Analysis of organic-inorganic composite materials using FT-IR and EDX.

Here is an example of analyzing organic-inorganic composite materials using FT-IR and SEM-EDX!

We will introduce the analysis of organic and inorganic composite materials using FT-IR and EDX. FT-IR measurements were conducted on the glossy and non-glossy areas of the surface of the PET bottle label, revealing that the IR spectra differed between the glossy and non-glossy areas. Additionally, SEM-EDX measurements were performed on the glossy and non-glossy areas, and the EDX spectrum and backscattered electron image showed that the non-glossy area contained sulfur (S) and barium (Ba), which were not detected in the glossy area. [Analysis Details] ■ Organic analysis using FT-IR - FT-IR measurements on the glossy and non-glossy areas of the PET bottle label surface ■ Inorganic analysis using SEM-EDX - SEM-EDX measurements on the glossy and non-glossy areas *For more details, please refer to the PDF document or feel free to contact us.

• Analysis and prediction system

This year, we are introducing new additions! We will introduce the features of the three basic measurement methods.

In "Microscopic FT-IR," there are three main measurement methods: "transmission method," "reflection method," and "ATR method." In "Microscopic FT-IR," which combines FT-IR with an optical microscope, it is possible to measure small substances of about tens of micrometers that are difficult to measure with conventional FT-IR, using an aperture (field stop). While the transmission method is the basic measurement method in microscopic FT-IR, the reflection method or ATR method may be more suitable depending on the shape of the sample and the feasibility of sampling. 【Characteristics of Measurement Methods】 ■ Transmission Method - Infrared light is irradiated onto the sample, and the transmitted light is measured. - Information is obtained from the thickness of the material that the infrared light has passed through. ■ Reflection Method - Infrared light is irradiated onto the sample, and the reflected light is measured. - Information about the surface of the sample is obtained. *For more details, please download the PDF or feel free to contact us.

• Other measuring instruments

Sample 1, including comparison with Ref! Summarize and conduct the candidate analytical methods.

We would like to introduce our "Chemical Analysis On-Demand Service." When conducting component analysis of foreign substances or stains on products, it is important to determine whether organic analysis or inorganic analysis is more suitable, and which specific analysis method is best among organic and inorganic options. We provide a comprehensive service for customers who are struggling with the selection of analysis methods. Since each analysis device can measure different targets, it is necessary to choose a method that fits the purpose based on the information available. 【Features】 ■ Only data for which results have been obtained will be reported ■ Results will be reported for up to 2 methods ■ If you wish to receive results for more than 3 methods, additional costs will be incurred *For more details, please refer to the PDF document or feel free to contact us.

• Analysis and prediction system

Essential materials alongside metals and inorganic materials! Introducing examples of analysis and evaluation services for organic materials.

Organic materials such as solvents, additives, pharmaceuticals, and plastics are essential materials alongside metals and inorganic materials. They have a wide variety of types due to the combination of light elements, and their specificity is manifested through structure, intermolecular forces, and electron behavior. However, it seems that chemical instrumentation analysis and evaluation are necessary for a fundamental understanding of their properties. This document presents case studies of analysis and evaluation services for organic materials. [Contents] ■ FT-IR Analysis ■ GC-MS Analysis ■ Molecular Weight Distribution Evaluation by GPC (SEC) *For more details, please refer to the PDF document or feel free to contact us.

• Other analytical equipment
• Measurement and Analysis Equipment

Clarifying the functions, characteristics, and conditions of products and materials. We propose analytical methods tailored to the analysis target and purpose.

Our "Chemical Analysis Services" analyze various industrial products and materials, such as panel products, semiconductor products, and resin molded products, at the molecular and atomic levels. We clarify their functions, characteristics, and conditions to contribute to solving our customers' challenges. We can propose analytical methods that are suitable for the material being analyzed and the purpose of the analysis. Please feel free to consult us. 【Examples of Analysis Content】 ◎ Foreign substances in products ◎ Condition of materials used ◎ Material degradation ◎ Trace components and elements contained in materials ◎ Physical properties of products and materials due to heat

• others

Observation of samples and elemental analysis are possible! It can be utilized not only in the semiconductor and electronic components fields but also in life sciences and biological fields.

We handle the tabletop SEM (scanning electron microscope) 'TM3030Plus' manufactured by Hitachi High-Tech. It has been half a century since SEM observation became commonplace. SEM observation has become an important observation method in various fields. With the "charge reduction mode" of the tabletop SEM, it is possible to observe and analyze samples that cannot be observed with FE-SEM. It can be utilized not only in the semiconductor and electronic components fields but also in life sciences and biological fields. 【Features】 ■ For conductive samples such as semiconductors and electronic components, SEM observation is recommended mainly in normal/conductive mode. ■ For non-conductive samples such as plastics, paper, rubber, ceramics, and biological samples containing moisture or oil, SEM observation in surface/normal/charge prevention mode is recommended. *For more details, please refer to the PDF document or feel free to contact us.

