A customer case study of KYB Corporation has been published! "Fluid Analysis (CFD) of a Vane Pump Using SimericsMP+ (formerly known as Pumplinx)"

Advanced analysis can be easily performed on SOLIDWORKS! For shortening development time and reducing costs.

"Simerics MP for SOLIDWORKS" is a CAD-integrated thermal fluid analysis software that can be operated within SOLIDWORKS. Integrated into the SOLIDWORKS GUI, designers can perform everything from design to analysis themselves. The calculation settings are also simple, allowing for quick mastery of the operation. By enabling designers to conduct various analyses that were traditionally outsourced, such as optimal shape exploration, problem identification, and performance verification, it leads to reduced development time, improved quality, and cost savings. 【Features】 ■ Supports a wide range of simulations including flow, turbulence, heat conduction, and convection ■ Automatically generates calculation meshes directly from CAD surfaces ■ Extremely fast, accurate, and robust solver ■ Stable iterative calculations for very challenging problems such as micro-scale geometries ■ Accurate calculation results that show excellent correlation with physical tests *For more details, please refer to the materials. Feel free to contact us with any inquiries.

• Other CAD
• Scientific Calculation and Simulation Software
• Other Software

Advanced analysis can be easily performed on SOLIDWORKS! For shortening development time and reducing costs!

"Simerics MP for SOLIDWORKS" is a CAD-integrated thermal fluid analysis software that can be operated on SOLIDWORKS. Integrated into the SOLIDWORKS GUI, designers can perform everything from design to analysis themselves. The calculation settings are simple, allowing for quick mastery of the operation. By enabling designers to conduct various analyses that were traditionally outsourced, such as optimal shape evaluation, root cause investigation, and performance verification, it leads to reduced development time, improved quality, and cost savings. 【Features】 ■ Supports a wide range of simulations including flow, turbulence, heat conduction, and convection ■ Automatically generates computational meshes directly from CAD surfaces ■ Extremely fast, accurate, and robust solver ■ Stable iterative calculations for very challenging problems, such as micro-meter scale geometries ■ Accurate calculation results that show excellent correlation with physical tests *For more details, please refer to the materials. Feel free to contact us with any inquiries.

• Other CAD
• Scientific Calculation and Simulation Software
• Other Software

Advanced analysis can be easily performed on SOLIDWORKS! For shortening development time and reducing costs!

"Simerics MP for SOLIDWORKS" is a CAD-integrated thermal fluid analysis software that can be operated within SOLIDWORKS. Integrated into the SOLIDWORKS GUI, designers can perform everything from design to analysis themselves. The calculation settings are also simple, allowing for quick mastery of the operation. By enabling designers to conduct various analyses, such as examining optimal shapes, identifying the causes of problems, and verifying performance—tasks that were traditionally outsourced—this leads to reduced development time, improved quality, and cost savings. 【Features】 ■ Supports a wide range of simulations including flow, turbulence, heat conduction, and convection ■ Automatically generates computational meshes directly from CAD surfaces ■ Extremely fast, accurate, and robust solver ■ Stable iterative calculations for very challenging problems, such as micro-meter scale geometries ■ Accurate calculation results that show excellent correlation with physical tests *For more details, please refer to the materials. Feel free to contact us with any inquiries.

• Other CAD
• Scientific Calculation and Simulation Software
• Other Software

Fluid analysis software for positive displacement pumps such as gear pumps and vane pumps! CFD software specialized for pumps that other CFD software struggles with!

Simerics MP+ is a fluid analysis software designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid analysis software Simerics MP, and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsations and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variations of flow fields (velocity vectors, pressure), flow rate, fluid forces, and torque The biggest strength is the ability to automatically create meshes even for clearances in the µm range, which is difficult with other general-purpose fluid analysis software!! Recently, there has been an increase in achievements for oil pumps used in automobiles and construction machinery, with examples such as vane pumps for power steering and CVTs, and trochoidal pumps for engine lubrication. *There is a lot of information that cannot be posted online. In particular, please see a demo for the actual mesh creation and movement!

• Other Software

Simulate the flow characteristics of volumetric pumps such as vane pumps! A CFD software specialized for pumps that other CFD software struggles with!

Simerics MP+ is a fluid simulation tool designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid simulation tool Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsations and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variation of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque The biggest strength is the ability to automatically create meshes even for clearances on the order of micrometers, which is difficult with other general-purpose fluid analysis software!! Recently, there has been an increase in achievements with oil pumps for automotive and construction machinery, with examples such as vane pumps for power steering and CVTs, and trochoidal pumps for engine lubrication. *There is a lot of information that cannot be posted online. In particular, please see a demonstration for the actual mesh creation and movement!

• Other Software

Simulate the flow characteristics of volumetric pumps such as gear pumps and vane pumps! A CFD software specialized for pumps that other CFD software struggles with!

Simerics MP+ is a fluid simulation tool designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid simulation tool Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsations and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variations of flow fields (velocity vectors, pressure), flow rate, fluid forces, and torque The greatest strength is the ability to automatically create meshes with clearances in the µm range, which is difficult for other general-purpose fluid analysis software!! Recently, there has been an increase in achievements with oil pumps for automotive and construction machinery, such as vane pumps for power steering and CVTs, and trochoidal pumps for engine lubrication. *There is a lot of information that cannot be posted online. In particular, we encourage you to see the actual mesh creation and movement through a demonstration!

• Other Software

Introduction to the simulation of a shell-and-tube heat exchanger, an example of thermal fluid analysis.

CFD provides a way to shorten product development periods, reduce prototyping costs, and obtain detailed data that is difficult to measure through experiments. In this article, we will introduce application examples that can be useful for product development using Simerics' CAE/CFD software. Heat exchangers have various applications, including boilers, steam generators, and commonly in air conditioners, refrigerators, and automobile radiators. While it is essential to enhance heat transfer efficiency, there is also a demand for miniaturization, which requires various trials and errors in design. However, designing often requires significant costs and time spent on prototyping and experiments. In CFD simulations, computation time can become lengthy depending on the shape of the shell and the number of tubes, but with Simerics' CFD, high-performance thermal fluid analysis can be processed quickly through large-scale parallel computing, allowing for easy and rapid results. The interior of the shell is also modeled in detail, replicating conditions close to actual experiments. This can lead to significant reductions in labor and costs! There are still many reasons to use Simerics' CFD software. Please check the link below or feel free to contact us!

