Micro FT-IR imaging measurement

It is possible to visualize the distribution of substances within the specified plane! Suitable for evaluating the diffusion state of substances, etc.

We would like to introduce our "Microscopic FT-IR Imaging Measurement." It allows for the visualization of the distribution of substances as a two-dimensional image within a specified plane. It becomes possible to evaluate changes in the distribution of substances that are difficult to assess with regular point measurements through visible images. [Analysis Suitable for Imaging Measurement] ■ Evaluation of the diffusion state of substances (assessing the mixing of substances in a mixture, identifying the locations of impurities, etc.) ■ Evaluation of molecular structural changes (assessing the degree of oxidation from the surface to the interior of resin products, etc.) ■ Qualitative analysis of micro foreign substances that are difficult to sample *For more details, please download the PDF or feel free to contact us.

• Measurement and Inspection

Essential materials alongside metals and inorganic materials! Introducing examples of analysis and evaluation services for organic materials.

Organic materials such as solvents, additives, pharmaceuticals, and plastics are essential materials alongside metals and inorganic materials. They have a wide variety of types due to the combination of light elements, and their specificity is manifested through structure, intermolecular forces, and electron behavior. However, it seems that chemical instrumentation analysis and evaluation are necessary for a fundamental understanding of their properties. This document presents case studies of analysis and evaluation services for organic materials. [Contents] ■ FT-IR Analysis ■ GC-MS Analysis ■ Molecular Weight Distribution Evaluation by GPC (SEC) *For more details, please refer to the PDF document or feel free to contact us.

• Other analytical equipment
• Measurement and Analysis Equipment

Introducing a method for analyzing the vicinity of the surface through total internal reflection of infrared light by closely adhering micro ATR crystals!

Based on imaging obtained from FT-IR spectra using the ATR method, cross-sectional analysis of organic multilayer films such as aluminum laminate film can be performed. The ATR method (Attenuated Total Reflection) is a technique that involves closely attaching a micro ATR crystal to the sample, allowing for analysis near the surface through total internal reflection of infrared light. Due to the influence of the refractive index of the crystal applied to the sample, the apparent spatial resolution is enhanced, enabling the analysis of smaller foreign substances. 【Features of the ATR Method】 ■ A technique that analyzes near the surface through total internal reflection of infrared light ■ The apparent spatial resolution is enhanced due to the influence of the refractive index of the crystal applied to the sample ■ Enables the analysis of smaller foreign substances *For more details, please refer to the PDF materials or feel free to contact us.

• others

It is possible to investigate the layer composition of organic films! Introducing imaging FT-IR analysis of high-performance multilayer film cross-sections.

It is possible to investigate the layer composition of organic films using FT-IR imaging through transmission of organic multilayer membranes that have been sectioned with a microtome. The document introduces imaging FT-IR analysis of high-performance multilayer film cross-sections using photographs and graphs. 【Imaging FT-IR Analysis of High-Performance Multilayer Film Cross-Sections】 ■Sample: High-performance multilayer film ■Measurement Area: Transmission/Reflection method 175μm, ATR method 35μm ■Spatial Resolution (Pixel Size): Transmission/Reflection method 5.5μm, ATR method 1.1μm *For more details, please refer to the PDF document or feel free to contact us.

• others

If it is at least 5 micrometers, foreign object IR data can be obtained.

■Service Overview 1. Micro ATR Method IR data acquisition of foreign substances is possible if they are approximately 5um or larger. 2. Surface Distribution Image Observation of the in-plane distribution of organic substances is possible. 3. Temporal Changes Measurement of the state of organic substances that change on a second-by-second basis is possible.

• Other analytical equipment

We will introduce the pre-treatment for cross-sectional observation using devices such as band saws for sample cutting!

We would like to introduce the pre-treatment for cross-sectional observation (sample cutting and resin embedding) conducted by Aites Co., Ltd. We use cutting equipment suitable for cutting large substrates and thick components, such as the band saw "HOZAN K-100" and the IsoMet "Buehler Low Speed Saw" for sample cutting. With the "HOZAN K-100," samples up to approximately X150mm, Y230mm, and Z70mm in size can be cut. Additionally, after cutting, the samples are embedded in epoxy resin or similar materials, but it is also possible to embed in resin before cutting. 【Product Lineup】 ■ Band Saw ■ IsoMet ■ Multifunctional Diamond Wire Saw *For more details, please refer to the PDF document or feel free to contact us.

• others

Depth-direction measurements using Raman spectroscopy! Material analysis of each layer is possible from the surface of multilayer films.

