Recycled resin: High-quality PC, PPS, PEEK, PEI, etc., with a unique recycling technology established.

Aluminum nitride filler with high thermal conductivity and insulation properties.

This is an aluminum nitride filler that combines high thermal conductivity and insulation properties. Surface-treated products are also available to improve fillability and water resistance. ■ High Thermal Conductivity Large Particle Size Sintered Filler The filler, made by sintering aluminum nitride (AlN) micropowder into spherical shapes, excels in fillability into resins and can significantly increase thermal conductivity, making it suitable for applications such as heat dissipation sheets. As electronic components become smaller and more integrated, heat dissipation has become a major challenge, and aluminum nitride fillers contribute to improved heat dissipation. ■ High Purity Aluminum Nitride Powder This aluminum nitride filler is produced by the direct nitriding method. It is used in various fields, including electronic devices and semiconductor manufacturing equipment. We offer grades tailored for "sintering," "filler," and other applications to meet a variety of needs. Download the catalog here▼ https://www.matsuo-sangyo.co.jp/catalogs/ For product details, click here▼ https://www.matsuo-sangyo.co.jp/products/aluminum-nitride-filler/

• others

It has become possible to measure gel time while the sheets are in the form of glass fiber prepreg, carbon fiber prepreg, and so on.

Until now, it has been difficult to measure ultra-thin prepreg sheets and carbon fiber prepreg sheets, but it is now possible to measure gel time while keeping them in sheet form. Measurement of liquids and powders is also possible. - Direct measurement of sheet materials eliminates the need for powdering PCB prepreg. Direct measurement of PCB prepreg, carbon prepreg, etc. is possible. Measurement of RCC (resin-coated copper foil) is also possible. - Measurement from thin to thick materials with a single sheet. Supports from 10μm ultra-thin prepreg to thick non-woven fabrics. - Measurement of powder and liquid samples that were difficult with the stirring torque method. Broad compatibility with samples containing high-filled fillers, anaerobic samples, gel-like samples, etc. - Visualization of curing behavior through graphs. Calculates and graphs viscosity, phase difference, shear modulus, etc., from the measured stress. - Measurement of the viscoelasticity of fluids. Rheological measurement of non-Newtonian fluids such as samples that do not cure. - You can check stress, viscosity, and phase data. Download the catalog here▼ https://www.matsuo-sangyo.co.jp/catalogs/ For product details, click here▼ https://www.matsuo-sangyo.co.jp/products/gel-time-tester/

• others

(Japan Wood Preservation Association) Hachikusan MC A-4244 The update as of January 1, 2026, is now available. <Notice> We are pleased to announce that Hachikusan ME 2 has obtained certification from the Cultural Properties Insect & Fungus Damage Research Institute. The certificate is now available for viewing.

We will introduce the implementation results of the sensor technology developed by the Hotron Group, which has been cultivated over more than half a century, through customer case studies. In addition to automatic door sensors, we also offer a wide range of vehicle detection sensors and nursing/care sensors. We have many implementation examples available, so please take a look at the case study page.

Happy New Year! We would like to express our heartfelt gratitude for your support throughout the past year. This year, we will continue to strive for further improvements in product quality and service in all situations, including concrete pouring at construction sites. We kindly ask for your continued support and patronage. We wish you all good health and happiness, and we would like to take this opportunity to extend our New Year's greetings. We look forward to your continued support this year as well. Perry Japan Co., Ltd.

Thank you very much for visiting our company website and catalog, and for your interest in our diesel engine generators. From customer surveys, the most common feedback we received was: - I want to see the actual generators that have been installed. - I want to see them operating under real load. - I want to hear the opinions of companies that have installed them. - I want to see the generators in operation before making a purchase. After all, it’s understandable to feel worried about purchasing a generator without seeing the actual unit first, right? As the saying goes, "Seeing is believing," so we will be holding this tour. It will take place in that area of the Kanto region, where summer temperatures exceed 40°C. We successfully operated our generators this summer as well, so we are confident in handling the heat (sweat). Additionally, it has been confirmed that our generators equipped with the world-leading "Scania engine" are "fuel-efficient." This will surely help reduce daily operating costs. Please note that while we will provide kind and courteous assistance, the meeting and dispersal will be at the site (transportation costs and other expenses will be borne by the customer), so please understand this in advance. Contact: Kaneko

Regarding the "Automatic Stop Function after 10 Years" Automatic stop has been implemented in products manufactured from 2015 onwards. ■ Overview of Inspection Period Notification Function The dedicated controllers and timers for underfloor and attic ventilation fans sold since 2015 are equipped with the safety function mentioned on the left. Starting from November 2025, the automatic stop function will be activated sequentially for products manufactured in 2015. ■ Response Procedure at the Time of Automatic Stop It is expected that customers will contact the sales and installation stores. We ask that sales and installation stores respond according to the following procedures: 1. Conduct a safety inspection based on the "Underfloor and Attic Ventilation Fan Inspection Checklist." * Please ensure to check for looseness and retighten the connections of the controller and timer. If any liquids such as water, oil, or detergent have come into contact, the internal components may corrode, leading to fire hazards; therefore, replacement of the main unit is necessary. 2. If there are no issues, press and hold the set button to restart the operation. ■ Start of Shipment for Controllers/Timers with Inspection Period Notification Function For details regarding the shipment history of timers, please contact our company’s sales representative or quality control department.