Water supply piping extended for over 40 years by NMR pipe protector Part 1

Effective against concerns such as "decreased air conditioning efficiency," "increased pump load," and "rising electricity costs" due to red rust in the piping... Boost productivity efficiency!

~Do you have any of these concerns?~ ■High electricity bills... ■Ineffective air conditioning... ■Machines are not functioning well... It might be due to red rust in the pipes... Transform your pipes into "rust-free pipes" with the "NMR Pipe Protector" and extend the lifespan of even old pipes! No worries about business interruptions due to water outages or lost opportunities from line stoppages that are essential for pipe replacement! ~Many factory case studies available~ ★Major DPE factory ★Major automobile manufacturer factory ★Food processing factory in Shizuoka Prefecture *You can download the materials for free. *Please feel free to contact us first.

• Water supply facilities

The rust prevention effect of the NMR pipe protector is due to the action of small clusters of water, which has also been proven to promote the growth of tomatoes and strawberries.

The anti-rust device for pipes, "NMR Pipe Protector," was featured on TV Tokyo's economic information program "World Business Satellite (WBS)." The water treated by the NMR Pipe Protector has a smaller cluster size, which promotes the growth of vegetables, leading to verification in the agricultural sector. At "Mitsu Village" in Himeji City, Hyogo Prefecture, NMR Pipe Protectors are installed in the piping that delivers water to greenhouses. In the program, the weight of tomatoes grown with regular water was compared to those grown with water from the supply pipe equipped with the NMR Pipe Protector, and on average, the latter tomatoes were 16 grams heavier. From previous verifications, it has been found that growing tomatoes with water from supply pipes equipped with the NMR Pipe Protector increases the yield by approximately 7 percent. In this way, the NMR Pipe Protector is expected to leverage its ability to change the properties of water and expand into various fields. *You can download the materials for free. *Please feel free to contact us first.

• Renovation and repair methods

We recommend a free inspection for piping that has been in use for 20 years! Based on diagnostic results from images and data, we will propose the best methods for cost reduction and extending the life of your piping.

Do you know of a way to reduce the management costs of piping and extend the lifespan of old pipes? By reconsidering the replacement of old pipes (pipe renewal) and traditional pipe rehabilitation, significant cost reductions can be achieved. Furthermore, the typical lifespan of pipes, which is around 20 years, can be extended to 40 to 50 years, comparable to the lifespan of the building. At Japan System Planning, we offer a free diagnosis of red rust deterioration inside pipes. If the diagnosis indicates that cost reduction is not possible, we will not make any proposals. We will conduct an assessment to help you continue using old pipes for as long as possible and at a low cost. Please feel free to reach out to us! [Recommended for those who:] ■ Want to know the deterioration status of their pipes ■ Are considering pipe renewal but are troubled by high costs ■ Are paying ongoing costs for pipe management, such as internal cleaning *You can download materials for free. *Please feel free to contact us first. *The free diagnosis is applicable to customers considering the introduction of our products only.

• Water Treatment

Replace everything when it gets old? You’ll miss out if you don’t know! Gentle management methods for piping and the reasons behind them. New anti-corrosion technology for piping!

<Aren't you mistakenly recognizing this?> - There won't be any red water, so it's fine, right... - If it's a VLP pipe or anti-corrosion core, it won't rust, so it's okay... - For now, we're cleaning the pipes, so it should be fine... - If it gets old, we have no choice but to replace everything, right... = Knowledge is definitely beneficial = - Examples of red rust troubles seen in images of piping - What is "black rust" that completely solves the red rust problem? - The chemical change "reduction" that transforms red rust into black rust - Pipe-friendly management methods and the reasons behind them *You can download the materials for free. *Please feel free to contact us first.