• others

By utilizing the PumpLinx simulator for pump transient flow characteristics, flow analysis within the vane pump can be conducted smoothly.

PumpLinx has mesh templates for various types of pumps. By using templates tailored to the specific pump type being analyzed, the time and effort typically spent on mesh generation for fluid analysis of standard pumps can be significantly reduced and streamlined. For example, even for complex mechanisms like vane pumps, optimal meshes for analysis can be quickly and automatically generated by setting parameters such as the number of vanes based on 3D CAD data. Additionally, the integrated GUI allows for smooth handling of operations such as mesh generation, setting analysis conditions, executing calculations, and displaying results all on one screen, making the analysis easier and faster. Furthermore, many positive displacement pumps, including internal gear pumps, may experience cavitation during their operating cycle. PumpLinx supports cavitation analysis through the adoption of high-precision cavitation models and cavitation damage models.

• others

Simulate the flow characteristics of volumetric pumps such as gear pumps and vane pumps! A CAE software specialized for gear pumps, which are challenging for other CAE software!

Simerics MP+ is a fluid simulation tool designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid simulation tool Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsations and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variation of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque The greatest strength is the ability to automatically create meshes even for clearances in the micrometer range, which is difficult with other general-purpose fluid analysis software!! Recently, there has been an increase in achievements for oil pumps used in automobiles and construction machinery, with examples such as vane pumps for power steering and CVTs, and trochoid pumps for engine lubrication. *There is a lot of information that cannot be posted online. In particular, please see a demonstration for the actual mesh creation and movement!

• Other Software

Simulate the flow characteristics of volumetric pumps such as gear pumps and vane pumps! A CAE software specialized for gear pumps, which other CAE software struggles with!

Simerics MP+ is a fluid simulation tool designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid simulation tool Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsations and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variation of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque The greatest strength is the ability to automatically create meshes even for clearances in the µm range, which is difficult with other general-purpose fluid analysis software!! Recently, there has been an increase in achievements with oil pumps for automotive and construction machinery applications, such as vane pumps for power steering and CVTs, as well as trochoidal pumps for engine lubrication. *There is a lot of information that cannot be posted online. Especially, the actual mesh creation and movement should definitely be demonstrated in a demo presentation!!

• Other Software

Fluid analysis software for volumetric pumps such as gear pumps and vane pumps! CAE software specialized for pumps that other CAE software struggles with!

Simerics MP+ is a fluid analysis software designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid analysis software Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsations and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variations of flow fields (velocity vectors, pressure), flow rate, fluid forces, and torque The greatest strength is the ability to automatically create meshes even for clearances in the micrometer range, which is difficult with other general-purpose fluid analysis software!! Recently, there has been an increase in achievements for oil pumps used in automobiles and construction machinery, with examples such as vane pumps for power steering and CVTs, and trochoidal pumps for engine lubrication. *There is a lot of information that cannot be posted online. In particular, we encourage you to see the actual mesh creation and movement through a demo presentation!!

• Other Software

By utilizing the PumpLinx simulator for pump transient flow characteristics, flow analysis within the internal gear pump can be conducted smoothly.

PumpLinx has mesh templates for various types of pumps. By using templates tailored to the specific pump type being analyzed, the time and effort typically spent on mesh generation for fluid analysis of standard pumps can be significantly reduced and streamlined. For example, even for complex mechanisms like internal gear pumps, optimal meshes for analysis can be quickly and automatically generated based on 3D CAD data by setting parameters such as the number of teeth. Additionally, the integrated GUI allows for smooth handling of operations such as mesh generation, setting analysis conditions, executing calculations, and displaying results all on one screen, making the analysis easier and faster. Furthermore, many positive displacement pumps, including internal gear pumps, may experience cavitation during their operating cycle. PumpLinx supports cavitation analysis through the adoption of high-precision cavitation models and cavitation damage models.

• others

Fluid analysis software for gear pumps, vane pumps, and other positive displacement pumps! A CAE software specialized for pumps that other CAE software struggles with!

SimericsMP+ is a fluid analysis software designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid analysis software Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsation and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variation of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque The biggest strength is the ability to automatically create meshes with clearances in the µm range, which is difficult for other general-purpose fluid analysis software!! Recently, there has been an increase in achievements for oil pumps used in automobiles and construction machinery, with examples such as vane pumps for power steering and CVTs, and trochoid pumps for engine lubrication. *There is a lot of information that cannot be posted online. Especially, the actual mesh creation and movement should definitely be demonstrated in a demo!

• Other Software

Simulation of flow characteristics for positive displacement pumps such as gear pumps and vane pumps! A CAE software specialized for pumps that other CAE software struggles with!

SimericsMP+ is a fluid simulation tool designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid simulation tool Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsations and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variation of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque The greatest strength is the ability to automatically create meshes with clearances in the µm range, which is difficult for other general-purpose fluid analysis software!! Recently, there has been an increase in applications for oil pumps used in automobiles and construction machinery, with examples such as vane pumps for power steering and CVTs, and trochoid pumps for engine lubrication becoming more common. *There is a lot of information that cannot be posted online. Especially, we encourage you to see the actual mesh creation and movement through a demonstration!

• Other Software

Simulate the flow characteristics of volumetric pumps such as vane pumps! A CAE software specialized for pumps that other CAE software struggles with!

Simerics MP+ is a fluid simulation tool designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid simulation tool Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsations and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variations of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque The biggest strength is the ability to automatically create meshes even for clearances in the µm range, which is difficult with other general-purpose fluid analysis software!! Recently, there has been an increase in achievements with oil pumps for automotive and construction machinery, such as vane pumps for power steering and CVTs, and trochoidal pumps for engine lubrication. *There is a lot of information that cannot be posted online. In particular, please see a demo presentation for the actual mesh creation and movement!

• Other Software

Simulate the flow characteristics of volumetric pumps such as gear pumps and vane pumps! A CAE software specialized for pumps that other CAE software struggles with!

