We will hold a delivery exhibition. Please feel free to reach out!

It is an optical thin-film filter that reduces the reflectance at specific wavelengths and improves transmittance. By increasing the amount of light, it contributes to energy saving and power reduction.

Light reflects at the boundary with air, causing 4% reflection on one side and 8% reflection on both sides of the glass, resulting in a reflection of one's own image. An anti-reflective coating (AR = Anti Reflection Coating) is an optical thin film created by alternately depositing dielectrics with different refractive indices, which causes interference. This principle of interference is utilized to reduce the reflectance of specific wavelengths and improve transmittance. Are you facing any of these issues? - Want to reduce reflections and ghosting in window materials? - Looking for ways to improve visibility and achieve clear image quality? - Want to reduce internal reflections and prevent flare? - Looking to increase light levels to contribute to energy savings? - Is it possible to design an anti-reflective coating (AR) that considers the angle of incidence?

• Security cameras and surveillance systems
• LED light source/module
• Store display shelves

We propose silicone adhesives, potting materials, and encapsulants that can also be used for conventional general-purpose devices requiring heat dissipation.

Adachi New Industry, as a distributor for Momentive, offers various silicone solutions for thermal management. 【1】Thermal Gap Filler Exhibiting thermal conductivity, it contributes to the long-term reliability of devices that generate heat. It is liquid and can be automatically applied using a dispenser. This silicone is ideal for customers facing issues with stress relief and thermal control. 【2】Thermal Silicone Adhesive With excellent thermal conductivity and physical and chemical stability, it allows for thin film application, effectively reducing thermal resistance. It is optimal as a thermal interface adjacent to heating elements, heat spreaders, and heat sinks. 【3】Thermal Potting Compound Silicone sealants demonstrate thermal conductivity and contribute to the long-term reliability of devices that generate heat. We offer materials that cure into soft rubber or gel-like forms, with variations available from low to medium viscosity suitable for potting applications. 【4】Thermal Silicone Grease Exhibiting thermal conductivity, it contributes to the long-term reliability of devices that generate heat. Its ability to be applied as a thin film significantly reduces thermal resistance.

• glue

This is a thin film coating agent designed to protect electronic and printed circuit boards (PCBs). It protects substrates and components from mechanical and environmental corrosion.

Adachi New Industry proposes various silicone products for electrical and electronic components as an authorized dealer of Momentive. ◆◆What is a conformal coating? It is a thin film coating agent designed to protect electronic and printed circuit boards (PCBs). It protects the boards and components from mechanical and environmental corrosion, such as moisture, humidity, and corrosive substances. The application methods include dip, spray, and flow coating, with a typical thickness of around 10 to 200 micrometers. ◆◆Features 1) The most notable feature is that it is a "solvent-free product." 2) It cures quickly at room temperature. 3) It is a reduced product of low molecular siloxane. 4) It has excellent cold and heat resistance. 5) It is a product that can be stored at room temperature. 6) It shows good adhesion to various materials. 7) It has no corrosiveness to metals. 8) The application state can be easily checked with a black light.

• glue

Craftsman's Point: Achieving optical properties with a periodically varying refractive index. Applications: Expected applications in notable fields such as Raman spectroscopy.

We will achieve optical characteristics that have not been realized until now by periodically changing the refractive index. Conventional optical filters (optical thin films) consist of alternating layers of high refractive index films and low refractive index films, which exhibit specific optical properties. In contrast, notch filters (band-stop filters) are deposition products designed to periodically change the refractive index in the thickness direction. They are characterized by the absence of optical ripples outside the stopband. We can realize optical characteristics that have not been achievable with conventional optical thin film processing. (Do you have such challenges?) ■ Is it possible to reflect only around the wavelength of 532nm? ■ I would like the unnecessary parts to be unable to transmit optically. ■ Notch filter? Band-stop filter? Rugate filter? ■ I have heard that the measurement difficulty after deposition is high; can you accommodate this?

• Security cameras and surveillance systems
• Halogen bulbs
• Automated guided vehicles (AGV, RGV)

It is an optical filter that selectively transmits ultraviolet wavelengths (255 nm) while blocking light of other wavelengths (using a substrate from Hisashi Seiko Glass).

