New product! A bolt that can be tightened with high torque without damaging resin products! High-torque compatible press-fit insert bolt 'SSOO Bolt'.

A high-torque compatible embedded bolt for resin that is strong against rotation and withdrawal, and does not damage the resin. It allows for nut tightening when embedded in resin parts.

The "SSOO Bolt" is a resin embedded bolt (insert bolt) with a special octagonal head shape, offering excellent torque resistance and pull-out strength. An insert bolt is a bolt that is embedded in resin and fastened with a nut. By tightening with a nut, it allows for the fastening of resin parts to each other or resin parts to metal. It minimizes deformation and cam-out of the resin when fastened with high torque, enabling nut tightening at high torque levels. It can also be used for back embedding (thermal press fitting), making it suitable for shapes that cannot be integrally molded. Since the bolt can be used in an upright position within the resin, it improves the assembly of parts. The product design has been completely revamped, and sizes from M4 to M8 are now available. 【Features】 ● Special shape that minimizes cam-out and slip even when tightened with high torque ● Strong against pull-out, preventing deformation of resin parts ● Usable for both insert (simultaneous molding) and outsert (thermal press fitting) ● Mass production possible due to unique manufacturing methods ● Trusted Octa Lobular series *For more details, please refer to the materials. Feel free to contact us with any inquiries.

• others

Suppresses deformation of resin products. Special shape that is less likely to slip even under high torque. High pull-out strength also reduces the number of screw components and contributes to weight reduction.

The "SSOO Nut" features fine irregularities on the surface of the shaft to enhance torque resistance performance. It is a heat-pressed insert nut that achieves "difficulty in rotation" and "high pull-out strength." Even when tightened with high torque, it does not slip, preventing damage to resin products. Additionally, its excellent pull-out strength contributes to weight reduction by reducing the number of components. Available sizes include M4, M5, M6, and M8. 【Features】 ■ Shape designed to prevent slipping and rotation, protecting resin products from damage ■ Contributes to weight reduction through the reduction of components and downsizing ■ Torque strength and pull-out strength have been verified through testing ■ Proven track record as an automotive component *You can download PDF materials such as verification test data. For more details on specifications and pilot holes, please feel free to contact us.

• others

This is a strong insert nut that prevents slippage (co-rotation and idling) caused by bolt tightening and protects resin products from damage.

Insert nuts for resin (plastic) have traditionally utilized knurled, square, and hexagonal shapes, which have raised concerns about the nuts deforming the resin and spinning freely (slipping or idling) when bolts are tightened with high torque. As a result, we received strong requests from customers to develop insert nuts with shapes that can withstand high torque (high torque strength). We conducted research, development, and prototyping in-house and devised an original shape of insert nut that can handle high torque. It is designed for use during resin molding and also boasts excellent tensile strength (pull-out strength). 【Features】 - Strong nuts that prevent spinning (slipping or idling) and protect resin products from damage. - A unique octagonal shape that enables "high torque tightening," which has not been available before. - We have realized a shape that is difficult to spin, as requested by many customers. For more details, please contact us or download the catalog.

• others

Non-magnetic, high-strength, and highly corrosion-resistant austenitic stainless steel bolts. They are environmentally friendly products that do not require heat treatment.

The "high-strength, high-corrosion-resistant stainless steel bolt" is made from austenitic stainless steel based on SUS304 and exceeds the strength classification A2 standard values of JIS B 1054. Through a proprietary molding process (patent obtained), it has achieved strength without the need for heat treatment. 【Features】 - Uses high-corrosion-resistant austenitic stainless steels SUS304 and SUS316 - Achieves high strength by utilizing material strength and work hardening through forging - The proprietary Bausinger effect suppression processing method eliminates the need for strengthening heat treatment, reducing environmental impact - Maintains high corrosion resistance and shortens lead time due to the absence of heat treatment processes - The screw head shape adopts a hexalobular design that offers high torque transmission - Balances corrosion resistance and strength, with a proven track record for use in automotive components (Note) The Bausinger effect refers to the phenomenon where, after applying plastic deformation in one direction, applying a load in the opposite direction results in plastic deformation occurring at a lower stress than when a load is applied again in the same direction. If you are interested in fastening with stainless steel components, please feel free to contact us.

• others

Special octagonal shape with a skillful design! Contributes to weight reduction. A lineup of various insert nuts and insert bolts with simultaneous molding type, post-filling type, and with caps.

The Octa Lobular series contributes to weight reduction! - It protects resin parts and enables high-torque fastening. - The special octagonal shape improves the pull-out strength from resin parts! It achieves safe fastening that is also resistant to vibrations. - With high torque resistance, it allows for a reduction in the number of parts and downsizing. The Octa Lobular series can contribute to cost reduction! - Made of iron, the material cost is one-fifth that of brass. - It is manufactured through forging, which offers excellent material yield. - The unevenness of the shaft part, which enhances torque resistance, is processed through rolling. Mass production is possible. We present the Octa Lobular series developed by a total fastener manufacturer that produces both nuts and bolts. *You can download PDF materials to view verification test data for each product, such as torque tests and pull-out load tests.

• others

Attention those struggling with spinning or pulling out nuts embedded in resin! Introducing outsert nuts that protect resin components and allow for high torque tightening.

