【Event Period: 2019/3/5-8】Writing Fair 2019

This single unit provides reliable lighting for both normal and emergency situations! It is a waterproof emergency lighting fixture with an IP55 protection rating, suitable for outdoor use.

The moisture-proof and waterproof emergency LED lighting fixtures (VYAA and VYBA series) comply with protection grade IP55 and can be installed in indoor environments where dust is generated or in outdoor environments without a roof. The inherent energy consumption efficiency is 142 lm/W (*1), achieving one of the highest energy efficiencies in the industry for waterproof emergency LED lighting fixtures. Additionally, by offering two types of body materials—stainless steel for the LYAA series and steel plate for the LYBA series—we provide a total of 160 models with a rich variety of products, allowing you to choose the optimal model according to the installation location. Separate from the light source that operates during normal conditions, the emergency light source that lights up during a power outage is consolidated at the end of the fixture, powered by an internal rechargeable battery. When installed in the same area as the moisture-proof and waterproof LED fixtures (LYAA and LYBA series), the design can be unified. Furthermore, the installation spacing during emergency lighting can be wider than that of conventional light sources (fluorescent lamps), allowing for a reduction in the number of installations. This helps to lower initial costs during new installations or upgrades. <Product Variations> Total of 160 models Brightness: 5 types Mounting types: 8 types Body materials: 2 types Light source color (color temperature): 2 types

• Cord Pendant
• Waterproof, moisture-proof, explosion-proof lighting fixtures
• Lighting Planning

The first in the domestic industry: Emergency LED lighting equipment that can be used in explosion-proof areas. Certified by the Industrial Safety and Technology Association, approved by the Minister of Land, Infrastructure, Transport and Tourism, displaying the JIL mark.

The first in the domestic industry: Emergency LED lighting fixtures that can be used in explosion-proof areas Launch of explosion-proof emergency LED lighting fixtures (VZAA series) We have launched the first explosion-proof emergency LED lighting fixtures in the domestic industry that can be installed in explosion-proof areas where there is a risk of explosion or fire due to flammable gases or combustible liquids. Currently, emergency lighting fixtures defined by the Building Standards Act are limited to "incandescent lamps" and "fluorescent lamps," and the use of LEDs as emergency light sources has not been permitted. Therefore, while there have been LED emergency lighting fixtures that received certification based on the Minister of Land, Infrastructure, Transport and Tourism's certification system and passed the self-assessment of emergency lighting fixtures by the Japan Lighting Manufacturers Association, they could not be used in explosion-proof areas where there is a risk of explosion or fire. In response to the many requests for the use of LED as an emergency light source even in explosion-proof areas, we have developed explosion-proof emergency LED lighting fixtures that have passed type testing by the Japan Industrial Safety and Health Association, received certification from the Minister of Land, Infrastructure, Transport and Tourism, and display the JIL mark from the Japan Lighting Manufacturers Association, making us the first in the domestic industry to do so. Orders will begin on September 15, 2016. Since the JIL mark is affixed to the product, building confirmation procedures can continue to be carried out smoothly as before.

• Cord Pendant
• Waterproof, moisture-proof, explosion-proof lighting fixtures
• Lighting Planning

Contributing to the all-LED lighting in industrial areas! Launching a fluorescent lamp alternative that incorporates an LED emergency light unit and a sealed emergency LED lighting fixture.

The sealed emergency LED lighting fixtures (VCMA series) comply with protection grade IP55 and can be installed in indoor environments where dust is generated or in outdoor environments without a roof. Utilizing our unique optical design technology, we ensure efficient brightness both during normal and emergency conditions through light distribution control. Particularly during emergency lighting, the installation spacing can be wider than that of conventional light sources (fluorescent lamps), allowing for a reduction in the number of units installed and lowering initial costs. The straight tube LED lamp, which serves as the light source during normal operation, is housed in a highly sealed lamp protection cover, making it resistant to dirt and corrosion while protecting the lamp from external impacts. Since we use straight tube LED lamps, they can be replaced. During a power outage, the emergency light source is consolidated at the end of the fixture and powered by an internal battery. When installed in the same area as the sealed LED fixtures (LCMA series), the design can be unified. Additionally, a lamp monitor (green) lights up to indicate the charging status of the emergency light at a glance. If the green lamp is lit during normal operation, it is functioning properly; if the lamp monitor is off, it indicates that the rechargeable battery needs to be replaced due to its lifespan. The expected lifespan of the rechargeable battery is 4 to 6 years. Battery replacement can be easily performed in a short time while the fixture is installed.

