Notice of Summer Vacation

Walls taller than 2,200mm can be constructed without a retaining wall! You can build a wall (fence) at the same height as the shutter gate.

"FIT HIGH-WALL" is a tall original seismic wall constructed by combining steel and wooden structures. Even walls exceeding 2,200mm in height can be built without the need for supporting walls, allowing for efficient use of site space without obstructing pathways. It is possible to achieve designs such as curves, slits, and cutouts that are difficult to construct with blocks, and walls (fences) can be built at the same height as the shutter gate. By delivering the completed form, including waterproofing, directly to the site, significant reductions in construction time and relief for on-site workers are achieved. *For more details, please refer to the catalog and PDF.*

• Fences, screens, and partitions

A seismic-resistant roof gate created with a gabled and hipped roof of a sukiya-style gate and a FIT structure. Depending on the finishing method, it can create both a Japanese and a Western atmosphere.

"FIT Gateway" is a modern original roof gate that combines the authentic Japanese-style gate "Sukiya Gate" with the original seismic-resistant gate "FIT GATE." It can be used in various situations such as personal residence access gates, Japanese-style shutter gates, and entrance gates for apartments and commercial facilities. We apply waterproofing to the base within the factory and ship the completed form directly to the site, allowing for installation to be completed on the same day. For large structures, the roof and columns are manufactured in separate parts and connected on-site. After installation, the finishing work is done by the construction company, ensuring high quality while reducing the workload and shortening the construction period. 【Features of FIT Gateway】 ■ A Japanese-style gate that fits modern architecture ■ Image changes depending on the finishing work ■ Combines wooden structures with steel frames to achieve high seismic performance ■ Consistent manufacturing for stable high quality ■ Completed form with waterproofing shipped directly to the site ■ Allows for preferred finishes such as painting or tiling ■ A one-of-a-kind original gate in the world *For more details, please refer to the PDF materials or feel free to contact us.

• Gates, walls and fences

High seismic resistance and free design! Achieving complete waterproofing and a non-rotting wooden structure!

"FIT GATE" is an original gate that enables high seismic performance and flexible design. It can be used in various situations, such as personal residence access gates, shutter gates, and entrance gates for apartments and commercial facilities. The gates are shipped directly to the site with waterproofing applied in the factory, allowing for installation to be completed on the same day. After installation, finishing work is done by the contractor, ensuring high quality while reducing the workload and shortening the construction period. 【Features of FIT GATE】 ■ Combines wooden structures with steel frames to achieve high seismic performance ■ Consistent manufacturing for stable high quality ■ Ships the completed form with waterproofing directly to the site ■ Allows for preferred finishes such as painting or tiling ■ A unique original gate, one of a kind in the world *For more details, please refer to the PDF document or feel free to contact us.

• Car and bicycle parking facilities

By performing cleaning, it can be used longer as a gate to welcome your family and customers!

Here is an introduction to a case study on the cleaning (washing) of a sukiya gate. We received a request to clean a sukiya gate that had become noticeably faded. After properly preparing the area, we carefully washed it and removed surface mold, followed by repainting to restore it to a condition close to its original state. Compared to before the cleaning, we did not make any changes to the area around the gate, but it feels like the surroundings have become brighter. [Case Overview] ■ Before Construction: Noticeable fading ■ Construction Details - Removed surface mold and other contaminants - Repainting, etc. ■ Result: The surroundings of the gate feel brighter *For more details, please refer to the related links or feel free to contact us.

• Gates, walls and fences

Carefully removing dirt, sanding the surface, and repainting! A case that has returned to a state close to when it was first installed.

We would like to introduce a case study of cleaning (washing) a sukiya gate. Before the work, while there were no decayed parts, the overall color fading and darkening were noticeable, giving a sense of the years since its installation. By carefully removing the dirt, sanding the surface, and repainting, we were able to restore the beautiful wood grain, bringing it back to a state close to when it was first installed. 【Case Overview】 ■Before the work: Overall color fading and darkening were noticeable ■Result: Restored beautiful wood grain, returning to a state close to when it was first installed *For more details, please refer to the related links or feel free to contact us.

• Gates, walls and fences

After carefully removing the dirt, it was repainted! A case of a beautiful white wood-colored Sukiya gate.

We would like to introduce a case study of cleaning (washing) a Sukiya gate. After many years since its installation, the aging dirt and fading of the Sukiya gate became noticeable. The fittings were temporarily removed, and after carefully removing the dirt, repainting was carried out. The gate has been restored to look as good as new, free of dark stains and dirt, and has become a beautiful white wood color. 【Case Overview】 ■ Work Details: The fittings were temporarily removed, and after carefully removing the dirt, repainting was done. ■ Results - The dark stains and dirt have been eliminated, making it look as if it has been newly made. - The Sukiya gate has become a beautiful white wood color. *For more details, please refer to the related links or feel free to contact us.

• Gates, walls and fences

It has been revived with a beautiful wood grain that appears as if it has been newly crafted, brightening the area around the gate.

We would like to introduce a case study of the cleaning (washing) of a sukiya gate. We received a request for cleaning a sukiya gate that had noticeable darkening due to years of fading and dirt. By carefully removing dirt down to the details and polishing it, we restored its appearance to that of when it was first installed. The beautiful wood grain emerged as if it had been newly constructed, revitalizing the bright surroundings of the gate. [Case Overview] - Carefully removed dirt down to the details and polished it - Restored its appearance to that of when it was first installed - The beautiful wood grain emerged as if it had been newly constructed, revitalizing the bright surroundings of the gate *For more details, please refer to the related links or feel free to contact us.

• Gates, walls and fences

Proud of the skilled hands of master craftsmen who inherit a keen eye for trees and tradition!

We would like to introduce examples of construction for Japanese-style earthquake-resistant houses. Our group takes pride in the skilled craftsmanship of master artisans who inherit a keen eye for wood and tradition. You can also view construction images through the related links. Feel free to consult us about anything related to exteriors, including earthquake-resistant exteriors, seismic reinforcement, the Japanese-style gate "Sukiya-mon," installation work, delivery times, or individual inquiries. 【Case Overview】 ■ Construction Content: Japanese-style earthquake-resistant house ■ We take pride in the skilled craftsmanship of master artisans who inherit a keen eye for wood and tradition. *For more details, please refer to the related links or feel free to contact us.

• Gates, walls and fences

Utilizing the techniques of sukiya-style construction! A wooden fence to separate the entrance approach and the courtyard.

We would like to introduce a case study of a custom wooden fence installation. Utilizing the techniques of sukiya-style gate construction, we manufactured and delivered a wooden fence to separate the entrance approach from the courtyard. All components except for the paneling were prepared in the factory, and finishing work was carried out on-site after installation. The installation time was approximately 5 hours. 【Case Overview】 ■ Approximately W4,600 × H2,000 mm ■ Installation time was about 5 hours *For more details, please refer to the related links or feel free to contact us.

• Gates, walls and fences

There is no feeling of pressure, and you can feel the warmth of natural wood! Crafted carefully by a skilled artisan who makes fittings and other items.

We would like to introduce a case study of office partition installation. Partitions were manufactured and delivered for a certain company to divide their office space. This time, high-quality Hiba wood was used to create a partition with a bright and gentle texture, crafted carefully by a master who also creates traditional Japanese sliding doors. The front side features a lattice design to evoke a Japanese atmosphere. The back side is kept simple, allowing for a full appreciation of the gentle wood texture. By using Hiba wood, the overall office remains bright, and the combination of the partition with indoor plants is excellent. 【Case Overview】 - High-quality Hiba wood used - Front side features a lattice design for a Japanese feel - Back side is simple, allowing for a full appreciation of the gentle wood texture *For more details, please refer to the related links or feel free to contact us.

• Gates, walls and fences

A symbol of Japanese culture! A dignified wall complements a genuine Shoin-style house.

We would like to introduce examples of Sukiya-style and Shoin-style construction. We combined an elegant fence with a genuine Shoin-style residence. Sukiya-style and Shoin-style are symbols of Japanese culture. Feel free to consult us about anything related to exteriors, including seismic-resistant exteriors, seismic reinforcement, the Japanese-style gate "Sukiya-mon," installation work, delivery times, and individual consultations. [Case Overview] ■ Combined an elegant fence with a genuine Shoin-style residence ■ Symbol of Japanese culture *For more details, please refer to the related links or feel free to contact us.

• Gates, walls and fences

We had the honor of manufacturing the shrine building for Akiba Shrine located in Gifu Prefecture!

We would like to introduce a case study of construction at a shrine. We manufactured the main hall of Akiba Shrine, which is adjacent to the famous Nemeido Shrine, commonly known for "Monet's Pond," located in Itadori, Seki City, Gifu Prefecture. Construction images are also available in the related links. Feel free to consult us about any inquiries related to exterior construction, including seismic exteriors, seismic reinforcement, and the traditional Japanese gate "Sukiya-mon," as well as installation work, delivery times, and individual consultations. 【Case Overview】 ■Location: Gifu Prefecture ■Construction Site: Main Hall of Akiba Shrine *For more details, please refer to the related links or feel free to contact us.

• Gates, walls and fences

Due to aging, repair work! Carefully sand the surface, repair any corroded areas, and repaint.