Simerics MP+ is a fluid simulation tool for calculating the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid simulation tool Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsations and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variations of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque The biggest strength is the ability to automatically create meshes for clearances on the order of micrometers, which is difficult with other general-purpose fluid analysis software!! Recently, there has been an increase in achievements with oil pumps for automotive and construction machinery, such as vane pumps for power steering and CVTs, and trochoidal pumps for engine lubrication. *There is a lot of information that cannot be posted online. Especially, the actual mesh creation and movement should be demonstrated in a demo presentation!!

• Other Software

Simulate the flow characteristics of positive displacement pumps such as gear pumps and vane pumps! A CAE software specialized for pumps that other CAE software struggles with!

Simerics MP+ is a fluid simulation tool designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid simulation tool Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsations and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variation of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque The biggest strength is the ability to automatically create meshes even for clearances in the µm range, which is difficult with other general-purpose fluid analysis software!! Recently, there has been an increase in achievements in oil pumps for automobiles and construction machinery, with examples such as vane pumps for power steering and CVTs, and trochoid pumps for engine lubrication. *There is a lot of information that cannot be posted online. Especially, the actual mesh creation and movement should definitely be demonstrated in a demo!

• Other Software

Introducing a simulation of an internal gear pump, which is an example of fluid analysis.

CFD provides a way to shorten product development periods, reduce prototype costs, and obtain detailed data that is difficult to measure through experiments. In this article, we will introduce application examples that can be useful for product development using Simerics' CAE/CFD software. One common component used in hydraulic machinery, such as automotive oil pumps, is the internal gear. Research and development is ongoing daily to improve the efficiency of transporting hydraulic fluid. However, this requires spending a lot of cost and time on prototyping and testing the oil pump. Additionally, even when performing CFD simulations, generating the computational mesh between the teeth is a labor-intensive task. With Simerics' CFD, high-performance template meshes are provided, and the deformation of the computational mesh that occurs during computation is fully automated, allowing anyone to easily and quickly generate meshes. This is expected to significantly reduce man-hours and costs! There are still many reasons to use Simerics' CFD software. You can find more details through the link below or feel free to contact us anytime!

• others

By utilizing the PumpLinx simulator for pump transient flow characteristics, smooth flow analysis within axial piston pumps can be conducted.

PumpLinx has mesh templates for various types of pumps. By using templates corresponding to the pump type being analyzed, the time and effort spent on mesh generation, which typically takes a lot of resources for fluid analysis of standard pumps, can be significantly reduced and streamlined. For example, even for complex mechanisms like axial piston pumps, optimal meshes for analysis can be automatically and quickly generated based on 3D CAD data by setting parameters such as the number of cylinders. Additionally, the integrated GUI allows for smooth handling of operations such as mesh generation, setting analysis conditions, executing calculations, and displaying results all on one screen, making the analysis easier and faster. Moreover, in many volumetric pumps, including axial piston pumps, there is a possibility of cavitation occurring during the operating cycle. PumpLinx supports cavitation analysis through the adoption of high-precision cavitation models and cavitation damage models.

• others

Introduction to airflow simulation in the engine room as a case study of flow analysis.

CFD allows for the shortening of product development periods, reduction of prototyping costs, and acquisition of detailed data that is difficult to measure through experiments. In this article, we will introduce application examples that can be useful for product development using Simerics' CAE/CFD software. To prevent a car from overheating, it is necessary to intake air into the engine room and cool various components, making the design of the grille shape and ventilation parts crucial. Additionally, the grille is not only important for cooling effectiveness but also serves as the car's "face," affecting its appearance. Despite being such an important aspect, designing it requires significant time and costs for prototyping and experiments. CFD simulations can also become large-scale, often leading to longer computation times. However, with Simerics' CFD, high-performance flow analysis can be processed quickly through large-scale parallel computing, allowing for easy and rapid results. It also models the complex engine room in detail, recreating conditions close to actual experiments. This is expected to significantly reduce man-hours and costs! There are many more reasons to use Simerics' CFD software. Please check the link below or feel free to contact us!

• others

Introducing a simulation of a check valve (non-return valve) as an example of fluid analysis.

CFD, which allows for the shortening of product development periods, reduction of prototyping costs, and acquisition of detailed data that is difficult to measure through experiments. In this article, we will introduce application examples that can be useful for product development using Simerics' CAE/CFD software. Check valves (non-return valves), which play an important role in preventing water hammer and regulating flow direction, are under constant research and development to enhance the durability of piping. However, this requires spending a lot of time and costs on prototyping and testing the valves. Even when performing CFD simulations, setting up the mesh deformation associated with the opening and closing of flow paths can be quite cumbersome. With Simerics' CFD, high-performance template meshes are provided, and the movement and deformation of the computational mesh that occurs during calculations are fully automated, allowing anyone to easily and quickly generate meshes. This is expected to significantly reduce labor and costs! There are still many reasons to use Simerics' CFD software. You can find more information through the link below or feel free to contact us anytime!

• others

Simulating the flow characteristics of volumetric pumps such as gear pumps and vane pumps! A CFD software specialized for pumps that other CFD software struggles with!

Simerics MP+ is a fluid simulation tool designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid simulation tool Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsations and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variations of flow fields (velocity vectors, pressure), flow rate, fluid forces, and torque The greatest strength is the ability to automatically create meshes even for clearances in the µm range, which is difficult with other general-purpose fluid analysis software!! Recently, there has been an increase in achievements with oil pumps for automobiles and construction machinery, with examples including vane pumps for power steering and CVTs, as well as trochoidal pumps for engine lubrication. *There is a lot of information that cannot be posted online. Especially, we encourage you to see the actual mesh creation and movement in a demo presentation!!

• Other Software

Introduction to the simulation of floodway driving as a case study of free surface analysis.

In this article, we will introduce application examples that can be useful for product development using Simerics' CAE/CFD software. In particular, in Japan, there are many instances of flooding, and there are situations where we must drive on submerged roads. Creating vehicles that can withstand driving in flooded conditions has become one of the important challenges in automotive development, but this requires spending a lot of cost and time on prototype production and testing. CFD simulations can also become large-scale, leading to longer computation times, but with Simerics' CFD, high-performance free surface fluid analysis can be processed quickly through large-scale parallel computing, allowing for easy and rapid results. The complex engine compartment is modeled in detail, reproducing conditions close to actual experiments. Of course, changes in water depth and driving speed are also easily possible. From these calculation results, we can understand the pathways and amounts of water intrusion, providing feedback for shape design and preventing damage and electric shock. There are many more reasons to use Simerics' CFD software. You can find more details through the link below or feel free to contact us anytime!