Our "Micro Raman Spectrophotometer" employs a confocal optical system, allowing for the adjustment of the focal position in the depth direction, similar to a microscope, enabling material analysis of each layer from the surface of multilayer films. Using the confocal function of the micro Raman spectrophotometer, the focus of the Raman laser light can be varied in the depth direction. Additionally, by continuously changing the focal position, it is possible to acquire spectra continuously in the depth direction. 【Features】 ■ Adoption of a confocal optical system ■ Enables material analysis of each layer from the surface of multilayer films ■ Capable of varying the focus of the Raman laser light in the depth direction ■ Allows for continuous acquisition of spectra in the depth direction *For more details, please refer to the PDF document or feel free to contact us.

• others

[To the owners of parking lots and parking lot construction companies] "I am worried about the possibility of colliding with pedestrians when exiting the parking lot..." Among vehicle entrances to parking lots, stores, residences, and factories, those particularly facing sidewalks or roadways are expected to pose risks of dangerous incidents such as pedestrian collisions and vehicle-to-vehicle accidents. To alleviate such concerns, Hotron proposes a [Vehicle Exit Warning Sensor] that detects vehicle departures at various sites and alerts the surrounding area with LED lights and buzzers. The system consists of a simple configuration of "Sensor" + "Controller" + "Switching Power Supply (24V)" + "LED Rotating Light." *When using the exit warning system, we kindly ask that you arrange for the switching power supply (24V), LED rotating light, control panel, circuit breaker, etc. Since it can be retrofitted, it can also be used for existing parking lot entrances. [Contents Included] ○ Exit Warning System Configuration ○ Comparison Table of Exit Warning Sensors ○ Four Modes ○ Wide Range of Applications ○ Customer Feedback ○ Appearance Diagram / Specifications ◎ For more details, please contact us or download the catalog.

In facilities operating nurse call systems, we have made bed exit sensors wireless, allowing them to notify in conjunction with the nurse call system. By simply connecting the mat sensor "Foldable Thin Matt-kun," the body movement call "Ugo-kun," and the wheelchair body movement call "Ayumi-chan" to the transmitter HB-RS, you can make the bed exit sensor wireless. The infrared sensor "Just Place Pole-kun" has the transmitter HB-RS built-in. This helps prevent accidents caused by falls, slips, or wandering, contributing to the efficiency of medical operations. 【Features】 ○ Wireless conversion by simply connecting existing sensors to the transmitter HB-WSK. ○ Bed exit sensors notify wirelessly in conjunction with the nurse call system. ○ Up to 5 transmitters can be registered with one receiver. ○ The communication distance between the transmitter and receiver is approximately 10 meters. ◎ For more details, please contact us or download the catalog.

On December 23rd (Tuesday), the Japan Meteorological Agency announced the three-month forecast for January to March. During this period, there will be times when the extension of the Siberian high pressure is weak to the northeast and strong to the southeast, which may lead to the influence of cold air from the west. As a result, temperatures nationwide are expected to be nearly average from January to February. For more details, please visit our company website.

The "HA-T Series" is an energy-saving automatic door sensor that opens only for those who want to enter, whether on a busy street or in a narrow passageway. The automatic door opens simply by bringing your hand close, addressing hygiene concerns even in facilities used by a large number of people. Depending on the application and installation location, you can choose between "Non-vision Mount Type/HA-T401" and "Non-vision Built-in Type/HA-T520." 【Recommended for such places!】 ☑ Entrance facing a busy passageway ☑ Presence of counters or signs near the door ☑ Buildings facing narrow passageways ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors 【Features】 ● Adaptable to various door types with four detection spot settings ● Reduces unnecessary opening and closing to minimize power consumption, contributing to energy-saving effects ● Equipped with a light touch function, allowing the door to open and close simply by waving your hand, ensuring hygiene ● Can also be used as a wide detection range non-vision infrared sensor ◎ For more details, please download the materials or contact us.

Full and empty management refers to the real-time display of parking availability and the management of efficient use of parking spaces. By utilizing Hotron's sensors, drivers can quickly discover available parking spaces, achieving efficient parking lot operations. ■ For large parking lots, the "floor management method" and "block management method," which focus on cost reduction, are recommended. Sensors are installed at regular intervals to count the number of vehicles passing through. This method offers the advantage of easy installation and low costs. 【Target Products】 - Vehicle Count Sensor CCS2 - Ultrasonic Sensor HM-UX2/UW2 ■ For smaller scale operations, the "space management method," which installs sensors in each parking space to display availability with high accuracy, is recommended. By ensuring accurate full and empty displays, it helps prevent unnecessary entry of new vehicles and enables safe parking lot operations. 【Target Products】 - Occupancy Detection Sensor HM-UX2/UW2 - Occupancy/Pass Detection Sensor HM-LC6 - Occupancy Detection Sensor HM-LC7/LC7-FLS - Occupancy/Pass Detection Sensor HM-S6 - Occupancy Detection Sensor HM-S8