New release: A compact active oxygen generator, Polaris 0.5, that decomposes waste using only active oxygen without fire, reducing it to 1/300 of its original ash, significantly lowering industrial waste disposal costs and being environmentally friendly.

Polaris 3.0 can decompose waste such as plastic waste, petroleum products, and medical waste into ash at a ratio of 1/300 using only reactive oxygen without using fire, significantly reducing industrial waste disposal costs.

What is active oxygen? Active oxygen is the substance with the highest oxidation capability on Earth. When humans breathe, they instantly sterilize bacteria and viruses in the atmosphere through the oxidation action of the active oxygen they produce. Active oxygen not only has strong oxidative properties but also possesses the ability to dry organic materials in a short time. A groundbreaking technology that artificially generates active oxygen was invented in Japan, leading to the creation of Polaris, a waste decomposition treatment device with strong drying capabilities that utilizes this active oxygen generation device. Polaris can heat active oxygen at low temperatures, without using fire, and can reduce organic waste such as plastics, wood, and polystyrene to ash about 1/300th of its original volume in an environment with an oxygen concentration below 15%. The engineer who invented this active oxygen generation technology was awarded the Order of the Rising Sun, Gold Rays with Rosette by His Majesty the Emperor in April 2022. Polaris, which enables decomposition treatment using only active oxygen without fire, is capable of decomposing solid organic materials such as resins, petrochemical products, plastics, polystyrene, urethane, films, sheets, cardboard, and wood at low temperatures. Polaris 3.0 is the largest device in the series, with a capacity of 3 cubic meters, capable of decomposing waste.

• Welfare and medical equipment
• Garbage disposal, central dust collection, laundry, compressor
• Waste treatment facility

A small machine, Polaris 0.5, that decomposes plastics, expanded polystyrene, urethane, films, etc., into ash at a ratio of 1/300 using active oxygen, significantly reducing industrial waste disposal costs.

What is active oxygen? Active oxygen is said to be the substance with the highest oxidation capability on Earth. When humans breathe, the active oxygen produced by the body instantly oxidizes and kills bacteria and viruses in the atmosphere. Active oxygen not only has strong oxidative properties but also possesses the ability to dry organic matter in a short time. A groundbreaking technology that artificially generates active oxygen was invented in Japan, leading to the creation of the Polaris, an organic waste decomposition treatment device with strong drying capabilities that uses this active oxygen generation device (AOS). "Polaris" is a device that can turn organic waste such as plastics, wood, and polystyrene into ash approximately 1/300th of its original volume by heating active oxygen at low temperatures, without using fire, in an environment with an oxygen concentration of 15% or less. The engineer who invented this technology for generating active oxygen was awarded the Order of the Rising Sun, Gold Rays with Rosette by His Majesty the Emperor in April 2022. Polaris, which enables decomposition treatment using only active oxygen without fire, is capable of decomposing solid organic materials such as resins, petrochemical products, plastics, polystyrene, urethane, films, sheets, cardboard, and wood at low temperatures. Polaris 0.5 is the smallest device in the Polaris series.

• Welfare and medical equipment
• Garbage disposal, central dust collection, laundry, compressor
• Waste treatment facility

Hotron, which manufactures and sells sensors, provides bed exit sensors for hospitals, nursing, and care facilities. Hotron offers easy-to-understand video guidance on how to use bed exit sensors wirelessly and how to set up device connections! ▼ Video Manual (YouTube) https://www.youtube.com/playlist?list=PLNVA4mTrZDqtJa6MfFRZQxwtfCSnAfxVy 【Bed Exit Sensors】 ○ Non-contact infrared sensor, simply place it - Pole-kun HB-H1 ○ Mat sensor, foldable thin mat - Mat-kun HB-UST ○ Body movement call - Ugo-kun HB-TV3 ○ Body movement call for wheelchairs - Ayumi-chan HB-WTV3 【Options】 ○ Nurse call linked wireless set - Wireless set (transmitter/receiver) HB-RS/HB-RJ ◎ For more information about the products, please contact us or download the catalog.

Japan is one of the top 10 countries in the world with frequent earthquakes. The 2020 White Paper on Land, Infrastructure, Transport and Tourism has also reported an increase in the probability of major earthquakes occurring. Regarding the Nankai Trough earthquake, the probability of an earthquake with a magnitude of 8 to 9 occurring within the next 30 years is estimated to be 70 to 80%. At Hotron, we recommend the introduction of seismic devices for earthquake countermeasures in buildings and equipment. The seismic device 'HK-2' is a product that automatically performs various controls that have been pre-set when it detects strong shaking equivalent to a seismic intensity of 5 lower or higher. For example, it can automatically execute actions such as: "Open automatic doors and gates to secure evacuation routes and access for emergency vehicles" "Transmit signals to the control room and stop facility equipment" "Unlock the keys to locked lockers" "Automatically play voice guidance" For more details, please download the materials or contact us.

Ricoh PFU Computing Co., Ltd.'s embedded computer 'AR2100-120R' has completed the operational evaluation of the real-time OS "INtime" and is now INtime Ready. For the evaluation results of real-time performance, please see the following page. ◆ Measurement results of real-time performance and EtherCAT operation performance of 'AR2100-120R' https://www.mnc.co.jp/INtime/PC_Eval_report.html ◆ The embedded computer 'AR2100-120R' is ideal for embedded and edge computing applications https://rpc.ricoh.com/products/epc/ar/ar2x00_120r ◆ Pre-installed PC products with PC and real-time OS https://www.mnc.co.jp/SI/preinstallpc.htm #IndustrialPC #IPC #Control #RealTimeOS #EtherCAT #Controller

This is Daidore Co., Ltd. We have launched a "contract manufacturing and custom prototyping service" using the latest metal 3D printers. As our first sample, we created a company nameplate for our mascot "D-Dora-kun." By intentionally not machining it and utilizing the layering marks (beads) as a design element, we express the solid feel and three-dimensionality unique to solid wood. ■ Our Strengths - Custom orders without molds: Quick response to prototypes and restoration of discontinued parts using only data. - Large-scale manufacturing and build-up technology: Capable of producing up to 2000×1000×1000mm and performing build-up repair processing on existing parts. - Expertise in materials: Leveraging our know-how in manufacturing drainage fixtures, we propose various high-corrosion-resistant alloys such as SUS316L. ■ Equipment Specifications (MELTIO Robot Cell) - Method: Wire laser DED method - Compatible materials: Stainless alloys, mild steel, titanium, nickel, copper alloys, etc. If you want to "reduce mold investment" or "create parts with special shapes," please feel free to consult our Development Promotion Department!

The comprehensive production management system "TED Ver.3.0," developed and sold by Profect Co., Ltd., has received the "Excellence Award" in the Software category at the "38th Small and Medium Enterprises Excellent New Technology and New Product Award," co-sponsored by the Resona Foundation for Small and Medium Enterprise Promotion and Nikkan Kogyo Shimbun (announced in the April 15, 2026 edition of Nikkan Kogyo Shimbun). This award is a prestigious recognition that honors outstanding new technologies and products, supported by the Ministry of Economy, Trade and Industry's Small and Medium Enterprise Agency and the Organization for Small & Medium Enterprises and Regional Innovation. ■ Message from President Shiro Abe This system was developed with the participation of eight small manufacturing companies from across the country as "stakeholders," and it was created by thoroughly examining whether it can truly be used on-site and whether it can lead to profits, rather than being just theoretical. We believe that in DX (digital transformation), what is important is "who to work with." Moving forward, we will continue to enhance our functions and support for implementation, and we will strive to create new value together with everyone under the banner of "restoring manufacturing."