• others

Simulating the flow characteristics of positive displacement pumps such as gear pumps and vane pumps! A CFD software specialized for pumps that other CFD software struggles with!

SimericsMP+ is a fluid simulation tool designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid simulation tool Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsations and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variation of flow fields (velocity vectors, pressure), flow rate, fluid forces, and torque The biggest strength is the ability to automatically create meshes even for clearances in the micrometer range, which is difficult for other general-purpose fluid analysis software!! Recently, there has been an increase in achievements with oil pumps for automobiles and construction machinery, including examples such as vane pumps for power steering and CVTs, and trochoidal pumps for engine lubrication. *There is a lot of information that cannot be posted online. Especially, we encourage you to see the actual mesh creation and movement in a demo presentation!!

• Other Software

Introducing a simulation of the water flow in a flush toilet, which is an example of a free surface.

In this article, we will introduce application examples that can be useful for product development using Simerics' CAE/CFD software. The water-flushing toilet that we commonly use involves various considerations in its design, including not only the cleaning power but also factors such as water splash and water conservation. To achieve this, it requires not only optimal shape ideas but also repeated trial and error regarding where and how much water to flow. However, conducting prototypes and experiments for toilets requires significant costs and time. With Simerics' CFD, high-performance free surface fluid analysis can be processed quickly through large-scale parallel computing, allowing for easy and rapid results. It also enables very detailed modeling, which can replicate conditions close to actual experiments. From these calculation results, we can accurately understand the flow of water, leading to significant reductions in labor and costs! There are many more reasons to use Simerics' CFD software. You can find more details through the link below or feel free to contact us anytime!

• others

Simulate the flow characteristics of positive displacement pumps such as gear pumps and vane pumps! A CAE software specialized for pumps that other CAE software struggles with!

Simerics MP+ is a fluid simulation tool designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid simulation tool Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsation and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variations of flow fields (velocity vectors, pressure), flow rate, fluid forces, and torque Its greatest strength is the ability to automatically create meshes for clearances in the micrometer range, which is difficult for other general-purpose fluid analysis software!! Recently, there has been an increase in applications for automotive and construction machinery oil pumps, with examples such as vane pumps for power steering and CVTs, as well as trochoidal pumps for engine lubrication. *There is a lot of information that cannot be posted online. In particular, please see a demo for the actual mesh creation and movement!

• Other Software

Simulate the flow characteristics of valves and volumetric pumps! A CFD software specialized in valves and pumps, which other CFD software struggles with!

Simerics MP+ is a fluid simulation tool designed to calculate the transient characteristics of various valves, pumps, and compressors. It is developed based on the thermal fluid simulation tool Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsations and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variation of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque The biggest strength is the ability to automatically create meshes even for clearances in the µm range, which is difficult with other general-purpose fluid analysis software!! In addition to valve analysis, there has been an increasing number of achievements in oil pumps for automotive and construction machinery, such as vane pumps for power steering and CVTs, and trochoid pumps for engine lubrication. *There is a lot of information that cannot be posted online. In particular, please see a demo for the actual mesh creation and movement!!

• Other Software

Simulate the flow characteristics of valves and volumetric pumps! A CFD software specialized in valves and pumps, which other CFD software struggles with!

SimericsMP+ is a fluid simulation tool designed to calculate the transient characteristics of various valves, volumetric pumps, and compressors. It is developed based on the thermal fluid simulation tool Simerics MP, utilizing all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsation and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variation of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque The greatest strength is the ability to automatically create meshes even for clearances in the µm range, which is difficult with other general-purpose fluid analysis software!! In addition to valve analysis, there has been an increase in achievements with oil pumps for automotive and construction machinery, such as vane pumps for power steering and CVTs, and trochoidal pumps for engine lubrication. *There is a lot of information that cannot be posted online. Particularly, the actual mesh creation and movement should definitely be demonstrated in a demo!

• Other Software

Simulate the flow characteristics of volumetric pumps such as gear pumps and vane pumps! A CFD software specialized for pumps that other CFD software struggles with!

Simerics MP+ is a fluid simulation tool designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid simulation tool Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsation and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variation of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque Its greatest strength is the ability to automatically create meshes for clearances in the micrometer range, which is challenging for other general-purpose fluid analysis software!! Recently, there has been an increase in applications for oil pumps used in automobiles and construction machinery, with examples including vane pumps for power steering and CVTs, as well as trochoid pumps for engine lubrication. *There is a lot of information that cannot be posted online. Particularly, we encourage you to see the actual mesh creation and movement through a demonstration!

• Other Software

Introducing a simulation of a check valve (non-return valve) as an example of fluid analysis.

CFD, which allows for the shortening of product development periods, reduction of prototype costs, and acquisition of detailed data that is difficult to measure through experiments. In this article, we will introduce application examples that can be useful for product development using Simerics' CAE/CFD software. Check valves (non-return valves) play an important role in preventing water hammer and regulating flow direction. Research and development are being conducted daily to enhance the durability of piping. However, this requires spending a lot of cost and time on prototyping and testing the valves. Even when performing CFD simulations, setting up the mesh deformation associated with the opening and closing of the flow path can be quite cumbersome. With Simerics' CFD, high-performance template meshes are provided, and the movement and deformation of the computational mesh that occurs during calculations are fully automated, allowing anyone to easily and quickly generate meshes. This is expected to significantly reduce man-hours and costs! There are still many reasons why you should use Simerics' CFD software. You can view more details through the link below or feel free to contact us anytime!

• others

Simulate the flow characteristics of volumetric pumps such as gear pumps and vane pumps! A CFD software specialized for pumps that other CFD software struggles with!

Simerics MP+ is a fluid simulation tool designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid simulation tool Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsation and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variations of flow fields (velocity vectors, pressure), flow rate, fluid forces, and torque The biggest strength is the ability to automatically create meshes even for clearances in the µm range, which is difficult for other general-purpose fluid analysis software!! Recently, there has been an increase in achievements with oil pumps for automotive and construction machinery, with examples such as vane pumps for power steering and CVTs, and trochoidal pumps for engine lubrication. *There is a lot of information that cannot be posted online. Particularly, we encourage you to see the actual mesh creation and movement through a demo presentation!!

