The insert nuts for resin from Daiichi Kogyo were featured in the Sankei Shimbun!!

Suppresses deformation of resin products. Special shape that is less likely to slip even under high torque. High pull-out strength also reduces the number of screw components and contributes to weight reduction.

The "SSOO Nut" features fine irregularities on the surface of the shaft to enhance torque resistance performance. It is a heat-pressed insert nut that achieves "difficulty in rotation" and "high pull-out strength." Even when tightened with high torque, it does not slip, preventing damage to resin products. Additionally, its excellent pull-out strength contributes to weight reduction by reducing the number of components. Available sizes include M4, M5, M6, and M8. 【Features】 ■ Shape designed to prevent slipping and rotation, protecting resin products from damage ■ Contributes to weight reduction through the reduction of components and downsizing ■ Torque strength and pull-out strength have been verified through testing ■ Proven track record as an automotive component *You can download PDF materials such as verification test data. For more details on specifications and pilot holes, please feel free to contact us.

• others

By using SSOO nuts, the cost of bolts and nuts is reduced to 2/3! We are offering a free case study that demonstrates achieving a 2/3 cost reduction and a 17% decrease in threaded parts!

This is an introduction to a case where the automotive parts that typically used six insert nuts were replaced with the "high-strength" SSOO nuts from Daiichi Kogyo (high torque compatible insert nuts), resulting in a reduction of the number of components to four. By reducing the number of insert nuts by "two," the number of bolts was also decreased, leading to a cost reduction of about two-thirds and a weight reduction of 17% for the threaded components. ■ We are currently offering free case study materials that demonstrate the effects of cost reduction and weight reduction! ■ *For more details, please view the PDF available for download.

• others

This is a strong insert nut that prevents slippage (co-rotation and idling) caused by bolt tightening and protects resin products from damage.

Insert nuts for resin (plastic) have traditionally utilized knurled, square, and hexagonal shapes, which have raised concerns about the nuts deforming the resin and spinning freely (slipping or idling) when bolts are tightened with high torque. As a result, we received strong requests from customers to develop insert nuts with shapes that can withstand high torque (high torque strength). We conducted research, development, and prototyping in-house and devised an original shape of insert nut that can handle high torque. It is designed for use during resin molding and also boasts excellent tensile strength (pull-out strength). 【Features】 - Strong nuts that prevent spinning (slipping or idling) and protect resin products from damage. - A unique octagonal shape that enables "high torque tightening," which has not been available before. - We have realized a shape that is difficult to spin, as requested by many customers. For more details, please contact us or download the catalog.

• others

We are offering free technical materials that demonstrate the strength of SSOI nuts! The materials include a wealth of test data such as tensile tests, torque strength tests, and tightening tests.

The SSOI nut improves torque resistance performance by being molded into a special octagonal shape. It is an insert nut that achieves "difficulty in rotation" and "difficulty in removal," molded simultaneously during resin molding. This technical report presents abundant test data, including tensile tests and torque strength tests, as well as adoption results, explaining the excellent performance of the SSOI nut. ● "Difficulty in rotation" By molding into a special octagonal shape, the torque resistance performance has been significantly improved compared to conventional insert nuts. It prevents the nut from spinning freely (back spinning) during high-torque tightening. 【Verification Test Results】 Torque strength test results (Material: MC Nylon): 25N·m or more ● "Difficulty in removal" Designed for simultaneous use with resin molding, it has excellent tensile (pull-out) strength. It features high vibration resistance and high rotational torque, making it difficult to loosen. 【Verification Test Results】 Pull-out load test results (Material: MC Nylon): 8250N ● Shape As a non-through type, there is no need to worry about resin flowing into the screw hole. 【Adoption Examples】 Resin parts such as air cleaners and intake manifolds. *For detailed technical information, please refer to the download.

• others

An article has been published about the case of introducing the expense reimbursement system "Rakuraku Seisan" at TSP Corporation. ~ In the case of TSP ~ Before the introduction, there were challenges such as dealing with the "paper" sent from various locations and the reliance on specific individuals for the tasks. After the introduction, the input and checking of FB data, which used to take 2 to 3 hours, can now be completed in just 5 minutes. Additionally, the mindset of the accounting department, which was previously reliant on manual entry, has changed. [Case Overview] ■ Challenges before introduction - Dealing with "paper" sent from various locations, reliance on specific individuals ■ Key points of introduction - A robust support system for setup and operation - Easy to start from a small scale both financially and functionally *For more details, please refer to the related links or feel free to contact us.