We would like to introduce a case study of the repair of the Karamuki Gate at Gifu Castle. Due to the aging of the Karamuki Gate, which is on the way to Gifu Castle, we were commissioned to carry out repair work. Before the work, the entire gate showed significant signs of age, including mold and dirt, and there were areas that had decayed. However, after the work, we carefully scraped the surface, repaired the corroded areas, and repainted it, restoring the gate to its dignified appearance. 【Case Overview】 ■Before - Significant signs of age, including mold and dirt throughout - Some areas had decayed ■After - Carefully scraped the surface, repaired the corroded areas, and repainted - Restored the dignified appearance of the gate *For more details, please refer to the related links or feel free to contact us.

• Gates, walls and fences

Create a special space with a sense of luxury! Using "naguri-itai," which leaves unique chisel marks on the surface.

We would like to introduce a case study of a traditional Japanese-style gate at a hotel entrance. For the entrance gate of the hotel, we manufactured and delivered an original design of a Japanese-style gate along with wooden fencing. The wooden fence, installed adjacent to the gate, uses "naguri-bari," which leaves a unique chiseled texture on its surface. After the gate was installed, the construction company completed the finishing work, and the entrance was completed. The Japanese-style gate creates a luxurious and special atmosphere. 【Case Overview】 ■ Approximately W5,460 × H3,090 × D1,235 mm (roof dimensions) ■ Roof: Fully tiled ■ Installation time: About 3 hours (including wooden fencing) *For more details, please refer to the related links or feel free to contact us.

• Gates, walls and fences

An example of a sukiya gate used as a shooting spot for pre-wedding photos and other occasions!

We would like to introduce a case study of a custom Sukiya gate in an antique color installed in front of the garden of a wedding venue. It can also be used as a photo spot during pre-wedding shoots. When the gate is closed, it has a sense of heaviness. When the doors are opened, the gate serves as a frame, enhancing the beauty of the garden viewed from the gate. 【Case Overview】 ■ Installed in front of the garden of a wedding venue ■ Custom Sukiya gate in an antique color ■ Sense of heaviness when closed, serves as a frame when opened *For more details, please refer to the related links or feel free to contact us.

• Gates, walls and fences
• Fences and gateposts

A sukiya gate combined with a steel frame structure! A case of direct delivery to the site as a single unit.

We would like to introduce a case where we manufactured and delivered a custom Sukiya gate with a service entrance. On the day of delivery, the weather was bad, but the installation work was completed in a few hours. After installing the Sukiya gate, the construction company carried out finishing work such as tile installation, and it was completed. The area around the gate was finished with a gentle Japanese atmosphere, utilizing existing pine trees and other plantings. [Case Overview] ■ Sukiya gate combined with a steel structure ■ Direct delivery to the site as a single unit ■ Installation work completed in a few hours ■ Area around the gate finished with a gentle Japanese atmosphere, utilizing existing pine trees and other plantings *For more details, please refer to the related links or feel free to contact us.

• Gates, walls and fences
• Fences and gateposts

Introducing a case that has been completed to evoke the essence of harmony and the beauty of wabi-sabi in the gate area!

We would like to introduce a case where we manufactured and delivered the "Sukiya Gate Gable Type 1." Although it is small in size, it features a gate area that conveys the essence of Japanese aesthetics and the beauty of wabi-sabi. Please feel free to consult us about anything related to exteriors, including seismic-resistant exteriors, seismic reinforcement, the Japanese-style gate "Sukiya Gate," installation work, delivery times, and individual inquiries. 【Case Overview】 ■ Manufactured and delivered Sukiya Gate Gable Type 1 ■ Color is a chic antique finish ■ Although small, it conveys the essence of Japanese aesthetics and wabi-sabi in the gate area *For more details, please refer to the related links or feel free to contact us.

• Gates, walls and fences
• Fences and gateposts

The gate is a custom-made double door! This is an example where the gate was installed after the side walls were constructed.

We would like to introduce a case of a custom order for a "Sukiya-style gate, Type 1 with a gabled roof." The side walls were constructed first, followed by the installation of the gate. After the gate was installed, the contractor completed the finishing work. The white wood-colored Sukiya gate blends gently and warmly into the ivory-toned exterior, creating a bright entrance when combined with the greenery of the plants. 【Case Overview】 - The side walls were constructed first, followed by the installation of the gate. - White wood-colored Sukiya gate. - It creates a gentle and warm impression within the ivory-toned exterior. - The gate is installed at the top of a single step, reflecting the beauty of traditional Japanese aesthetics. - The gate door is a custom-made sliding door. *For more details, please refer to the related links or feel free to contact us.

• Gates, walls and fences
• Fences and gateposts

Introducing examples that achieve both securing traffic flow and preventing disasters caused by earthquakes and other events!

We would like to introduce a case study of FIT Power installation in a newly built private residence. In this instance, at the request of the homeowner, the flow from the service entrance to the single door next to the parking lot was poor. To resolve this issue, they chose FIT Power. Instead of removing all the support walls, we replaced two support walls from the single door to the service entrance with FIT Power, achieving both a secure flow and disaster prevention from earthquakes and other hazards. [Case Overview] ■ Replaced two support walls from the single door to the service entrance with FIT Power ■ Achieved both a secure flow and disaster prevention from earthquakes and other hazards *For more details, please refer to the related links or feel free to contact us.

• Reinforcement and repair materials

Introducing a case where FIT Power was adopted for seismic reinforcement of the boundary wall of a substation!

We would like to introduce a case study of FIT Power installation at a substation. Installed on both the road side and the property side. FIT Power was adopted for the seismic reinforcement of the boundary wall. Feel free to consult us about anything related to exteriors, including seismic exteriors, seismic reinforcement, the Japanese-style gate "Sukiya-mon," installation work, delivery times, and individual inquiries. 【Installation Locations】 ■ Road Side ■ Property Side *For more details, please refer to the related links or feel free to contact us.

• Reinforcement and repair materials

Introducing examples of how we were able to ensure the safety of environments where small children live in a relatively short period of time!

Here is an introduction to a case study of FIT Power installation at a nursery school. FIT Power was installed for seismic reinforcement. It was possible to achieve seismic retrofitting without narrowing the parking spaces or pathways. From the parking area, only the angle columns are visible, and they do not stand out much, thus not harming the landscape. 【Effects】 ■ Achieved seismic retrofitting without narrowing parking spaces or pathways ■ Does not stand out much and does not harm the landscape ■ Ensured the safety of the environment where small children live *For more details, please refer to the related links or feel free to contact us.

• Reinforcement and repair materials

We would like to introduce a case where the FIT Power 20 model (made to order) was installed for seismic reinforcement of boundary walls!

Here is an introduction to a case study of FIT power installation in a condominium. On the property side, there is a bicycle parking area, but it does not become cramped, allowing for parking as usual. On the neighboring side, a road and a neighboring plate have been installed. The plate is thin, so it does not obstruct passage, and the construction can be completed in a short period, allowing for seismic reinforcement work that takes into consideration the lives of the condominium residents and nearby neighbors. 【Case Overview】 ■ Bicycle parking can be done as usual without feeling cramped. ■ Seismic reinforcement work can be carried out with consideration for the lives of the condominium residents and nearby neighbors. *For more details, please refer to the related links or feel free to contact us.

• Reinforcement and repair materials

Supports long-lasting walls! Since it is a made-to-order product, the manufacturing lead time is approximately up to 1 month.

We would like to introduce a case study of FIT power installation with a ten-thousand-year wall. One set is installed between the columns. As this is a made-to-order product, the manufacturing lead time may take up to approximately one month. For details regarding lead times and other inquiries, please contact us. 【Features】 ■ One set installed between the columns ■ Manufacturing lead time is up to approximately one month *For more details, please refer to the related links or feel free to contact us.

• Reinforcement and repair materials

There are almost no protrusions! Here is an example installed on a permanent wall in a certain location in Tokyo.

We would like to introduce a case study of FIT Power installation for seismic reinforcement of the Mannen Wall. One set of FIT Power is installed between each pair of columns to implement seismic reinforcement. On the parking lot side, only the plates are visible, and there are hardly any protrusions, allowing the parking space to remain the same size as before. On the site side, angle supports have been installed. 【Case Overview】 ■ One set installed between each pair of columns ■ Parking space can be used at the same size as before *For more details, please refer to the related links or feel free to contact us.

• Reinforcement and repair materials

Since large-scale construction such as demolition and removal is not required, it is possible to complete the work in a short period!

Here is an introduction to a case study of FIT power installation at a kindergarten. Although there was a retaining wall separating the kindergarten from the neighboring property, it was not installed at the appropriate pitch, so additional reinforcement was carried out using FIT power. Since the protrusion is smaller than the retaining wall, the children can play as they always have without feeling any discomfort. 【Case Overview】 ■ Additional reinforcement of the retaining wall separating the kindergarten from the neighboring property ■ Additional reinforcement of the wall near the playground equipment ■ Children can play as they always have without feeling any discomfort *For more details, please refer to the related links or feel free to contact us.

• Reinforcement and repair materials

Introducing a case where a block wall built in an alternating pattern was able to accommodate standard sizes!

We would like to introduce a case study of FIT power installation in a rental apartment. There were block walls of varying heights built alternately, but there were no retaining walls, posing a risk of toppling during an earthquake. However, since it faced the parking lot, constructing new retaining walls would have compromised convenience, and rebuilding would have significantly exceeded the budget, leading to hesitation in taking measures. After the installation, there were no large-scale construction works, and the construction costs were kept low due to the reduced scope of work. The pathway can be used without any differences from before. 【Case Overview】 ■ Issues - There were no retaining walls for the block walls of varying heights, posing a risk of toppling during an earthquake. - New construction would compromise convenience and exceed the budget significantly. ■ Solutions - There were no large-scale construction works, and construction costs were kept low due to the reduced scope of work. - Standard sizes were used to accommodate the alternately built block walls. *For more details, please refer to the related links or feel free to contact us.