• Other Software

Introducing a simulation of a vortex pump (centrifugal pump), which is an example of fluid analysis.

CFD allows for the shortening of product development periods, reduction of prototype costs, and acquisition of detailed data that is difficult to measure through experiments. In this article, we will introduce application examples that can be useful for product development using Simerics' CAE/CFD software. Centrifugal pumps, which utilize centrifugal force to draw up liquids, are widely used for water supply and irrigation, as well as for general industrial applications. An important challenge in design is that, due to the principle of pushing liquid with centrifugal force, cavitation tends to occur easily. Research and development are ongoing daily to suppress this and enhance pump efficiency and durability. However, this requires spending a lot of cost and time on prototyping and experimenting with centrifugal pumps. With Simerics' CFD, multiple cavitation models can be used, and erosion prediction is also possible, allowing for accurate and physically meaningful simulations! This is expected to significantly reduce man-hours and costs! There are many more reasons to use Simerics' CFD software. You can find more details through the link below or feel free to contact us anytime!

• others

An interview on fluid analysis of internal gear pumps using Pumplinx at Aisin Seiki Co., Ltd.

We have published an interview on how Aisin Seiki transitioned to PumpLinx and how it is being utilized. Please take a look.

• others

Fluid analysis software for volumetric pumps such as gear pumps and vane pumps! CFD software specialized for pumps that other CFD software struggles with!

PumpLinx is a fluid analysis software designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid analysis software Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsation and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variation of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque The greatest strength is the ability to automatically create meshes with clearances in the µm range, which is difficult for other general-purpose fluid analysis software!! Recently, there has been an increase in achievements with oil pumps for automobiles and construction machinery, such as vane pumps for power steering and CVT, and trochoidal pumps for engine lubrication. *There is a lot of information that cannot be posted online. In particular, we encourage you to see the actual mesh creation and movement through a demonstration!

• Other Software

Simulate the flow characteristics of volumetric pumps such as vane pumps! A CFD software specialized for pumps that other CFD software struggles with!

PumpLinx is a fluid simulation tool designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid simulation tool Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsation and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variation of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque The greatest strength is the ability to automatically create meshes for clearances in the µm range, which is difficult with other general-purpose fluid analysis software!! Recently, there has been an increase in applications for automotive and construction machinery oil pumps, with examples such as vane pumps for power steering and CVTs, and trochoidal pumps for engine lubrication becoming more common. *There is a lot of information that cannot be posted online. In particular, we encourage you to see the actual mesh creation and movement in a demonstration!

• Other Software

Simulate the flow characteristics of volumetric pumps such as gear pumps and vane pumps! A CFD software specialized for pumps that other CFD software struggles with!

PumpLinx is a fluid simulation tool designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid simulation tool Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsation and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variation of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque The greatest strength is the ability to automatically create meshes even for clearances in the micrometer range, which is difficult with other general-purpose fluid analysis software!! Recently, there has been an increase in achievements with oil pumps for automobiles and construction machinery, with examples such as vane pumps for power steering and CVTs, as well as trochoidal pumps for engine lubrication. *There is a lot of information that cannot be posted online. In particular, please see the actual mesh creation and movement in a demo presentation!

• Other Software

Simulate the flow characteristics of volumetric pumps such as gear pumps and vane pumps! A CAE software specialized for gear pumps, which other CAE software struggles with!

PumpLinx is a fluid simulation tool designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid simulation tool Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsation and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variation of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque The biggest strength is the ability to automatically create meshes even for clearances in the µm range, which is difficult with other general-purpose fluid analysis software!! Recently, there has been an increase in achievements for oil pumps used in automobiles and construction machinery, with examples such as vane pumps for power steering and CVTs, and trochoid pumps for engine lubrication. *There is a lot of information that cannot be posted online. Especially, the actual mesh creation and movement should definitely be demonstrated in a live demo!!

• Other Software

Simulate the flow characteristics of volumetric pumps such as gear pumps and vane pumps! A CAE software specialized for gear pumps, which other CAE software struggles with!

PumpLinx is a fluid simulation tool designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid simulation tool Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsation and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variation of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque The greatest strength is the ability to automatically create meshes even for clearances in the µm range, which is difficult with other general-purpose fluid analysis software!! Recently, there has been an increase in achievements with oil pumps for automobiles and construction machinery, such as vane pumps for power steering and CVTs, and trochoidal pumps for engine lubrication. *There is a lot of information that cannot be posted online. Especially, the actual mesh creation and movement should be demonstrated in a live demo!!

• Other Software

Fluid analysis software for positive displacement pumps such as gear pumps and vane pumps! A CAE software specialized for pumps that other CAE software struggles with!

PumpLinx is a fluid analysis software designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid analysis software Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsation and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variation of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque The biggest strength is the ability to automatically create meshes with clearances in the µm range, which is difficult with other general-purpose fluid analysis software!! Recently, there has been an increase in achievements with oil pumps for automobiles and construction machinery, such as vane pumps for power steering and CVTs, and trochoidal pumps for engine lubrication. *There is a lot of information that cannot be posted online. Especially, the actual mesh creation and movement should definitely be demonstrated in a live demo!!

• Other Software

Fluid analysis software for volumetric pumps such as gear pumps and vane pumps! CAE software specialized for pumps that other CAE software struggles with!

Simerics MP+ is a fluid analysis software designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid analysis software Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsations and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variations of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque The biggest strength is the ability to automatically create meshes even for clearances in the µm range, which is difficult with other general-purpose fluid analysis software!! Recently, there has been an increase in achievements with oil pumps for automotive and construction machinery, with examples such as vane pumps for power steering and CVTs, and trochoidal pumps for engine lubrication. *There is a lot of information that cannot be posted online. Especially, the actual mesh creation and movement should definitely be demonstrated in a demo!

• Other Software

Simulate the flow characteristics of volumetric pumps such as gear pumps and vane pumps! A CAE software specialized for pumps that other CAE software struggles with!