• others

We conduct surface analysis, foreign substance analysis, and organic composition analysis.

At AITES, we propose and conduct contract analysis menus suitable for the purpose and sample, including the analysis of organic and inorganic substances, foreign matter, and surface analysis. In this department, we perform component analysis of micro foreign substances using advanced sampling techniques, as well as impurity analysis in samples, conducting both qualitative and quantitative analysis of organic and inorganic components. Additionally, we analyze the surface of samples for contamination and oxidation states. 【Service List】 ■ Component analysis of epoxy resin hardeners using Pyrolysis GC/MS ■ Analysis of micro organic foreign substances using Imaging FT-IR ■ Analysis of micro foreign substances using Micro Raman Spectroscopy ■ Ion Chromatography (IC) analysis, etc. *For more details, please refer to the PDF document or feel free to contact us.

• Other analytical equipment

In recent times, there has been a growing interest in infection control measures and facility hygiene management. Our company offers non-contact sensor products that are recommended for commercial facilities, food factories, and nursing and caregiving facilities. 【Sensors for Automatic Doors】 ● Light Touch Sensor HA-T401 … When you wave your hand in front of the automatic door, the sensor detects the movement and opens or closes the door. This is recommended for making doors with touch switches non-contact. ● Hand Wave Sensor PF-R5, PF-U2, DHS-1 … Opens and closes the automatic door by waving your hand in front of the sensor. ● Foot Switch PF-01S/01D/03S/05 … Opens and closes the automatic door by placing your foot in the opening. 【Access Control System】 ● Face Recognition + Unmanned Temperature Measurement DS Series … Allows for face recognition along with mask detection and body temperature measurement simultaneously. ● Automatic Disinfectant Spray Dispenser PHW-03B … Automatically sprays disinfectant when you wave your hand in front of the sensor. 【Nursing and Care Sensors】 ● Infrared Bed Exit Sensor "Just Place It Pole-kun" … This bed exit sensor is installed next to the bed and notifies via nurse call when the subject enters the detection range. ◎ For more details, please download the catalog or contact us.

[To the owners of parking lots and parking lot construction companies] "I'm worried about not colliding with pedestrians when exiting the parking lot..." Among vehicle entrances to parking lots, stores, residences, and factories, particularly at entrances facing sidewalks or roadways, there is a risk of dangerous incidents such as collisions with pedestrians or between vehicles. To alleviate such concerns, Hotron proposes a [Vehicle Exit Warning Sensor] that detects vehicle departures using various sensors and alerts the surrounding area with LED lights and buzzers. The system consists of a simple configuration of "sensor" + "controller" + "switching power supply (24V)" + "LED rotating light." *Please note that a separate control panel is required to include the controller and switching power supply (24V) when using the exit warning system. *We kindly ask customers to arrange for the switching power supply (24V), LED rotating light, control panel, circuit breakers, etc. Since it can be retrofitted, it can also be used for existing parking lot entrances. We hope this will contribute to safer vehicle passage for everyone. ◎ For more details, please contact us or download the catalog.

The comprehensive catalog "General Catalog J-02" for the 2023 fiscal year has been completed. This comprehensive catalog features many Joe Prince products primarily used in industrial equipment and facilities. Please make use of it.

Do you have any concerns or requests regarding wired bed exit sensors? × Tangling or tripping over wired cables × Cable disconnection or damage × Worrying about forgetting to turn the switch back on after temporarily stopping the sensor. × Wanting to be notified of bed exits even from a location far from the nurse call outlet. Such concerns can be resolved simply by connecting our wireless nurse call linked set to the sensor! Our wireless nurse call linked set allows you to connect bed exit sensors like "Ugo-kun," "Foldable Thin Matta-kun," "Ayumi-chan," and "Just Place Pole-kun" to transmitters and receivers, reducing wiring around the bed area, alleviating concerns about tripping or falling due to cables, and contributing to a tidier work environment. Furthermore, it enables the use of bed exit sensors even from locations far from the nurse call outlet, allowing for more flexible equipment placement.

Japan is one of the top 10 countries in the world with frequent earthquakes. The 2020 White Paper on Land, Infrastructure, Transport and Tourism has also reported an increase in the probability of major earthquakes occurring. Regarding the Nankai Trough earthquake, the probability of an earthquake with a magnitude of 8 to 9 occurring within the next 30 years is estimated to be 70 to 80%. At Hotron, we recommend the introduction of seismic devices for earthquake countermeasures in buildings and equipment. The seismic device 'HK-2' is a product that automatically performs various controls that have been pre-set when it detects strong shaking equivalent to a seismic intensity of 5 lower or higher. For example, it can automatically execute actions such as: "Open automatic doors and gates to secure evacuation routes and access for emergency vehicles" "Transmit signals to the control room and stop facility equipment" "Unlock the keys to locked lockers" "Automatically play voice guidance" For more details, please download the materials or contact us.