Vibration-damping resin pipe clamp series wins the Good Design Award 2026.

For positioning and preventing misalignment of pipes.

■ For positioning and preventing displacement of pipes Various pipes and poles can be clamped and secured. *Displacement may occur depending on the load and the material of the pipe. ■ Excellent holding power The inner side is bonded with vibration-damping rubber, which helps prevent slipping, provides vibration assistance, and protects the pipe from scratches. *This product alone does not have a clear effect on reducing vibration transmission rates. ■ Gap will open When installed on a pipe of the appropriate size, it will open approximately 10mm. ■ Easy installation Due to the material's moderate flexibility and strength, it can be easily removed or attached from the middle section of the pipe. ■ Safe for wet areas and outdoors Uses weather-resistant grade polypropylene resin for the base material. It also excels in corrosion resistance and electrical insulation. ■ Rich color variations (up to 8 colors) - Black, White, Gray, Light Gray - Silver, Milky, Ivory, Chocolate ■ Wide range of sizes (over 60 sizes) Compatible pipe outer diameter: 8φ to 106φ *Approximately in 1mm increments *Please contact us separately if size adjustments are needed.

• Fittings

For supporting camera mounts and ceiling-mounted piping.

■Multi-purpose It serves as a hanging bracket for horizontally running pipes suspended from the ceiling, as well as a pipe mount for cameras and other filming equipment. ■Selectable Bolt Diameter You can choose from W3/8 or M10. ■Excellent Holding Power The inner side is bonded with vibration-damping rubber, which helps prevent slipping, provides vibration assistance, and protects pipes from scratches. *This product alone does not have a clear effect on reducing vibration transmission rates. ■Lightweight Due to its very light material, it reduces the energy of the power source. ■Easy Installation The material has a good balance of flexibility and strength, allowing for easy removal and installation from the middle of the pipe. ■Safe for Wet Areas and Outdoors It uses weather-resistant grade polypropylene resin as the base material, which is excellent in corrosion resistance and electrical insulation. ■Rich Color Variations (up to 4 colors) - Black, White, Gray, Light Gray ■Wide Range of Sizes (over 60 sizes available) In addition to sizes that match various piping standards, it fits various cylindrical objects perfectly. *Size (A): 8φ to 106φ, approximately in 1mm increments.

• Fittings

For supporting and stabilizing vertical pipes.

■ Support and Bracing for Vertical Pipes Ensure height from the wall surface and use as a support bracket (vertical band) for bracing the vertical pipe. ■ Outstanding Holding Power The adhesive vibration-damping rubber on the inside helps prevent slipping, provides vibration assistance, and protects the pipe from scratches. ■ Selectable Bracket Sizes - 16φ×50L/100L/150L → Standard sizes - 20φ×75L/125L → For sturdier installations * For sizes 66.7φ and above, only 20φ×100L/150L is available. * Only in white and light gray, sizes 200–300L are available. ■ Height Adjustable The bracket can be easily cut to adjust to your desired height. ■ Easy Installation The material has a suitable balance of flexibility and strength, allowing for easy removal and attachment from the middle section of the pipe. ■ Wide Range of Color Variations (up to 8 colors) - Black, White, Gray, Light Gray - Silver, Milky, Ivory, Chocolate ■ Extensive Size Range (over 60 sizes) Matches piping standards for gas pipes, PVC pipes, copper pipes, coated steel pipes, and cross-linked polyethylene pipes. * Size (A): 8φ to 106φ * Approximately 1mm increments.

• Fittings

Support and fix the pipe by raising it up.

■Lift and Support/Fix the Pipe Lift the pipe by 35mm from the mounting surface such as walls or floors to support and fix it. Used as vertical piping fittings, support fixing fittings, and anti-tipping fittings. ■Outstanding Holding Power The vibration-damping rubber with grooves on the inside is adhered, which helps prevent slipping, provides vibration assistance, and protects the pipe from scratches. ■Adjustable Range There is a 5mm adjustable range in the vertical direction (upper side), allowing for fine height adjustments. ■2D Screw Holes Can be screwed vertically or diagonally. ■Easy Installation Due to the material having moderate flexibility and strength, it can be easily removed or attached from the middle part of the pipe. ■Safe for Water Areas and Outdoors Uses weather-resistant grade polypropylene resin for the base material. It also excels in corrosion resistance and electrical insulation. ■Rich Color Variations (up to 8 colors) - Black, White, Gray, Light Gray - Silver, Milky, Ivory, Chocolate ■Wide Range of Sizes (up to 50 sizes) Matches piping standards for gas pipes, PVC pipes, copper pipes, coated steel pipes, and cross-linked polyethylene pipes. *Sizes (A): 8φ to 54φ

• Fittings

Fix two pipes in parallel and perpendicular.