PumpLinx is a fluid simulation tool designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid simulation tool Simerics MP, utilizing all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsation and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variations of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque The greatest strength is the ability to automatically create meshes with clearances in the µm range, which is difficult for other general-purpose fluid analysis software!! Recently, there has been an increase in achievements with oil pumps for automobiles and construction machinery, such as vane pumps for power steering and CVTs, and trochoidal pumps for engine lubrication. *There is a lot of information that cannot be posted online. In particular, please see a demo presentation for the actual mesh creation and movement!

• Other Software

Simulate the flow characteristics of volumetric pumps such as vane pumps! A CAE software specialized for pumps that other CAE software struggles with!

PumpLinx is a fluid simulation tool designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid simulation tool Simerics MP, utilizing all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsation and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variation of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque The biggest strength is the ability to automatically create meshes for clearances in the µm range, which is difficult with other general-purpose fluid analysis software!! Recently, there has been an increase in applications for oil pumps used in automobiles and construction machinery, with examples such as vane pumps for power steering and CVTs, and trochoid pumps for engine lubrication. *There is a lot of information that cannot be posted online. In particular, please see a demo presentation for the actual mesh creation and movement!

• Other Software

Simulate the flow characteristics of volumetric pumps such as gear pumps and vane pumps! A CAE software specialized for pumps that other CAE software struggles with!

Simerics MP+ is a fluid simulation tool designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid simulation tool Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsation and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variations of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque The biggest strength is the ability to automatically create meshes even for clearances in the µm range, which is difficult for other general-purpose fluid analysis software!! Recently, there has been an increase in applications for automotive and construction machinery oil pumps, with examples such as vane pumps for power steering and CVTs, and trochoidal pumps for engine lubrication. *There is a lot of information that cannot be posted online. Especially, the actual mesh creation and movement should be demonstrated in a demo presentation!!

• Other Software

Simulate the flow characteristics of volumetric pumps such as gear pumps and vane pumps! A CAE software specialized for pumps that other CAE software struggles with!

Simerics MP+ is a fluid simulation tool designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid simulation tool Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsation and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variation of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque The greatest strength is the ability to automatically create meshes even for clearances in the µm range, which is difficult with other general-purpose fluid analysis software!! Recently, there has been an increase in achievements with oil pumps for automotive and construction machinery, with examples such as vane pumps for power steering and CVTs, and trochoidal pumps for engine lubrication. *There is a lot of information that cannot be posted online. Especially, the actual mesh creation and movement should be demonstrated in a live demo!!

• Other Software

Simulating the flow characteristics of positive displacement pumps such as gear pumps and vane pumps! A CFD software specialized for pumps that other CFD software struggles with!

Simerics MP+ is a fluid simulation tool designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid simulation tool Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsations and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variation of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque The biggest strength is the ability to automatically create meshes for clearances in the µm range, which is difficult with other general-purpose fluid analysis software!! Recently, there has been an increase in achievements with oil pumps for automotive and construction machinery applications, such as vane pumps for power steering and CVTs, and trochoidal pumps for engine lubrication. *There is a lot of information that cannot be posted online. In particular, please see the actual mesh creation and movement in a demo presentation!

• Other Software

Introduction to the simulation of a two-axis screw compressor using SimericsMP+ and SCORG for thermal fluid analysis.

CFD allows for the shortening of product development periods, reduction of prototype costs, and acquisition of detailed data that is difficult to measure through experiments. In this article, we will introduce application examples that can be useful for product development using Simerics' CAE/CFD software. Two-axis screw compressors have applications in refrigeration and air conditioning, including air conditioners and refrigerators. In the design process, a significant amount of cost and time must be spent on prototyping and experimentation. With Simerics' CFD, high-performance thermal fluid analysis can be processed quickly through large-scale parallel computing, allowing for easy and rapid results. Additionally, the cooling lubricants are analyzed using the VOF method, recreating conditions close to actual experiments. This is expected to significantly reduce man-hours and costs! There are still many reasons to use Simerics' CFD software. Please check the link below or feel free to contact us!

• others

Introduction to a fluid analysis simulation of a two-axis screw compressor using SimericsMP+ and SCORG for thermal fluid analysis.

CFD allows for the shortening of product development periods, reduction of prototype costs, and acquisition of detailed data that is difficult to measure through experiments. In this article, we will introduce application examples using Simerics' CAE/CFD software that can be beneficial for product development. Two-axis screw compressors have applications in refrigeration and air conditioning-related fields, such as air conditioners and refrigerators. In the design process, a significant amount of cost and time must be spent on prototyping and experiments. With Simerics' CFD, high-performance thermal fluid analysis can be processed quickly through large-scale parallel computing, allowing for easy and rapid acquisition of results. Additionally, the cooling lubricant is analyzed using the VOF method, recreating conditions close to actual experiments. This is expected to significantly reduce man-hours and costs! There are still many reasons to use Simerics' CFD software. Please check the link below or feel free to contact us!

• others

Introduction to a fluid analysis simulation of a two-axis screw compressor using SimericsMP+ and SCORG, as a case study in thermal fluid analysis.

CFD allows for the reduction of product development time and prototyping costs, as well as obtaining detailed data that is difficult to measure through experiments. In this article, we will introduce application examples that can be useful for product development using Simerics' CAE/CFD software. Two-axis screw compressors have applications in refrigeration and air conditioning, including air conditioners and refrigerators. In the design process, a significant amount of cost and time must be spent on prototyping and experiments. With Simerics' CFD, high-performance thermal fluid analysis can be processed quickly through large-scale parallel computing, providing results easily and rapidly. Additionally, the cooling lubricants are analyzed using the VOF method, reproducing conditions close to actual experiments. This is expected to significantly reduce man-hours and costs! There are many more reasons to use Simerics' CFD software. Please check the link below or feel free to contact us!

• others

Introduction to a fluid flow analysis simulation of a two-axis screw pump using SimericsMP+ and SCORG for thermal fluid analysis.

CFD provides a means to shorten product development periods, reduce prototyping costs, and obtain detailed data that is difficult to measure through experiments. In this article, we will introduce application examples that can assist in product development using Simerics' CAE/CFD software. The two-axis screw pump has applications in refrigeration and air conditioning, including air conditioners and refrigerators. In the design process, significant costs and time must be spent on prototyping and experiments. With Simerics' CFD, high-performance thermal fluid analysis can be processed quickly through large-scale parallel computing, allowing for easy and rapid results. Additionally, the cooling lubricants are analyzed using the VOF method, recreating conditions close to actual experiments. This is expected to significantly reduce man-hours and costs! There are many more reasons to use Simerics' CFD software. Please check the link below or feel free to contact us!

