(Free) Instron WEB Seminar Series: Fatigue Testing Machine Series: NEW Electric Drive High Capacity Fatigue Testing Machine ElectroPuls E20000

Supports testing using a constant temperature bath! Reduces energy consumption by minimizing test time.

"WaveMatrix" utilizes self-heating control software for test specimens to optimize test frequency, thereby improving the productivity and consistency of tests related to composite materials and polymer materials. It is possible to reduce test time while achieving unprecedented accuracy in test temperature. This patented system achieves and maintains the specified test temperature by changing the test frequency according to the measurement temperature of the test specimen. In structural composite materials, the impact of a 5°C temperature change is greater than a change in frequency by a factor of two, making the benefits of strict test temperature control significantly higher than moderate frequency fluctuations. [Features] - User-defined temperature range (controllable up to ±0.5°C) - User-defined frequency range - Thermocouple data input via USB is possible - Analog input of 0-10V for thermocouple data, including infrared thermometer data, is possible - Thermocouples can be installed according to the shape of the test specimen *For more details, please refer to the PDF document or feel free to contact us.

• Other Software

E20000 has been newly added! Dynamic fatigue testing machine that adopts linear motor technology, eliminating the need for hydraulic oil, energy-saving, and low noise.

"ElectroPuls" is an electric fatigue testing machine that utilizes linear motor technology (patented) based on approximately 13 years of testing experience. It features a wide performance range capable of conducting static, dynamic, and fatigue tests, making it an ideal system for various laboratories and testing facilities. It can also be used for testing biomaterials and medical devices. In addition to a variety of testing accessories, the new "E20000" can perform both dynamic and static tests with a single unit. Depending on the application, we offer a lineup of uniaxial systems up to 10kN and 100Nm, as well as linear/torsion (biaxial) options. There are three sizes available for selection based on your needs. Our product meets your testing requirements in a simpler, smarter, and safer way. 【Features】 ■ No hydraulic oil required ■ Energy-efficient ■ Low noise ■ Space-saving ■ No complex and costly maintenance required 【Software Used】 WaveMatrix2 *For more details, please refer to the PDF materials or feel free to contact us.

• Other measuring instruments

Simultaneous testing of up to 16 specimens is possible! Easy access for specimen insertion, preloading, and adjustments.

The "ElectroPuls 16 Station" is a testing system that significantly reduces testing time and contributes to the rapid market introduction of products. It allows simultaneous testing of tensile, compression, and bending tests with up to 16 specimens. Finished products or individual components, such as NiTi single diamond struts, can be uniformly tested at each station due to easy setup and simple preload adjustments. 【Features】 - The adoption of inline button-type load cells allows for precise adjustment of specimens close to the testing fixture. - There are no alignment errors on the XY axis during adjustments or preload at each station. - Each individual push rod can be adjusted by ±5mm for easy insertion and adjustment of specimens. - Anyone can accurately apply uniform preload across all 16 stations. - No specialized knowledge is required. *For more details, please refer to the PDF materials or feel free to contact us.

• Other measuring instruments

Dynamic linear load capacity ±10kN / dynamic torque capacity ±100Nm! The required floor space for the frame is less than 0.8m².

The E10000 is a state-of-the-art dynamic fatigue testing machine designed for dynamic and static testing of a wide range of materials and components, featuring linear-torsion type technology. It is equipped with advanced digital control electronics from Instron, a Dynacell load cell for biaxial testing, console software, and a new testing technique based on the rigidity of the test specimen for hassle-free tuning, an electric crosshead lift, a T-slot table that can be flexibly configured for testing, and many other user-oriented features. It operates on single-phase power and does not require additional utilities (such as pneumatic, hydraulic, or cooling water supply) for basic testing machine operations. **Features** - Oil-free linear motor technology that maintains a clean state - Separate linear/rotary actuators - Designed for dynamic and static testing of diverse materials and components - High dynamic performance, capable of operating at up to 100Hz - Operable on single-phase main power, no hydraulic or pneumatic sources required *For more details, please refer to the PDF document or feel free to contact us.*

• Other measuring instruments

Dynamic linear load capacity ±3000N / static load capacity ±2100N! The required desk space for the frame is less than 0.3, making it compact.

The "ElectroPuls E3000" is a state-of-the-art dynamic fatigue testing machine designed for dynamic and static testing of a wide range of materials and components. It operates on a single-phase power supply and does not require additional utilities (such as compressed air, hydraulic pressure, or cooling water supply) for basic machine operation. Equipped with advanced digital control electronics, DynacellT load cells, console software, and a new testing technique based on the rigidity of the test specimen for hassle-free tuning, electric crosshead lift, a T-slot table that can be flexibly configured for testing, and many other user-oriented features. 【Features】 ■ Oil-free linear motor technology that maintains a clean state ■ Unlockable to allow for rotational freedom of the actuator, providing flexibility in testing ■ Designed for dynamic and static testing of diverse materials and components ■ High dynamic performance, capable of operating at over 100Hz ■ Temperature-controlled air cooling mechanism *For more details, please refer to the PDF materials or feel free to contact us.

