松尾産業 List of News Articles

This is a recycled resin based on high-quality raw materials such as PC, PPS, PEEK, and PEI. It achieves engineering plastics and super engineering plastics that are comparable to virgin materials. We are engaged in material recycling of films, sheets, defective molded products, runners, and lumps generated in the factory from PC, PPS, and PEEK, allowing us to offer high-quality recycled resins that are on par with virgin materials. Additionally, we can also propose recycled resins of PEI, PMMA, PBT, and PFA. PC/PPS resins have obtained carbon footprint (CFP) certification through the SuMPO Environmental Label Program, reducing CO2 emissions in LCA to about 1/20 compared to virgin materials. Furthermore, we are also working on material recycling of market-recovered products, not just process edge materials. Since the materials used are primarily from semiconductor manufacturing processes, we can provide high-quality resins. For more details, please contact us.

We exhibited at "FilmTech Japan 2023," held from October 4 to 6. We showcased equipment themed around wet coating solutions and thermal solutions, as well as recycled resins and conductive diamonds. Thanks to everyone, we had a very large number of visitors to our booth over the three days, and we sincerely thank you.

A new model of the gel time measurement device has arrived. It is now possible to measure extremely thin prepreg sheets and carbon fiber prepreg sheets, which were previously difficult to measure, while they remain in sheet form. Of course, measurement of liquids and powders is also possible. Features: - Direct measurement of sheet materials: No need to powder PCB prepreg. You can directly measure PCB prepreg, carbon prepreg, and more. Measurement of RCC (resin-coated copper foil) is also possible. - Measurement from thin to thick materials with a single sheet. It accommodates everything from 10um ultra-thin prepreg to thick non-woven fabrics. - Measurement of powder and liquid samples that were difficult with the stirring torque method. It can handle a wide range of samples, including those with high filler content, anaerobic samples, and gel-like samples. - Visualization of curing behavior in graphs. It calculates and graphs viscosity, phase difference, shear modulus, etc., from the measured stress. - Measurement of the viscoelasticity of fluids. Rheological measurements of non-Newtonian fluids, such as samples that do not cure, are also possible. - Confirmation of stress, viscosity, and phase data. For more details, please download the catalog or contact us.

The specialized EC site for bar coaters, Tofu LABO, has been renewed! We offer bar coaters in core diameters of 1/4, 1/2, and 3/8, with multiple sizes available for selection. Additionally, our product lineup has been enhanced with bar coaters with handles, wireless bars, printing tables, bar storage racks, and more. ▼ Please purchase from here https://www.tofulabo.com/

We will hold the "first" presentation of our product at the N-Plus Exhibition (Tokyo Big Sight) seminar. Title: "ASTM D5470-17 Fully Compliant Thermal Resistance Measurement Thermal Interface Material Analyzer TIMA5" Date and Time: September 15 (Friday) 14:00 - 14:30 Please register for attendance using the related link below: Seminar Attendance Registration | N-Plus 2023 ▼ ■ N-Plus Exhibition Date: September 13 (Wednesday) - 15 (Friday), 2023 Location: Tokyo Big Sight, South Hall 3 Booth No.: F-06 Pre-registration (official URL): https://www.n-plus.biz/ Matsuo Industry Exhibition Page: https://www.n-plus.biz/search/index.php?p=detail&id=250 Exhibited Products: - Lab/Pilot Coater (Printing/Coating/Laminating) VCML - Multi Coater K303S - Gel Time Measurement Device - Thermal Interface Material Analyzer "TIMA5" - Recycled PC, PPS, PEEK, PEI Resins

The Thermal Interface Material Analyzer TIMA5 (from the German company NANOTEST) makes its debut in Japan! It can measure the thermal conductivity, thermal resistance, and interfacial thermal resistance of TIMs with thin films of less than 50μm in conditions close to actual products. We will showcase the actual device for the first time at the JASIS 2023 and N-Plus 2023 exhibitions. Additionally, the Thermo-Wave Analyzer TA series for measuring thermal diffusivity will also be exhibited at JASIS 2023. ■ JASIS 2023 Advanced Science, Analysis Systems & Solutions Exhibition Date: September 6 (Wednesday) to 8 (Friday), 2023 Location: Makuhari Messe Booth No.: HALL 6 S-50 Pre-registration for entry (official URL): https://www.jasis.jp/ Exhibited Products: - Thermal Interface Material Analyzer "TIMA5" - Thermo-Wave Analyzer TA series - Gel time measurement device - Aluminum Nitride (AlN) We look forward to your participation.

You can request a quote or purchase bar coaters and wireless bars from our online shop. Product lineup ■ Bar Coater (Wire Bar) Available in core diameters of 1/4 inch, 1/2 inch, and 3/8 inch. Various sizes are in stock. ■ Select Roller Easily achieve uniform thin film application! No disconnection with the wireless bar. Cleaning and maintenance are also a breeze! ■ A-Bar High cleanability, no wire breakage, and long-lasting wireless bar. Please purchase from the following page: http://www.tofulabo.com/

Exhibition details and visitor registration here ▼ https://acs-l.jp/corp/matsuo-sangyo/convertech23.html The "Converting Technology Comprehensive Exhibition 2023" is a comprehensive exhibition focused on technologies, materials, and equipment for processing web and sheet materials such as films, sheets, metal foils, paper and cardboard, non-woven fabrics, and synthetic paper. We will also be presenting at the exhibitor pitch presentation on "Well-being and Manufacturing" at the special venue on February 3 (Friday). ◆ Event Period: February 1 (Wednesday) to February 3 (Friday), 2023, 10:00 AM - 5:00 PM ◆ Venue and Exhibition Location: Tokyo Big Sight, East Hall, Booth Number 3U-12 ◆ Exhibited Products: - Lab/Pilot Coater VCML - K303S Multi Coater - Fresh Keep Proof 100 - GP100 High-Speed Gravure Proofer - Bar Coater - Portable Contact Angle Meter - Gel Time Automatic Measurement Device "Madoka" - Thermal Diffusivity Measurement ◆ First-time Exhibits: - UV-LED Irradiator - Infrared Moisture Meter - Film Tester - Continuous Thickness Measurement Device (Contact and Non-contact) - Special Compound Technology - Diamond Electrode

Details of the exhibition and exhibited products, as well as visitor registration, can be found here ▼ https://acs-l.jp/corp/matsuo-sangyo/plagum23.html ◆ Event Date and Time: Day 1: February 9, 2023 (Thursday) 13:30 - 17:00 (Two sessions) Day 2: February 10, 2023 (Friday) 10:00 - 16:00 (Three sessions) ◆ Additional Information on Event Date and Time: *Pre-registration is required. ◆ Venue: Osaka Sangyo Sōzōkan 3F & 4F *Reception is on the 4th floor. Exhibition Booth: 4F, Booth 5 ◆ Official Website: https://www.sansokan.jp/events/eve_detail.san?H_A_NO=38971 ◆ Exhibits 'Automatic Curing Time (Gel Time) Measurement Device "Madoka"' Easy operation, good reproducibility, and confirmation of curing behavior. Capable of measuring a wide range of resins such as epoxy, silicone, phenol, PVC, and urethane. 'Special Compound Technology' Special compounds for thermoplastic resins (thermal conductivity, dielectric properties, cellulose fibers, etc.) We look forward to your visit.