• Reinforcement and repair materials

Completion of a Sukiya-style gate at the factory! Introducing examples of renovation work carried out by our company.

This is a case study of a renovation project for a garage, with the main residence being 20 years old. We completed the sukiya gate at our factory, and there were concerns about the junction with the boundary wall on the right and the roof of the barn on the left. The installation was done using a crane, and we paid close attention to avoid interference with the left roof, but it was successfully installed. The client praised us, saying, "As expected of a pioneer in sukiya gates." 【Case Overview】 ■ Client: K residence - Custom sukiya gate ■ Size: W8200 × D2400 ■ Specifications: Garage entrance and service entrance ■ Garage size: Doorway for garage entrance 5300 × H2200 with automatic function ■ Entrance size: Service entrance W1570 × H2050 sliding door *For more details, please refer to the related links or feel free to contact us.

• Gates, walls and fences

We would like to introduce a case where we delivered a majestic sukiya gate that embodies the "Lord's posture"!

We would like to introduce a case study of a Sukiya gate construction that we carried out. Incorporating the client's preferences to the fullest, the main house is a complete Sukiya-style building that is 40 years old. Considering the harmony with the house and garden, we proposed the Sukiya gate and the surrounding stairs. The photos included were taken one year after installation. We delivered a dignified Sukiya gate that embodies the "master's stance." 【Case Overview】 ■ Residence of Mr. I: Custom Sukiya Gate ■ Size: W4500×D2400 ■ Specifications: Side with post function W600 ■ Garage Size: Door W1800×H2000 with double doors on both sides, effective opening W1800 ■ Entrance Size: Sliding door W800×H2000 with electric lock function W4500×D2400 *For more details, please refer to the related links or feel free to contact us.

• Gates, walls and fences

We will introduce a case where a sleeve fence tailored to the gate was manufactured in our factory and installed together with a sukiya gate!

We would like to introduce a case where we manufactured and delivered a Sukiya gate and side fence in conjunction with the renovation of a private residence's gate. The gate was delivered in its completed form, reducing on-site work. After installation, the finishing work was carried out by the contractor, resulting in completion. The side fence, designed to match the gate, was also manufactured in our factory and delivered together with the Sukiya gate. [Case Overview] ■ The gate was delivered in its completed form, reducing on-site work. ■ After installation, the finishing work was carried out by the contractor, resulting in completion. ■ The side fence, designed to match the gate, was also manufactured in our factory and delivered together with the Sukiya gate. *For more details, please refer to the related links or feel free to contact us.

• Gates, walls and fences

Installation completed in about 5 to 6 hours! Here is an example of a request we received for a personal residence's gate.

We would like to introduce a case study of a Sukiya gate construction carried out by our company. A large custom Sukiya gate measuring approximately W9,000 x H3,200 was directly delivered to the site in its completed form, and installation was completed in about 5 to 6 hours. After installation, the contractor performed finishing work such as tile installation, and the project was completed. The Japanese-style fence was measured again after the gate was installed, and was manufactured and delivered later. [Case Overview] - A large custom Sukiya gate measuring approximately W9,000 x H3,200 was directly delivered to the site in its completed form. - The contractor performed finishing work such as tile installation, and the project was completed. - The Japanese-style fence was measured again after the gate installation, and was manufactured and delivered later. - An additional crown wood gate was also manufactured and delivered. *For more details, please refer to the related links or feel free to contact us.

• Gates, walls and fences

The roof dimensions are approximately W4,100 × H3,000 × D1,800 mm! Here is an example designed to make the electrical wiring less noticeable.

We would like to introduce a case where we manufactured and delivered a gable roof entrance, with both side walls made using FIT WALL and installed on-site. The entrance is equipped with an electric lock to make opening and closing the door easier, and the electrical wiring has been designed to be unobtrusive. Please feel free to contact us if you have any inquiries. 【Case Overview】 ■ Manufactured and delivered a gable roof entrance ■ Both side walls made with FIT WALL and installed on-site ■ Designed to conceal electrical wiring ■ Roof dimensions: approximately W4,100 × H3,000 × D1,800 mm *For more details, please refer to the related links or feel free to contact us.

• Gates, walls and fences

Even though it's a newly built exterior, you can still feel a sense of charm! Introducing examples of Sukiya-style gate construction.

A sukiya gate installed at a private residence was showcased at an exhibition, where it caught the attention of a customer who decided to incorporate it as the "face of the house." After installation, the contractor coordinated the overall design in a black color scheme, resulting in a chic exterior design that evokes a sense of Japanese aesthetics. The sukiya gate blends well with the historically rich area, allowing for an appreciation of its charm despite being part of a new construction. 【Case Overview】 - The overall design was unified in a black color scheme, achieving a chic exterior that conveys a sense of Japanese style. - Despite being part of a new construction, it retains a sense of character. *For more details, please refer to the related links or feel free to contact us.*

• Gates, walls and fences

We present a case where the approach highlights the changing expressions of the plantings throughout the four seasons!

We would like to introduce a case where a custom Sukiya gate was installed in the exterior renovation of a private residence. Since the installation location was far away, we arranged for a rough-terrain crane truck through the construction company to carry out the installation. The craftsman built the completed form in the factory, leaving the wall finishing and other details, and the installation was completed with the fittings attached. [Case Overview] ■ The completed form was built by a craftsman in the factory, leaving the wall finishing and other details. ■ The finishing was done by the construction company, resulting in completion. ■ An approach was created that highlights the changing expressions of the landscaping throughout the seasons. *For more details, please refer to the related links or feel free to contact us.

• Gates, walls and fences

Introducing a case of a custom-made Japanese-style gate called "Buke Yashiki Mon," which is not a Sukiya Mon!

We would like to introduce a case where a custom Japanese-style gate was delivered to a certain location in Nara Prefecture. Materials were prepared in our factory, and assembly was carried out on-site over several days. We manufactured a custom Japanese-style gate, referred to as a "Buke Yashiki Mon," which harmonizes with a large mansion suitable for a residence. Additionally, we also produced a custom Japanese-style fence and a FIT welcoming gate to match the gate, completing an entrance area that emphasizes a Japanese atmosphere. [Case Overview] - Assembly carried out on-site over several days - Approximately W4,350 × H3,800 mm - Custom Japanese-style fence and FIT welcoming gate produced to match the gate *For more details, please refer to the related links or feel free to contact us.

• Gates, walls and fences

Introducing a case where a boundary wall was manufactured using the original seismic-resistant wall "FIT WALL"!

We would like to introduce a case where the desire to preserve the traditional Japanese atmosphere of the client was realized through the entrance area centered around a Sukiya gate, in conjunction with a residential renovation. The boundary wall installed along the Sukiya gate is made from the original seismic-resistant wall "FIT WALL." From the property side, the gate offers a view of the garden, which is planted with lush greenery that showcases different expressions throughout the seasons. [Case Overview] ■ Approximately W4,800 × H2,800 mm ■ Lush greenery that presents different expressions throughout the seasons *For more details, please refer to the related links or feel free to contact us.

• Gates, walls and fences

Introducing a case of installing a custom-made Sukiya gate with a gabled roof type 3 in a certain location in Kyoto Prefecture!

We would like to introduce a case study of a Sukiya gate construction carried out by our company. The gate was built in our factory, and after installation, tile work was conducted on-site. The finishing work, including exterior construction, was completed by the contractor, resulting in a gate area that exudes a gentle Japanese atmosphere. Please feel free to contact us when you need our services. 【Case Overview】 ■ Sukiya Gate, custom-made type with a gabled roof ■ Approximately W3,650 × H2,720 mm ■ Installation time is about 4 hours *For more details, please refer to the related links or feel free to contact us.

• Gates, walls and fences

Introducing a case where we manufactured and delivered a waiting room for a private residence!

We would like to introduce a case study of a Sukiya-style gate construction that we conducted. Materials were prepared in our factory, and assembly work was carried out on-site. The foundation work for installation and the erection of rebar for welding were performed by the contractor. The main material used is heartwood from the Chamaecyparis obtusa, similar to the Sukiya-style gate, and the wall sections were treated with FIT WALL to provide a waterproof substrate before installation. [Case Overview] ■ Approximately W2,660 × H2,480 mm (roof dimensions) ■ The main material is heartwood from the Chamaecyparis obtusa, similar to the Sukiya-style gate ■ The wall sections were treated with FIT WALL to provide a waterproof substrate before installation ■ After installation, the contractor applied finishing paint to the walls, completing the project *For more details, please refer to the related links or feel free to contact us.

• Gates, walls and fences

Introducing examples of entrances finished in a lush, green, and charming Japanese style!

We would like to introduce a case where a custom sukiya gate was manufactured and delivered as the entrance gate for a hotel that opened in a certain location in Tokyo. Materials were prepared in the factory, and assembly work was carried out on-site. This time, we were also commissioned for tile work, using original tiles featuring the hotel’s logo. Although the hotel is located in the city, it has been finished with a lush, tasteful Japanese-style entrance. [Case Overview] ■ Approximately W4,200 × H2,700 mm ■ Original tiles featuring the hotel’s logo were used ■ Finished with a lush, tasteful Japanese-style entrance *For more details, please refer to the related links or feel free to contact us.

• Gates, walls and fences

Designed with modifications for fire prevention areas, ensuring that the columns do not interfere with the steel frame base!