• Other measuring instruments

Dynamic linear load capacity ±3000N / dynamic torque capacity ±25Nm! The required desk space for the frame is less than 0.3m².

The "E3000" is a state-of-the-art dynamic fatigue testing machine designed for dynamic and static testing of a wide range of materials and components, featuring a linear-torsion type design. Equipped with advanced digital control electronics, dual-axis Dynacell load cells, console software, and a new testing technique based on the rigidity of the test specimen for hassle-free tuning, electric crosshead lift, a T-slot table that can be flexibly configured for testing, and many other user-oriented features. It operates on a single-phase power supply and does not require additional utilities (such as pneumatic, hydraulic, or cooling water supply) for basic testing machine operations. 【Features】 ■ Oil-free linear motor technology that maintains a clean state ■ Separate linear/rotary actuators ■ Designed for dynamic and static testing of diverse materials and components ■ High dynamic performance, capable of operating above 100Hz ■ Dynamic linear load capacity: ±3000 N / Dynamic torque capacity: ±25 Nm *For more details, please refer to the PDF document or feel free to contact us.

• Other measuring instruments

A variety of hydraulic servo test systems with different capacities and applications, along with a wealth of applications and fixtures!

This catalog introduces the hydraulic servo fatigue testing systems handled by our company. It features a compact tabletop model "8872 (25 kN)" that meets the high demands of various static and dynamic testing requirements, as well as "8803 (500 kN)" and the controller electronics "8800MT." We also showcase a wealth of applications, so please take a look. 【Featured Products (Excerpt)】 ■ 8872 (25 kN) Fatigue Testing System ■ 8874 (25 kN/100 Nm) Fatigue Testing System ■ 8801 (100 kN) Fatigue Testing System ■ 8862 (100 kN) Low Cycle Fatigue Testing System ■ 8802 (250 kN) Fatigue Testing System *For more details, please refer to the PDF document or feel free to contact us.

• Prime movers, torque converters, hydraulic equipment, generators
• Other measuring instruments

Dynamic load capacity maximum ±10kN / Static load capacity ±7kN! The required floor space for the frame is less than 0.8m², making it compact.

The "ElectroPuls E10000" is a state-of-the-art dynamic fatigue testing machine designed for dynamic and static testing of a wide range of materials and components. Equipped with Instron's advanced digital control electronics, Dynacell load cells, console software, and a new testing technique based on the rigidity of the test specimen for hassle-free tuning, electric crosshead lift, a T-slot table that can be flexibly configured for testing, and many other user-oriented features. It operates on a single-phase power supply and does not require additional utilities (such as pneumatic, hydraulic, or cooling water supply) for basic testing machine operations. 【Features】 ■ Oil-free linear motor technology that maintains a clean state ■ Designed for dynamic and static testing of diverse materials and components ■ High dynamic performance, capable of operating at up to 100Hz ■ Operates on single-phase main power supply, no hydraulic or pneumatic sources needed ■ Temperature-controlled air cooling mechanism *For more details, please refer to the PDF document or feel free to contact us.

• Other measuring instruments

Dynamic load capacity ±1000N / Static load capacity ±710N! The required desk space for the frame is less than 0.15m².

The "ElectroPuls E1000" is a state-of-the-art dynamic fatigue testing machine designed for dynamic and static testing of a wide range of materials and components. It features advanced digital control electronics from Instron, Dynacell load cells, console software, and a new testing technique based on the stiffness of the specimen for hassle-free tuning, an electric crosshead lift, a T-slot table that can be flexibly configured for testing, and many other user-oriented functions. It operates on a single-phase power supply and does not require additional utilities (such as pneumatic, hydraulic, or cooling water supply) for basic testing machine operations. 【Features】 ■ Oil-free linear motor technology (patented) that maintains a clean state ■ Designed for dynamic and static testing of diverse materials and components ■ High dynamic performance, capable of operating at over 100Hz ■ Dynamic load capacity: ±1000 N / Static load capacity: ±710 N ■ Operates on single-phase main power supply, no hydraulic or pneumatic sources needed *For more details, please refer to the PDF materials or feel free to contact us.

• Other measuring instruments

This is a testing machine with a newly added 20 kN dynamic linear capacity and a torque capacity of 130 Nm in the ElectroPuls series.

The electric-driven testing machine 'E20000 Linear Torsion' has double the linear capacity of the conventional E10000 system, while the overall size of the testing machine remains almost the same. With the latest patented automatic electric crosshead clamp, the adjustment of the test space size can be done quickly and easily. Like existing products, it employs Instron's advanced digital control electronics, dual-axis Dynacell(TM) load cells, and a patented simple tuning technology based on the rigidity of the test specimen. 【Performance】 ■ Linear dynamic load capacity: 20 kN (4,500 lbf) ■ Torsional dynamic load capacity: 130 Nm (1150 in-lb) ■ Stroke: 75 mm (2.95 in) ■ Optical encoder: Accurate digital extension/rotation (5 nm resolution) ■ High dynamic performance: Up to 100 Hz *For more details, please download the PDF or contact us.

