PERI products are used at construction sites around the world. (Bangkok, Thailand: KingBridge Tower)

Publication about the large wall formwork system using the PERI truss beam GT24!

This catalog features the "VARIO GT24" handled by PERI Japan Co., Ltd. The "VARIO GT24" is a truss beam wall formwork system that uses adjustable slot fittings. By using it, it is possible to accurately assemble dimension panels tailored to each project. "VARIO means... versatility." It is utilized on sites that require large formwork, such as bridge pier construction, retaining wall construction, and LNG containment embankments! Please take a moment to read the catalog. [Contents (partial)] ■ Truss beam panel formwork VARIO GT24 / TRIO ■ Truss beam wall formwork system (VARIO GT24) ■ Supports complex structural shapes with standard system components ■ PERI truss beam GT24 ■ Standard system components for VARIO GT24 panels *For more details, please refer to the PDF document or feel free to contact us.

• Formwork material

It is a resin-based formwork system reinforced with fiberglass! <NETIS registration number: KT-230004-A>

Realization of weight reduction through the integration of end materials. Achieving an increase in the number of reuse cycles, this is an environmentally friendly lightweight formwork that is flexible on the construction site! 【DUO Product Features】 ■ New system formwork made of resin ■ High strength and lightweight ■ Fewer components, easy to handle ■ 100% recyclable ＜Simple Assembly Method＞ ・Anyone can easily install it ・No electric tools required ・Vertical and horizontal pipes are not necessary (depending on the construction situation) → Reduces labor costs! ＜Lightweight Resin Formwork＞ ・Easy to carry ・No processing work on site → High workability and shortened construction period! ＜Durable Resin Panels＞ ・Reuse cycles for face panels: 80 to 100 times (Replacement of face panels is possible.) ・Easy to clean → Reduces material costs and waste! ＜NETIS Registration Number: KT-230004-A＞ https://www.netis.mlit.go.jp/netis/

• Concrete construction

Construction kit system for various projects requiring self-elevating technology.

The "PERI RCS Rail Climbing System" is a climbing system that serves as a formwork-integrated scaffold and self-climbing protection panel. There are two methods of climbing: one using a crane and the other using a movable hydraulic device instead of a crane, allowing for selection based on the construction requirements. Additionally, the climbing formwork-integrated scaffold comes standard with a carriage equipped with push-pull support. 【Product Features】 ■ Safe rail-guided procedure - The moving unit is always connected to the building by climbing shoes. ■ Flexible installation - Climbing shoes can be attached to walls and slab edges. ■ Variable assembly - The arrangement of 125mm holes in the climbing rail allows the platform to be adjusted to the height of each floor. *For more details, please refer to the PDF materials or feel free to contact us.

• Formwork material

The "HM-S6" is an embedded park sensor that detects vehicles through changes in magnetic flux and responds to various situations from passing to stationary vehicles. It can be used for the opening and closing of input doors at waste treatment plants, as well as for gates that vehicles pass through and outdoor parking applications. It can also be installed on rebar and steel plates. 【Features】 ■ Resistant to the effects of natural environments such as rain, snow, temperature changes, and geomagnetism ■ Protection rating IP68 reduces the risk of water ingress ■ Ten times the load capacity compared to conventional embedded park sensors (based on our comparison) ■ Can distinguish between vehicles even when they pass continuously ■ Can be installed on rebar and steel plates *For more details, please refer to the PDF document or feel free to contact us.

Thank you very much for visiting our company website and catalog, and for your interest in our diesel engine generators. From customer surveys, the most common feedback we received was: - I want to see the actual generators that have been installed. - I want to see them operating under real load. - I want to hear the opinions of companies that have installed them. - I want to see the generators in operation before making a purchase. After all, it’s understandable to feel worried about purchasing a generator without seeing the actual unit first, right? As the saying goes, "Seeing is believing," so we will be holding this tour. It will take place in that area of the Kanto region, where summer temperatures exceed 40°C. We successfully operated our generators this summer as well, so we are confident in handling the heat (sweat). Additionally, it has been confirmed that our generators equipped with the world-leading "Scania engine" are "fuel-efficient." This will surely help reduce daily operating costs. Please note that while we will provide kind and courteous assistance, the meeting and dispersal will be at the site (transportation costs and other expenses will be borne by the customer), so please understand this in advance. Contact: Kaneko

The "CCS2" is a ceiling-mounted vehicle counting sensor that employs an infrared reflection method. It can detect vehicles in both directions with a single unit, accurately counting vehicles even during traffic jams or when vehicles pass each other. Additionally, this product can be used not only for vehicle counting but also as a sensor for departure warnings. Furthermore, by using a separately sold dedicated remote control, it is easy to reset the sensor alone, switch the counting direction, and change the patterns of the departure warning timer. 【Features】 ■ Angle adjustment up to ±5° ■ Can be installed in locations with high ceilings up to 4m ■ Detection area consists of 40 spots, allowing for extensive detection ■ The display LEDs are color-coded by direction, making operation confirmation easy.

We will introduce the implementation results of the sensor technology developed by the Hotron Group, which has been cultivated over more than half a century, through customer case studies. In addition to automatic door sensors, we also offer a wide range of vehicle detection sensors and nursing/care sensors. We have many implementation examples available, so please take a look at the case study page.

Thank you very much for using our services. We have added a new service site. https://fusions.jp/fus-lp This is an introduction to the following services that will assist in sales and recruitment activities. * Sales... "Automatic sending of business negotiations to salespeople" * HR... "Elimination of miscellaneous tasks for the recruitment team" ⭕️ We are currently offering a free case study collection that you can implement in your own company with a 2-minute survey!