【Product News】PERI climbing systems 'RCS', 'ACS', and 'CB' are used at construction sites around the world.

Construction kit system for various projects requiring self-elevating technology.

The "PERI RCS Rail Climbing System" is a climbing system that serves as a formwork-integrated scaffold and self-climbing protection panel. There are two methods of climbing: one using a crane and the other using a movable hydraulic device instead of a crane, allowing for selection based on the construction requirements. Additionally, the climbing formwork-integrated scaffold comes standard with a carriage equipped with push-pull support. 【Product Features】 ■ Safe rail-guided procedure - The moving unit is always connected to the building by climbing shoes. ■ Flexible installation - Climbing shoes can be attached to walls and slab edges. ■ Variable assembly - The arrangement of 125mm holes in the climbing rail allows the platform to be adjusted to the height of each floor. *For more details, please refer to the PDF materials or feel free to contact us.

• Formwork material

Construction kit system for various works requiring self-elevating technology.

The "PERI ACS Automatic Climbing System" is an integrated climbing system that serves as a self-climbing working scaffold and a large formwork panel system. 【Product Features】 ■ It is possible to climb with an integrated system of working scaffold and large formwork. ■ It uses hydraulic cylinders (rising 4 to 6 meters in about 20 minutes per batch). ■ Climbing is possible on both the outer side and the hollow of bridge piers. ■ Formwork can be safely and easily constructed and stripped on the main stage. ■ By placing the formwork on a carriage that can move back and forth on the stage, construction and stripping work for each concrete pouring batch can be performed safely and efficiently. *For more details, please refer to the PDF document or feel free to contact us.

• Systems Architecture

Integration of climbing work scaffolding and the large wall formwork system VARIO for construction!

The "CB Climbing Bracket System" is a climbing system that integrates a working scaffold with the large wall formwork system VARIO. 【Product Features】 ■ It integrates the working scaffold and large wall formwork, allowing for climbing with a crane. ■ It is ideal for construction of high continuous sections, such as LNG storage tanks. ■ It reduces the labor of assembling and dismantling scaffolding, leading to labor savings and shortened construction periods. ■ By placing the formwork on a carriage that can move back and forth on the stage, it enables safe and efficient construction and stripping operations for each concrete pouring batch. *For more details, please refer to the PDF document or feel free to contact us.

• Systems Architecture

Exhibition of system formwork born in Germany! What is system formwork? I want to see the actual system formwork! Please feel free to contact us for more information!

At Perry Japan, we have a stockyard and product exhibition area. Ibaraki Stockyard 〒311-3155 Ibaraki Prefecture, Higashi Ibaraki District, Ibaraki Town, Shimohashi 2000-12 TEL: 029-219-0800 FAX: 029-219-0801 At Perry Japan, we conduct tours of the system formwork product exhibition hall, study sessions on system formwork, assembly experiences, and product seminars at the Ibaraki Stockyard, based on the concept of "Listen, See, Touch/Ride, Assemble" to meet our customers' needs. * What kind of company is Perry? * What is system formwork? * How is system formwork used? * I know about system formwork, but I've never used it. * I want to see the actual product before purchasing or renting! * And more. Please come and see our products at the Ibaraki Stockyard. For inquiries about tours, study sessions, or product seminars, feel free to contact us.

• Systems Architecture

In February of this year, we inquired about "paperlogic" using the Ministry of Economy, Trade and Industry's gray zone resolution system regarding the "provision of electronic contract services to the construction industry," and received a response stating that "paperlogic meets the standards related to construction contracts under the Construction Business Act Enforcement Regulations (Article 13-4, Paragraph 1, Item 1 (h) and Paragraph 2)." ◆ Accelerating DX in the Construction Industry with 'Official Approval' The construction industry faces challenges in digitizing contract operations due to the complexity of contracts, the presence of numerous stakeholders, and legal requirements and security concerns. However, due to the nature of the industry, detailed contract operations occur frequently. Therefore, by digitizing contract operations, the industry can benefit significantly from cost reductions in stamp duties and labor costs, as well as shortened timeframes for contract execution. ◆ Package Plans for the Construction Industry Available At paperlogic, we also offer the 'paperlogic Construction Document DX Pocket,' designed to facilitate smoother transactions between general contractors and partner companies. Please feel free to try our trial service from the "Service Application" section.

The non-contact beam touch sensor "HA-T401/HA-T520" has a compact detection range, making it an ideal automatic door sensor for installation on automatic doors facing narrow corridors or busy streets. Depending on the application and installation location, you can choose between "non-vision mounting type" and "non-vision built-in type." 【Features】 ● With the beam touch sensor, you can open and close the automatic door simply by bringing your hand close without touching it, ensuring hygiene. ● Depending on the installation environment, such as single sliding or bi-parting doors, the detection range can be set in four configurations: left, center, right, and a total of 12 spots. ● Two types of activation row settings are available to reduce unnecessary opening and closing of the automatic door due to cross traffic, contributing to energy-saving effects. ● The touch switch and infrared sensor are integrated, allowing for a switch between beam touch and infrared sensor with a single model. 【Recommended for such locations!】 ☑ Entrance facing a busy corridor ☑ Counter or sign near the door ☑ Buildings facing narrow corridors ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors ◎ For more details, please download the materials or contact us.

To customers considering the introduction of vehicle detection sensors for parking lot construction, design, or management: Are you facing any challenges with current issues or selecting the right sensors for parking management? Hotron offers free materials that explain how to utilize vehicle detection sensors and the benefits of their introduction! ▽ Here is the lineup of materials ◉ Vehicle Detection Sensor Basic Guide This guide focuses on the challenges and solutions in parking lot operations, introducing the overview of vehicle detection sensors. ◉ Key Points for Introducing Vehicle Detection Sensors This material discusses the benefits of introduction based on installation locations and specific challenges. ◉ Case Studies of Vehicle Detection Sensor Implementation This document presents the challenges before implementation and the results after introduction. For more details, please download from our website and check it out. https://www.hotron.co.jp/download/

Real-time visualization of displacement measurements from a power-free and wiring-free inclinometer on BIM/CIM. Sonas Inc. (Bunkyo-ku, Tokyo: CEO Sotarou Ohara, hereinafter referred to as "Sonas") and Cork Inc. (Toshima-ku, Tokyo: Representative Director Masao Tsutsumi, hereinafter referred to as "Cork") have announced that measurement data obtained from Sonas's "Wireless Inclinometer Monitoring System" can now be integrated via API into Cork's BIM/CIM cloud "KOLC+", allowing the inclination amount and direction to be displayed as a 3D graph on a digital twin dashboard.

We, SUNITED Co., Ltd., are pleased to announce that we have been selected as an "IT Implementation Support Provider" under the "IT Implementation Subsidy Program for Improving Productivity in Services and Other Sectors" (hereinafter referred to as the IT Implementation Subsidy) overseen by the Ministry of Economy, Trade and Industry. As a result, companies that meet the criteria will be able to reduce their costs when introducing IT tools that have been certified for subsidies by our company. *Please note that there are conditions for using this program. For details, please check the "IT Implementation Subsidy" website. - IT Implementation Subsidy (https://it-shien.smrj.go.jp/) As an IT Implementation Support Provider, we will continue to fully support small and medium-sized enterprises in improving their operational efficiency and productivity.