With this nut, you'll be satisfied! Solve issues of slipping and spinning! The complete version of the 'High Torque Compatible Outsert Nut (SSOO Nut) Booklet' has been released!

Introducing the SSOO nut, which protects resin parts and enables high-torque tightening. We will showcase examples of weight reduction and cost benefits made possible by the SSOO nut!

The SSOO nut is a heat-pressed insert nut (outsert nut) that achieves "difficulty in rotation" and "high pull-out strength." 【High Torque Compatibility】 Due to its special octagonal shape (Octa Lobular), it is resistant to free spinning and co-spinning, protecting resin components and allowing for high torque tightening. 【Difficult to Pull Out】 By providing unevenness on the shaft, pull-out strength is improved. It also has high vibration resistance, enabling a reduction in the number of components and weight savings. 【Cost】 Using a widely available material (SWCH10R), there is no need to worry about fluctuations in material costs. High-speed production through forging and rolling allows for cost-effective mass production. 【Usage Method】 Since it can be back-filled through heat pressing, it is easy to handle. This document provides detailed information about the features, specifications, and examples of the SSOO nut. If you are considering the use of insert nuts for resin, please take a look.

• others

Attention those struggling with spinning or pulling out nuts embedded in resin! Introducing outsert nuts that protect resin components and allow for high torque tightening.

"Do you have any of these concerns?" - When tightening conventional insert nuts, they can spin or come loose... - I am looking for an insert nut that can be embedded after resin molding... - I want to reduce the number of screw parts for weight reduction... - Brass insert nuts are expensive due to material and processing costs... With the 'SSOO Nut', these concerns can be resolved. 【5 Features】 ● A shape that is resistant to spinning, preventing damage to resin products ● Can be heated instantly by high-frequency vibrations, allowing for post-embedding ● Excellent pull-out strength enables reduction in the number of screw parts and weight reduction ● Uses a widely distributed material (SWCH10R), eliminating worries about material cost fluctuations ● High-speed production through forging and rolling. Allows for cost-effective mass production compared to machining *For detailed information about the SSOO Nut that can solve your concerns, please view the catalog available for download or feel free to contact us.

• others

You can understand the strength of SSOO nuts! We are offering a technical document that includes data from tensile tests, torque strength tests, and adoption results for free!

The SSOO nut is a high-spec insert nut that contributes to both "high torque compatibility" and "weight reduction." This document is a technical report that includes abundant test data such as tensile tests and torque strength tests for the SSOO nut, as well as usage records. ● High Torque Compatibility Thanks to its unique octagonal shape and the irregularities on the shaft, both torque strength and pull-out strength have been improved compared to conventional insert nuts. 【Verification Experiments】 Torque Strength Test (Material: PP): 31.0 N·m (80% improvement in turning torque compared to conventional products) Pull-Out Load Test (Material: PP): 2713 N (18% improvement in pull-out load compared to conventional products) ● Weight Reduction In applications for resin parts in transportation equipment such as automobiles, replacing conventional nuts with SSOO nuts has led to a reduction in the number of screw components and weight reduction. 【Adopted Resin Parts】 Hydrogen emission parts and intercooler parts in automobiles For detailed technical information, please refer to the download.

• others

This is a strong insert nut that prevents slippage (co-rotation and idling) caused by bolt tightening and protects resin products from damage.

Insert nuts for resin (plastic) have traditionally utilized knurled, square, and hexagonal shapes, which have raised concerns about the nuts deforming the resin and spinning freely (slipping or idling) when bolts are tightened with high torque. As a result, we received strong requests from customers to develop insert nuts with shapes that can withstand high torque (high torque strength). We conducted research, development, and prototyping in-house and devised an original shape of insert nut that can handle high torque. It is designed for use during resin molding and also boasts excellent tensile strength (pull-out strength). 【Features】 - Strong nuts that prevent spinning (slipping or idling) and protect resin products from damage. - A unique octagonal shape that enables "high torque tightening," which has not been available before. - We have realized a shape that is difficult to spin, as requested by many customers. For more details, please contact us or download the catalog.

• others

We are offering free technical materials that demonstrate the strength of SSOI nuts! The materials include a wealth of test data such as tensile tests, torque strength tests, and tightening tests.