We would like to introduce a case where we manufactured and delivered a combination of a passage gate and a shutter gate at FIT GATE. Due to the limited depth from the site to the residence, we adopted an exposed type shutter case and integrated the passage gate and shutter gate to create a smart gate. After the installation of the structure, the contractor completed the wall finishing, resulting in a gate that harmonizes with the residence. 【Case Overview】 ■ Dimensions: Approximately W7,250 × H3,115 mm ■ Installation Time: Approximately 6 hours *For more details, please refer to the related links or feel free to contact us.

• Gates, walls and fences

The shutter gate is manufactured as a case exposure type! The roof of the passageway section is designed with GL steel plate roofing.

We would like to introduce a case where a passage gate and shutter gate were manufactured and delivered at FIT GATE. The passage gate and shutter gate were designed to fit within the eaves height of the residence and were manufactured and delivered as a single unit. After the structure was installed, finishing work was carried out by the contractor, and tiles were applied to the wall, highlighting the bright color of the wood-grain shutter. 【Case Overview】 ■ Dimensions: Approximately W6,050 × H2,635 mm ■ Installation Time: Approximately 6 hours *For more details, please refer to the related links or feel free to contact us.

• Gates, walls and fences

The body with casters was manually pushed in! Connection work was carried out, and the installation is complete.

We would like to introduce a case where we manufactured and delivered a FIT GATE that integrates a service gate and a shutter gate to a private residence in a certain location in Shizuoka Prefecture. Due to the narrow width of the road leading to the site, we unloaded the components at a slightly distant location and manually pushed the structure, which was equipped with casters, for transportation. After the structure was installed, the finishing work was carried out by the construction company, resulting in a chic gate area primarily in white and black. [Case Overview] ■ Dimensions: Approximately W9,820 × H2,925 mm ■ Installation Time: Approximately 4.5 hours *For more details, please refer to the related links or feel free to contact us.

• Gates, walls and fences

The gate, finished in a black theme, tightens the space with its simple design!

We would like to introduce a case where a gate that integrates a pedestrian gate and a shutter gate was manufactured and delivered by FIT GATE to a private residence in Aichi Prefecture. Due to the large size of the gate tailored to the width of the site, the pedestrian gate and shutter gate were manufactured separately, and connection work was carried out on-site. After the installation of the structure, finishing work such as tiling was performed by the construction company. The gate, finished in a black theme, tightens the space and, while having a simple design, enhances its luxury by extending the roof and changing the height. 【Case Overview】 ■ Dimensions: Approximately W9,185 × H2,925 mm ■ Installation Time: Approximately 5 hours *For more details, please refer to the related links or feel free to contact us.

• Gates, walls and fences

An example of a closed exterior structure finished with wood grain accents like shutters, creating a warm atmosphere!

We would like to introduce a case where we manufactured and delivered a FIT GATE that integrates a pedestrian gate and a shutter gate at a private residence in a certain location in Kyoto Prefecture. Due to the size of the large gate, it was manufactured in two parts: the pedestrian gate and the shutter gate, and assembly work was carried out on-site. The columns of the pedestrian gate are designed to be the same height as the shutter gate, creating a design that appears to penetrate through the roof. The wood-like siding of the eaves and the supplied downlights were installed in the factory before shipment. [Case Overview] ■ Dimensions: Approximately W10,700 × H2,925 mm ■ Installation Time: Approximately 4 hours *For more details, please refer to the related links or feel free to contact us.

• Gates, walls and fences

Due to the large gate, the access gate and shutter gate will be manufactured separately, and connection work will be carried out on-site!

We would like to introduce a case where we manufactured and delivered the FIT GATE, which integrates a general gate and a shutter gate. The roof was extended at the same height, and an optional rain gutter was installed on the general gate side to facilitate rainwater management. After the structure was installed, finishing work was carried out by the contractor. The gate was completed with a calm atmosphere and a sense of unity. 【Case Overview】 ■ Dimensions: Approximately W10,320 × H2,925 mm ■ Installation Time: Approximately 4 hours *For more details, please refer to the related links or feel free to contact us.

• Gates, walls and fences

The general entrance side features a slab roof designed for easy rainwater management!

We would like to introduce a case where a FIT GTAE, which integrates a service gate and a shutter gate, was manufactured and delivered to a private residence in a certain location in Osaka Prefecture. The effective opening height of the shutter was adjusted to fit the garage, and the siding was installed at the factory and shipped for the eaves of the service gate. The service gate was delivered as a unit, while the shutter gate was delivered with the columns and beams separated. After the installation of the structure, finishing work was carried out by the contractor, and the gate was completed. The same paint as the residential wall was applied, and tiles were affixed to the beams, resulting in a gate that conveys a sense of unity and brightness. [Case Overview] ■ Dimensions: Approximately W8,350 × H2,835 mm ■ Installation Time: Approximately 6 hours *For more details, please refer to the related links or feel free to contact us.

• Gates, walls and fences

A carport and roof are installed behind the gate, designed for an approach that stays dry in the rain!

We would like to introduce a case where a gate that integrates a service entrance and a shutter gate was manufactured and delivered at a certain location in Aichi Prefecture. Due to the effective opening height of H2,600mm, it was manufactured in sections and assembled on-site. After the installation of the frame, finishing work such as shutter installation and wall finishing was carried out by the contractor, and the gate was completed. The case exposure type allows for cost savings while creating the gate, and its smaller depth gives a neat impression. 【Case Overview】 ■ Dimensions: Approximately W9,510 × H3,225mm ■ Installation Time: Approximately 5 hours *For more details, please refer to the related links or feel free to contact us.

• Gates, walls and fences

A case where a design was requested to change the height of the shutter gate and the service entrance, as well as the eave projection.

Here is an example of the manufacturing and delivery of a passage gate and shutter gate at FIT GATE. A groove was processed on the ceiling of the passage gate to prevent rainwater from flowing inside. After the installation of the structure, the contractor completed the finishing work. The finishing materials and colors of the passage gate and shutter gate were differentiated, resulting in a simple and stylish gate that harmonizes with the residential area. 【Case Overview】 ■ Dimensions - Shutter Gate: Approximately W6,100 × H2,925 mm (Effective opening: W5,510 × H2,300 mm) - Passage Gate: Approximately W4,100 × H2,575 mm *For more details, please refer to the related links or feel free to contact us.

• Gates, walls and fences

The walls created with FIT WALL are adorned with decorations and lighting, creating an elegant entrance at night!

We would like to introduce a case where we manufactured and delivered a gate resembling the Arc de Triomphe along with a matching wall. After the installation of the structure, finishing work such as wall finishing was carried out by the contractor, and it was completed. Mosaic tiles were applied to the recessed areas, providing a refreshing accent. [Case Overview] - Manufactured and delivered a gate resembling the Arc de Triomphe along with a matching wall - After the installation of the structure, finishing work such as wall finishing was carried out by the contractor, and it was completed - Mosaic tiles were applied to the recessed areas, providing a refreshing accent *For more details, please refer to the related links or feel free to contact us.

• Other wall materials
• Gates, walls and fences

The general gate and the shutter gate are separate structures and are not connected, but they create a cohesive appearance around the gate area.

We would like to introduce a case where a gate and shutter gate that integrated a general-purpose gate and a privacy wall were manufactured and delivered. Multiple crane trucks delivered the items on the same day, and assembly work was conducted on-site. After the installation of the structure, finishing work was carried out by the contractor, and the gate was completed. The finishing materials for the wall were the same tiles and paint used for the residential exterior, creating a sense of unity. [Case Overview] ■ Dimensions - General-purpose gate + privacy wall: Approximately W10,150 × H2,925 mm - Shutter gate: Approximately W6,050 × H3,125 mm ■ Installation time: Approximately 6.5 hours *For more details, please refer to the related links or feel free to contact us.

• Other wall materials
• Gates, walls and fences

The garage gate is made of a combination of polycarbonate and features sliding doors with a frosted glass appearance!

We would like to introduce a case where we manufactured and delivered a custom gate that combines a sukiya-style gate and a FIT-style welcoming gate. Due to the large size of the custom piece, assembly work was carried out on-site, and finishing work such as wall painting was done by the contractor, resulting in completion. It became a Japanese-style garage gate that utilizes the atmosphere of traditional Japanese design, something that can only be created by our company. [Case Overview] ■ Dimensions: Approximately W12,700 × H3,420 mm (roof dimensions) *For more details, please refer to the related links or feel free to contact us.

• Gates, walls and fences

The roof is designed with a section cut out to allow the growing plants to emerge!

We would like to introduce a case where a gate finished in a southern country style was manufactured and delivered. The finishing paint and tile work were carried out by the contractor. The roof has been designed with a portion cut out to allow the growing plants to emerge. Please feel free to contact us when you need our services. 【Case Overview】 - The finishing paint and tile work were carried out by the contractor. - The roof has been designed with a portion cut out to allow the growing plants to emerge. *For more details, please refer to the related links or feel free to contact us.

• Gates, walls and fences

The left side is an elegant entrance, while the right side features a sharp entrance design!

Here is a case study of three shutter gates connected in a row at a residential development in Aichi Prefecture. The gates were manufactured in sections, and the assembly work was carried out on-site. By varying the finishing work, we achieved a sense of unity while creating gates that each have a distinct impression. Additionally, although the design of the two gates side by side is the same, by introducing variations in the exterior design, the left gate has an elegant appearance, while the right gate features a sharp design. [Case Overview] ■ Dimensions: Approximately W5,800 × H2,925 mm *For more details, please refer to the related links or feel free to contact us.

• Gates, walls and fences

While slightly changing the shape and finish, a simple design!