• Cord Pendant
• Waterproof, moisture-proof, explosion-proof lighting fixtures
• Lighting Planning

Fukushima Computer System (FCS) will exhibit at "Cybozu Days Japan 2026," one of the largest events hosted by Cybozu, to be held at Makuhari Messe on November 12 (Thursday) and 13 (Friday), 2026. At the FCS booth, we will introduce case studies and practical know-how centered around "Mojitori," which streamlines input tasks from paper, PDF, and images, and "StockNaut," which supports the utilization of information accumulated in kintone. For those looking to "make on-site operations more efficient" or "expand the use of kintone," we have prepared content that allows you to see actual use cases and specific operational images. Additionally, we have launched a special page summarizing the exhibition content and highlights. Please take a look in advance, and we hope it will be helpful for your visit to our booth on the day of the event. ▶ Special Page https://marketing.fcs.co.jp/lp/CybozuDays2026?k3ad=ipros

Sanphase Electric Co., Ltd. will be exhibiting at the "14th SMART ENERGY WEEK - Smart Energy WEEK [Kansai]" held at Tokyo Big Sight. This exhibition is established in the industry as one of the largest in western Japan, showcasing various technologies such as solar power generation, secondary batteries, and smart grids, attracting experts from around the world. We will be presenting DC brushless canned pumps that can operate at low temperatures down to -80°C and high temperatures up to 250°C. If you are even slightly interested, please come visit our booth.

Cleo Corporation will be exhibiting at "Leisure & Sports Japan 2026," held at Tokyo Big Sight. "Leisure & Outdoor Japan 2026" is a specialized exhibition that gathers the latest products and services from the leisure and outdoor industry. It will showcase products, technologies, and solutions that contribute to the development of new facilities and improvement of services for businesses involved in the operation and development of parks, leisure facilities, theme parks, and outdoor facilities. At our booth, we will introduce products that create play spaces, focusing on water park attractions. We sincerely look forward to your visit. Please note that prior registration on the web is required for your visit. ▼ Please register in advance from here. https://leisure-japan.jp/visitors/

Are you relying on "human eyes" for counting parts? At Tokyo Pack 2026, you can see four types of counting, measuring, and packaging machines in action. - Two-way mirror spectral image processing vision counter: Resolution of 65.5 microns. Can identify overlapping tiny parts. - CCD image processing parts counter VC-200: Compatible with a variety of items such as connectors, electronic parts, rubber, and plastic products. - Mini feeder-type weighing machine: Weighs tea, coffee beans, rice, and powders. - Ultra-compact gas filling automatic packaging machine GX-402: Suitable for flat bags of 10-500g and gusset bags of 100-500g. *The exhibited machines are representative examples of standard specifications. Actual specifications will be customized individually.

Counting errors and the effort to confirm quantities of parts are hidden costs in the manufacturing process. At JIMTOF 2026, we will showcase two models of Shoraku Industry's vision counters that count parts using camera image processing and AI. The two-direction mirror spectral image processing vision counter has a resolution of 65.5 microns. By capturing images from two directions, it accurately identifies overlapping small parts such as screws, bolts, and metal components. The CCD-type image processing parts counter VC-200 model, equipped with four feeders and AI self-learning, accommodates a variety of items including connectors, electronic parts, rubber, and plastic products. *The exhibited machines are representative examples of standard specifications. Actual specifications will be customized individually.