【Product News】PERI climbing systems 'SCS', 'RCS', 'ACS', and 'CB' are used at construction sites around the world.

A stable and flexible scaffold bracket system for one-sided and two-sided climbing formwork operations.

The "PERI SCS Climbing System" Single-Sided is a climbing-type bracket system primarily used for one-sided construction, meaning it is used in situations where separators are not employed. Common applications include dams, sluice gates, cooling towers, bunkers, main towers, tunnels, and liquid-tight embankments. The brackets are also suitable for forming fixed wall formwork. Additionally, by adding minimal components, it can also accommodate two-sided construction. In the SCS Climbing System, two bracket units and one wall formwork section are integrated to form a crane-movable platform (climbing unit). The components that make up the climbing unit are designed according to a modular concept. By maximizing the use of common components, multiple climbing units can be constructed. *For more details, please refer to the PDF materials or feel free to contact us.*

• Formwork material

Construction kit system for various projects requiring self-elevating technology.

The "PERI RCS Rail Climbing System" is a climbing system that serves as a formwork-integrated scaffold and self-climbing protection panel. There are two methods of climbing: one using a crane and the other using a movable hydraulic device instead of a crane, allowing for selection based on the construction requirements. Additionally, the climbing formwork-integrated scaffold comes standard with a carriage equipped with push-pull support. 【Product Features】 ■ Safe rail-guided procedure - The moving unit is always connected to the building by climbing shoes. ■ Flexible installation - Climbing shoes can be attached to walls and slab edges. ■ Variable assembly - The arrangement of 125mm holes in the climbing rail allows the platform to be adjusted to the height of each floor. *For more details, please refer to the PDF materials or feel free to contact us.

• Formwork material

Construction kit system for various works requiring self-elevating technology.

The "PERI ACS Automatic Climbing System" is an integrated climbing system that serves as a self-climbing working scaffold and a large formwork panel system. 【Product Features】 ■ It is possible to climb with an integrated system of working scaffold and large formwork. ■ It uses hydraulic cylinders (rising 4 to 6 meters in about 20 minutes per batch). ■ Climbing is possible on both the outer side and the hollow of bridge piers. ■ Formwork can be safely and easily constructed and stripped on the main stage. ■ By placing the formwork on a carriage that can move back and forth on the stage, construction and stripping work for each concrete pouring batch can be performed safely and efficiently. *For more details, please refer to the PDF document or feel free to contact us.

• Systems Architecture

Integration of climbing work scaffolding and the large wall formwork system VARIO for construction!

The "CB Climbing Bracket System" is a climbing system that integrates a working scaffold with the large wall formwork system VARIO. 【Product Features】 ■ It integrates the working scaffold and large wall formwork, allowing for climbing with a crane. ■ It is ideal for construction of high continuous sections, such as LNG storage tanks. ■ It reduces the labor of assembling and dismantling scaffolding, leading to labor savings and shortened construction periods. ■ By placing the formwork on a carriage that can move back and forth on the stage, it enables safe and efficient construction and stripping operations for each concrete pouring batch. *For more details, please refer to the PDF document or feel free to contact us.

• Systems Architecture

Exhibition of system formwork born in Germany! What is system formwork? I want to see the actual system formwork! Please feel free to contact us for more information!

At Perry Japan, we have a stockyard and product exhibition area. Ibaraki Stockyard 〒311-3155 Ibaraki Prefecture, Higashi Ibaraki District, Ibaraki Town, Shimohashi 2000-12 TEL: 029-219-0800 FAX: 029-219-0801 At Perry Japan, we conduct tours of the system formwork product exhibition hall, study sessions on system formwork, assembly experiences, and product seminars at the Ibaraki Stockyard, based on the concept of "Listen, See, Touch/Ride, Assemble" to meet our customers' needs. * What kind of company is Perry? * What is system formwork? * How is system formwork used? * I know about system formwork, but I've never used it. * I want to see the actual product before purchasing or renting! * And more. Please come and see our products at the Ibaraki Stockyard. For inquiries about tours, study sessions, or product seminars, feel free to contact us.

• Systems Architecture

The "HM-S6" is an embedded park sensor that detects vehicles through changes in magnetic flux and responds to various situations from passing to stationary vehicles. It can be used for the opening and closing of input doors at waste treatment plants, as well as for gates that vehicles pass through and outdoor parking applications. It can also be installed on rebar and steel plates. 【Features】 ■ Resistant to the effects of natural environments such as rain, snow, temperature changes, and geomagnetism ■ Protection rating IP68 reduces the risk of water ingress ■ Ten times the load capacity compared to conventional embedded park sensors (based on our comparison) ■ Can distinguish between vehicles even when they pass continuously ■ Can be installed on rebar and steel plates *For more details, please refer to the PDF document or feel free to contact us.

Thank you very much for visiting our company website and catalog, and for your interest in our diesel engine generators. From customer surveys, the most common feedback we received was: - I want to see the actual generators that have been installed. - I want to see them operating under real load. - I want to hear the opinions of companies that have installed them. - I want to see the generators in operation before making a purchase. After all, it’s understandable to feel worried about purchasing a generator without seeing the actual unit first, right? As the saying goes, "Seeing is believing," so we will be holding this tour. It will take place in that area of the Kanto region, where summer temperatures exceed 40°C. We successfully operated our generators this summer as well, so we are confident in handling the heat (sweat). Additionally, it has been confirmed that our generators equipped with the world-leading "Scania engine" are "fuel-efficient." This will surely help reduce daily operating costs. Please note that while we will provide kind and courteous assistance, the meeting and dispersal will be at the site (transportation costs and other expenses will be borne by the customer), so please understand this in advance. Contact: Kaneko

The "CCS2" is a ceiling-mounted vehicle counting sensor that employs an infrared reflection method. It can detect vehicles in both directions with a single unit, accurately counting vehicles even during traffic jams or when vehicles pass each other. Additionally, this product can be used not only for vehicle counting but also as a sensor for departure warnings. Furthermore, by using a separately sold dedicated remote control, it is easy to reset the sensor alone, switch the counting direction, and change the patterns of the departure warning timer. 【Features】 ■ Angle adjustment up to ±5° ■ Can be installed in locations with high ceilings up to 4m ■ Detection area consists of 40 spots, allowing for extensive detection ■ The display LEDs are color-coded by direction, making operation confirmation easy.

We will introduce the implementation results of the sensor technology developed by the Hotron Group, which has been cultivated over more than half a century, through customer case studies. In addition to automatic door sensors, we also offer a wide range of vehicle detection sensors and nursing/care sensors. We have many implementation examples available, so please take a look at the case study page.

Thank you very much for using our services. We have added a new service site. https://fusions.jp/fus-lp This is an introduction to the following services that will assist in sales and recruitment activities. * Sales... "Automatic sending of business negotiations to salespeople" * HR... "Elimination of miscellaneous tasks for the recruitment team" ⭕️ We are currently offering a free case study collection that you can implement in your own company with a 2-minute survey!