If the opening does not match, it's not a problem. Here is an example of replacing a ventilation fan attached to the ceiling with the BF-261RGA!
To customers considering the installation of a bathroom ventilation drying heating unit with a graphite heater. We would like to introduce a case of replacing the ceiling-mounted type "BF-261RGA" bathroom ceiling fan. The installation time is approximately 2 hours. *Please note that this may vary depending on the site conditions. 【Installation Steps】 (1) Confirm the installation location (2) Remove the existing ventilation fan - 1 (3) Remove the existing ventilation fan - 2 (4) Expand the opening (5) Connect the exhaust duct (6) Secure the duct connection (7) Install the main unit - 1 (8) Install the main unit - 2 (9) Set the direction of warm air discharge (10) Attach the front panel (11) Complete installation and test run *For more details, please refer to the PDF document or feel free to contact us.
Inquire About This Product
basic information
【Details of Construction Procedure】 (1) Check measurements to see if installation is possible at the location of the existing ventilation fan. (2) Turn off the breaker and remove the panel of the existing ventilation fan. (3) Disconnect the electrical wiring and remove the main body of the ventilation fan. (4) If the opening is small, enlarge the opening. (5) Connect the exhaust duct to the duct connection port. (6) Secure the duct connection port to the ceiling edge on the exhaust side with screws. (7) Wire the power and ground, installing according to the misconnection prevention guide. (8) While holding the main body, secure it to the ceiling with fixing screws. (9) Adjust the direction of the airflow to face the washing area of the bathroom. (10) Secure the panel. (11) Installation complete; perform trial operation. *For more details, please refer to the PDF document or feel free to contact us.
Price range
Delivery Time
Applications/Examples of results
For more details, please refer to the PDF document or feel free to contact us.
catalog（1）
Download All Catalogs
Bathroom ventilation drying heating unit "BF-RG series"
Company information
Our company consistently handles everything in-house, from product planning and development to product design and prototyping, mold design and manufacturing, molding and processing, assembly and inspection, quality assurance and management, sales and logistics, and maintenance services. As a result, the know-how we have cultivated over the years is directly applied to product development and is reflected in the creation of products that meet the needs of the times. Our ability to quickly reflect issues and improvements in product development and product enhancement, along with our continuous "TMC Cycle," is our strength. Furthermore, we are committed to domestic production (Made in Japan of trust) to ensure a stable supply of high-quality products. The rapid and meticulous responsiveness that we can achieve by handling everything in our domestic factories is our greatest characteristic. To "contribute to the creation of comfortable living spaces," "Takasusangyo" will continue to evolve daily to provide better living environments. Please feel free to contact us with any requests.