• Water Treatment

Based on practical experience in support companies and business companies, SBS Marketing Co., Ltd. provides consulting services related to marketing, sales promotion, and customer acquisition mainly in the BtoB (business-to-business) sector. On September 23, 2025 (Tuesday), they published a page titled "Easier to Optimize the Allocation of Management Resources!? 'Product Portfolio Management (PPM)'". 'Product Portfolio Management' allows for the optimal allocation of management resources by evaluating one's business along two axes: "market growth potential" and "market share," and classifying it into four quadrants. The page explains the benefits that can be realized by utilizing it, the two axes and four quadrants that make it up, and the associated risks. (Page Overview: Excerpts) ■ What is 'Product Portfolio Management'? ■ What can be achieved through 'PPM'? ■ Components of 'PPM' (vertical and horizontal axes) ■ Components of 'PPM' (four quadrants) ■ Two risks associated with 'PPM' (DL content only) ▼ For more details, please visit this page. https://sbsmarketing.co.jp/blog/ppm-2025-09/

An article has been published about the case of introducing the expense reimbursement system "Rakuraku Seisan" at TSP Corporation. ~ In the case of TSP ~ Before the introduction, there were challenges such as dealing with the "paper" sent from various locations and the reliance on specific individuals for the tasks. After the introduction, the input and checking of FB data, which used to take 2 to 3 hours, can now be completed in just 5 minutes. Additionally, the mindset of the accounting department, which was previously reliant on manual entry, has changed. [Case Overview] ■ Challenges before introduction - Dealing with "paper" sent from various locations, reliance on specific individuals ■ Key points of introduction - A robust support system for setup and operation - Easy to start from a small scale both financially and functionally *For more details, please refer to the related links or feel free to contact us.

The facility operating the nurse call system has made the bed exit sensor wireless, allowing it to notify in conjunction with the nurse call. By simply connecting the mat sensor "Foldable Thin Matt-kun," the body movement call "Ugo-kun," and the wheelchair body movement call "Ayumi-chan" to the transmitter HB-RS, you can make the bed exit sensor wireless. The infrared sensor "Just Place Pole-kun" has the transmitter HB-RS built-in. 【Features】 ○ Wireless conversion by simply connecting existing sensors to the transmitter HB-WSK. ○ The bed exit sensor notifies wirelessly in conjunction with the nurse call. ○ Up to 5 transmitters can be registered with one receiver. ○ The communication distance between the transmitter and receiver is approximately 10 meters. ◎ For more details, please contact us or download the catalog.

Full and empty management refers to the real-time display of parking availability and the management of efficient use of parking spaces. By utilizing Hotron's sensors, drivers can quickly discover available parking spaces, achieving efficient parking lot operations. ■ For large parking lots, the "floor management method" and "block management method," which focus on cost reduction, are recommended. Sensors are installed at regular intervals to count the number of vehicles passing through. This method offers the advantage of easy installation and low costs. 【Target Products】 - Vehicle Count Sensor CCS2 - Ultrasonic Sensor HM-UX2/UW2 ■ For smaller scale operations, the "space management method," which installs sensors in each parking space to display availability with high accuracy, is recommended. By ensuring accurate full and empty displays, it helps prevent unnecessary entry of new vehicles and enables safe parking lot operations. 【Target Products】 - Occupancy Detection Sensor HM-UX2/UW2 - Occupancy/Pass Detection Sensor HM-LC6 - Occupancy Detection Sensor HM-LC7/LC7-FLS - Occupancy/Pass Detection Sensor HM-S6 - Occupancy Detection Sensor HM-S8

Castem Co., Ltd. will exhibit at the "Monozukuri World Osaka - Mechanical Components Technology Exhibition" held at Intex Osaka from Wednesday, October 1 to Friday, October 3, 2025. We will showcase lost-wax precision casting and MIM (Metal Injection Molding) products, as well as introduce our new technology, mold-less casting "Digital Cast." In addition to our popular casting demonstrations, we will present case studies on solving issues related to metal parts. Please utilize our "Technical Consultation Booth" to learn about optimal manufacturing methods tailored to your needs, from ultra-small lots to mass production. 【Exhibition Overview】 Dates: October 1 (Wed) - October 3 (Fri), 2025, 10:00 AM - 5:00 PM Venue: Intex Osaka (1-5-102 Nanko-Kita, Suminoe-ku, Osaka City, Osaka Prefecture) Exhibition Booth Number: Hall 6, B Hall 51-1 Pre-registration allows for smooth entry. It is convenient to register via the URL below before your visit. We sincerely look forward to your attendance. https://www.manufacturing-world.jp/osaka/ja-jp/register.html?code=1431877272389396-VEK