The facility operating the nurse call system has made the bed exit sensor wireless, allowing it to notify in conjunction with the nurse call. By simply connecting the mat sensor "Foldable Thin Matt-kun," the body movement call "Ugo-kun," and the wheelchair body movement call "Ayumi-chan" to the transmitter HB-RS, you can make the bed exit sensor wireless. The infrared sensor "Just Place Pole-kun" has the transmitter HB-RS built-in. 【Features】 ○ Wireless conversion by simply connecting existing sensors to the transmitter HB-WSK. ○ The bed exit sensor notifies wirelessly in conjunction with the nurse call. ○ Up to 5 transmitters can be registered with one receiver. ○ The communication distance between the transmitter and receiver is approximately 10 meters. ◎ For more details, please contact us or download the catalog.

Full and empty management refers to the real-time display of parking availability and the management of efficient use of parking spaces. By utilizing Hotron's sensors, drivers can quickly discover available parking spaces, achieving efficient parking lot operations. ■ For large parking lots, the "floor management method" and "block management method," which focus on cost reduction, are recommended. Sensors are installed at regular intervals to count the number of vehicles passing through. This method offers the advantage of easy installation and low costs. 【Target Products】 - Vehicle Count Sensor CCS2 - Ultrasonic Sensor HM-UX2/UW2 ■ For smaller scale operations, the "space management method," which installs sensors in each parking space to display availability with high accuracy, is recommended. By ensuring accurate full and empty displays, it helps prevent unnecessary entry of new vehicles and enables safe parking lot operations. 【Target Products】 - Occupancy Detection Sensor HM-UX2/UW2 - Occupancy/Pass Detection Sensor HM-LC6 - Occupancy Detection Sensor HM-LC7/LC7-FLS - Occupancy/Pass Detection Sensor HM-S6 - Occupancy Detection Sensor HM-S8

Castem Co., Ltd. will exhibit at the "Monozukuri World Osaka - Mechanical Components Technology Exhibition" held at Intex Osaka from Wednesday, October 1 to Friday, October 3, 2025. We will showcase lost-wax precision casting and MIM (Metal Injection Molding) products, as well as introduce our new technology, mold-less casting "Digital Cast." In addition to our popular casting demonstrations, we will present case studies on solving issues related to metal parts. Please utilize our "Technical Consultation Booth" to learn about optimal manufacturing methods tailored to your needs, from ultra-small lots to mass production. 【Exhibition Overview】 Dates: October 1 (Wed) - October 3 (Fri), 2025, 10:00 AM - 5:00 PM Venue: Intex Osaka (1-5-102 Nanko-Kita, Suminoe-ku, Osaka City, Osaka Prefecture) Exhibition Booth Number: Hall 6, B Hall 51-1 Pre-registration allows for smooth entry. It is convenient to register via the URL below before your visit. We sincerely look forward to your attendance. https://www.manufacturing-world.jp/osaka/ja-jp/register.html?code=1431877272389396-VEK

From November 11, 2025 (Tuesday), at Pacifico Yokohama, we will be exhibiting at interOpto2025 / Light and Laser Science and Technology Fair (organized by the Optical Industry Technology Promotion Association / Optronics Corporation) with a focus on: - UV-transmitting glass that can be molded - Diffusion glass that can uniformly diffuse incident light - A double-sided lens array that is molded without lamination 【About the Exhibition】 Event Name: interOpto2025 / Light and Laser Science and Technology Fair UV Fair Date: November 11 (Tuesday) to 13 (Thursday), 2025 Opening Hours: 10:00 AM to 5:00 PM Venue: Pacifico Yokohama Exhibition Hall C Booth Number: C-15 Organizer: Optical Industry Technology Promotion Association / Optronics Corporation Official Website: https://www.optronics.co.jp/interopto/ We invite everyone attending this exhibition to visit our booth "Gosuzumi Seiko Glass." We sincerely look forward to meeting you on-site.