16-bit input + 16-bit output expansion I/O board 'MPC-RAS32IO-V2' developed for Raspberry Pi.
The output signal and input signal are isolated by a phot coupler, and the withstand voltage of the external power supply for output is a maximum of 36V. The communication protocol can be selected between I2C or SPI. The input signal is turned on/off by the current flowing through the phot coupler. ◆ Features Input Section ◎ Wide Input Voltage Range The voltage of the input signal can be specified as 5V, 12V, 24V, or 36V, which will be set at the time of shipment. Output Section ◎ High Voltage and High Output Current The output section covers a wide voltage range from 5V to 36V using FETs. The power supply is provided externally. Common Section ◎ Isolation from External Sources The internal circuit is electrically isolated from the external circuit by the phot coupler, preventing malfunctions and electrical damage caused by abnormal voltages, noise, or ground level fluctuations from outside. ◎ Board Size Same size as Raspberry Pi 3 MODEL-B and Raspberry Pi 2 MODEL-B. ◎ Connection with Raspberry Pi Connect to the 40-pin (GPIO) of the Raspberry Pi and communicate via I2C or SPI. ◎ When connecting to the 40-pin connector of the Raspberry Pi, an MPC-RASST may be required as an intermediary board.
Inquire About This Product
basic information
Input points: 16 bits Input resistance: 5V/12V = 2.2KΩ, 12V/24V = 4.7KΩ, 24V/36V = 12KΩ Output points: 16 bits Output FET: SPI: 0 = OUT0 1 = OUT1 2 = IN0 3 = IN1 I2C: The I2C address is set by the upper 5 bits via DIP switch The lower 2 bits of the address are the same as SPI Power supply: +5V (supplied from the bus) Current consumption: 150mA (no-load operation, all outputs ON) Operating temperature range: 0℃ to 60℃ External interface connector (same for input and output): Board side S20B-PADSS-1 (JST) (Cable sold separately)
Price information
¥9,800 - The price is excluding tax.
Price range
P1
Delivery Time
Applications/Examples of results
Raspberry Pi expansion
Company information
At Embedded Technology Co., Ltd., in addition to selling microcontroller boards, we also offer electronic circuit design (both analog and digital), pattern design, as well as FPGA and CPLD software development. Please feel free to contact us. Announcement: We are pleased to announce that we will be exhibiting at the "Sensor/IoT Technology Exhibition 2018" hosted by the Osaka Industrial Creation Center on Wednesday, July 25, 2018. Exhibition Content: Making satellite communication accessible! - Communication technology using the Slayya satellite - Communication technology using the Iridium satellite - Raspberry Pi and BBB expansion boards For more details, please visit: https://www.sansokan.jp/events/eve_detail.san?H_A_NO=25639 We sincerely look forward to your visit.