Here is a case study of a shutter gate installed in a row at a residential development in a certain location in Aichi Prefecture. While slightly varying the shapes and finishes, the simple design resulted in a cohesive and clean-looking shutter gate. Please feel free to contact us if you have any inquiries. [Case Overview] ■ Location: Residential development in a certain location in Aichi Prefecture ■ A cohesive and clean-looking shutter gate has been completed *For more details, please refer to the related links or feel free to contact us.

• Gates, walls and fences

Since the projection is smaller than the retaining wall, it can be installed while maintaining space without affecting the equipment!

We would like to introduce a case where a FIT Power permanent wall type was installed during the renovation of a permanent wall at a public facility in Aichi Prefecture. The lateral reinforcement was arranged by the construction company and was installed along with the FIT Power. By installing the FIT Power on the existing wall and retrofitting it for seismic resistance, we can complete the work in a shorter period with less extensive work compared to demolition and replacement. 【Case Overview】 ■ Location: Inside a public facility in Aichi Prefecture ■ Since the projection is smaller than that of a retaining wall, it can be installed while maintaining the usual space without affecting the equipment. *For more details, please refer to the related links or feel free to contact us.

• Gates, walls and fences

The impact on neighboring residents is minimal, and the seismic reinforcement work can be completed in a short period!

We would like to introduce a case where FIT Power was adopted for the seismic reinforcement of a concrete block wall for a certain company. Due to the adjacent apartment building, it was difficult to carry out extensive construction work. FIT Power can reinforce the existing block wall as it is, so although excavation work is necessary, it has less impact on neighboring residents compared to demolition and replacement work, allowing for the seismic reinforcement to be completed in a short period of time. 【Case Overview】 ■ Challenges - It was difficult to carry out extensive construction work due to the adjacent apartment building. ■ Results - Although excavation work was necessary, it had less impact on neighboring residents compared to demolition and replacement work, and the seismic reinforcement was completed in a short period of time. *For more details, please refer to the related links or feel free to contact us.

• Gates, walls and fences

The installation period is shorter compared to demolition work, allowing for consideration of the users as well.

Here is a case study where FIT Power was installed on the boundary wall of a coin parking lot. Due to the difficulty of dismantling and removing structures for exhaust gas measures, and the desire to maintain as much parking space as possible, it was decided to use FIT Power for seismic reinforcement instead of a retaining wall that would protrude significantly and reduce space. The protrusion of the angle on the property side is approximately 65mm, allowing for seismic reinforcement while maintaining the parking space. [Case Overview] ■ Issues - Dismantling and removal are difficult due to exhaust gas measures, and there is a desire to maintain as much parking space as possible. ■ Results - The protrusion of the angle on the property side is approximately 65mm, allowing for seismic reinforcement while maintaining the parking space. *For more details, please refer to the related links or feel free to contact us.

• Gates, walls and fences

A case where the conventional site space has been maintained even after installation!

This is an example of the seismic reinforcement of a block wall located within the grounds of a certain high school in Saitama Prefecture, where FIT Power (standard specification model 18) was adopted. Although a retaining wall was installed on the block wall, FIT Power was added as additional reinforcement. FIT Power has a smaller projection than the existing retaining wall, allowing the original site space to be maintained even after installation. 【Case Overview】 ■ Location: Within the grounds of a certain high school in Saitama Prefecture ■ There is a road and a neighboring plate installed on the adjacent side, but there is no projection that narrows the site, and it does not stand out too much. *For more details, please refer to the related links or feel free to contact us.

• Gates, walls and fences

It is inconspicuous in appearance and neat! The image of the gate so far remains the same.

We would like to introduce a case where FIT Power was implemented at a private residence. With the new carport installation, the gate pillar on the right side of the front became a standalone column. Given that this could lead to collapse damage in the event of an earthquake, we applied seismic reinforcement using FIT Power. The reinforcement is unobtrusive and maintains a clean appearance, preserving the original image of the gate. 【Case Overview】 ■ FIT Power typically accommodates block thicknesses up to 150mm, but in this case, we used a thickness of 250mm. *For more details, please refer to the related links or feel free to contact us.

• Gates, walls and fences
• Fences and gateposts

The lattice material for the roof decoration and the downlights were installed during manufacturing along with the ceiling siding as supplied items!

Here is an example of a rental housing entrance gate manufactured and delivered by FIT GATE. The left column was manufactured in a section that is higher than the roof and connected on-site. The lattice material for the roof decoration and the downlights were installed during manufacturing along with the ceiling siding. After the structure was installed, finishing work was carried out by the contractor, completing the entrance gate. The arch gate divides the space, creating an elegant entrance. 【Case Overview】 ■ Dimensions: Approximately W7,875 × H3,715mm (total length) ■ Installation time: Approximately 3 hours *For more details, please refer to the related links or feel free to contact us.

• Gates, walls and fences
• Fences and gateposts

A design with a rounded roof! Manufactured in a shape that appears to split the structure front and back, and connected on-site.

We would like to introduce a case where we manufactured and delivered the FIT GATE as an entrance gate for a rental housing complex. The rounded roof is a design unique to the FIT GATE, manufactured in a shape that appears to split the structure front and back, and connected on-site. The downlights were supplied by the client, while the piping for security cameras and other installations was done in our factory. The mailbox and other features were processed with cutouts, and the installation was carried out by the construction company. 【Case Overview】 ■ Dimensions: Approximately W7,050 × H2,900 × D2,825 mm ■ Manufactured in split sections for the front and back of the structure ■ Installation time: Approximately 5 hours ■ Finished as an elegant entrance gate *For more details, please refer to the related links or feel free to contact us.

• Gates, walls and fences
• Fences and gateposts

The general gate and boundary fence are both made of a steel frame structure! Designed with a slit processing incorporated into the design.

We would like to introduce a case where the entrance gate of a private residence was manufactured and delivered using FIT GATE, followed by the wall (fence) made with FIT WALL. Both were designed with slit processing incorporated, and both the entrance gate and boundary wall are constructed with a steel frame. After the main structure was installed, the finishing of the wall and the installation of fixtures were carried out by the contractor, completing the gate. 【Case Overview】 ■ Entrance Gate: Approximately W5,010 × H2,940 mm ■ Boundary Wall: Approximately W2,200 × H1,900 mm *For more details, please refer to the related links or feel free to contact us.

• Gates, walls and fences
• Fences and gateposts

Delivery boxes and electrical conduits are installed with supplied materials during manufacturing in the factory! Introducing construction examples.

Here is an example of a general entrance gate manufactured and delivered by FIT GATE, connected to the entrance porch. The dimensions are approximately W3,750×H2,590mm. Delivery boxes, embedded mailboxes, and electrical conduits were installed with supplied items during manufacturing in the factory. The installation of intercoms and other equipment was carried out by the construction company. [Case Overview] ■ Dimensions: Approximately W3,750×H2,590mm *For more details, please refer to the related links or feel free to contact us.

• Gates, walls and fences
• Fences and gateposts

The installation time is about 4 hours! Here is an example of a general gate that was installed by connecting and integrating with pipes.

We would like to introduce a case where we manufactured and delivered a gate with a modified roof height at FIT GATE. The embedded post, delivery box, and downlights were installed during manufacturing in the factory, and after installing the integrated gate connected by pipes, the contractor completed the finishing work such as wall finishing, resulting in completion. The gate was finished with an exterior similar to that of the house, creating a cohesive look. [Case Overview] ■ Dimensions: Approximately W3,480 × H2,755mm (at the highest point) ■ Installation time: Approximately 4 hours *For more details, please refer to the related links or feel free to contact us.

• Gates, walls and fences
• Fences and gateposts

Large structure approximately W10,000×H3,125×D1,130mm! Installation work will be completed in about 5 to 6 hours.

We would like to introduce a case where we manufactured and delivered the FIT GATE as a general-purpose door and shutter gate. The large structure measures approximately W10,000×H3,125×D1,130mm, and was manufactured in several parts, which were then connected on-site. The installation work was completed in about 5 to 6 hours. 【Case Overview】 ■ Dimensions: Approximately W10,000×H3,125×D1,130mm ■ Installation Time: Approximately 5 to 6 hours *For more details, please refer to the related links or feel free to contact us.

• Gates, walls and fences
• Fences and gateposts

The sense of pressure unique to large gates has been reduced! An example of a luxurious closed exterior structure.

We would like to introduce a case where we manufactured and delivered a gate that integrates a general access gate and a shutter gate. In the side walls of the general access gate, some space was left open, and recessed processing was applied to reduce the sense of pressure typical of large gates. After the installation of the structure, finishing work was carried out by the construction company, with tiles applied to the wall surface, making the connection points completely unobtrusive. 【Case Overview】 ■ Dimensions: Approximately W9,500 × H2,925 mm ■ Installation Time: Approximately 4.5 hours *For more details, please refer to the related links or feel free to contact us.

• Gates, walls and fences
• Fences and gateposts

By unifying the height, a sense of cohesion is enhanced, creating an elegant entrance that highlights the beauty of white and wood grain!

We would like to introduce a case where a gate and shutter gate were delivered to a private residence in Aichi Prefecture. Due to the large size of the gate, we manufactured a split structure combining FIT GATE and FIT HIGH-WALL, and performed the connection work on-site. After the structure was installed, the construction company proceeded with the installation of vertical bars, gate doors, beams, and finishing work such as wall finishing. 【Case Overview】 ■ Dimensions: Approximately W11,285 × H2,925 mm ■ Installation Time: Approximately 6 hours ■ Adjusted the position of the steel base ■ Reinforcement added to the substrate *For more details, please refer to the related links or feel free to contact us.

