Developed a carbon-neutral aluminum melting holding furnace [Published in the Iron and Steel News, October 23, 2023, page 5]

Introducing the forefront of development! Hydrogen combustion without carbon dioxide emissions! SHOEI is advancing the adaptation of its proven in-house burners for hydrogen use.

【New Development! Hydrogen Gas Burner Lineup】 ◇ High-Temperature Furnace Hydrogen Gas Burner (EIS-H2) Achieves a wide combustion range and stable combustion For heat treatment furnaces, melting furnaces, heating furnaces, deodorization devices, etc. ◇ Package Burner (BJ-H2) ◇ Fan-Equipped Package Burner (SP-H2) Provides stable flames even under high furnace pressure conditions, with good operability and maintainability; suitable for low-temperature fields such as drying furnaces, as well as various industrial furnaces and deodorization devices. ◇ Hydrogen Combustion Recuperative Burner (STBW-H2) Equipped with a waste heat recovery device (heat exchanger), capable of reducing fuel usage by about 30% in addition to decarbonization. Developed in collaboration with Tokyo Gas Co., Ltd. and Tokyo Gas Engineering Solutions Co., Ltd.! For aluminum melting holding furnaces, preheating, heat treatment furnaces, etc. ◇ Hydrogen Combustion Single-End Radiant Tube Burner (TRFH-H2) Indirect heating method utilizing radiant heat With an integrated heat exchanger, the burner efficiency is high at 75%. ◇ Hydrogen Combustion Duct Burner (SDC-H2) Converts duct burners mounted on hot air generation devices to hydrogen combustion Suitable for various drying furnaces such as painting drying and food drying.

• Hydrogen Production

In the face of uncertainty regarding future energy supply, we are advancing efforts towards high-efficiency "electrification" and "hybridization" based on gas combustion furnaces.

**Electrification of Thermal Equipment** In an uncertain future for energy supply, we are responding to high-efficiency electrification based on proven thermal equipment (combustion furnaces) to offer multiple options to our customers as an industrial furnace manufacturer. The electric hot air generator (AH-E) can replace our gas combustion type without significant changes to the equipment layout, allowing for electrification. **Hybrid Heating of Electric and Combustion Types** We have numerous achievements not only in fully electrifying thermal equipment but also in hybrid heating that combines the advantages of combustion types. We address challenges such as "securing green power, reducing costs, and ensuring power capacity" through hybrid solutions with combustion types. In addition to improving the efficiency of electric systems, energy-saving systems that utilize waste heat for gas burners are also possible. By incorporating hydrogen gas burners, we achieve carbon neutrality! **We Conduct Practical Verification Tests** We conduct various heating tests at the newly established "Thermal Technology Research Institute" within the Horyuji Center. Among these, the "QCO Test Facility" allows for heating tests with four different heat sources! We propose thermal equipment suitable for workpieces using gas, electric, hydrogen, and hybrid heat sources.

• Steel
• others
• Manufacturing Equipment

This time, the ACS-5000 is available as a facial recognition terminal compatible with FaceMe Security's add-on feature "Face Terminal," enabling access control management that combines "advanced anti-spoofing features" with high-speed facial recognition powered by edge AI. ■ Main Features 1. Accelerated Authentication Processing FaceMe Security is optimized for the MediaTek Genio 700's NPU, achieving faster facial recognition processing and reduced CPU load compared to processing with only the CPU. It ensures stable authentication without delays even during peak times, such as clocking in and out, contributing to alleviating congestion. 2. Advanced "Anti-Spoofing" Optimized for the IR + RGB camera mounted on the ACS-5000. It can quickly detect fraudulent authentication using photos, videos, or 3D masks within 0.6 seconds, ensuring reliable identity verification. 3. Door Control Without Additional Equipment FaceMe Security can directly control the digital I/O of the ACS-5000, allowing for the construction of an access control management system without the need for additional equipment. This simplifies system configuration and reduces implementation costs.

Do you have any concerns or requests regarding wired bed exit sensors? × Tangling or tripping over wired cables × Cable disconnection or damage × Worrying about forgetting to turn the switch back on after temporarily stopping the sensor. × Wanting to be notified of bed exits even from a location far from the nurse call outlet. Such concerns can be resolved simply by connecting our wireless nurse call linked set to the sensor! Our wireless nurse call linked set allows you to connect bed exit sensors like "Ugo-kun," "Foldable Thin Matta-kun," "Ayumi-chan," and "Just Place Pole-kun" to transmitters and receivers, reducing wiring around the bed area, alleviating concerns about tripping or falling due to cables, and contributing to a tidier work environment. Furthermore, it enables the use of bed exit sensors even from locations far from the nurse call outlet, allowing for more flexible equipment placement.

The non-contact beam touch sensor "HA-T401/HA-T520" has a compact detection range, making it an ideal automatic door sensor for installation on automatic doors facing narrow corridors or busy streets. Depending on the application and installation location, you can choose between "non-vision mounting type" and "non-vision built-in type." 【Features】 ● With the beam touch sensor, you can open and close the automatic door simply by bringing your hand close without touching it, ensuring hygiene. ● Depending on the installation environment, such as single sliding or bi-parting doors, the detection range can be set in four configurations: left, center, right, and a total of 12 spots. ● Two types of activation row settings are available to reduce unnecessary opening and closing of the automatic door due to cross traffic, contributing to energy-saving effects. ● The touch switch and infrared sensor are integrated, allowing for a switch between beam touch and infrared sensor with a single model. 【Recommended for such locations!】 ☑ Entrance facing a busy corridor ☑ Counter or sign near the door ☑ Buildings facing narrow corridors ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors ◎ For more details, please download the materials or contact us.

On our company's website introducing vehicle detection sensors, you can easily find products that meet your needs from three categories: "Purpose of Use," "Location of Use," and "Product List." [Introduction to Vehicle Detection Sensors] The sensors detect the passage of vehicles and notify you with a rotating light or switch the display of parking availability. They contribute to safe driving within parking lots and smooth operational management. They are used in various areas, from coin-operated parking to large-scale parking lots. We will continue to improve our webpage to provide information about Hotron's "Vehicle Detection Sensors."

The facility operating the nurse call system has made the bed exit sensor wireless, allowing it to notify in conjunction with the nurse call. By simply connecting the mat sensor "Foldable Thin Matt-kun," the body movement call "Ugo-kun," and the wheelchair body movement call "Ayumi-chan" to the transmitter HB-RS, you can make the bed exit sensor wireless. The infrared sensor "Just Place Pole-kun" has the transmitter HB-RS built-in. 【Features】 ○ Wireless conversion by simply connecting existing sensors to the transmitter HB-WSK. ○ The bed exit sensor notifies wirelessly in conjunction with the nurse call. ○ Up to 5 transmitters can be registered with one receiver. ○ The communication distance between the transmitter and receiver is approximately 10 meters. ◎ For more details, please contact us or download the catalog.