• others

Introduction to the simulation of a two-axis screw pump using SimericsMP+ and SCORG for thermal fluid analysis.

CFD allows for the shortening of product development periods, reduction of prototyping costs, and acquisition of detailed data that is difficult to measure through experiments. In this article, we will introduce application examples that can be useful for product development using Simerics' CAE/CFD software. Two-axis screw pumps have applications in refrigeration and air conditioning, including air conditioners and refrigerators. In the design process, a significant amount of cost and time must be spent on prototyping and experiments. With Simerics' CFD, high-performance thermal fluid analysis can be processed quickly through large-scale parallel computing, allowing for easy and rapid acquisition of results. Additionally, the cooling lubricants are analyzed using the VOF method, recreating conditions close to actual experiments. This is expected to lead to significant reductions in man-hours and costs! There are many more reasons to use Simerics' CFD software. Please check the link below or feel free to contact us!

• others

Introduction to flow simulation of a two-axis screw compressor using SimericsMP+ and SCORG.

CFD provides a means to shorten product development periods, reduce prototype costs, and obtain detailed data that is difficult to measure through experiments. In this article, we will introduce application examples that can be useful for product development using Simerics' CAE/CFD software. Two-axis screw compressors have applications in refrigeration and air conditioning, including air conditioners and refrigerators. In the design process, a significant amount of cost and time must be spent on prototyping and experiments. With Simerics' CFD, high-performance thermal fluid analysis can be processed quickly through large-scale parallel computing, allowing for easy and rapid acquisition of results. Additionally, the cooling lubricants are analyzed using the VOF method, recreating conditions close to actual experiments. This is expected to significantly reduce man-hours and costs! There are still many reasons to use Simerics' CFD software. Please check the link below or feel free to contact us!

• others

Introduction to the simulation of a two-axis screw pump using SimericsMP+ and SCORG for thermal fluid analysis.

CFD allows for the shortening of product development periods, reduction of prototype costs, and acquisition of detailed data that is difficult to measure through experiments. In this article, we will introduce application examples that can be useful for product development using Simerics' CAE/CFD software. The two-axis screw pump has applications in refrigeration and air conditioning, including air conditioners and refrigerators. In the design process, significant costs and time must be spent on prototyping and experimentation. With Simerics' CFD, high-performance thermal fluid analysis can be processed quickly through large-scale parallel computing, allowing for easy and rapid results. Additionally, the cooling lubricants are analyzed using the VOF method, recreating conditions close to actual experiments. This is expected to significantly reduce man-hours and costs! There are many more reasons to use Simerics' CFD software. Please check the link below or feel free to contact us!

• others

Introduction to a flow analysis simulation of a two-axis screw compressor using SimericsMP+ and SCORG for thermal fluid analysis.

CFD allows for the shortening of product development periods, reduction of prototyping costs, and acquisition of detailed data that is difficult to measure through experiments. In this article, we will introduce application examples that can be useful for product development using Simerics' CAE/CFD software. The two-axis screw compressor has applications in refrigeration and air conditioning, including air conditioners and refrigerators. In the design process, significant costs and time must be spent on prototyping and experiments. With Simerics' CFD, high-performance thermal fluid analysis can be processed quickly through large-scale parallel computing, allowing for easy and rapid results. Additionally, the cooling lubricant is analyzed using the VOF method, recreating conditions close to actual experiments. This is expected to significantly reduce man-hours and costs! There are still many reasons to use Simerics' CFD software. Please check the link below or feel free to contact us!

• others

Introduction to the simulation of a two-axis screw compressor using SimericsMP+ and SCORG for thermal fluid analysis.

CFD provides a means to shorten product development periods, reduce prototyping costs, and obtain detailed data that is difficult to measure through experiments. In this article, we will introduce application examples that can be useful for product development using Simerics' CAE/CFD software. The two-axis screw compressor has applications in refrigeration and air conditioning, including air conditioners and refrigerators. In the design process, a significant amount of cost and time must be spent on prototyping and experiments. With Simerics' CFD, high-performance thermal fluid analysis can be processed quickly through large-scale parallel computing, allowing for easy and rapid acquisition of results. Additionally, the cooling lubricating oil is analyzed using the VOF method, recreating conditions close to actual experiments. This is expected to lead to significant reductions in man-hours and costs! There are many more reasons to use Simerics' CFD software. Please check the link below or feel free to contact us!

• others

It offers ease of use and multifunctionality to meet a wide range of needs from beginners to experts in CFD analysis.

Simerics MP+ is a fluid analysis software designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid analysis software Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsations and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variations of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque The greatest strength is the ability to automatically create meshes even for clearances in the µm range, which is difficult for other general-purpose fluid analysis software!! Recently, there has been an increase in achievements with oil pumps for automobiles and construction machinery, such as vane pumps for power steering and CVTs, and trochoidal pumps for engine lubrication. *There is a lot of information that cannot be posted online. In particular, please see a demo for the actual mesh creation and motion!

• Other Software

Instead of software experts, physics experts will handle the initial meeting and provide analysis results tailored to the customer's needs.

Our company offers contract analysis (commissioned analysis) and consulting as one of the pillars of our business. Based on the extensive know-how cultivated through contract analysis in CAE, we provide not just simple analysis proposals using software, but also consultations for contract analysis (commissioned analysis) services by experts in physics.

• Other CAD

It is possible to perform mesh generation, analysis, and post-processing in the same environment!

Simerics MP+ is a fluid analysis software designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid analysis software Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsation and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variation of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque The biggest strength is the ability to automatically create meshes even for clearances in the µm range, which is difficult for other general-purpose fluid analysis software!! Recently, there has been an increase in achievements with oil pumps for automobiles and construction machinery, such as vane pumps for power steering and CVTs, and trochoidal pumps for engine lubrication. *There is a lot of information that cannot be posted online. In particular, please see the actual mesh creation and movement in a demonstration!

• Other Software

Instead of software experts, physics experts will handle the initial meeting and provide analysis results tailored to the customer's needs.