• Gates, walls and fences
• Fences and gateposts

The total length is approximately W10,450 × H2,925mm! A case where a chic impression of the gate area has been completed.

We would like to introduce a case where we manufactured and delivered a passage gate and a shutter gate at FIT GATE. The total dimensions are approximately W10,450 × H2,925 mm. The delivery box was shipped after the supplied items were installed, and the installation time was about 4 hours. After installation, finishing work such as tiling and decoration was carried out by the construction company, resulting in a chic impression around the gate. [Case Overview] ■ Shutter Gate: W6,050 × H2,925 mm ■ Passage Gate: Approximately W4,400 × H2,925 mm (at the highest point) *For more details, please refer to the related links or feel free to contact us.

• Gates, walls and fences
• Fences and gateposts

The universal door has a slab roof! It features a shutter exposure type structure with the shutter case visible from the back.

We would like to introduce a case where a gate that integrates a general access gate and a shutter gate was manufactured and delivered by FIT GATE. The roof of the access gate features a slab roof with some cut-out processing, and the structure is of the shutter exposure type, allowing the shutter case to be visible from the back. After the structure was installed, finishing work such as wall tiling and fixture installation was carried out by the construction company, and it was completed. 【Case Overview】 ■ Dimensions: Approximately W11,400 × H2,925 mm (total length) ■ Installation Time: Approximately 7 hours *For more details, please refer to the related links or feel free to contact us.

• Gates, walls and fences
• Fences and gateposts

Manufactured and delivered as one unit! Designed with consideration to ensure that the steel base does not interfere with gate posts and meters.

We would like to introduce a case where a gate that integrates a general-purpose door and a shutter gate was manufactured and delivered as a single unit. The design was carefully considered to ensure that the steel frame base does not interfere with the gate posts and meters. After the installation of the structure, the finishing work was carried out by the construction company, resulting in a gate that harmonizes with the residence and has a natural impression. 【Case Overview】 ■ Dimensions: Approximately W6,230 × H2,925 mm *For more details, please refer to the related links or feel free to contact us.

• Gates, walls and fences
• Fences and gateposts

Manufactured separately! Here we introduce a case where delivery was made on the same day and connection work was carried out on-site.

We would like to introduce a case where a gate that integrates a general-purpose gate and a shutter gate was manufactured and delivered as a FIT GATE, and a tall fence for partitioning the passage was produced and delivered as a FIT HIGH-WALL. Each component was manufactured separately, and they were delivered on the same day for connection work on site. After the installation of the structure, the contractor completed the finishing work, resulting in a high-quality, aesthetically pleasing gate. 【Case Overview】 ■ General-purpose gate + shutter gate: Approximately W7,050 × H2,925 mm ■ Fence: Approximately W9,550 × H3,075 mm, approximately 8,000 × H2,325 mm ■ Installation time: Approximately 4 hours *For more details, please refer to the related links or feel free to contact us.

• Gates, walls and fences
• Fences and gateposts

Designed to fit the shape of the site! A case where columns, beams, and the entrance gate were manufactured separately and connected on-site.

Here is an example of the manufacturing and delivery of the FIT GATE as a general gate and shutter gate. The original gate for the shutter gate, which exceeds W10,000mm, was designed to fit the shape of the site. The columns, beams, and general gate were manufactured separately and connected on-site, with an installation time of approximately 7 hours. Tiles that matched the color of the building and approach were installed by the contractor, resulting in a cohesive gate design. 【Case Overview】 ■ Installation Time: Approximately 7 hours *For more details, please refer to the related links or feel free to contact us.

• Gates, walls and fences
• Fences and gateposts

W8,050×H3,455mm (at the highest point)! A design where the height changes from the tall pillar towards the entrance.

We would like to introduce a case where we manufactured and installed a service gate and shutter gate for a private residence. The design features a height variation leading from the tall column of H3,455mm towards the service gate. The color of the beam connecting the shutter gate and the service gate was changed, resulting in a simple yet stylish gate. 【Case Overview】 ■Dimensions: W8,050×H3,455mm (at the highest point) ■Installation Time: Approximately 3 hours *For more details, please refer to the related links or feel free to contact us.

• Gates, walls and fences
• Fences and gateposts

Designed with consideration for the arrangement of the steel frame base! A simple and smart closed exterior.

We would like to introduce a case where we manufactured and delivered a passage gate and shutter gate at FIT GATE. Since FIT GATE is made of a steel frame structure and a wooden structure, we designed it with consideration for the steel frame-based layout. Due to the large structure, it was manufactured in sections, and connection work was carried out on-site, with the shutter being installed later at the site. [Case Overview] ■ Dimensions: Approximately W11,050 × H3,325 mm ■ After the structure was installed, wall finishing and electrical work were completed by the contractor. ■ A simple and smart closed exterior structure. *For more details, please refer to the related links or feel free to contact us.

• Gates, walls and fences
• Fences and gateposts

A case manufactured with a design that allows the shutter case to be visible from the back!

We would like to introduce a case where we manufactured and delivered a FIT GATE as a passage gate and shutter gate for a private residence in Saitama Prefecture. Processing for the keypad, intercom, and lighting piping was done in the factory before shipping. This time, it was manufactured with a case exposure specification that allows the shutter case to be visible from the back, and shutter installation was carried out later. The design features a beam that slightly protrudes, and different finishing materials were used to create a varied design. [Case Overview] ■ Dimensions: Approximately W6,300 × H2,925 mm ■ Installation Time: Approximately 5 hours *For more details, please refer to the related links or feel free to contact us.

• Gates, walls and fences
• Fences and gateposts

A gate with a sense of unity and cohesion in a design that adds variation! Introducing construction examples.

We would like to introduce a case where a gate that integrates a general access door and a shutter gate was manufactured and delivered as one unit. The embedded post was installed at the specified location within the factory, and after the structure was set up, finishing work such as wall tiling, intercom installation, and cover material installation was carried out by the contractor, resulting in completion. The general access door and shutter gate are connected by a beam, utilizing the recess to create a design that has a sense of unity and cohesiveness. 【Case Overview】 ■ Manufactured and delivered as one unit ■ Embedded post installed at the specified location within the factory ■ Design connects the general access door and shutter gate with a beam *For more details, please refer to the related links or feel free to contact us.

• Gates, walls and fences
• Fences and gateposts

Due to the large body, it is manufactured in parts! Electrical wiring for delivery boxes and lighting is installed within the factory.

We would like to introduce a case where a gate that integrates a standard door and a shutter gate was manufactured and delivered by FIT GATE. Due to the large structure, it was manufactured in segments and delivered using two 4-ton unic trucks. Downlights provided by the client were installed on the protruding part of the shutter gate beam and the standard door. Electrical wiring for delivery boxes and lighting was installed in the factory, and after the structure was set up, finishing work such as tiling was carried out by the construction company, completing the project. 【Case Overview】 ■ Dimensions: Approximately W9,300 (total length) × H2,925 mm (at the highest point) ■ Installation time: Approximately 3 hours *For more details, please refer to the related links or feel free to contact us.

• Gates, walls and fences
• Fences and gateposts

The upper part of the general-purpose door adopts a slab roof! Designed to allow rainwater treatment through a drain.

We would like to introduce a case where a large gate that integrates a general access gate and a shutter gate was manufactured and delivered as a split structure. The general access gate and the shutter gate were manufactured separately and delivered directly to the site by two 4-ton crane trucks. After the delivery, connection work was carried out, and the upper part of the general access gate was designed with a slab roof to allow for rainwater drainage through a drain. After the installation of the structure, finishing work such as tiling was carried out by the contractor, and it was completed. The gate was finished with a luxurious and calm impression. [Case Overview] ■ Dimensions: Approximately W13,940 × H2,925 mm ■ Installation Time: Approximately 6 hours *For more details, please refer to the related links or feel free to contact us.

• Gates, walls and fences
• Fences and gateposts

The ceiling of the general-purpose door was installed with supplied downlights! This is a case where waterproof substrate was applied and delivered.

We would like to introduce a case where a large gate, integrating a general-purpose gate and two shutter gates, was manufactured and delivered in parts. The general-purpose gate features a slab roof. Additionally, embedded posts, delivery boxes, and piping were manufactured and installed in the factory before shipping. After the installation of the structure, finishing work such as wall finishing was carried out by the contractor, resulting in a bright and high-quality gate. 【Case Overview】 ■ Dimensions: Approximately W16,850 × H2,925 mm (shutter gate dimensions) ■ Installation time: Approximately 6 hours ■ Eaves materials were installed by the contractor after the structure was set up. *For more details, please refer to the related links or feel free to contact us.

• Gates, walls and fences
• Fences and gateposts

Introduction of a case where work was carried out in an orderly manner and installation was completed in a short time.

We would like to introduce a case where we manufactured and delivered a shutter gate as an entrance to a parking space. In this instance, the shutter installation was arranged by the contractor, so we were only requested to provide the framework. After the framework was installed, the contractor completed the shutter installation and wall finishing to match the gate posts, resulting in a beautifully unified entrance area enhanced by greenery. 【Case Overview】 ■ Dimensions: Approximately W4,590 × H2,925 mm ■ Installation Time: Approximately 2 hours *For more details, please refer to the related links or feel free to contact us.

• Gates, walls and fences
• Fences and gateposts

Introduction of a case where painting was done only on the part where the neighboring block wall touches within the factory.

