All registered products eligible for the insulation renovation subsidy of the Mirai Eco Housing 2026 project have been updated to the highest insulation category F!

It can be installed whether you remove the existing finishing material or not! Available for walls, floors, and ceilings!

"RE+ Board" is a reform insulation material that allows for easy installation and thermal renovation. Thanks to its high insulation performance with a thermal conductivity of 0.019 W/(m·K), it provides excellent insulation effects even in thin layers, and is available in a lineup including "for interior wall," "for interior floor," and "for interior ceiling." The rigid polyurethane foam insulation material is available in two thicknesses: 30mm and 45mm. 【Features】 <For interior "walls"> ■ Installed over existing columns or gypsum boards ■ Rigid polyurethane foam insulation is available in two thicknesses: 30mm and 45mm ■ Options include plywood backing for wallpaper or gypsum board ■ The wooden batten parts of the board are secured to existing columns or studs with nails ■ Board sizes are 910×1,820mm and 2,000mm ■ Registered product for subsidies under the Child-Rearing Green Housing Support Project *For more details, please refer to the PDF document or feel free to contact us.

• Other wall materials
• Hard urethane foam
• Urethane foam

High-performance urethane insulation board born from the "voices" of the field.

"Ractee" is a polyurethane insulation board that excels in workability, water resistance, and thermal insulation performance, developed based on the opinions of those who implement it on-site. It adopts non-woven fabric (moisture-permeable waterproof sheet), which is now used in most residential exterior walls, as a protective material for insulation. This enhances the water resistance of the already water-resistant polyurethane insulation material. 【Features】 ■ Non-fluorinated polyurethane ■ The shape of the board's side makes it easy to push in ■ Equipped with fins (edges) to prevent slippage over the long term ■ Water-resistant insulation material with non-woven fabric and rigid polyurethane independent bubbles ■ Smooth flow from installation to mounting ■ Product lineup that meets higher insulation grades for each region ■ Insulation thickness of 80mm for walls that meet the specifications of the guidance standards for regions 1 and 2 will be released in April 2025 *For more details, please refer to the PDF document or feel free to contact us.

• Hard urethane foam
• Urethane foam
• Heat insulation and heat shielding methods

The "Hotron Non-Contact Switch" allows you to open and close doors without directly touching door knobs or switches, making it hygienic! You can choose from two types: the "Hand Wave Sensor," which only requires you to wave your hand, and the "Foot Switch," which only requires you to place your foot in front of it. It reduces the risk of virus and bacteria transmission in places where hygiene is a concern, such as food factories, restaurants, hospitals, and nursing facilities. 【Features】 ○ Reduces the risk of virus transmission by allowing door operation without contact ○ A wide variety of options to choose from based on application and location ○ Ideal for places where hygiene is a priority, such as food factories and medical facilities ○ Prevents unnecessary detection due to the switch mechanism 【Product Lineup】 ■ Hand Wave Sensor Series ○ Exposed waterproof type, front, down, and side-facing type "PF-R5" ○ Exposed type, front-facing type "PF-R1" ○ Embedded type, front-facing type "PF-U2" ○ Exposed type, downward wide type "PF-R4" ■ Foot Switch Series ○ Slim type with wide opening, vertical beam type "PF-01S" ○ Slim type with wide opening, horizontal beam type "PF-03S" ○ Standard type, horizontal beam type "PF-05" ◎ For more details, please download the catalog or contact us.

In recent years, with the outbreak of infectious diseases, there has been a demand for products that cater to "contactless operation," and this trend has extended to environments where automatic doors were previously operated by touch switches. As the automation of doors and the non-contact operation of automatic doors become more widespread, do you have any of the following concerns? ☑ Although automatic doors have been installed, they remain open due to people crossing frequently in busy areas. ☑ Touch switches have been introduced to reduce unnecessary openings and closings, but hygiene is a concern. ☑ Touch switches require regular battery replacements since they are powered. The light beam touch sensor "HA-T401" opens and closes automatic doors without contact, and its compact detection range makes it suitable for narrow passages and busy areas, contributing to energy savings and infection control. 【Benefits of Implementation】 ○ Adaptable to various door types with four spot settings, ideal for busy roads and narrow passages. ○ Energy-saving effects with two setting modes that reduce unnecessary openings and closings of automatic doors. ○ Equipped with a light beam touch function, allowing doors to open and close simply by waving a hand, ensuring hygiene. ◎ For more details, please download the catalog or contact us.

An article has been published about the case of introducing the expense reimbursement system "Rakuraku Seisan" at TSP Corporation. ~ In the case of TSP ~ Before the introduction, there were challenges such as dealing with the "paper" sent from various locations and the reliance on specific individuals for the tasks. After the introduction, the input and checking of FB data, which used to take 2 to 3 hours, can now be completed in just 5 minutes. Additionally, the mindset of the accounting department, which was previously reliant on manual entry, has changed. [Case Overview] ■ Challenges before introduction - Dealing with "paper" sent from various locations, reliance on specific individuals ■ Key points of introduction - A robust support system for setup and operation - Easy to start from a small scale both financially and functionally *For more details, please refer to the related links or feel free to contact us.

Engineering Meetup Report is Now Available! We have published the event report from the AI Startup Engineering Meetup, held at Google for Startups Campus Tokyo. The event brought together four AI startups, where engineers and engineering leaders with backgrounds at major companies shared insights on: ◆Product development ◆Career journeys ◆AI-related initiatives Kort Valuta was represented by our Chief Operating Officer and a Backend Engineer, who shared perspectives on product development in the fintech industry and the unique development environment of a startup. The networking session that followed sparked meaningful conversations on technology and career development, creating valuable new connections among participants. At Kort Valuta, we will continue to value collaboration with the technology community while striving to build even better products. Read the event report: https://prtimes.jp/main/html/rd/p/000000126.000076589.html We're hiring! If you're interested in building the future of fintech with us, check out our careers page: https://recruit.kortvaluta.com/?utm_source=WEB&utm_medium=sns&utm_campaign=ipros

We have been featured in the July 2026 issue of the monthly product information magazine "Mechatronics" for engineers, published by Gicho Business Communications Co., Ltd. The product highlighted is the ultra-thin linear vibration actuator (LRA) "TapSense" BMD-0412, which has a thickness of 1.4mm. This LRA is ideal for providing mechanical switch-like haptic feedback effects in thin tablet PCs and laptops. With excellent responsiveness and vibration levels, it can not only reproduce a crisp click sensation but also deliver a variety of haptic feedback experiences, such as dial operation feel. Additionally, its high responsiveness makes it easier to control compared to conventional LRAs. (Rare-earth-free compatible product) - Size: 25mm × 26mm × 1.4mm - Resonant frequency: 200 Hz - OD Voltage: 10.0 Vp / Waveform: 3-pulse sine wave / Vibration level @ 40g fixture: 7.50 Gpp - Rise time 0-90%: ≦30ms / Fall time 100-10%: ≦30ms - Rated voltage: 3.0Vrms - Rated current: 360mA - Resistance value: 8Ω