Refinement of the column base reinforcement method "Smart Fit Method"! / Welding-free work is now possible when the existing structure is an H-beam.

The concept is "minimizing the impact on productivity." Through refinement, it has become possible to perform non-welding work on existing structures when they are H-beams.

The "Smart Fit Method" is a construction technique suitable for seismic reinforcement of factories and warehouses built to the old seismic standards. In the previous Smart Fit Method, welding work was required when installing reinforcement columns, but with this refinement, it is now possible to perform work without welding when the existing structure's columns are H-beams. Additionally, we have achieved an improvement in the toughness index (F value) at the column base. 【Features】 ■ No-welding method No welding is achieved only when the existing columns are H-shaped steel. ■ Ensured productivity Construction can be carried out without stopping production (varies depending on construction conditions). ■ Low cost Total cost reduction is possible compared to conventional methods (example). ■ Space-saving The projection of columns is about one-third compared to conventional methods (example). ■ Shortened construction period A reduction of about 40% in the construction period is possible compared to conventional methods (varies depending on construction conditions). ■ Reliable performance Obtained BCJ certification - 283. *For more details, please contact us or download the catalog to view.

• Vibration isolation, vibration control, and earthquake resistance construction

The Smart Attach method is a non-welding, short-term bracing reinforcement method that replaces traditional seismic reinforcement.

★Acquisition of Construction Technology Examination Certification★ On December 2, 2019, we obtained the "Construction Technology Examination Certification (Building Technology)" from the Japan Architecture Center (BCJ - Examination Certification - 259). The Smart Attach Method is a non-welded joint method for brace reinforcement ends in seismic retrofitting of steel structures. It uses uniquely shaped SA hardware, SA plates, and high-strength bolts to connect to existing structures (H-shaped cross-section columns and beams). Feature 1: No on-site welding required Reduces fire risk. Minimizes fire protection measures. Feature 2: Construction can be done while occupied Simplifies construction through bolt connections. Can be installed without the need for large scaffolding, allowing brace reinforcement work to be carried out while the building is in use. Feature 3: No need to drill bolt holes in the flange Since drilling bolt holes in the flange is unnecessary, there is no cross-section loss in the flange, resulting in minimal reduction in the cross-sectional performance of H-shaped materials. Feature 4: Reduction in work hours and shortening of construction period Contributes to reducing work hours and shortening the construction period through reduced fire protection measures due to non-welding, minimized changes in manufacturing lines and equipment, and enabling construction while occupied.

• Vibration isolation, vibration control, and earthquake resistance construction

Hotron's vehicle detection sensors allow you to search for products that meet your needs from three categories: "Purpose of Use," "Location of Use," and "Product List." The sensors detect the passage of vehicles and notify you with a rotating light, or switch the display of parking availability. They manage vehicle presence, full parking, and exit warnings in parking lots, contributing to safe driving and smooth operational management within the parking area. They are used in various settings, from coin-operated parking to large-scale parking lots.

Do you have any concerns or requests regarding wired bed exit sensors? × Tangling or tripping over wired cables × Cable disconnection or damage × Worrying about forgetting to turn the switch back on after temporarily stopping the sensor. × Wanting to be notified of bed exits even from a location far from the nurse call outlet. Such concerns can be resolved simply by connecting our wireless nurse call linked set to the sensor! Our wireless nurse call linked set allows you to connect bed exit sensors like "Ugo-kun," "Foldable Thin Matta-kun," "Ayumi-chan," and "Just Place Pole-kun" to transmitters and receivers, reducing wiring around the bed area, alleviating concerns about tripping or falling due to cables, and contributing to a tidier work environment. Furthermore, it enables the use of bed exit sensors even from locations far from the nurse call outlet, allowing for more flexible equipment placement.

Based on practical experience in support companies and business companies, SBS Marketing Co., Ltd. provides consulting services related to marketing, sales promotion, and customer attraction mainly in the BtoB (business-to-business) sector. On September 4, 2025, they published a page titled "Does 'Surprising Expectations in a Good Way' Increase Purchase Motivation and Decrease Complaints!? The 'Escalator Effect'". The 'Escalator Effect' refers to the sense of 'discomfort' felt when one's 'preconceptions' confront a different reality. The page explains the mechanisms behind its occurrence, examples of its occurrence and utilization, and key points to know when utilizing it. (Page Overview: Excerpts) ■ What is the 'Escalator Effect'? ■ Mechanisms behind the occurrence of the 'Escalator Effect' ■ Examples and utilization cases of the 'Escalator Effect' ■ Key points to know when utilizing the 'Escalator Effect' (DL content only) ▼ For more details, please visit this page. https://sbsmarketing.co.jp/blog/escalator-effect-2025-09/

Starting from September 1, 2025, we will begin offering CheckPoint UTM in addition to WatchGuard UTM through subscription and rental. For the time being, we will only handle annual payments for the 1535 model (with three types of licenses available), but we hope you will consider it.

NSET Corporation will be exhibiting at the 10th CareTEX Osaka '25, which will be held during Osaka Care Week '25 at Intex Osaka. This exhibition is one of the largest in Western Japan, gathering equipment, supplies, and services for nursing facilities all in one place, making it a professional exhibition. You can view products while selecting them and have business discussions with exhibitors. If you are in the area, we invite you to experience it for yourself. All of our staff are looking forward to your visit.