Our company offers contract analysis (commissioned analysis) and consulting as one of the pillars of our business. Based on the extensive know-how cultivated through contract analysis in CAE, we do not simply propose basic analyses using software; instead, we provide consultations for contract analysis (commissioned analysis) services by physics experts.

• Other CAD

Instead of software experts, physics experts will handle the initial meeting and provide analysis results tailored to the customer's needs.

Our company offers contracted analysis (outsourced analysis) and consulting as one of the pillars of our business. Based on the extensive know-how cultivated through contracted analysis in CAE, we do not simply propose basic analyses using software; instead, our team of physics experts is available to consult on contracted analysis (outsourced analysis) services.

• Other CAD

Instead of software experts, physics experts will handle the initial meeting and provide analysis results tailored to the customer's needs.

Our company offers contracted analysis (outsourced analysis) and consulting as one of the pillars of our business. Based on the extensive know-how gained from contracted analysis in CAE, we do not simply propose basic analyses using software; rather, we provide consultations for contracted analysis (outsourced analysis) services by physics experts.

• Other CAD

Instead of software experts, physics experts will handle the initial meeting and provide analysis results tailored to the customer's needs.

Our company offers contract analysis (commissioned analysis) and consulting as one of the pillars of our business. Based on the extensive know-how cultivated through contract analysis in CAE, we do not merely propose simple analyses using software; instead, we provide consultations for contract analysis (commissioned analysis) services by experts in physics.

• Other CAD

Instead of software experts, physics experts will handle the initial meeting and provide analysis results tailored to the customer's needs.

Our company offers contract analysis (commissioned analysis) and consulting as one of the pillars of our business. Based on the extensive know-how cultivated through contract analysis in CAE, we do not simply propose basic analyses using software; instead, our team of physics experts is available to consult on contract analysis (commissioned analysis) services.

• Other CAD

Instead of software experts, physics experts will handle the initial meeting and provide analysis results tailored to the customer's needs.

Our company offers contract analysis (outsourced analysis) and consulting as one of the pillars of our business. Based on our extensive know-how cultivated primarily in thermal fluid analysis of pumps and valves, we provide not just simple analysis proposals using software, but also consultations for contract analysis (outsourced analysis) services by physics experts.

• Other CAD

This time, the ACS-5000 is available as a facial recognition terminal compatible with FaceMe Security's add-on feature "Face Terminal," enabling access control management that combines "advanced anti-spoofing features" with high-speed facial recognition powered by edge AI. ■ Main Features 1. Accelerated Authentication Processing FaceMe Security is optimized for the MediaTek Genio 700's NPU, achieving faster facial recognition processing and reduced CPU load compared to processing with only the CPU. It ensures stable authentication without delays even during peak times, such as clocking in and out, contributing to alleviating congestion. 2. Advanced "Anti-Spoofing" Optimized for the IR + RGB camera mounted on the ACS-5000. It can quickly detect fraudulent authentication using photos, videos, or 3D masks within 0.6 seconds, ensuring reliable identity verification. 3. Door Control Without Additional Equipment FaceMe Security can directly control the digital I/O of the ACS-5000, allowing for the construction of an access control management system without the need for additional equipment. This simplifies system configuration and reduces implementation costs.

Do you have any concerns or requests regarding wired bed exit sensors? × Tangling or tripping over wired cables × Cable disconnection or damage × Worrying about forgetting to turn the switch back on after temporarily stopping the sensor. × Wanting to be notified of bed exits even from a location far from the nurse call outlet. Such concerns can be resolved simply by connecting our wireless nurse call linked set to the sensor! Our wireless nurse call linked set allows you to connect bed exit sensors like "Ugo-kun," "Foldable Thin Matta-kun," "Ayumi-chan," and "Just Place Pole-kun" to transmitters and receivers, reducing wiring around the bed area, alleviating concerns about tripping or falling due to cables, and contributing to a tidier work environment. Furthermore, it enables the use of bed exit sensors even from locations far from the nurse call outlet, allowing for more flexible equipment placement.

The non-contact beam touch sensor "HA-T401/HA-T520" has a compact detection range, making it an ideal automatic door sensor for installation on automatic doors facing narrow corridors or busy streets. Depending on the application and installation location, you can choose between "non-vision mounting type" and "non-vision built-in type." 【Features】 ● With the beam touch sensor, you can open and close the automatic door simply by bringing your hand close without touching it, ensuring hygiene. ● Depending on the installation environment, such as single sliding or bi-parting doors, the detection range can be set in four configurations: left, center, right, and a total of 12 spots. ● Two types of activation row settings are available to reduce unnecessary opening and closing of the automatic door due to cross traffic, contributing to energy-saving effects. ● The touch switch and infrared sensor are integrated, allowing for a switch between beam touch and infrared sensor with a single model. 【Recommended for such locations!】 ☑ Entrance facing a busy corridor ☑ Counter or sign near the door ☑ Buildings facing narrow corridors ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors ◎ For more details, please download the materials or contact us.

On our company's website introducing vehicle detection sensors, you can easily find products that meet your needs from three categories: "Purpose of Use," "Location of Use," and "Product List." [Introduction to Vehicle Detection Sensors] The sensors detect the passage of vehicles and notify you with a rotating light or switch the display of parking availability. They contribute to safe driving within parking lots and smooth operational management. They are used in various areas, from coin-operated parking to large-scale parking lots. We will continue to improve our webpage to provide information about Hotron's "Vehicle Detection Sensors."

The facility operating the nurse call system has made the bed exit sensor wireless, allowing it to notify in conjunction with the nurse call. By simply connecting the mat sensor "Foldable Thin Matt-kun," the body movement call "Ugo-kun," and the wheelchair body movement call "Ayumi-chan" to the transmitter HB-RS, you can make the bed exit sensor wireless. The infrared sensor "Just Place Pole-kun" has the transmitter HB-RS built-in. 【Features】 ○ Wireless conversion by simply connecting existing sensors to the transmitter HB-WSK. ○ The bed exit sensor notifies wirelessly in conjunction with the nurse call. ○ Up to 5 transmitters can be registered with one receiver. ○ The communication distance between the transmitter and receiver is approximately 10 meters. ◎ For more details, please contact us or download the catalog.