Here is an example of a project where we manufactured and delivered a shutter gate for two units. The dimensions are approximately W6,200×H2,925mm, and the installation time was about 2 hours. Painting was done in the factory only on the part that touches the neighboring block wall. After the installation of the structure, finishing work such as tile installation was carried out by the contractor. 【Project Overview】 ■ Dimensions: Approximately W6,200×H2,925mm ■ Installation Time: Approximately 2 hours *For more details, please refer to the related links or feel free to contact us.

• Gates, walls and fences
• Fences and gateposts

Introduction of a case where the roof of the shutter gate was made slightly larger at 150mm.

We would like to introduce a case where a shutter gate for two units was manufactured and delivered as a single unit FIT GATE. The dimensions are approximately W6,300 × H2,925 mm, and the installation time was about 3 hours. Normally, to allow for the carport roof to fit, the shutter gate's roof extends about 100 mm at the back, but this time we made it slightly larger at 150 mm. After the installation of the structure, finishing work such as tiling was carried out by the construction company. 【Case Overview】 ■ Dimensions: Approximately W6,300 × H2,925 mm ■ Installation Time: Approximately 3 hours *For more details, please refer to the related links or feel free to contact us.

• Gates, walls and fences
• Fences and gateposts

Approximately W6,350×H2,925mm, installation time is about 3 hours! Exposed type shutter case structure.

We would like to introduce a case where a shutter gate was manufactured and delivered as a single unit to a private residence in Aichi Prefecture. This time, it was a shutter case exposed type structure, and the shutter installation was arranged by the construction company. After the structure was installed, finishing work was carried out by the construction company, and it was completed. The use of the same tiles as the side walls of the access gate created a sense of unity, and since it was installed at almost the same height as the adjacent garage, it resulted in a cohesive closed exterior. 【Case Overview】 ■ Dimensions: Approximately W6,300 × H2,925 mm ■ Installation Time: Approximately 3 hours *For more details, please refer to the related links or feel free to contact us.

• Gates, walls and fences
• Fences and gateposts

Introduction of a construction case where columns and beams were manufactured separately and connected on-site.

We would like to introduce a case where a shutter gate, with a part of the beam extended to serve as a roof for the approach, was manufactured and delivered by FIT GATE. Since the effective opening height of the shutter is H2500mm, the columns and beams were manufactured in sections and connected on-site. The extended beam, serving as the roof, was designed to include optional rain gutters for rainwater management. After the installation of the structure, the contractor applied the finishing touches, combining it with a stylish functional gate post, resulting in a functional and fashionable gate. 【Case Overview】 ■ Dimensions: Approximately W8,685 × H3,225mm (total length) ■ Installation Time: Approximately 4 hours *For more details, please refer to the related links or feel free to contact us.

• Gates, walls and fences
• Fences and gateposts

Introduction of a case where a shutter gate was installed that allows a camper van to enter and exit a private residence.

We would like to introduce a case where a shutter gate that allows a camper van to enter and exit was manufactured and delivered by FIT GATE for a private residence in a certain location in Tokyo. Due to the large effective opening height of the shutter, the columns and beams were manufactured in segments, and assembly work was carried out on-site. The shutter was installed on a different day after the main structure was set up. After the main structure was installed, finishing work was carried out by the contractor, and tiles matching the boundary wall connected to the gate were applied, resulting in a chic gate with a cohesive look. 【Case Overview】 ■ Dimensions: Approximately W4,550 × H3,225 mm (Effective opening height H2,600 mm) ■ Installation time: Approximately 4 hours *For more details, please refer to the related links or feel free to contact us.

• Gates, walls and fences
• Fences and gateposts

Introduction of a case where FIT GATE was installed to effectively utilize space that would otherwise be dead space.

We manufactured and delivered a FIT GATE as a shutter gate for a private residence in Aichi Prefecture. On the electric pole side, we widened the column width and installed a connection box between the site and the structure, effectively utilizing the dead space. After the structure was installed, finishing work such as wall painting was carried out by the construction company, and the shutter gate was completed. [Case Overview] ■ Dimensions: Approximately W6,380 × H2,925 mm ■ Installation Time: Approximately 2 hours *For more details, please refer to the related links or feel free to contact us.

• Gates, walls and fences
• Fences and gateposts

Introduction of a case where columns and beams were manufactured separately for a large gate and assembled on-site.

We would like to introduce a case where a shutter gate for two vehicles was manufactured and delivered by FIT GATE. Due to the large size of the gate, the columns and beams were manufactured in separate parts, and assembly work was carried out on-site. After the structure was installed, the contractor applied wall finishes and other work, completing the gate. Since privacy screens will be installed on both sides of the gate, we adjusted the design to accommodate the overhang of the steel frame base. 【Case Overview】 ■ Dimensions: Approximately W7,050 × H2,925 × D1,230 mm ■ Installation Time: Approximately 3.5 hours *For more details, please refer to the related links or feel free to contact us.

• Gates, walls and fences
• Fences and gateposts

The protruding roof in front has been fitted with downlights supplied during manufacturing.

We would like to introduce a case where a shutter gate designed with variations in the eaves and column heights was manufactured and delivered by FIT GATE. Due to its height and depth, it was manufactured in sections and connected on-site. The downlights provided were installed during manufacturing on the protruding roof. After the installation of the structure, finishing work was carried out by the contractor, completing the area around the gate. 【Case Overview】 ■ Dimensions: Approximately W6,480 × H3,125 mm (Effective opening W5,760 × H2,300) ■ Installation time: Approximately 3.5 hours *For more details, please refer to the related links or feel free to contact us.

• Gates, walls and fences
• Fences and gateposts

We will introduce a case where each building was manufactured as a single unit and connection work was carried out on-site.

We would like to introduce a case where a shutter gate with varying depth was manufactured and delivered by FIT GATE. Each unit was manufactured as a single unit and connected on-site. The front and back faces of each structure were aligned, creating a difference in depth. After the installation of the structure, finishing work was carried out by the contractor. Although it is a simple gate, the variation in depth creates a spacious entrance and parking area. 【Case Overview】 ■ Dimensions: Approximately W8,700 × H2,925 mm ■ Installation Time: Approximately 4.5 hours *For more details, please refer to the related links or feel free to contact us.

• Gates, walls and fences
• Fences and gateposts

The pipe shutter is installed and shipped within the factory. Installation work will be carried out after arrival at the site.

Here is an example of a shutter gate manufactured and delivered as a single unit. The pipe shutter was installed in the factory and then shipped. It was brought in using a 4-ton crane truck, and installation work was carried out after arriving at the site. After the frame was installed, the finishing work was done by the contractor, and a gray paint was applied to match the residence, resulting in a cool-looking gate. 【Case Overview】 ■ Dimensions: Approximately W6,090 × H2,925 mm ■ Installation Time: Approximately 4.5 hours *For more details, please refer to the related links or feel free to contact us.

• Gates, walls and fences
• Fences and gateposts

Introduction of a case where the body setup was divided into two days, with approximately 3 to 4 hours of setup each day.

This is an example of a shutter gate installed in a condominium, manufactured and delivered by FIT GATE. The installation of the framework was completed over two days, taking about 3 to 4 hours each day. After the framework installation, finishing work was carried out by the contractor, resulting in both buildings having a simple gate with a soft impression. [Case Overview] ■ Right Side [Shutter Gate + Passage Gate] - Approximately W7,370 × H3,075mm (at the highest point) - Effective opening of the shutter: Approximately W5,500 × H2,300mm ■ Left Side [Shutter Gate] - Approximately W5,790 × H3,075mm - Effective opening of the shutter: W5,200 × H2,300mm *For more details, please refer to the related links or feel free to contact us.

• Gates, walls and fences
• Fences and gateposts

For the large gate, the columns, beams, and side walls are manufactured separately and assembled on-site.

Here is an example of a shutter gate with extended side walls. Due to the large size of the gate, the columns, beams, and side walls were manufactured in segments and connected on-site. The built-in type structure conceals the shutter case from the back. The wall, which is the same height as the shutter gate, is constructed with a steel frame, eliminating the need for a retaining wall and allowing for the installation of a privacy wall without obstructing parking. [Case Overview] ■ Dimensions: Approximately W7,450 × H2,925mm (Effective opening of the shutter: W5,960 × H2,300mm) ■ Installation time: Approximately 5 hours *For more details, please refer to the related links or feel free to contact us.

• Gates, walls and fences
• Fences and gateposts

Introduction of a case where delivery was made directly to the site with one unit and installation was completed in a short time of about 2 hours.

We manufactured and delivered a FIT GATE to a private residence in a certain location in Tokyo. We installed the shutter in our factory and delivered a semi-finished structure with the base prepared as a single unit directly to the site, completing the installation in about 2 hours. After the structure was installed, the contractor carried out the finishing work, and the gate was completed. 【Case Overview】 ■ Dimensions: Approximately W5,850 × H2,925 mm (Effective opening of the shutter W5,260 × H2,300 mm) ■ Installation time: Approximately 2 hours *For more details, please refer to the related links or feel free to contact us.

• Gates, walls and fences
• Fences and gateposts

Approximately W9,400×H3,700mm (including the roof) with an installation time of about 6 hours! Introduction of FIT GATE construction examples.

We would like to introduce a case where FIT GATE was manufactured and installed as the entrance gate for a newly constructed condominium. The gate was manufactured in sections and connected on-site. The finishing of the roof was done by installing supplied materials in the factory before delivery. The contractor completed the finishing work, including tile installation and electrical work, and it was completed. 【Case Overview】 ■ Dimensions: Approximately W9,400 × H3,700mm (including roof) ■ Installation time: Approximately 6 hours *For more details, please refer to the related links or feel free to contact us.

