Thank you for visiting the 38th NePCON Japan from January 24 to 26. [Industrial Equipment Division]

Thank you for visiting the 38th Internepcon Japan Electronics Manufacturing and Assembly Exhibition.

You can view information about the products exhibited on that day here. 〇Industrial Equipment Division 　・Flying Probe Tester APT-1600FD-A (Assembly Board Inspection Device) 　　Unmanned continuous inspection linked with front and rear devices 　　OPC-UA (OPC Unified Architecture) 　　Linked with MES (Manufacturing Execution System) 　　Real-time information collection and management of operational status 〇RF Division/Solutions Division 　・RFID Outgoing Management System 　・RFID UHF Band Continuous Monitoring System 　・Work performance collection using RFID/Semiconductor IC tag reading 　・RFID×IoT Data Device "RFID Performance Collection System" 　・Easy replacement from barcode HID reader/key input tool

• RFID/IC tags

Exhibiting at Nepcon 2024 from January 24! We contribute to solving challenges in the manufacturing field through ultra-fast inspection of mounted boards and system improvements utilizing RFID.

We will be exhibiting new products and technologies at the 38th NePCON Japan! 〇Industrial Equipment Division APT-1600FD Dual-Side Flying Probe Tester A flagship model that allows simultaneous inspection of both sides by placing probe heads on the top and bottom of the board. Utilizing OPC-UA (OPC Unified Architecture), our unique software links with customers' MES (Manufacturing Execution System) to collect and manage operational information in real-time (first-time exhibit). 〇RF Division RFID x IoT Data Service "RFID Work Performance Collection System" Data from IC tags can be sent to the cloud via MQTT just by placing them, enabling data collection. The collected data is visualized through a dashboard function, achieving "visualization of work performance." Since the reader/writer is autonomous, there is no need for a control PC or software development for both HF and UHF bands. Record management of items taken out with just a touch "Item Management System" Utilizing IC tags to reliably record the history of items taken out and returned, preventing omissions and errors in ledger entries, and supporting early detection of forgotten returns and losses. Efficient inventory checks are possible through bulk reading with RFID handheld devices. Many other exhibits are also planned.

• Measurement and Inspection

This is a flagship model that arranges probe heads above and below, enabling simultaneous in-circuit testing of both sides of the substrate.

Four probes are arranged on the top side of the substrate and two on the bottom side. Each probe can move freely and at high speed, achieving an astonishing inspection speed that is world-class in standard. By using the upper and lower flying probes simultaneously, a combination inspection of up to six probes allows for simultaneous contact inspection at both points on the top and bottom sides of the substrate. This significantly expands the inspection range and further accelerates inspection time. It is equipped with a wealth of features and boasts world-class standards in speed and positioning accuracy. ★You can bring your substrate to our demo room at our Okayama headquarters for evaluation testing★ We can conduct a series of tests including the creation of inspection programs, inspections using actual substrates, and summarizing evaluation results. If you are interested, please apply through the 'Contact Us' section below.

• Measurement and Inspection

Exhibiting at Nepcon 2024 from January 24! Achieving interoperability between industrial equipment and MES systems!

OPC UA (OPC Unified Architecture) is an open international standard developed for safe and reliable data exchange in industries such as industrial automation. It was announced by the OPC Foundation in 2008 and later standardized as IEC62541. It enables secure and highly reliable data exchange across various types of devices, operating systems, and manufacturers, making it recommended as the standard communication for Industrie 4.0 and increasingly adopted worldwide. Additionally, it is aligned with the international standard for PLCs, IEC61131-3, providing the advantage of high reliability in exchanging information from the manufacturing site with higher-level monitoring control systems and Manufacturing Execution Systems (MES). In response to this trend, Takaya has prepared an option to equip the APT series of flying probe testers with an OPC UA server. We are working to promote the adoption of industrial IoT standards that bridge FA equipment and IT.

• Measurement and Inspection

Programming for FPGAs and special performance tests such as BST can be handled with a flying probe tester.

This is an option that equips the underside operating axis of the APT-1600FD series with a dedicated fixture lifting mechanism. It allows for special inspections connected to external devices, such as Boundary Scan Testing (BST), as well as writing to and reading logs from ICs, to be performed in parallel with in-circuit testing. *Please refer to the YouTube video for an image of the operation.