The SSOI nut improves torque resistance performance by being molded into a special octagonal shape. It is an insert nut that achieves "difficulty in rotation" and "difficulty in removal," molded simultaneously during resin molding. This technical report presents abundant test data, including tensile tests and torque strength tests, as well as adoption results, explaining the excellent performance of the SSOI nut. ● "Difficulty in rotation" By molding into a special octagonal shape, the torque resistance performance has been significantly improved compared to conventional insert nuts. It prevents the nut from spinning freely (back spinning) during high-torque tightening. 【Verification Test Results】 Torque strength test results (Material: MC Nylon): 25N·m or more ● "Difficulty in removal" Designed for simultaneous use with resin molding, it has excellent tensile (pull-out) strength. It features high vibration resistance and high rotational torque, making it difficult to loosen. 【Verification Test Results】 Pull-out load test results (Material: MC Nylon): 8250N ● Shape As a non-through type, there is no need to worry about resin flowing into the screw hole. 【Adoption Examples】 Resin parts such as air cleaners and intake manifolds. *For detailed technical information, please refer to the download.

• others

By reducing the number of screw components, we have achieved a weight reduction of approximately 17%! Here are examples of the adoption of SSOO nuts. *SSOO nut technical report available.

Here are some examples of adoption that contributed to weight reduction with the high pull-out strength of SSOO nuts. <Adoption Example 1> Adoption Location: Hydrogen discharge parts used in hydrogen fuel cell vehicles (4 SSOO nuts, M6 size, used per unit) Target Resin: PP-TD30 (Polypropylene Talc 30%) [Challenge] ■ To reduce the number of screw components for weight reduction (previously 6 per unit) [Solution] ■ High pull-out strength enabled the reduction of the number of components used [Effect] ■ Reduced the number of screw components to 4 per unit ■ Achieved a weight reduction of 8g (approximately 17%) for screws <Adoption Example 2> Adoption Location: Automotive filter components (2 SSOO nuts, M6 size, used) Target Resin: New material resin using plant-derived fibers (PP) [Challenge] ■ To reduce the number of screw components for weight reduction (previously 3) ■ Insufficient strength of the new material resin causes it to spin under the specified torque with conventional products [Solution] ■ High pull-out strength enabled the reduction of the number of components used ■ High torque resistance performance meets the specified torque requirements [Effect] ■ Reduced the number of screw components to 2 ■ Achieved a weight reduction of 4g (approximately 17%) for screws

• others

Adopted for automotive intercooler parts and other resin components! Introducing examples of SSOO nut applications. *SSOO nut technical report available.

Here are some examples of cases where SSOO nuts were adopted due to their high torque resistance performance. <Adoption Case 1> Adoption Location: Automotive intercooler parts (3 SSOO nuts, M6 size used) Target Resin: PA66-GF35 (Polyamide 66, 35% glass fiber) [Challenges] ■ Need to tighten resin parts with high torque ■ Knurled type insert nuts slip when tightened too much [Solution] ■ Meets requirements with high torque resistance performance ■ No worries about slipping or coming loose [Effect] ■ Protects resin parts from damage <Adoption Case 2> Adoption Location: Turbo engine vehicle intercooler parts (2 SSOO nuts, M6 size used) Target Resin: PA-GF35 (66 nylon, 35% glass) [Challenges] ■ Requirement for tightening with high torque ■ Knurled type insert nuts experience slipping and coming loose [Solution] ■ Meets requirements with high torque resistance performance ■ No worries about slipping or coming loose [Effect] ■ Protects resin parts from damage *An intercooler is a component used to cool air compressed by a supercharger (such as a turbo or supercharger).

• others

Supports high-level torque tightening! Introducing case studies of SSOO. *Case studies are featured in the SSOO Technical Report available now.

Here is a case study of the adoption of high-torque compatible insert nuts (SSOO nuts). Adoption location: Speaker cover parts of a car door Target resin: PP-TD30 (Polypropylene Talc 30%) [Challenges before introduction] - We were looking for an insert nut that could withstand high torque tightening. [Deciding factors for introduction] - After conducting comparative tests with products from other companies, the SSOO nut was adopted because it demonstrated the highest strength. [Effects after introduction] - Since it can withstand high torque tightening, there is no occurrence of nut spinning or loosening. *For more details, please refer to the technical report digest available for download or contact us directly.

• others

Special octagonal shape with a skillful design! Contributes to weight reduction. A lineup of various insert nuts and insert bolts with simultaneous molding type, post-filling type, and with caps.

