High-frequency power supply board that can confirm the operation of wireless power transmission.

Up to 50W output is possible! It can be used for practical evaluations incorporated into your company's products.

We would like to introduce our "High-Frequency Power Board." Using our wireless power evaluation high-frequency power board and reference antenna, you can confirm the operation of wireless power transmission. The high-frequency power board can output up to 50W, and with the reference antenna, it can operate with a load of up to 35W at a power transmission distance of 40mm. We can accommodate custom antenna designs according to your needs, so please feel free to contact us when you require assistance. 【Features】 ■ Uses our wireless power evaluation high-frequency power board and reference antenna ■ High-frequency power board can output up to 50W ■ Reference antenna can operate with a load of up to 35W at a power transmission distance of 40mm ■ Operates LED tape (12V) and fan (5V) as loads ■ The output start switch allows you to toggle the LED and fan On/Off by waving your hand *For more details, please refer to the PDF document or feel free to contact us.

• Other Software

Wireless power transmission is possible in enclosed spaces! The receiving circuit can be individually recognized by ID.

We would like to introduce our "Wireless Power Transfer Demo Unit." The receiving circuit is installed underwater, and wireless power is transmitted through glass from the power transmission circuit to the receiving circuit. The power transmission circuit collects sensor information simultaneously with wireless power transfer. This can be applied to monitor the vacuum level in a vacuum chamber, as well as the temperature inside a constant temperature bath. 【Features】 ■ Receiving circuit installed underwater ■ Wireless power transfer through glass from the power transmission circuit to the receiving circuit ■ Water temperature measured with a temperature sensor mounted on the receiving circuit ■ Power transmission circuit collects sensor information simultaneously with wireless power transfer ■ Monitored temperature displayed on a PC ■ Receiving circuit can be individually recognized by ID *For more details, please refer to the PDF document or feel free to contact us.

• others

Sensors can be replaced with various types! They can be applied to equipment condition monitoring devices and more.

We would like to introduce our "Wireless Power Transmission Demo Unit." A brightness sensor, temperature sensor, and receiving circuit are installed on a rotating table, allowing for wireless power transmission from the power transmission circuit to the receiving circuit. The power transmission circuit collects sensor information simultaneously with wireless power transmission. The sensors can be replaced with various types, making it possible to install them in locations where it was previously not feasible. 【Features】 ■ Brightness sensor, temperature sensor, and receiving circuit installed on a rotating table ■ Wireless power transmission from the power transmission circuit to the receiving circuit ■ Activation of each sensor connected to the receiving circuit ■ The power transmission circuit collects sensor information simultaneously with wireless power transmission ■ Monitor sensor information on a PC *For more details, please refer to the PDF document or feel free to contact us.

• others

Wireless power transfer technology selected for the "Kansai Manufacturing Selection 2018" by the Kinki Bureau of Economy, Trade and Industry.

"Wireless power transfer," also known as wireless power transmission, non-contact power transmission, and Wireless Power Transfer (WPT), is a technology that has recently gained attention as a method for supplying power to wireless terminals of IoT devices using advanced technology. Our wireless power transfer utilizes a magnetic resonance method, which features long transmission distances and high efficiency. To actually perform power transmission, it is necessary to combine various technologies in addition to antenna design. Therefore, we will propose solutions tailored to our customers' needs, starting with contract design. [Features] - Design of suitable coils tailored to application devices - Maximization of transmission efficiency at the desired transmission distance - Evaluation of transmission efficiency and output power of the wireless power transfer section - Adjustment of magnetic resonance to enhance transmission efficiency *For more details, please refer to the PDF materials or feel free to contact us.

• Measurement and Inspection
• Power and Energy Equipment

For wireless power transfer design outsourcing, go to WTI!

This technology enables wireless power supply for electronic devices, allowing for high-efficiency power delivery even at a distance. The transmission distance of the electromagnetic induction method, commonly used in wireless power transfer, is generally about 1 cm. However, with our magnetic resonance method, power transmission is possible over distances of several tens of centimeters. Additionally, our unique coil design based on our patented technology allows for more efficient power transmission and a wide range of compatibility for highly customizable wireless power devices. 【Service Overview】 ■ Contract design service for wireless power supply coils ■ Contract evaluation service for magnetic resonance wireless power transfer *For more details, please download the PDF or feel free to contact us.

• others

Are you making progress on measures for the "2024 Problem"? The management of drivers' working hours is becoming stricter, and in the logistics field, reducing "waiting time for loading" has become an urgent issue. To address this challenge, our company, Hotron, proposes the "Vehicle Detection Ultrasonic Sensor 'HM-UX2'," which instantly grasps the availability of loading bays. The 'HM-UX2' contributes to the resolution of waiting times by accurately understanding the availability status, reducing unnecessary waiting and queuing, and shortening waiting times, thereby alleviating the burden on drivers! By replacing the "eyes" of your loading bay management with this high-precision sensor, why not start taking measures against the "2024 Problem"? Take a look at the product features: "Can it accurately detect availability?" "Can we really use it in our company?" "I just want to know the cost, even if it's an estimate." If you have any questions or requests, please feel free to consult us first.

We sincerely apologize for the inconvenience, but we will be closed for summer vacation during the following period. Closure period: August 9 (Saturday) to August 17 (Sunday), 2025 Inquiries received during this period will be addressed sequentially starting from August 18 (Monday). We appreciate your understanding and cooperation.

Thank you very much for visiting our booth at the "High-Performance Materials Week [Osaka] 13th High-Performance Plastics Exhibition." Thanks to you, we had many visitors and were able to conclude the event successfully. In addition to the "PPLB-445" displayed on the day, we have a variety of products available. For those who were unable to measure samples at the venue, we offer a trial measurement service. Furthermore, for those who would like to know more about our products and services, we also accept online meetings. We welcome inquiries from those who attended as well as those who could not make it this time due to scheduling conflicts. Please feel free to contact us.

Aioi System is pleased to announce the release of the low-power wireless display "NW2991-JP," which achieves long battery life. This product supports 920MHz band wireless communication and can be operated in conjunction with wired displays. It can be easily integrated into existing systems by simply adding a master unit. With a high-speed response time of under one second and a variety of display functions for text and barcodes, it supports a wide range of applications. ▼ For more details, please see the press release linked below ▼ ■ Main Features - Maintenance-free design with a battery life of one year (low power consumption) - Compatible with mixed operation with wired displays - High-speed response (under one second) and diverse display formats - Stable communication in the 920MHz band ■ You can see the actual product at the exhibition This product will be displayed at the TOPPAN booth during the International Logistics Comprehensive Exhibition 2025, 4th INNOVATION EXPO. We invite you to visit the venue, see the actual product, and experience its performance. Dates: September 10 (Wed) - 12 (Fri), 2025 Venue: Tokyo Big Sight (Halls 4-8) Booth No: 5-907 (TOPPAN booth) Exhibition official website ▶ linked below We sincerely look forward to your visit.

Thank you very much for visiting our booth at the "Monozukuri World (Measurement, Inspection, and Sensor Exhibition) 2025." Thanks to you, we had many visitors, and the event concluded successfully. In addition to the "PPLB-445" showcased on the day, we have a variety of products available. For those who were unable to conduct sample measurements at the venue, we offer a trial measurement service. Furthermore, for those who would like to learn more about our products and services, we also accept online meetings. We welcome inquiries from those who attended, as well as those who were unable to come this time due to scheduling conflicts. Please feel free to reach out to us.