• Measurement and Inspection

[To the owners of parking lots and parking lot construction companies] "I am worried about the possibility of colliding with pedestrians when exiting the parking lot..." Among vehicle entrances to parking lots, stores, residences, and factories, those particularly facing sidewalks or roadways are expected to pose risks of dangerous incidents such as pedestrian collisions and vehicle-to-vehicle accidents. To alleviate such concerns, Hotron proposes a [Vehicle Exit Warning Sensor] that detects vehicle departures at various sites and alerts the surrounding area with LED lights and buzzers. The system consists of a simple configuration of "Sensor" + "Controller" + "Switching Power Supply (24V)" + "LED Rotating Light." *When using the exit warning system, we kindly ask that you arrange for the switching power supply (24V), LED rotating light, control panel, circuit breaker, etc. Since it can be retrofitted, it can also be used for existing parking lot entrances. [Contents Included] ○ Exit Warning System Configuration ○ Comparison Table of Exit Warning Sensors ○ Four Modes ○ Wide Range of Applications ○ Customer Feedback ○ Appearance Diagram / Specifications ◎ For more details, please contact us or download the catalog.

In recent times, there has been a growing interest in infection control measures and facility hygiene management. Our company offers non-contact sensor products that are recommended for commercial facilities, food factories, and nursing and caregiving facilities. 【Sensors for Automatic Doors】 ● Light Touch Sensor HA-T401 … When you wave your hand in front of the automatic door, the sensor detects the movement and opens or closes the door. This is recommended for making doors with touch switches non-contact. ● Hand Wave Sensor PF-R5, PF-U2, DHS-1 … Opens and closes the automatic door by waving your hand in front of the sensor. ● Foot Switch PF-01S/01D/03S/05 … Opens and closes the automatic door by placing your foot in the opening. 【Access Control System】 ● Face Recognition + Unmanned Temperature Measurement DS Series … Allows for face recognition along with mask detection and body temperature measurement simultaneously. ● Automatic Disinfectant Spray Dispenser PHW-03B … Automatically sprays disinfectant when you wave your hand in front of the sensor. 【Nursing and Care Sensors】 ● Infrared Bed Exit Sensor "Just Place It Pole-kun" … This bed exit sensor is installed next to the bed and notifies via nurse call when the subject enters the detection range. ◎ For more details, please download the catalog or contact us.

As the new year begins, I would like to extend my heartfelt congratulations on your continued prosperity. I sincerely appreciate your exceptional support throughout the year. This is the STJ Group (Santec Telecom Japan, STJ Rentec). Now, I am pleased to announce that we will be opening our "Transceiver & Smartphone Rental Shop" simultaneously at three locations nationwide on January 26 (Monday)! ■ List of Services to be Offered - Same-day pickup/return of rental equipment - Usage explanations and demonstrations of rental equipment - Wireless solution consultation desk - Mobile BPO service counter As a special promotion to celebrate the opening of the rental shop, we are currently running a special price campaign for rental equipment pickup at the shop! For more details, please contact us!

This is the Agricultural Division of Sumitomo Forestry Greenery Co., Ltd. In our division, we manufacture and sell potting soil for agricultural, horticultural, and greening purposes. In the future, we would like to regularly introduce our products through the Nōsan Girl Letter.

We would like to inform you about our participation in the IT Trend EXPO 2026 Spring. 《Exhibition Information》 With the concept of "New encounters will change the way we work tomorrow," one of the largest online exhibitions in the industry will be held. NTT TechnoCross will be exhibiting in the Human Resources Comprehensive category. We have prepared numerous discussions and sessions featuring special guests who are active on television, allowing even those who are usually busy to efficiently gather information on products and services related to IT and DX. Additionally, the first 10,000 participants will receive a 500 yen Amazon gift card. Please be sure to register early. 《Exhibition Overview》 March 3 (Tuesday) to March 7 (Saturday), 2026, online (free: pre-registration required) 《Participation Registration》 https://it.expo.it-trend.jp/key/opl7kgdj *Please register (free) by clicking "Receive Ticket / Proceed to Participation Registration" at the above URL.