• Other measuring instruments

A high-capacity fatigue testing machine has just been launched by Instron! In addition to a variety of testing accessories, it can perform both dynamic and static tests with a single unit.

The "ElectroPuls E20000" is a testing machine with a dynamic linear capacity of 20kN, newly added to the ElectroPuls series. It incorporates Instron's advanced digital control electronics, Dynacell load cells, and a simple tuning technology based on the rigidity of the test specimen. With the automatic electric crosshead clamp, the adjustment of the test space size can be done quickly and easily. 【Features】 ■ Utilizes linear motor technology ■ Supports maximum load capacity of 20kN in the ElectroPuls series ■ Automatic electric crosshead lift and clamp ■ Easy setup with intuitive software (WaveMatrix2) ■ Rigidity-based tuning ■ Quiet operation ■ Oil-free design ■ Compact footprint *For more details, please refer to the PDF document or feel free to contact us.

• Other measuring instruments

Fujikou Shuhou Industry Co., Ltd. will hold a free online seminar titled "Introduction to Multi-Laser Wire DED Meltio" on November 26, 2025 (Wednesday). Our company has specialized in laser cladding using powder until 2023. The Meltio, introduced in April 2023, utilizes wire for laser cladding. We will explain the advantages and disadvantages of using wire and powder as supply materials. 【Recommended for】 ■ Those who want to learn about the latest laser cladding technology ■ Those who want to learn about metal 3D printing technology using wire

Are you struggling with the time and effort required to process FAX order forms? In this webinar, we will introduce the latest solution that combines the cloud FAX service 'Maito-k Cloud' with AI-OCR 'WisOCR for Order Forms' to streamline order processing. We will digitize FAX order forms received on paper, and AI-OCR will automatically convert them into data. It accommodates different formats for each client and handles issues specific to FAX, such as dirt and tilt, ensuring smooth integration with core systems. <Recommended for those who:> - Are spending too much time processing FAX order forms - Want to promote paperless operations but find FAX processes to be a bottleneck - Are interested in utilizing AI-OCR but lack a clear image of implementation - Are responsible for improving operational efficiency and promoting DX 【Presentation Content】 ■ Session 1 ┃ Intercom Inc. Reduce the burden of FAX operations! Streamline order processing with cloud FAX ■ Session 2 ┃ Panasonic Solution Technology Co., Ltd. Transforming order processing with AI! Data conversion of FAX order forms made easy with AI-OCR

We are pleased to announce a web seminar hosted by our company. 【Generative AI Utilization Seminar: The First Step to Starting with Generative AI Together】 The currently popular generative AI (such as Copilot and ChatGPT) is a new technology that is useful in various everyday and work situations, including writing, information search, and translation. Unlike previous AI, it has evolved to suggest ideas that humans may not think of and to offer greater flexibility in operation. However, many people may feel that it seems "difficult" or "I don't know where to start." In this seminar, we will start with the basics of generative AI and clearly explain practical utilization methods through examples and demonstrations. We will also carefully introduce points to be aware of when using it. After participating, you should be able to take the first step in mastering generative AI as your "partner." Would you like to experience the future of work with your own hands? We look forward to your registration. 【Timetable】 - Basics of Generative AI Utilization - Introduction of FCS Utilization Examples - Demonstration of Office Product Integration Using Copilot - Q&A Session

On November 20, 2025 (Thursday) and December 2, 2025 (Tuesday) from 11:00 to 14:00, our representative, certified public accountant and tax accountant Koichi Yokoyama, will be speaking at a free webinar hosted by Otsuka Shokai. He will explain important points to note regarding the revised Construction Business Act. [Construction Business Act / Public Works Optimization Promotion Act] - Prevention of omissions in the description of construction contracts - Obligation to notify "risk" information before contract signing by the contractor - Mutual exchange of original copies of construction contracts - Digitization of estimates, contracts, and order forms/acceptance letters We are entering an era where contracts must be documented in writing and stored electronically. Paperlogic is fully committed to supporting companies that have begun the transition from paper to digital.

Are people becoming exhausted in a job where mistakes are not tolerated? [For details and viewing, click here] https://www.lacras.co.jp/news/seminar_in-house-operations_1/ In this seminar, we will explain the challenges and risks of payroll operations faced by large companies from the unique perspective of Lacras' implementation consultants. It is a 15-minute seminar to understand the strengths of in-house operations and hidden costs, and to consider the next steps. <Recommended for> 　✅ Those who are managing payroll in-house but are experiencing increased burdens on the ground 　✅ Those who are overwhelmed by system modifications and legal compliance 　✅ Those who feel the risk of dependency on specific individuals but have not been able to make fundamental revisions [For details and viewing, click here] https://www.lacras.co.jp/news/seminar_in-house-operations_1/ <Seminar Overview> 　◆ Target: Personnel and labor department staff 　◆ Speaker: Jo Matsuda (Director of Business Process Design at Lacras Inc.) 　◆ Organized by: Lacras Inc. (Persol Group)