■Fixing two pipes in parallel or perpendicular Used for pipe support with glasses bands, connecting brackets, and anti-tipping brackets for sway prevention. ■Compatible with different diameters By rearranging the resin pipe clamps, it can accommodate pipes of different sizes. ■Excellent holding power The vibration-damping rubber with grooves adhered to the inside helps prevent slipping, provides vibration assistance, and protects pipes from scratches. ■Selectable bracket sizes - 16φ×50L/100L/150L → Standard sizes - 20φ×75L/125L → For sturdier installations *For sizes 66.7φ and above, only 20φ×100L/150L is available. *White and light gray are available in sizes 200-300L only. ■Length adjustment available Brackets can be easily cut to adjust to your desired length. ■Angle adjustment available Since the brackets and cap joints do not have threaded grooves, they can be adjusted to any angle for use. ■Rich color variations (up to 7 colors) - Black, White, Gray, Light Gray - Silver, Milky, Chocolate ■Wide range of sizes (over 60 sizes available) *Size (A): 8 to 106φ

• Fittings

Hotron Inc. has launched its new product, the "Vehicle Count Sensor CCS3"! This product is a ceiling-mounted sensor that combines infrared and radar technology. It reliably detects vehicles in both directions with a single unit, accommodating traffic during congestion and vehicle passing, thus achieving efficient occupancy management in large parking lots. Additionally, it can be utilized for exit warning purposes in addition to vehicle counting, contributing to the safe and smooth operation of parking facilities. 'Features' - Improved detection performance against changes in road surface during rainy weather by using both infrared and radar. - Equipped with IP67 waterproof and dustproof performance, making it effective even in salt damage areas. - Various settings can be configured from a dedicated app (for Android devices), with current settings easily visible at a glance. - The base dimensions are the same as the previous model "CCS2," allowing for smooth replacement of existing equipment. *For more details, please refer to the product information, catalog download, or contact us.*

The Ministry of Land, Infrastructure, Transport and Tourism has certified us as an "Outstanding Construction Performance Company" and an "ICT Human Resource Development Promotion Company." This is the ninth consecutive year for the "Outstanding Construction Performance Company" designation. We have been recognized as one of 54 companies in the region (8 companies in Ishikawa Prefecture) as an "ICT Human Resource Development Promotion Company," marking our third consecutive year of receiving this designation.

The catalog currently available has been updated. - Arc Flash Protective Clothing AZ ARC 2026.10 For more details, please feel free to contact us via the related link below: [Protective Clothing Wisdom.com]. [Protective Clothing Wisdom.com] is a comprehensive information site for safe working environments, providing guidance on protective clothing and equipment for different work environments, methods for putting on and taking off, and information on customer usage records.

We are pleased to announce that the "Vibration-Damping Resin Pipe Clamp Series" has won the Good Design Award for the fiscal year 2026. Its wide range of sizes and custom options, along with a consistent service design that includes packaging and delivery, were highly praised. - Comments from the judges: This product can securely fix pipes, accommodate a wide range of sizes, and meet users' customization needs. Additionally, the company's rapid delivery system has brought a new recognition to standardized delivery capabilities in the small lot custom area. Each part delivered is packaged with individual signs, ensuring quality traceability at the part level, and the service design concept is thoroughly implemented across the entire supply chain.

Are the collection of company smartphones and the updating of ledgers left to the person in charge every time there is a resignation or transfer? Simply receiving the devices may leave the confirmation of lines, users, and business accounts pending. It is important to establish the order of procedures and the responsible parties to reduce oversight. 【Items to confirm before handover】 ■ Return date, collection person in charge, and whereabouts of devices and accessories ■ Device numbers and registered users in the ledger ■ Conditions for continuing, suspending, or canceling the line ■ Handover of necessary business data ■ Confirmation of accounts and device settings, and preparation for redistribution Initialization and data deletion should be carried out after confirming the storage of business data and internal procedures. Create a checklist for confirmation until the devices are handed over to the next user, and share it with the general affairs and management personnel. At Peak Up, we offer consultations on the operation and management of corporate mobile phones related to employee onboarding and transfers. Please let us know the number of devices you are managing, such as "I am managing 80 devices and want to reduce oversights in collection and ledger updates during resignations." You can contact us through the related product "Consultation for bulk management of 50-100 company smartphones" below.