"Do you have any of these concerns?" - When tightening conventional insert nuts, they can spin or come loose... - I am looking for an insert nut that can be embedded after resin molding... - I want to reduce the number of screw parts for weight reduction... - Brass insert nuts are expensive due to material and processing costs... With the 'SSOO Nut', these concerns can be resolved. 【5 Features】 ● A shape that is resistant to spinning, preventing damage to resin products ● Can be heated instantly by high-frequency vibrations, allowing for post-embedding ● Excellent pull-out strength enables reduction in the number of screw parts and weight reduction ● Uses a widely distributed material (SWCH10R), eliminating worries about material cost fluctuations ● High-speed production through forging and rolling. Allows for cost-effective mass production compared to machining *For detailed information about the SSOO Nut that can solve your concerns, please view the catalog available for download or feel free to contact us.

• others

Bolts. They are mainly used in transportation equipment parts and are also engaged in research and development.

Bolts are one of the essential mechanical components for fastening products and are used in various machine structures. Our company, as a total fastener manufacturer supporting Japanese industry, produces and sells a wide variety of bolt products, including high-strength bolts, flange bolts, washer-integrated bolts, welded bolts, riveted bolts, and serration bolts. We also have manufacturing and sales bases overseas, including in China and India, to meet our customers' needs. So far, we have developed and mass-produced stainless bolts made from stainless steel SUS304, achieving high strength and corrosion resistance without heat treatment, as well as aluminum bolts based on aluminum alloy A7050, which achieve high strength through a special strengthening process. If you are interested, please feel free to contact us.

• others

We are pleased to announce the establishment of the "Kyushu Sales Office" aimed at strengthening our business foundation in the Kyushu area. With the opening of the new sales office, we will be able to respond more quickly and flexibly to our customers in the Kyushu region, while enhancing our support system closely tied to the local community. We will also deepen our collaboration with local partner companies, aiming for further growth of our business while strengthening our trust with the community. We kindly ask for your continued support for the Kyushu Sales Office and our company. Thank you very much. 【Overview of Kyushu Sales Office】 Establishment Date: January 1, 2026 Company Name: BM Nagano Co., Ltd. Kyushu Sales Office Location: 1-15-20 Hakataekimae, Hakata Ward, Fukuoka City, Fukuoka Prefecture, 812-0011, NMF Hakataekimae Building 2nd Floor

Kort Valuta Inc. (Head Office: Shibuya, Tokyo; CEO: Hideki Shibata; hereinafter “the Company”) announces that Yashima Taxi Co., Ltd. (Head Office: Koto-ku, Tokyo; CEO: Toyoko Nagamine; hereinafter “Yashima Taxi”) has reported positive results— including improvements in hiring, retention, and revenue—one year after implementing the employee benefit service utilizing the “Custom Point Allocation” feature of the TwooCa app, which incorporates a digital employee ID provided by the Company. Press Release: https://prtimes.jp/main/html/rd/p/000000061.000076589.html (*1) Applicable only to benefits that do not fall under “wages” as defined by the Labor Standards Act. (*2) Based on results reported by Yashima Taxi.

In recent years, extreme weather phenomena such as localized heavy rains caused by linear precipitation zones, unpredictable gusts of wind, and record-breaking heatwaves have been increasing. To ensure safety on-site, there is a demand for more accurate weather forecasts and swift decision-making. There are three main reasons why weather risk management is difficult at construction sites and factories: 1. Information is dispersed. Weather forecasts, wind speeds, heatstroke indices, rainfall... necessary information is spread across multiple systems and apps, making comprehensive decision-making time-consuming. 2. Information sharing is challenging. Only a few people are aware of the weather information, and it does not reach cooperating companies or on-site workers, making it difficult for everyone to have the same understanding in emergencies. 3. Localized forecasting is difficult. General weather forecasts target broad areas, and there are limitations to precise predictions at specific construction sites. This is especially true in mountainous or coastal areas. For future weather measures, "centralized management" and "visualization" will be key. Sysmet Corporation released the comprehensive weather platform ZEROSAI X-AI on February 18, 2026, to address these challenges. For more details, please visit our website or download the PDF.

Do you have any concerns or requests regarding wired bed exit sensors? × Tangling or tripping over wired cables × Cable disconnection or damage × Worrying about forgetting to turn the switch back on after temporarily stopping the sensor. × Wanting to be notified of bed exits even from a location far from the nurse call outlet. Such concerns can be resolved simply by connecting our wireless nurse call linked set to the sensor! Our wireless nurse call linked set allows you to connect bed exit sensors like "Ugo-kun," "Foldable Thin Matta-kun," "Ayumi-chan," and "Just Place Pole-kun" to transmitters and receivers, reducing wiring around the bed area, alleviating concerns about tripping or falling due to cables, and contributing to a tidier work environment. Furthermore, it enables the use of bed exit sensors even from locations far from the nurse call outlet, allowing for more flexible equipment placement.

We will introduce the implementation results of the sensor technology developed by the Hotron Group, which has been cultivated over more than half a century, through customer case studies. In addition to automatic door sensors, we also offer a wide range of vehicle detection sensors and nursing/care sensors. We have many implementation examples available, so please take a look at the case study page.