The Octa Lobular series contributes to weight reduction! - It protects resin parts and enables high-torque fastening. - The special octagonal shape improves the pull-out strength from resin parts! It achieves safe fastening that is also resistant to vibrations. - With high torque resistance, it allows for a reduction in the number of parts and downsizing. The Octa Lobular series can contribute to cost reduction! - Made of iron, the material cost is one-fifth that of brass. - It is manufactured through forging, which offers excellent material yield. - The unevenness of the shaft part, which enhances torque resistance, is processed through rolling. Mass production is possible. We present the Octa Lobular series developed by a total fastener manufacturer that produces both nuts and bolts. *You can download PDF materials to view verification test data for each product, such as torque tests and pull-out load tests.

• others

[To the owners of parking lots and parking lot construction companies] "I am worried about the possibility of colliding with pedestrians when exiting the parking lot..." Among vehicle entrances to parking lots, stores, residences, and factories, those particularly facing sidewalks or roadways are expected to pose risks of dangerous incidents such as pedestrian collisions and vehicle-to-vehicle accidents. To alleviate such concerns, Hotron proposes a [Vehicle Exit Warning Sensor] that detects vehicle departures at various sites and alerts the surrounding area with LED lights and buzzers. The system consists of a simple configuration of "Sensor" + "Controller" + "Switching Power Supply (24V)" + "LED Rotating Light." *When using the exit warning system, we kindly ask that you arrange for the switching power supply (24V), LED rotating light, control panel, circuit breaker, etc. Since it can be retrofitted, it can also be used for existing parking lot entrances. [Contents Included] ○ Exit Warning System Configuration ○ Comparison Table of Exit Warning Sensors ○ Four Modes ○ Wide Range of Applications ○ Customer Feedback ○ Appearance Diagram / Specifications ◎ For more details, please contact us or download the catalog.

In recent times, there has been a growing interest in infection control measures and facility hygiene management. Our company offers non-contact sensor products that are recommended for commercial facilities, food factories, and nursing and caregiving facilities. 【Sensors for Automatic Doors】 ● Light Touch Sensor HA-T401 … When you wave your hand in front of the automatic door, the sensor detects the movement and opens or closes the door. This is recommended for making doors with touch switches non-contact. ● Hand Wave Sensor PF-R5, PF-U2, DHS-1 … Opens and closes the automatic door by waving your hand in front of the sensor. ● Foot Switch PF-01S/01D/03S/05 … Opens and closes the automatic door by placing your foot in the opening. 【Access Control System】 ● Face Recognition + Unmanned Temperature Measurement DS Series … Allows for face recognition along with mask detection and body temperature measurement simultaneously. ● Automatic Disinfectant Spray Dispenser PHW-03B … Automatically sprays disinfectant when you wave your hand in front of the sensor. 【Nursing and Care Sensors】 ● Infrared Bed Exit Sensor "Just Place It Pole-kun" … This bed exit sensor is installed next to the bed and notifies via nurse call when the subject enters the detection range. ◎ For more details, please download the catalog or contact us.

As the new year begins, I would like to extend my heartfelt congratulations on your continued prosperity. I sincerely appreciate your exceptional support throughout the year. This is the STJ Group (Santec Telecom Japan, STJ Rentec). Now, I am pleased to announce that we will be opening our "Transceiver & Smartphone Rental Shop" simultaneously at three locations nationwide on January 26 (Monday)! ■ List of Services to be Offered - Same-day pickup/return of rental equipment - Usage explanations and demonstrations of rental equipment - Wireless solution consultation desk - Mobile BPO service counter As a special promotion to celebrate the opening of the rental shop, we are currently running a special price campaign for rental equipment pickup at the shop! For more details, please contact us!

This is the Agricultural Division of Sumitomo Forestry Greenery Co., Ltd. In our division, we manufacture and sell potting soil for agricultural, horticultural, and greening purposes. In the future, we would like to regularly introduce our products through the Nōsan Girl Letter.

We would like to inform you about our participation in the IT Trend EXPO 2026 Spring. 《Exhibition Information》 With the concept of "New encounters will change the way we work tomorrow," one of the largest online exhibitions in the industry will be held. NTT TechnoCross will be exhibiting in the Human Resources Comprehensive category. We have prepared numerous discussions and sessions featuring special guests who are active on television, allowing even those who are usually busy to efficiently gather information on products and services related to IT and DX. Additionally, the first 10,000 participants will receive a 500 yen Amazon gift card. Please be sure to register early. 《Exhibition Overview》 March 3 (Tuesday) to March 7 (Saturday), 2026, online (free: pre-registration required) 《Participation Registration》 https://it.expo.it-trend.jp/key/opl7kgdj *Please register (free) by clicking "Receive Ticket / Proceed to Participation Registration" at the above URL.