Notice of Participation in the "Yakiniku Business Fair / Izakaya JAPAN"

Virus inactivation and sterilization with mercury-free excimer lamp [Medical device approval obtained]

The mercury-free excimer lamp generates ozone to inactivate and sterilize airborne and surface viruses and bacteria. You can choose from two types, "Eximan S" and "Eximan M (approved as a controlled medical device)," depending on the location and application. The installation methods include "ceiling-mounted/direct ceiling type" and "ceiling recessed type," making it possible to install in any location, from existing buildings to new constructions. <Features> 1: Obtained approval as a controlled medical device It is the first ceiling-mounted ozone gas sterilization device to receive approval as a controlled medical device (Class 2). 2: The world's first environmental revolution It adopts a mercury-free excimer lamp using the excited dimer method with xenon. It does not use mercury, which is an environmental pollutant. 3: Sterilization, deodorization, and disinfection with one unit In unoccupied spaces, high concentrations of ozone fumigation act on both airborne and surface bacteria, sterilizing the entire area. In occupied spaces, it releases low concentrations of ozone for deodorization and disinfection. 4: Maintenance management Ozone is generated from oxygen in the air, so there are no raw material costs. The released ozone returns to oxygen, leaving no residue.

• others

Optimal for addressing odor control needs in the neighborhood.

Arushiman is a deodorizing device for kitchen exhaust that was developed using nanoparticle technology. It achieves high deodorization effectiveness and long filter life through two mechanisms: "adsorption and desorption" and "catalytic decomposition" enabled by nanoparticle technology. By installing the necessary number of deodorizing filters according to the processing air volume, it can accommodate various requests and shapes, addressing complaints in regulated areas under the Odor Prevention Law and concerns about cooking odors emitted from kitchens, thus meeting the needs for odor control in neighboring areas.

• others

Quickly deodorize and disinfect the space, creating a comfortable environment with "Radica."

The wall-mounted ozone deodorization device "Radica" is an ozone deodorization system that can be installed in various locations, from existing buildings to newly constructed ones. Since it can be installed individually, it is also possible to adjust the concentration for each room. <Features> 1: Generation of pure ozone By adopting a lamp method, it is capable of generating ozone that does not contain NOx (nitrogen oxides) or impurities. 2: Low running costs The use of an inverter-type cold cathode lamp extends the lamp's lifespan and achieves low running costs. 3: Safety control With automatic operation via a timer, no manual operation is required. The ozone amount can be set according to the room size and odor level. 4: Easy installation Compatible with power outlets, making installation simple. It can also be retrofitted to existing buildings. For more details, please contact us or download the catalog.

• others

"Somewhat inconvenient" can quickly transform into "cost" and "risk" due to an increase in the number of employees or an expansion of business scope. What we are introducing this time is the process of a home care industry company with around 700 employees verbalizing their frustrations regarding payroll operations and considering the optimal system configuration. When we verbalize "somewhat inconvenient"... 1) The support quality of the payroll system being used is poor, causing significant stress. 2) The number of employees has been on the rise in recent years, raising concerns about running costs due to the pay-per-use system. 3) Macros are being used for data integration with a separate system. 4) We want to make backend processes like payroll payment reports easier. Information from iBP What is important here is to decide how to handle the multiple issues that have arisen, which is the "prioritization of tasks." You can read more without needing to input personal information. Please visit the iBusiness Partners column page! https://ibp-column.sfsite.me/36302

[To the owners of parking lots and parking lot construction companies] "I am worried about the possibility of colliding with pedestrians when exiting the parking lot..." Among vehicle entrances to parking lots, stores, residences, and factories, those particularly facing sidewalks or roadways are expected to pose risks of dangerous incidents such as pedestrian collisions and vehicle-to-vehicle accidents. To alleviate such concerns, Hotron proposes a [Vehicle Exit Warning Sensor] that detects vehicle departures at various sites and alerts the surrounding area with LED lights and buzzers. The system consists of a simple configuration of "Sensor" + "Controller" + "Switching Power Supply (24V)" + "LED Rotating Light." *When using the exit warning system, we kindly ask that you arrange for the switching power supply (24V), LED rotating light, control panel, circuit breaker, etc. Since it can be retrofitted, it can also be used for existing parking lot entrances. [Contents Included] ○ Exit Warning System Configuration ○ Comparison Table of Exit Warning Sensors ○ Four Modes ○ Wide Range of Applications ○ Customer Feedback ○ Appearance Diagram / Specifications ◎ For more details, please contact us or download the catalog.

In facilities operating nurse call systems, we have made bed exit sensors wireless, allowing them to notify in conjunction with the nurse call system. By simply connecting the mat sensor "Foldable Thin Matt-kun," the body movement call "Ugo-kun," and the wheelchair body movement call "Ayumi-chan" to the transmitter HB-RS, you can make the bed exit sensor wireless. The infrared sensor "Just Place Pole-kun" has the transmitter HB-RS built-in. This helps prevent accidents caused by falls, slips, or wandering, contributing to the efficiency of medical operations. 【Features】 ○ Wireless conversion by simply connecting existing sensors to the transmitter HB-WSK. ○ Bed exit sensors notify wirelessly in conjunction with the nurse call system. ○ Up to 5 transmitters can be registered with one receiver. ○ The communication distance between the transmitter and receiver is approximately 10 meters. ◎ For more details, please contact us or download the catalog.

We have released an introduction document for our cloud management system "Loglass." This document clearly presents the features and usage images of "Loglass," which streamlines management tasks such as budget formulation, performance management, forecast updates, and management accounting. Loglass centralizes data scattered across various systems and spreadsheets, reducing the effort required for collection, aggregation, and analysis, thereby supporting quicker and more accurate management decisions. Additionally, it helps address challenges such as the personalization of management tasks and increased workload through automation of data aggregation, history management, and real-time analysis functions. The document also includes actual implementation examples and the effects of implementation, showcasing results such as reduced workload, enhanced analysis capabilities, and improved decision-making speed. Companies considering promoting DX in management or reviewing operations centered around Excel and spreadsheets are encouraged to take a look.

We will introduce the implementation results of the sensor technology developed by the Hotron Group, which has been cultivated over more than half a century, through customer case studies. In addition to automatic door sensors, we also offer a wide range of vehicle detection sensors and nursing/care sensors. We have many implementation examples available, so please take a look at the case study page.