automatic faucet integrated with "cleaning power" while achieving "76% cost reduction compared to conventional electric water heaters," ultra-compact energy-saving electric instant water heater.
A clean revolution for daily handwashing! This collaboration between Science Co., the top manufacturer of ultra-fine bubble generating showerheads, and Japan Itomic, the number one supplier of electric instantaneous water heaters in the domestic market. The "Mirable Automatic Faucet" was developed in collaboration with Science Co., the leading manufacturer of ultra-fine bubble generating showerheads. In handwashing facilities commonly used in toilets and washrooms, "automatic faucets" have become standard. Utilizing the characteristics of ultra-fine bubbles in the water flow, it incorporates cleaning and moisturizing capabilities. Additionally, the water dispensed is adjustable between 20°C and 38°C. The ultra-compact electric instantaneous water heater manufactured by Japan Itomic makes handwashing comfortable even during harsh winters, and unlike conventional electric water heaters, it only uses the necessary power to heat the water instantly. By leveraging the strengths of both companies, energy savings have also been achieved. Compared to conventional electric water heaters, running costs have been reduced by 76%.
Inquire About This Product
basic information
This product is a compact electric instantaneous water heater integrated with an automatic faucet. The outlet of the automatic faucet is equipped with an ultra-fine bubble generation mechanism, and when you place your hand near the faucet, it starts to dispense fine bubble water at a suitable "lukewarm" temperature for handwashing. Please note that this product only dispenses fine bubble water and does not provide straight water flow. Product Features: ● Ultra-fine bubbles that come out immediately when you place your hand near the faucet. ● A set of electric instantaneous water heater that only uses electricity during water dispensing and an automatic faucet. ● An optimal water flow rate of 0.8 to 1.4 liters per minute for handwashing. ● Easy installation by simply connecting to a power outlet and water supply (no drainage installation required). ● The power supply can be used with single-phase 100V at 15A. For commercial use, single-phase 200V is also available. ● Temperature can be adjusted in 1°C increments from 20°C to 38°C. (The 200V model can be set from 20°C to 45°C. If a higher temperature is desired, please choose the 200V option.) For specifications, please refer to the lineup list. This product may not maintain the set temperature if the water supply temperature drops and the flow rate exceeds the heating capacity. Please check the available temperature settings for each season in advance.
Price information
Suggested retail price: 258,000 yen (excluding tax) *Additional installation costs will be required. For installation, please consult a plumbing or electrical contractor or a construction company.
Price range
P3
Delivery Time
P3
※Scheduled for release on April 1, 2024.
Applications/Examples of results
Office buildings, elderly care facilities, beauty and hairdressing, esthetics, hospitals, plastic surgery, kitchens, commercial facilities, stores, general residences.
Detailed information
-
Even compared to a 500ml plastic bottle, it's like this. An ultra-compact electric instant water heater that fits in a woman's hand.
-
The ultra-fine bubble that sprays water immediately when you wave your hand. The usage flow rate is 0.8 to 1.4 liters per minute, and the water pressure used is 0.15 to 0.75 MPa.
-
The energy-saving performance is reduced by 76% compared to conventional machines.
-
The electric instantaneous water heater is equipped with Itomic's unique FFB control. By installing temperature sensors not only on the water supply side but also on the hot water side, we have further corrected the error and achieved stability in the hot water temperature. 【FFB Control Image】 1. The temperature and flow rate changes are detected by the temperature sensor and flow rate sensor on the water supply side, and before the water passes through the heater, the microcontroller calculates the appropriate heating amount based on the water temperature and flow rate. 2. In the case of unstable hot water temperature due to fluctuations in voltage during normal operation, the temperature sensor on the hot water side detects this, and by applying corrections with the microcontroller, we achieve even higher precision in stabilizing the hot water temperature.
-
Dimension drawing
-
Maximum outlet water temperature graph 0.9L/min *If the usage flow rate increases, the temperature may not be maintained, so please adjust it to 0.9L/min using the shut-off valve on the primary side. *In winter or when the supply water temperature decreases, the possible outlet temperature may drop, and it may not be able to maintain the set temperature.
-
Hot water supply capacity graph (at water supply temperature of 15°C)
Line up（2）
| Model number | overview |
|---|---|
| EIXM112A0-FB (Mirable Automatic Faucet Set) | Power Supply: Single-phase 100V 1.25kW, Power Plug: NEMA 5-15, Cord Length: 1m, Water Supply Connection: G1/2 male thread, Adjustable Temperature: 20~38℃ (Factory Setting: 32℃) |
| EIXM225A0-FB (Mirable Automatic Faucet Set) | Power Supply: Single-phase 200V 2.5kW, Power Plug: NEMA L6-20, Cord Length: 1m, Water Supply Connection: G1/2 male thread, Adjustable Temperature: 20~45℃ (Factory Setting: 37℃) |
catalog（2）
Download All Catalogs
News about this product（2）
Company information
Does your company not have a break room? The water heater used there might be one of our products. We, Japan Itomic, have been dedicated to the research and development of water heaters for over 70 years since our founding. Initially, we were a manufacturer dealing with gas water heaters, but one day, we heard during a business meeting that "the water in a pot cools down," which led us to start developing electric water heaters. We have received recognition for their superior safety and convenience compared to gas water heaters, earning the trust of various industries and organizations. At Japan Itomic, professionals who are well-versed in water heating propose the most suitable water heating systems for every situation. From product development to manufacturing, sales, after-sales service, and replacement installation, we provide a one-stop solution, delivering a safe and comfortable environment with "warm water." 【Itomic Product Support】~For long-lasting use~ Japan Itomic, specializing in commercial electric water heaters, offers reliable after-sales service 24 hours a day, 365 days a year to respond to sudden equipment failures during operations. Additionally, to ensure that customers can use our water heating solutions with peace of mind for a long time, we provide a three-year warranty on electric water heaters and commercial eco-cute systems.
![Water-saving automatic faucet integrated ultra-compact [energy-saving] electric instant water heater EIXM](https://image.www.ipros.com/public/product/image/b80/2001133088/IPROS8009551035200480274.jpg?w=280&h=280)
