January 24-26: Introduction of Exhibited Products from the 38th Neppon Japan Industrial Equipment Division. We invite you to watch the demonstrations and share your feedback with us.

Thank you for visiting the 38th Internepcon Japan Electronics Manufacturing and Assembly Exhibition.

You can view information about the products exhibited on that day here. 〇Industrial Equipment Division 　・Flying Probe Tester APT-1600FD-A (Assembly Board Inspection Device) 　　Unmanned continuous inspection linked with front and rear devices 　　OPC-UA (OPC Unified Architecture) 　　Linked with MES (Manufacturing Execution System) 　　Real-time information collection and management of operational status 〇RF Division/Solutions Division 　・RFID Outgoing Management System 　・RFID UHF Band Continuous Monitoring System 　・Work performance collection using RFID/Semiconductor IC tag reading 　・RFID×IoT Data Device "RFID Performance Collection System" 　・Easy replacement from barcode HID reader/key input tool

• RFID/IC tags

Exhibiting at Nepcon 2024 from January 24! We contribute to solving challenges in the manufacturing field through ultra-fast inspection of mounted boards and system improvements utilizing RFID.

We will be exhibiting new products and technologies at the 38th NePCON Japan! 〇Industrial Equipment Division APT-1600FD Dual-Side Flying Probe Tester A flagship model that allows simultaneous inspection of both sides by placing probe heads on the top and bottom of the board. Utilizing OPC-UA (OPC Unified Architecture), our unique software links with customers' MES (Manufacturing Execution System) to collect and manage operational information in real-time (first-time exhibit). 〇RF Division RFID x IoT Data Service "RFID Work Performance Collection System" Data from IC tags can be sent to the cloud via MQTT just by placing them, enabling data collection. The collected data is visualized through a dashboard function, achieving "visualization of work performance." Since the reader/writer is autonomous, there is no need for a control PC or software development for both HF and UHF bands. Record management of items taken out with just a touch "Item Management System" Utilizing IC tags to reliably record the history of items taken out and returned, preventing omissions and errors in ledger entries, and supporting early detection of forgotten returns and losses. Efficient inventory checks are possible through bulk reading with RFID handheld devices. Many other exhibits are also planned.

• Measurement and Inspection

This is a flagship model that arranges probe heads above and below, enabling simultaneous in-circuit testing of both sides of the substrate.

Four probes are arranged on the top side of the substrate and two on the bottom side. Each probe can move freely and at high speed, achieving an astonishing inspection speed that is world-class in standard. By using the upper and lower flying probes simultaneously, a combination inspection of up to six probes allows for simultaneous contact inspection at both points on the top and bottom sides of the substrate. This significantly expands the inspection range and further accelerates inspection time. It is equipped with a wealth of features and boasts world-class standards in speed and positioning accuracy. ★You can bring your substrate to our demo room at our Okayama headquarters for evaluation testing★ We can conduct a series of tests including the creation of inspection programs, inspections using actual substrates, and summarizing evaluation results. If you are interested, please apply through the 'Contact Us' section below.

• Measurement and Inspection

Exhibiting at Nepcon 2024 from January 24! Achieving interoperability between industrial equipment and MES systems!

OPC UA (OPC Unified Architecture) is an open international standard developed for safe and reliable data exchange in industries such as industrial automation. It was announced by the OPC Foundation in 2008 and later standardized as IEC62541. It enables secure and highly reliable data exchange across various types of devices, operating systems, and manufacturers, making it recommended as the standard communication for Industrie 4.0 and increasingly adopted worldwide. Additionally, it is aligned with the international standard for PLCs, IEC61131-3, providing the advantage of high reliability in exchanging information from the manufacturing site with higher-level monitoring control systems and Manufacturing Execution Systems (MES). In response to this trend, Takaya has prepared an option to equip the APT series of flying probe testers with an OPC UA server. We are working to promote the adoption of industrial IoT standards that bridge FA equipment and IT.

• Measurement and Inspection

Programming for FPGAs and special performance tests such as BST can be handled with a flying probe tester.

This is an option that equips the underside operating axis of the APT-1600FD series with a dedicated fixture lifting mechanism. It allows for special inspections connected to external devices, such as Boundary Scan Testing (BST), as well as writing to and reading logs from ICs, to be performed in parallel with in-circuit testing. *Please refer to the YouTube video for an image of the operation.

• Measurement and Inspection

To customers considering the introduction of vehicle detection sensors for parking lot construction, design, or management: Are you facing any challenges with current issues or selecting the right sensors for parking management? Hotron offers free materials that explain how to utilize vehicle detection sensors and the benefits of their introduction! ▽ Here is the lineup of materials ◉ Vehicle Detection Sensor Basic Guide This guide focuses on the challenges and solutions in parking lot operations, introducing the overview of vehicle detection sensors. ◉ Key Points for Introducing Vehicle Detection Sensors This material discusses the benefits of introduction based on installation locations and specific challenges. ◉ Case Studies of Vehicle Detection Sensor Implementation This document presents the challenges before implementation and the results after introduction. For more details, please download from our website and check it out. https://www.hotron.co.jp/download/

The "HM-S6" is an embedded park sensor that detects vehicles through changes in magnetic flux and responds to various situations from passing to stationary vehicles. It can be used for the opening and closing of input doors at waste treatment plants, as well as for gates that vehicles pass through and outdoor parking applications. It can also be installed on rebar and steel plates. 【Features】 ■ Resistant to the effects of natural environments such as rain, snow, temperature changes, and geomagnetism ■ Protection rating IP68 reduces the risk of water ingress ■ Ten times the load capacity compared to conventional embedded park sensors (based on our comparison) ■ Can distinguish between vehicles even when they pass continuously ■ Can be installed on rebar and steel plates *For more details, please refer to the PDF document or feel free to contact us.

At a cabaret club located in Tokyo, we have introduced our diffusers to create a fragrant atmosphere within the floor. Because it is a special space that colors the nightlife, we pay attention not only to the interior design and lighting but also to the "scent of the space." The Majesta Fragrance diffuser rental service spreads high-quality scents throughout the store, enhancing the first impression of customers who visit. We create an exquisite space that makes them want to come back again. Many people might think, "Diffusers seem expensive," but with Majesta Fragrance, it is possible to introduce them at a reasonable price starting from 4,400 yen per month. Our service has received great acclaim for store branding and as a solution for odors from tobacco and alcohol. For those who want to "try it out to see if it matches the store's atmosphere," Majesta Fragrance offers a free trial installation. You can experience it in your store before considering a purchase. If you are interested in scenting your store or office and space branding, please feel free to contact us.

If you are considering "scent marketing (aroma branding)" for your store or office in Tochigi Prefecture, please leave it to Majesta Fragrance! Our company helps enhance the value of spaces through our rental service for commercial aroma diffusers. A one-week free trial installation is also available. If you are interested in scent marketing, please feel free to contact us!

We will be exhibiting at the "22nd Japan Fiber Material Research Seminar" to be held on May 22, 2026 (Friday). We plan to showcase dust protection clothing and other items. We look forward to your visit! ● Date: May 22, 2026 (Friday) 11:00 AM - 4:00 PM ● Venue: BDK Conference Room, 7th Floor, Buddhist Propagation Center Building, (Public Interest Incorporated Foundation) (Tokyo) 'Mi no Ma' For more details, please feel free to contact us through the related link below: [Protective Clothing Wisdom.com]. [Protective Clothing Wisdom.com] is a comprehensive information site for safe working environments, providing information on protective clothing and equipment by work environment, methods for putting on and taking off, and customer usage records.