• Gates, walls and fences
• Fences and gateposts

Introduction of a case where the upper part of a column extended from the roof was divided and connected on-site.

We have manufactured and delivered the FIT GATE as the entrance gate for the condominium. This time, the upper part of the column extended from the roof was divided, and connection work was carried out on-site. The lower unit structure was transported using a 12-ton crane truck. The roof decoration, ceiling materials, and downlights were installed in the factory as supplied items. After the structure was installed, finishing work was carried out by the contractor, and the gate was completed. [Case Overview] ■ Dimensions: Approximately W9,400 × H3,715 mm (total length × highest point) ■ Installation time: Approximately 3 hours *For more details, please refer to the related links or feel free to contact us.

• Gates, walls and fences
• Fences and gateposts

Approximately W6,280 × H2,600mm, installation time is about 3 hours! Introduction of a case where the FIT GATE was installed.

We would like to introduce a case where a FIT GATE was installed at the entrance gate of a private residence. Dimensions are approximately W6,280×H2,600mm, and the installation time was about 3 hours. Additionally, we welcome any inquiries related to seismic-resistant exteriors, seismic reinforcement, traditional Japanese gates "Sukiya-mon," as well as installation work, delivery times, and individual consultations. Please feel free to reach out to us regarding any exterior-related questions. 【Case Overview】 ■Dimensions: Approximately W6,280×H2,600mm ■Installation Time: Approximately 3 hours *For more details, please refer to the related links or feel free to contact us.

• Gates, walls and fences
• Fences and gateposts

Introduction of a construction example where natural wood sliding doors create a natural impression around the gate.

We have delivered and installed the FIT entrance gate at a private residence in Gifu Prefecture. The side walls feature a curved decoration expressed through grooves, and the natural wood sliding door creates a natural impression around the gate. There is a storage space at the back, which can also be used as a small shed for storing items. This door is also made of natural wood. 【Case Overview】 ■ Curved decoration expressed through grooves on the side walls ■ Natural wood sliding door creates a natural impression around the gate ■ Storage space at the back can be used as a small shed for storing items *For more details, please refer to the related links or feel free to contact us.

• Gates, walls and fences
• Fences and gateposts

Introduction of a case where the wooden frame type 1 and shutter gate were installed together in approximately 4 hours.

We would like to introduce a case where a Sukiya gate, Type Yorigata 1, and a shutter gate were manufactured and delivered separately. Both structures were produced as one unit and delivered directly to the site on the same day. After installation, finishing work was carried out by the contractor. Since the site is visible through the lattice of the pipe shutter and sliding door, it was finished in a way that emphasizes a Japanese aesthetic without feeling oppressive. 【Case Overview】 ■ Sukiya Gate, Yorigata Type 1 (Standard Product): Approximately W2,435×H2,470×D1,335mm (Roof Dimensions) ■ Shutter Gate (Built-in Type): Approximately W3,790×H2,925mm ■ Installation Time: Approximately 4 hours for both structures combined *For more details, please refer to the related links or feel free to contact us.

• Gates, walls and fences
• Fences and gateposts

Introduction of a case where only the column part extended from the right side of the roof was manufactured in sections and connected on-site.

We manufactured and delivered the entrance gate for the rental housing. The dimensions are approximately W8,720×H2,825mm (roof size), and the installation time was about 4 hours. Only the column part extended from the roof on the right side was manufactured in sections, and the connection work was done on-site. After the structure was installed, finishing work was carried out by the contractor, and the gate was completed. The presence of the entrance gate gives a stylish and luxurious impression. 【Case Overview】 ■ Dimensions: Approximately W8,720×H2,825mm (roof size) ■ Installation time: Approximately 4 hours *For more details, please refer to the related links or feel free to contact us.

• Gates, walls and fences
• Fences and gateposts

The same natural stone-like material used around the door has been applied, resulting in a luxurious gate finish!

We manufactured and delivered the FIT GATE as a garage gate installed under the eaves of a residential property in Tokyo. Due to space limitations, it was designed as a case-exposed type where the shutter case is visible from the back. After the installation of the structure, the finishing work was carried out by the contractor. The same natural stone-like material used around the gate was applied, resulting in a luxurious-looking gate. [Case Overview] - Designed as a case-exposed type where the shutter case is visible from the back - Finished to create a luxurious-looking gate *For more details, please refer to the related links or feel free to contact us.

• Gates, walls and fences
• Fences and gateposts

Approximately W6,460 × H2,925mm, installation time is about 5 hours! Introducing examples of shutter gate construction.

We manufactured and delivered a FIT GATE as a shutter gate for a private residence in Tokyo. The columns and beams were manufactured separately, and connection work was carried out on-site. The dimensions are approximately W6,460×H2,925mm, and the installation time was about 5 hours. After the structure was installed, the contractor completed the shutter work and wall finishing, resulting in completion. [Case Overview] ■ Columns and beams were manufactured separately, with connection work conducted on-site. ■ Dimensions are approximately W6,460×H2,925mm, and installation time was about 5 hours. *For more details, please refer to the related links or feel free to contact us.

• Gates, walls and fences
• Fences and gateposts

An article has been published about the case of introducing the expense reimbursement system "Rakuraku Seisan" at TSP Corporation. ~ In the case of TSP ~ Before the introduction, there were challenges such as dealing with the "paper" sent from various locations and the reliance on specific individuals for the tasks. After the introduction, the input and checking of FB data, which used to take 2 to 3 hours, can now be completed in just 5 minutes. Additionally, the mindset of the accounting department, which was previously reliant on manual entry, has changed. [Case Overview] ■ Challenges before introduction - Dealing with "paper" sent from various locations, reliance on specific individuals ■ Key points of introduction - A robust support system for setup and operation - Easy to start from a small scale both financially and functionally *For more details, please refer to the related links or feel free to contact us.

The facility operating the nurse call system has made the bed exit sensor wireless, allowing it to notify in conjunction with the nurse call. By simply connecting the mat sensor "Foldable Thin Matt-kun," the body movement call "Ugo-kun," and the wheelchair body movement call "Ayumi-chan" to the transmitter HB-RS, you can make the bed exit sensor wireless. The infrared sensor "Just Place Pole-kun" has the transmitter HB-RS built-in. 【Features】 ○ Wireless conversion by simply connecting existing sensors to the transmitter HB-WSK. ○ The bed exit sensor notifies wirelessly in conjunction with the nurse call. ○ Up to 5 transmitters can be registered with one receiver. ○ The communication distance between the transmitter and receiver is approximately 10 meters. ◎ For more details, please contact us or download the catalog.

Full and empty management refers to the real-time display of parking availability and the management of efficient use of parking spaces. By utilizing Hotron's sensors, drivers can quickly discover available parking spaces, achieving efficient parking lot operations. ■ For large parking lots, the "floor management method" and "block management method," which focus on cost reduction, are recommended. Sensors are installed at regular intervals to count the number of vehicles passing through. This method offers the advantage of easy installation and low costs. 【Target Products】 - Vehicle Count Sensor CCS2 - Ultrasonic Sensor HM-UX2/UW2 ■ For smaller scale operations, the "space management method," which installs sensors in each parking space to display availability with high accuracy, is recommended. By ensuring accurate full and empty displays, it helps prevent unnecessary entry of new vehicles and enables safe parking lot operations. 【Target Products】 - Occupancy Detection Sensor HM-UX2/UW2 - Occupancy/Pass Detection Sensor HM-LC6 - Occupancy Detection Sensor HM-LC7/LC7-FLS - Occupancy/Pass Detection Sensor HM-S6 - Occupancy Detection Sensor HM-S8

The non-contact beam touch sensor "HA-T401/HA-T520" has a compact detection range, making it an ideal automatic door sensor for installation on automatic doors facing narrow corridors or busy streets. Depending on the application and installation location, you can choose between "non-vision mounting type" and "non-vision built-in type." 【Features】 ● With the beam touch sensor, you can open and close the automatic door simply by bringing your hand close without touching it, ensuring hygiene. ● Depending on the installation environment, such as single sliding or bi-parting doors, the detection range can be set in four configurations: left, center, right, and a total of 12 spots. ● Two types of activation row settings are available to reduce unnecessary opening and closing of the automatic door due to cross traffic, contributing to energy-saving effects. ● The touch switch and infrared sensor are integrated, allowing for a switch between beam touch and infrared sensor with a single model. 【Recommended for such locations!】 ☑ Entrance facing a busy corridor ☑ Counter or sign near the door ☑ Buildings facing narrow corridors ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors ◎ For more details, please download the materials or contact us.

Japan is one of the top 10 countries in the world with frequent earthquakes. The 2020 White Paper on Land, Infrastructure, Transport and Tourism has also reported an increase in the probability of major earthquakes occurring. Regarding the Nankai Trough earthquake, the probability of an earthquake with a magnitude of 8 to 9 occurring within the next 30 years is estimated to be 70 to 80%. At Hotron, we recommend the introduction of seismic devices for earthquake countermeasures in buildings and equipment. The seismic device 'HK-2' is a product that automatically performs various controls that have been pre-set when it detects strong shaking equivalent to a seismic intensity of 5 lower or higher. For example, it can automatically execute actions such as: "Open automatic doors and gates to secure evacuation routes and access for emergency vehicles" "Transmit signals to the control room and stop facility equipment" "Unlock the keys to locked lockers" "Automatically play voice guidance" For more details, please download the materials or contact us.