Applications in the ultraviolet region are on the rise. At Isuzu Seiko Glass Co., we have developed filter glass substrates (IHU series) that have a transmission limit wavelength in the ultraviolet range and improved weather resistance to ultraviolet light. Recently, we have successfully deposited dielectric multilayer films to create bandpass filters in the ultraviolet range, as shown in the chart (measured data). (Are you facing these challenges?) ■ I want to selectively transmit specific wavelengths using aspherical lenses or lens arrays. ■ Is it possible to achieve pinpoint transmission at the UV-C wavelength of 254 nm? ■ Is it possible to achieve anti-reflection with limited substrates and deposition materials? ■ I've heard that measurement difficulty after deposition is high; can you handle that? ■ Is it true that controlling the thickness in the UV region is very difficult due to its thin film? Based on our achievements in visible light, we can achieve high transmission rates in the ultraviolet wavelength range by controlling the deposition process. Additionally, by leveraging our ability to mold aspherical lenses and lens arrays in combination with our deposition technology, we can propose new applications.

• Security cameras and surveillance systems
• Halogen bulbs
• Automated guided vehicles (AGV, RGV)

[To the owners of parking lots and parking lot construction companies] "I am worried about the possibility of colliding with pedestrians when exiting the parking lot..." Among vehicle entrances to parking lots, stores, residences, and factories, those particularly facing sidewalks or roadways are expected to pose risks of dangerous incidents such as pedestrian collisions and vehicle-to-vehicle accidents. To alleviate such concerns, Hotron proposes a [Vehicle Exit Warning Sensor] that detects vehicle departures at various sites and alerts the surrounding area with LED lights and buzzers. The system consists of a simple configuration of "Sensor" + "Controller" + "Switching Power Supply (24V)" + "LED Rotating Light." *When using the exit warning system, we kindly ask that you arrange for the switching power supply (24V), LED rotating light, control panel, circuit breaker, etc. Since it can be retrofitted, it can also be used for existing parking lot entrances. [Contents Included] ○ Exit Warning System Configuration ○ Comparison Table of Exit Warning Sensors ○ Four Modes ○ Wide Range of Applications ○ Customer Feedback ○ Appearance Diagram / Specifications ◎ For more details, please contact us or download the catalog.

In recent times, there has been a growing interest in infection control measures and facility hygiene management. Our company offers non-contact sensor products that are recommended for commercial facilities, food factories, and nursing and caregiving facilities. 【Sensors for Automatic Doors】 ● Light Touch Sensor HA-T401 … When you wave your hand in front of the automatic door, the sensor detects the movement and opens or closes the door. This is recommended for making doors with touch switches non-contact. ● Hand Wave Sensor PF-R5, PF-U2, DHS-1 … Opens and closes the automatic door by waving your hand in front of the sensor. ● Foot Switch PF-01S/01D/03S/05 … Opens and closes the automatic door by placing your foot in the opening. 【Access Control System】 ● Face Recognition + Unmanned Temperature Measurement DS Series … Allows for face recognition along with mask detection and body temperature measurement simultaneously. ● Automatic Disinfectant Spray Dispenser PHW-03B … Automatically sprays disinfectant when you wave your hand in front of the sensor. 【Nursing and Care Sensors】 ● Infrared Bed Exit Sensor "Just Place It Pole-kun" … This bed exit sensor is installed next to the bed and notifies via nurse call when the subject enters the detection range. ◎ For more details, please download the catalog or contact us.

As the new year begins, I would like to extend my heartfelt congratulations on your continued prosperity. I sincerely appreciate your exceptional support throughout the year. This is the STJ Group (Santec Telecom Japan, STJ Rentec). Now, I am pleased to announce that we will be opening our "Transceiver & Smartphone Rental Shop" simultaneously at three locations nationwide on January 26 (Monday)! ■ List of Services to be Offered - Same-day pickup/return of rental equipment - Usage explanations and demonstrations of rental equipment - Wireless solution consultation desk - Mobile BPO service counter As a special promotion to celebrate the opening of the rental shop, we are currently running a special price campaign for rental equipment pickup at the shop! For more details, please contact us!

This is the Agricultural Division of Sumitomo Forestry Greenery Co., Ltd. In our division, we manufacture and sell potting soil for agricultural, horticultural, and greening purposes. In the future, we would like to regularly introduce our products through the Nōsan Girl Letter.

We would like to inform you about our participation in the IT Trend EXPO 2026 Spring. 《Exhibition Information》 With the concept of "New encounters will change the way we work tomorrow," one of the largest online exhibitions in the industry will be held. NTT TechnoCross will be exhibiting in the Human Resources Comprehensive category. We have prepared numerous discussions and sessions featuring special guests who are active on television, allowing even those who are usually busy to efficiently gather information on products and services related to IT and DX. Additionally, the first 10,000 participants will receive a 500 yen Amazon gift card. Please be sure to register early. 《Exhibition Overview》 March 3 (Tuesday) to March 7 (Saturday), 2026, online (free: pre-registration required) 《Participation Registration》 https://it.expo.it-trend.jp/key/opl7kgdj *Please register (free) by clicking "Receive Ticket / Proceed to Participation Registration" at the above URL.